123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287 |
- /* apps/gendsa.c */
- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
- #include <openssl/opensslconf.h> /* for OPENSSL_NO_DSA */
- #ifndef OPENSSL_NO_DSA
- # include <stdio.h>
- # include <string.h>
- # include <sys/types.h>
- # include <sys/stat.h>
- # include "apps.h"
- # include <openssl/bio.h>
- # include <openssl/err.h>
- # include <openssl/bn.h>
- # include <openssl/dsa.h>
- # include <openssl/x509.h>
- # include <openssl/pem.h>
- # define DEFBITS 512
- # undef PROG
- # define PROG gendsa_main
- int MAIN(int, char **);
- int MAIN(int argc, char **argv)
- {
- DSA *dsa = NULL;
- int ret = 1;
- char *outfile = NULL;
- char *inrand = NULL, *dsaparams = NULL;
- char *passargout = NULL, *passout = NULL;
- BIO *out = NULL, *in = NULL;
- const EVP_CIPHER *enc = NULL;
- # ifndef OPENSSL_NO_ENGINE
- char *engine = NULL;
- # endif
- apps_startup();
- if (bio_err == NULL)
- if ((bio_err = BIO_new(BIO_s_file())) != NULL)
- BIO_set_fp(bio_err, stderr, BIO_NOCLOSE | BIO_FP_TEXT);
- if (!load_config(bio_err, NULL))
- goto end;
- argv++;
- argc--;
- for (;;) {
- if (argc <= 0)
- break;
- if (strcmp(*argv, "-out") == 0) {
- if (--argc < 1)
- goto bad;
- outfile = *(++argv);
- } else if (strcmp(*argv, "-passout") == 0) {
- if (--argc < 1)
- goto bad;
- passargout = *(++argv);
- }
- # ifndef OPENSSL_NO_ENGINE
- else if (strcmp(*argv, "-engine") == 0) {
- if (--argc < 1)
- goto bad;
- engine = *(++argv);
- }
- # endif
- else if (strcmp(*argv, "-rand") == 0) {
- if (--argc < 1)
- goto bad;
- inrand = *(++argv);
- } else if (strcmp(*argv, "-") == 0)
- goto bad;
- # ifndef OPENSSL_NO_DES
- else if (strcmp(*argv, "-des") == 0)
- enc = EVP_des_cbc();
- else if (strcmp(*argv, "-des3") == 0)
- enc = EVP_des_ede3_cbc();
- # endif
- # ifndef OPENSSL_NO_IDEA
- else if (strcmp(*argv, "-idea") == 0)
- enc = EVP_idea_cbc();
- # endif
- # ifndef OPENSSL_NO_SEED
- else if (strcmp(*argv, "-seed") == 0)
- enc = EVP_seed_cbc();
- # endif
- # ifndef OPENSSL_NO_AES
- else if (strcmp(*argv, "-aes128") == 0)
- enc = EVP_aes_128_cbc();
- else if (strcmp(*argv, "-aes192") == 0)
- enc = EVP_aes_192_cbc();
- else if (strcmp(*argv, "-aes256") == 0)
- enc = EVP_aes_256_cbc();
- # endif
- # ifndef OPENSSL_NO_CAMELLIA
- else if (strcmp(*argv, "-camellia128") == 0)
- enc = EVP_camellia_128_cbc();
- else if (strcmp(*argv, "-camellia192") == 0)
- enc = EVP_camellia_192_cbc();
- else if (strcmp(*argv, "-camellia256") == 0)
- enc = EVP_camellia_256_cbc();
- # endif
- else if (**argv != '-' && dsaparams == NULL) {
- dsaparams = *argv;
- } else
- goto bad;
- argv++;
- argc--;
- }
- if (dsaparams == NULL) {
- bad:
- BIO_printf(bio_err, "usage: gendsa [args] dsaparam-file\n");
- BIO_printf(bio_err, " -out file - output the key to 'file'\n");
- # ifndef OPENSSL_NO_DES
- BIO_printf(bio_err,
- " -des - encrypt the generated key with DES in cbc mode\n");
- BIO_printf(bio_err,
- " -des3 - encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
- # endif
- # ifndef OPENSSL_NO_IDEA
- BIO_printf(bio_err,
- " -idea - encrypt the generated key with IDEA in cbc mode\n");
- # endif
- # ifndef OPENSSL_NO_SEED
- BIO_printf(bio_err, " -seed\n");
- BIO_printf(bio_err,
- " encrypt PEM output with cbc seed\n");
- # endif
- # ifndef OPENSSL_NO_AES
- BIO_printf(bio_err, " -aes128, -aes192, -aes256\n");
- BIO_printf(bio_err,
- " encrypt PEM output with cbc aes\n");
- # endif
- # ifndef OPENSSL_NO_CAMELLIA
- BIO_printf(bio_err, " -camellia128, -camellia192, -camellia256\n");
- BIO_printf(bio_err,
- " encrypt PEM output with cbc camellia\n");
- # endif
- # ifndef OPENSSL_NO_ENGINE
- BIO_printf(bio_err,
- " -engine e - use engine e, possibly a hardware device.\n");
- # endif
- BIO_printf(bio_err, " -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR,
- LIST_SEPARATOR_CHAR);
- BIO_printf(bio_err,
- " - load the file (or the files in the directory) into\n");
- BIO_printf(bio_err, " the random number generator\n");
- BIO_printf(bio_err, " dsaparam-file\n");
- BIO_printf(bio_err,
- " - a DSA parameter file as generated by the dsaparam command\n");
- goto end;
- }
- # ifndef OPENSSL_NO_ENGINE
- setup_engine(bio_err, engine, 0);
- # endif
- if (!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
- BIO_printf(bio_err, "Error getting password\n");
- goto end;
- }
- in = BIO_new(BIO_s_file());
- if (!(BIO_read_filename(in, dsaparams))) {
- perror(dsaparams);
- goto end;
- }
- if ((dsa = PEM_read_bio_DSAparams(in, NULL, NULL, NULL)) == NULL) {
- BIO_printf(bio_err, "unable to load DSA parameter file\n");
- goto end;
- }
- BIO_free(in);
- in = NULL;
- out = BIO_new(BIO_s_file());
- if (out == NULL)
- goto end;
- if (outfile == NULL) {
- BIO_set_fp(out, stdout, BIO_NOCLOSE);
- # ifdef OPENSSL_SYS_VMS
- {
- BIO *tmpbio = BIO_new(BIO_f_linebuffer());
- out = BIO_push(tmpbio, out);
- }
- # endif
- } else {
- if (BIO_write_filename(out, outfile) <= 0) {
- perror(outfile);
- goto end;
- }
- }
- if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL) {
- BIO_printf(bio_err,
- "warning, not much extra random data, consider using the -rand option\n");
- }
- if (inrand != NULL)
- BIO_printf(bio_err, "%ld semi-random bytes loaded\n",
- app_RAND_load_files(inrand));
- BIO_printf(bio_err, "Generating DSA key, %d bits\n", BN_num_bits(dsa->p));
- if (!DSA_generate_key(dsa))
- goto end;
- app_RAND_write_file(NULL, bio_err);
- if (!PEM_write_bio_DSAPrivateKey(out, dsa, enc, NULL, 0, NULL, passout))
- goto end;
- ret = 0;
- end:
- if (ret != 0)
- ERR_print_errors(bio_err);
- if (in != NULL)
- BIO_free(in);
- if (out != NULL)
- BIO_free_all(out);
- if (dsa != NULL)
- DSA_free(dsa);
- if (passout)
- OPENSSL_free(passout);
- apps_shutdown();
- OPENSSL_EXIT(ret);
- }
- #else /* !OPENSSL_NO_DSA */
- # if PEDANTIC
- static void *dummy = &dummy;
- # endif
- #endif
|