# configure.ac
#
# Copyright (C) 2006-2013 wolfSSL Inc.
#
# This file is part of CyaSSL.
#
#

AC_INIT([cyassl],[2.8.1],[http://www.yassl.com])

AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_MACRO_DIR([m4])

AC_CANONICAL_TARGET
AC_USE_SYSTEM_EXTENSIONS

AM_INIT_AUTOMAKE([1.11 -Wall -Werror -Wno-portability foreign tar-ustar subdir-objects])

AC_CANONICAL_HOST
AC_CANONICAL_BUILD

AC_PREREQ([2.63])


AC_CONFIG_HEADERS([config.h:config.in])dnl Keep filename to 8.3 for MS-DOS.


#shared library versioning
CYASSL_LIBRARY_VERSION=5:2:0
#                      | | |
#               +------+ | +---+
#               |        |     |
#              current:revision:age
#               |        |     |
#               |        |     +- increment if interfaces have been added
#               |        |        set to zero if interfaces have been removed
#                        |        or changed
#               |        +- increment if source code has changed
#               |           set to zero if current is incremented
#               +- increment if interfaces have been added, removed or changed
AC_SUBST([CYASSL_LIBRARY_VERSION])

# capture user C_EXTRA_FLAGS from ./configure line, CFLAGS may hold -g -O2 even
# if user doesn't override, no way to tell
USER_C_EXTRA_FLAGS="$C_EXTRA_FLAGS"

LT_PREREQ([2.2])
LT_INIT([disable-static],[win32-dll])
LT_LANG([C++])
LT_LANG([C])

gl_VISIBILITY
AS_IF([ test -n "$CFLAG_VISIBILITY" ], [
       AM_CPPFLAGS="$AM_CPPFLAGS $CFLAG_VISIBILITY"
       CPPFLAGS="$CPPFLAGS $CFLAG_VISIBILITY"
       ])

m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])

AX_CXX_COMPILER_VERSION

AC_CHECK_FUNCS([gethostbyname])
AC_CHECK_FUNCS([getaddrinfo])
AC_CHECK_FUNCS([gettimeofday])
AC_CHECK_FUNCS([inet_ntoa])
AC_CHECK_FUNCS([memset])
AC_CHECK_FUNCS([socket])
AC_CHECK_HEADERS([arpa/inet.h])
AC_CHECK_HEADERS([fcntl.h])
AC_CHECK_HEADERS([limits.h])
AC_CHECK_HEADERS([netdb.h])
AC_CHECK_HEADERS([netinet/in.h])
AC_CHECK_HEADERS([stddef.h])
AC_CHECK_HEADERS([sys/ioctl.h])
AC_CHECK_HEADERS([sys/socket.h])
AC_CHECK_HEADERS([sys/time.h])
AC_CHECK_HEADERS([errno.h])
AC_CHECK_LIB(network,socket)
AC_CHECK_SIZEOF(long long, 8)
AC_CHECK_SIZEOF(long, 4)
AC_C_BIGENDIAN
# mktime check takes forever on some systems, if time supported it would be
# highly unusual for mktime to be missing
#AC_FUNC_MKTIME 

AC_PROG_CC
AC_PROG_CC_C_O
AC_PROG_CXX
AC_PROG_INSTALL
AC_TYPE_SIZE_T
AC_TYPE_UINT8_T
AM_PROG_AS
AM_PROG_CC_C_O
LT_LIB_M

OPTIMIZE_CFLAGS="-Os -fomit-frame-pointer"
OPTIMIZE_FAST_CFLAGS="-O2 -fomit-frame-pointer"
OPTIMIZE_HUGE_CFLAGS="-funroll-loops -DTFM_SMALL_SET -DTFM_HUGE_SET"
DEBUG_CFLAGS="-g -DDEBUG -DDEBUG_CYASSL"


# DEBUG
AX_DEBUG
AS_IF([test "$ax_enable_debug" = "yes"],
      [AM_CFLAGS="$DEBUG_CFLAGS $AM_CFLAGS"],
      [AM_CFLAGS="$AM_CFLAGS -DNDEBUG"])


# SINGLE THREADED
AC_ARG_ENABLE([singlethreaded],
    [  --enable-singlethreaded Enable CyaSSL single threaded (default: disabled)],
    [ ENABLED_SINGLETHREADED=$enableval ],
    [ ENABLED_SINGLETHREADED=no ])

AS_IF([ test "x$ENABLED_SINGLETHREADED" = "xno" ],[
       AX_PTHREAD([
                   AC_DEFINE([HAVE_PTHREAD], [1], [Define if you have POSIX threads libraries and header files.])
                   AM_CFLAGS="-D_POSIX_THREADS $AM_CFLAGS $PTHREAD_CFLAGS"
                   LIBS="$LIBS $PTHREAD_LIBS"
                   ],[
                      ENABLED_SINGLETHREADED=yes
                      ])
       ])

AS_IF([ test "x$ENABLED_SINGLETHREADED" = "xyes" ],[ AM_CFLAGS="-DSINGLE_THREADED $AM_CFLAGS" ])


# DTLS
AC_ARG_ENABLE([dtls],
    [  --enable-dtls           Enable CyaSSL DTLS (default: disabled)],
    [ ENABLED_DTLS=$enableval ],
    [ ENABLED_DTLS=no ]
    )
if test "$ENABLED_DTLS" = "yes"
then
  AM_CFLAGS="-DCYASSL_DTLS $AM_CFLAGS"
fi


# OPENSSL Extra Compatibility
AC_ARG_ENABLE([opensslextra],
    [  --enable-opensslextra   Enable extra OpenSSL API, size+ (default: disabled)],
    [ ENABLED_OPENSSLEXTRA=$enableval ],
    [ ENABLED_OPENSSLEXTRA=no ]
    )
if test "$ENABLED_OPENSSLEXTRA" = "yes"
then
  AM_CFLAGS="-DOPENSSL_EXTRA $AM_CFLAGS"
fi

if test "$ENABLED_OPENSSLEXTRA" = "yes" && test "$ENABLED_SMALL" = "yes"
then
    AC_MSG_ERROR([cannot enable small and opensslextra, only one or the other.])
fi


# IPv6 Test Apps
AC_ARG_ENABLE([ipv6],
    [  --enable-ipv6           Enable testing of IPV6 (default: disabled)],
    [ ENABLED_IPV6=$enableval ],
    [ ENABLED_IPV6=no ]
    )

if test "$ENABLED_IPV6" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DTEST_IPV6"
fi


# Fortress build 
AC_ARG_ENABLE([fortress],
    [  --enable-fortress       Enable SSL fortress build (default: disabled)],
    [ ENABLED_FORTRESS=$enableval ],
    [ ENABLED_FORTRESS=no ]
    )

if test "$ENABLED_FORTRESS" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DFORTRESS -DOPENSSL_EXTRA -DCYASSL_DES_ECB -DCYASSL_AES_COUNTER -DCYASSL_AES_DIRECT -DCYASSL_DER_LOAD -DCYASSL_SHA512 -DCYASSL_SHA384 -DCYASSL_KEY_GEN"
fi


# ssl bump build 
AC_ARG_ENABLE([bump],
    [  --enable-bump           Enable SSL Bump build (default: disabled)],
    [ ENABLED_BUMP=$enableval ],
    [ ENABLED_BUMP=no ]
    )

if test "$ENABLED_BUMP" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DLARGE_STATIC_BUFFERS -DCYASSL_CERT_GEN -DCYASSL_KEY_GEN -DHUGE_SESSION_CACHE -DOPENSSL_EXTRA -DFP_MAX_BITS=8192 -DCYASSL_DER_LOAD -DCYASSL_ALT_NAMES -DCYASSL_TEST_CERT"
fi

ENABLED_SLOWMATH="yes"

# lean psk build 
AC_ARG_ENABLE([leanpsk],
    [  --enable-leanpsk        Enable Lean PSK build (default: disabled)],
    [ ENABLED_LEANPSK=$enableval ],
    [ ENABLED_LEANPSK=no ]
    )

if test "$ENABLED_LEANPSK" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_LEANPSK -DHAVE_NULL_CIPHER -DSINGLE_THREADED -DNO_AES -DNO_FILESYSTEM -DNO_RABBIT -DNO_RSA -DNO_DSA -DNO_DH -DNO_CERTS -DNO_PWDBASED -DNO_DES3 -DNO_MD4 -DNO_MD5 -DNO_ERROR_STRINGS -DNO_OLD_TLS -DNO_RC4 -DNO_WRITEV -DNO_SESSION_CACHE -DNO_DEV_RANDOM -DCYASSL_USER_IO -DNO_SHA -DUSE_SLOW_SHA"
    ENABLED_SLOWMATH="no"
    ENABLED_SINGLETHREADED="yes"
fi

AM_CONDITIONAL([BUILD_LEANPSK], [test "x$ENABLED_LEANPSK" = "xyes"])


# big cache
AC_ARG_ENABLE([bigcache],
    [  --enable-bigcache       Enable big session cache (default: disabled)],
    [ ENABLED_BIGCACHE=$enableval ],
    [ ENABLED_BIGCACHE=no ]
    )

if test "$ENABLED_BIGCACHE" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DBIG_SESSION_CACHE"
fi


# HUGE cache
AC_ARG_ENABLE([hugecache],
    [  --enable-hugecache      Enable huge session cache (default: disabled)],
    [ ENABLED_HUGECACHE=$enableval ],
    [ ENABLED_HUGECACHE=no ]
    )

if test "$ENABLED_HUGECACHE" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHUGE_SESSION_CACHE"
fi


# SMALL cache
AC_ARG_ENABLE([smallcache],
    [  --enable-smallcache     Enable small session cache (default: disabled)],
    [ ENABLED_SMALLCACHE=$enableval ],
    [ ENABLED_SMALLCACHE=no ]
    )

if test "$ENABLED_SMALLCACHE" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DSMALL_SESSION_CACHE"
fi


# Persistent session cache 
AC_ARG_ENABLE([savesession],
    [  --enable-savesession    Enable persistent session cache (default: disabled)],
    [ ENABLED_SAVESESSION=$enableval ],
    [ ENABLED_SAVESESSION=no ]
    )

if test "$ENABLED_SAVESESSION" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DPERSIST_SESSION_CACHE"
fi


# Persistent cert cache 
AC_ARG_ENABLE([savecert],
    [  --enable-savecert       Enable persistent cert cache (default: disabled)],
    [ ENABLED_SAVECERT=$enableval ],
    [ ENABLED_SAVECERT=no ]
    )

if test "$ENABLED_SAVECERT" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DPERSIST_CERT_CACHE"
fi


# Atomic User Record Layer  
AC_ARG_ENABLE([atomicuser],
    [  --enable-atomicuser     Enable Atomic User Record Layer (default: disabled)],
    [ ENABLED_ATOMICUSER=$enableval ],
    [ ENABLED_ATOMICUSER=no ]
    )

if test "$ENABLED_ATOMICUSER" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DATOMIC_USER"
fi


# Public Key Callbacks  
AC_ARG_ENABLE([pkcallbacks],
    [  --enable-pkcallbacks    Enable Public Key Callbacks (default: disabled)],
    [ ENABLED_PKCALLBACKS=$enableval ],
    [ ENABLED_PKCALLBACKS=no ]
    )

if test "$ENABLED_PKCALLBACKS" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_PK_CALLBACKS"
fi


# SNIFFER
AC_ARG_ENABLE([sniffer],
              [AS_HELP_STRING([--enable-sniffer],[ Enable CyaSSL sniffer support (default: disabled) ])],[
               AS_IF([ test "x$enableval" = "xyes" ],[ AC_CHECK_HEADERS([pcap/pcap.h],[ 
                      ENABLED_SNIFFER=yes 
                      AM_CFLAGS="$AM_CFLAGS -DCYASSL_SNIFFER -DOPENSSL_EXTRA"
                      ],[ ENABLED_SNIFFER=no ]) ])
               ],[
                  ENABLED_SNIFFER=no
                  ])

AM_CONDITIONAL([BUILD_SNIFFER], [ test "x$ENABLED_SNIFFER" = "xyes" ])

# AES-GCM
AC_ARG_ENABLE([aesgcm],
    [  --enable-aesgcm         Enable CyaSSL AES-GCM support (default: disabled)],
    [ ENABLED_AESGCM=$enableval ],
    [ ENABLED_AESGCM=no ]
    )

if test "$ENABLED_AESGCM" = "word32"
then
    AM_CFLAGS="$AM_CFLAGS -DGCM_WORD32"
    ENABLED_AESGCM=yes
fi

if test "$ENABLED_AESGCM" = "small"
then
    AM_CFLAGS="$AM_CFLAGS -DGCM_SMALL"
    ENABLED_AESGCM=yes
fi

if test "$ENABLED_AESGCM" = "table"
then
    AM_CFLAGS="$AM_CFLAGS -DGCM_TABLE"
    ENABLED_AESGCM=yes
fi

if test "$ENABLED_AESGCM" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_AESGCM"
fi

AM_CONDITIONAL([BUILD_AESGCM], [test "x$ENABLED_AESGCM" = "xyes"])


# AES-CCM
AC_ARG_ENABLE([aesccm],
    [  --enable-aesccm         Enable CyaSSL AES-CCM support (default: disabled)],
    [ ENABLED_AESCCM=$enableval ],
    [ ENABLED_AESCCM=no ]
    )

if test "$ENABLED_AESCCM" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_AESCCM"
fi

AM_CONDITIONAL([BUILD_AESCCM], [test "x$ENABLED_AESCCM" = "xyes"])


# AES-NI
AC_ARG_ENABLE([aesni],
    [  --enable-aesni          Enable CyaSSL AES-NI support (default: disabled)],
    [ ENABLED_AESNI=$enableval ],
    [ ENABLED_AESNI=no ]
    )

if test "$ENABLED_AESNI" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_AESNI"
    if test "$GCC" = "yes"
    then
        # GCC needs these flags, icc doesn't
        # opt levels greater than 2 may cause problems on systems w/o aesni
        AM_CFLAGS="$AM_CFLAGS -maes -msse4"
    fi
fi

AM_CONDITIONAL([BUILD_AESNI], [test "x$ENABLED_AESNI" = "xyes"])


# Camellia
AC_ARG_ENABLE([camellia],
    [  --enable-camellia       Enable CyaSSL Camellia support (default: disabled)],
    [ ENABLED_CAMELLIA=$enableval ],
    [ ENABLED_CAMELLIA=no ]
    )

if test "$ENABLED_CAMELLIA" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_CAMELLIA"
fi

AM_CONDITIONAL([BUILD_CAMELLIA], [test "x$ENABLED_CAMELLIA" = "xyes"])


# MD2
AC_ARG_ENABLE([md2],
    [  --enable-md2            Enable CyaSSL MD2 support (default: disabled)],
    [ ENABLED_MD2=$enableval ],
    [ ENABLED_MD2=no ]
    )

if test "$ENABLED_BUMP" = "yes"
then
    ENABLED_MD2="yes"
fi

if test "$ENABLED_MD2" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_MD2"
fi

AM_CONDITIONAL([BUILD_MD2], [test "x$ENABLED_MD2" = "xyes"])


# NULL CIPHER 
AC_ARG_ENABLE([nullcipher],
    [  --enable-nullcipher     Enable CyaSSL NULL cipher support (default: disabled)],
    [ ENABLED_NULL_CIPHER=$enableval ],
    [ ENABLED_NULL_CIPHER=no ]
    )

if test "$ENABLED_NULL_CIPHER" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_NULL_CIPHER"
fi

# RIPEMD
AC_ARG_ENABLE([ripemd],
    [  --enable-ripemd         Enable CyaSSL RIPEMD-160 support (default: disabled)],
    [ ENABLED_RIPEMD=$enableval ],
    [ ENABLED_RIPEMD=no ]
    )

if test "$ENABLED_RIPEMD" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_RIPEMD"
fi

AM_CONDITIONAL([BUILD_RIPEMD], [test "x$ENABLED_RIPEMD" = "xyes"])


# BLAKE2
AC_ARG_ENABLE([blake2],
    [  --enable-blake2         Enable CyaSSL BLAKE2 support (default: disabled)],
    [ ENABLED_BLAKE2=$enableval ],
    [ ENABLED_BLAKE2=no ]
    )

if test "$ENABLED_BLAKE2" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_BLAKE2"
fi

AM_CONDITIONAL([BUILD_BLAKE2], [test "x$ENABLED_BLAKE2" = "xyes"])


# SHA512
AC_ARG_ENABLE([sha512],
    [  --enable-sha512         Enable CyaSSL SHA-512 support (default: disabled)],
    [ ENABLED_SHA512=$enableval ],
    [ ENABLED_SHA512=no ]
    )

if test "$ENABLED_SHA512" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_SHA512 -DCYASSL_SHA384"
fi

if test "$ENABLED_FORTRESS" = "yes"
then
    ENABLED_SHA512="yes"
fi


AM_CONDITIONAL([BUILD_SHA512], [test "x$ENABLED_SHA512" = "xyes"])


# SESSION CERTS
AC_ARG_ENABLE([sessioncerts],
    [  --enable-sessioncerts   Enable session cert storing (default: disabled)],
    [ ENABLED_SESSIONCERTS=$enableval ],
    [ ENABLED_SESSIONCERTS=no ]
    )

if test "$ENABLED_SESSIONCERTS" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DSESSION_CERTS"
fi


# KEY GENERATION
AC_ARG_ENABLE([keygen],
    [  --enable-keygen         Enable key generation (default: disabled)],
    [ ENABLED_KEYGEN=$enableval ],
    [ ENABLED_KEYGEN=no ]
    )

if test "$ENABLED_KEYGEN" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_KEY_GEN"
fi


# CERT GENERATION
AC_ARG_ENABLE([certgen],
    [  --enable-certgen        Enable cert generation (default: disabled)],
    [ ENABLED_CERTGEN=$enableval ],
    [ ENABLED_CERTGEN=no ]
    )

if test "$ENABLED_CERTGEN" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_CERT_GEN"
fi


# SEP
AC_ARG_ENABLE([sep],
    [  --enable-sep            Enable sep extensions (default: disabled)],
    [ ENABLED_SEP=$enableval ],
    [ ENABLED_SEP=no ]
    )
if test "$ENABLED_SEP" = "yes"
then
  AM_CFLAGS="-DCYASSL_SEP -DKEEP_PEER_CERT $AM_CFLAGS"
fi


# DSA
AC_ARG_ENABLE([dsa],
    [  --enable-dsa            Enable DSA (default: disabled)],
    [ ENABLED_DSA=$enableval ],
    [ ENABLED_DSA=no ]
    )

if test "$ENABLED_DSA" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_DSA"
fi

AM_CONDITIONAL([BUILD_DSA], [test "x$ENABLED_DSA" = "xyes"])


# ECC 
AC_ARG_ENABLE([ecc],
    [  --enable-ecc            Enable ECC (default: disabled)],
    [ ENABLED_ECC=$enableval ],
    [ ENABLED_ECC=no ]
    )

if test "$ENABLED_ECC" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_ECC -DTFM_ECC256 -DECC_SHAMIR"
fi

AM_CONDITIONAL([BUILD_ECC], [test "x$ENABLED_ECC" = "xyes"])


if test "$ENABLED_ECC" = "yes" && test "$ENABLED_SMALL" = "yes"
then
    AC_MSG_ERROR([cannot enable ecc and small, ecc requires TLS which small turns off.]) 
fi


# FP ECC, Fixed Point cache ECC 
AC_ARG_ENABLE([fpecc],
    [  --enable-fpecc          Enable Fixed Point cache ECC (default: disabled)],
    [ ENABLED_FPECC=$enableval ],
    [ ENABLED_FPECC=no ]
    )

if test "$ENABLED_FPECC" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DFP_ECC"
fi


# PSK 
AC_ARG_ENABLE([psk],
    [  --enable-psk            Enable PSK (default: disabled)],
    [ ENABLED_PSK=$enableval ],
    [ ENABLED_PSK=no ]
    )

if test "$ENABLED_PSK" = "no" && test "$ENABLED_LEANPSK" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_PSK"
fi

if test "$ENABLED_PSK" = "no" && test "$ENABLED_LEANPSK" = "yes"
then
    ENABLED_PSK=yes
fi


# ERROR STRINGS
AC_ARG_ENABLE([errorstrings],
    [  --enable-errorstrings   Enable error strings table (default: enabled)],
    [ ENABLED_ERROR_STRINGS=$enableval ],
    [ ENABLED_ERROR_STRINGS=yes ]
    )

if test "$ENABLED_ERROR_STRINGS" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_ERROR_STRINGS"
else
    # turn off error strings if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_ERROR_STRINGS"
        ENABLED_ERROR_STRINGS=no
    fi
fi


# OLD TLS 
AC_ARG_ENABLE([oldtls],
    [  --enable-oldtls         Enable old TLS versions < 1.2 (default: enabled)],
    [ ENABLED_OLD_TLS=$enableval ],
    [ ENABLED_OLD_TLS=yes ]
    )

if test "$ENABLED_OLD_TLS" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_OLD_TLS"
else
    # turn off old if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_OLD_TLS"
        ENABLED_OLD_TLS=no
    fi
fi


# STACK SIZE info for examples 
AC_ARG_ENABLE([stacksize],
    [  --enable-stacksize      Enable stack size info on examples (default: disabled)],
    [ ENABLED_STACKSIZE=$enableval ],
    [ ENABLED_STACKSIZE=no ]
    )

if test "$ENABLED_STACKSIZE" = "yes"
then
    AC_CHECK_FUNC([posix_memalign], [], [AC_MSG_ERROR(stacksize needs posix_memalign)])
    AC_CHECK_FUNC([pthread_attr_setstack], [], AC_CHECK_LIB([pthread],[pthread_attr_setstack]))
    AM_CFLAGS="$AM_CFLAGS -DHAVE_STACK_SIZE -DCYASSL_LOW_MEMORY"
fi


# MEMORY 
AC_ARG_ENABLE([memory],
    [  --enable-memory         Enable memory callbacks (default: enabled)],
    [ ENABLED_MEMORY=$enableval ],
    [ ENABLED_MEMORY=yes ]
    )

if test "$ENABLED_MEMORY" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_CYASSL_MEMORY"
else
    # turn off memory cb if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        # but don't turn on NO_CYASSL_MEMORY because using own
        ENABLED_MEMORY=no
    fi
fi

AM_CONDITIONAL([BUILD_MEMORY], [test "x$ENABLED_MEMORY" = "xyes"])


# RSA 
AC_ARG_ENABLE([rsa],
    [  --enable-rsa            Enable RSA (default: enabled)],
    [ ENABLED_RSA=$enableval ],
    [ ENABLED_RSA=yes ]
    )

if test "$ENABLED_RSA" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_RSA"
else
    # turn off RSA if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_RSA"
        ENABLED_RSA=no
    fi
fi

AM_CONDITIONAL([BUILD_RSA], [test "x$ENABLED_RSA" = "xyes"])


# DH
AC_ARG_ENABLE([dh],
    [  --enable-dh             Enable DH (default: enabled)],
    [ ENABLED_DH=$enableval ],
    [ ENABLED_DH=yes ]
    )

if test "$ENABLED_DH" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_DH"
else
    # turn off DH if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_DH"
        ENABLED_DH=no
    fi
fi

AM_CONDITIONAL([BUILD_DH], [test "x$ENABLED_DH" = "xyes"])


# ASN
# turn off asn, which means no certs, no rsa, no dh, no dsa, no ecc,
# and no big int, use this to disable all public key stuff
AC_ARG_ENABLE([asn],
    [  --enable-asn            Enable ASN (default: enabled)],
    [ ENABLED_ASN=$enableval ],
    [ ENABLED_ASN=yes ]
    )

if test "$ENABLED_ASN" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_ASN -DNO_CERTS -DNO_BIG_INT"
else
    # turn off ASN if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_ASN -DNO_CERTS -DNO_BIG_INT"
        ENABLED_ASN=no
    fi
fi

if test "$ENABLED_RSA" = "yes" && test "$ENABLED_ASN" = "no"
then
    AC_MSG_ERROR([please disable rsa if disabling asn.])
fi

if test "$ENABLED_DSA" = "yes" && test "$ENABLED_ASN" = "no"
then
    AC_MSG_ERROR([please disable dsa if disabling asn.])
fi

if test "$ENABLED_DH" = "yes" && test "$ENABLED_ASN" = "no"
then
    AC_MSG_ERROR([please disable dh if disabling asn.])
fi

if test "$ENABLED_ECC" = "yes" && test "$ENABLED_ASN" = "no"
then
    AC_MSG_ERROR([please disable ecc if disabling asn.])
fi

if test "$ENABLED_PSK" = "no" && test "$ENABLED_ASN" = "no"
then
    AC_MSG_ERROR([please enable psk if disabling asn.])
fi

if test "$ENABLED_ASN" = "no"
then
    ENABLED_FASTMATH=no
    ENABLED_SLOWMATH=no
fi

AM_CONDITIONAL([BUILD_ASN], [test "x$ENABLED_ASN" = "xyes"])


# AES
AC_ARG_ENABLE([aes],
    [  --enable-aes            Enable AES (default: enabled)],
    [ ENABLED_AES=$enableval ],
    [ ENABLED_AES=yes ]
    )

if test "$ENABLED_AES" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_AES"
else
    # turn off AES if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_AES"
        ENABLED_AES=no
    fi
fi

AM_CONDITIONAL([BUILD_AES], [test "x$ENABLED_AES" = "xyes"])


# CODING
AC_ARG_ENABLE([coding],
    [  --enable-coding         Enable Coding base 16/64 (default: enabled)],
    [ ENABLED_CODING=$enableval ],
    [ ENABLED_CODING=yes ]
    )

if test "$ENABLED_CODING" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_CODING"
else
    # turn off CODING if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_CODING"
        ENABLED_CODING=no
    fi
fi

AM_CONDITIONAL([BUILD_CODING], [test "x$ENABLED_CODING" = "xyes"])


# DES3
AC_ARG_ENABLE([des3],
    [  --enable-des3           Enable DES3 (default: enabled)],
    [ ENABLED_DES3=$enableval ],
    [ ENABLED_DES3=yes ]
    )

if test "$ENABLED_DES3" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_DES3"
else
    # turn off DES3 if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_DES3"
        ENABLED_DES3=no
    fi
fi

AM_CONDITIONAL([BUILD_DES3], [test "x$ENABLED_DES3" = "xyes"])


# ARC4 
AC_ARG_ENABLE([arc4],
    [  --enable-arc4           Enable ARC4 (default: enabled)],
    [ ENABLED_ARC4=$enableval ],
    [ ENABLED_ARC4=yes ]
    )

if test "$ENABLED_ARC4" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_RC4"
else
    # turn off ARC4 if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_RC4"
        ENABLED_ARC4=no
    fi
fi

AM_CONDITIONAL([BUILD_RC4], [test "x$ENABLED_ARC4" = "xyes"])


# MD5 
AC_ARG_ENABLE([md5],
    [  --enable-md5            Enable MD5 (default: enabled)],
    [ ENABLED_MD5=$enableval ],
    [ ENABLED_MD5=yes ]
    )

if test "$ENABLED_MD5" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_MD5 -DNO_OLD_TLS"
else
    # turn off MD5 if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_MD5 -DNO_OLD_TLS"
        ENABLED_MD5=no
    fi
fi

AM_CONDITIONAL([BUILD_MD5], [test "x$ENABLED_MD5" = "xyes"])


# SHA 
AC_ARG_ENABLE([sha],
    [  --enable-sha            Enable SHA (default: enabled)],
    [ ENABLED_SHA=$enableval ],
    [ ENABLED_SHA=yes ]
    )

if test "$ENABLED_SHA" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_SHA -DNO_OLD_TLS"
else
    # turn off SHA if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_SHA -DNO_OLD_TLS"
        ENABLED_SHA=no
    fi
fi

AM_CONDITIONAL([BUILD_SHA], [test "x$ENABLED_SHA" = "xyes"])


# MD4 
AC_ARG_ENABLE([md4],
    [  --enable-md4            Enable MD4 (default: disabled)],
    [ ENABLED_MD4=$enableval ],
    [ ENABLED_MD4=no ]
    )

if test "$ENABLED_MD4" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_MD4"
fi

AM_CONDITIONAL([BUILD_MD4], [test "x$ENABLED_MD4" = "xyes"])


# PWDBASED
AC_ARG_ENABLE([pwdbased],
    [  --enable-pwdbased       Enable PWDBASED (default: disabled)],
    [ ENABLED_PWDBASED=$enableval ],
    [ ENABLED_PWDBASED=no ]
    )

if test "$ENABLED_PWDBASED" = "no"
then
    if test "$ENABLED_OPENSSLEXTRA" = "yes"
    then
        # opensslextra needs pwdbased 
        ENABLED_PWDBASED=yes
    else
        AM_CFLAGS="$AM_CFLAGS -DNO_PWDBASED"
    fi
fi

AM_CONDITIONAL([BUILD_PWDBASED], [test "x$ENABLED_PWDBASED" = "xyes"])


# HC128 
AC_ARG_ENABLE([hc128],
    [  --enable-hc128          Enable HC-128 (default: disabled)],
    [ ENABLED_HC128=$enableval ],
    [ ENABLED_HC128=no ]
    )

if test "$ENABLED_HC128" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_HC128"
else
    AM_CFLAGS="$AM_CFLAGS -DHAVE_HC128"
fi

AM_CONDITIONAL([BUILD_HC128], [test "x$ENABLED_HC128" = "xyes"])


# RABBIT
AC_ARG_ENABLE([rabbit],
    [  --enable-rabbit         Enable RABBIT (default: disabled)],
    [ ENABLED_RABBIT=$enableval ],
    [ ENABLED_RABBIT=no ]
    )

if test "$ENABLED_RABBIT" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_RABBIT"
else
    AM_CFLAGS="$AM_CFLAGS -DHAVE_RABBIT"
fi

AM_CONDITIONAL([BUILD_RABBIT], [test "x$ENABLED_RABBIT" = "xyes"])


# Web Server Build 
AC_ARG_ENABLE([webserver],
    [  --enable-webserver      Enable Web Server (default: disabled)],
    [ ENABLED_WEBSERVER=$enableval ],
    [ ENABLED_WEBSERVER=no ]
    )

if test "$ENABLED_WEBSERVER" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_WEBSERVER"
fi


# Filesystem Build 
AC_ARG_ENABLE([filesystem],
    [  --enable-filesystem     Enable Filesystem support (default: enabled)],
    [ ENABLED_FILESYSTEM=$enableval ],
    [ ENABLED_FILESYSTEM=yes ]
    )

if test "$ENABLED_FILESYSTEM" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_FILESYSTEM"
else
    # turn off filesystem if leanpsk on
    if test "$ENABLED_LEANPSK" = "yes"
    then
        AM_CFLAGS="$AM_CFLAGS -DNO_FILESYSTEM"
        ENABLED_FILESYSTEM=no
    fi
fi


# inline Build 
AC_ARG_ENABLE([inline],
    [  --enable-inline         Enable inline functions (default: enabled)],
    [ ENABLED_INLINE=$enableval ],
    [ ENABLED_INLINE=yes ]
    )

if test "$ENABLED_INLINE" = "no"
then
    AM_CFLAGS="$AM_CFLAGS -DNO_INLINE"
fi

AM_CONDITIONAL([BUILD_INLINE], [test "x$ENABLED_INLINE" = "xyes"])


# OCSP
AC_ARG_ENABLE([ocsp],
    [  --enable-ocsp           Enable OCSP (default: disabled)],
    [ ENABLED_OCSP=$enableval ],
    [ ENABLED_OCSP=no ],
    )

if test "$ENABLED_OCSP" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_OCSP"
fi

AM_CONDITIONAL([BUILD_OCSP], [test "x$ENABLED_OCSP" = "xyes"])


# CRL 
AC_ARG_ENABLE([crl],
    [  --enable-crl            Enable CRL (default: disabled)],
    [ ENABLED_CRL=$enableval ],
    [ ENABLED_CRL=no ],
    )

if test "$ENABLED_CRL" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_CRL"
fi

AM_CONDITIONAL([BUILD_CRL], [test "x$ENABLED_CRL" = "xyes"])


# CRL Monitor
AC_ARG_ENABLE([crl-monitor],
    [  --enable-crl-monitor    Enable CRL Monitor (default: disabled)],
    [ ENABLED_CRL_MONITOR=$enableval ],
    [ ENABLED_CRL_MONITOR=no ],
    )

if test "$ENABLED_CRL_MONITOR" = "yes"
then
    case $host_os in
    *linux* | *darwin* | *freebsd*)
        AM_CFLAGS="$AM_CFLAGS -DHAVE_CRL_MONITOR" ;;
    *)
        AC_MSG_ERROR([crl monitor only allowed on linux, OS X, or freebsd]) ;;
    esac
fi

AM_CONDITIONAL([BUILD_CRL_MONITOR], [test "x$ENABLED_CRL_MONITOR" = "xyes"])


# NTRU
ntruHome=`pwd`/NTRU_algorithm
ntruInclude=$ntruHome/cryptolib
ntruLib=$ntruHome
AC_ARG_ENABLE([ntru],
    [  --enable-ntru           Enable NTRU (default: disabled)],
    [ ENABLED_NTRU=$enableval ],
    [ ENABLED_NTRU=no ]
    )

if test "$ENABLED_NTRU" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_NTRU -I$ntruInclude"
    AM_LDFLAGS="$AM_LDFLAGS -L$ntruLib"
    LIBS="$LIBS -lntru_encrypt"
fi

AM_CONDITIONAL([BUILD_NTRU], [test "x$ENABLED_NTRU" = "xyes"])

if test "$ENABLED_NTRU" = "yes" && test "$ENABLED_SMALL" = "yes"
then
    AC_MSG_ERROR([cannot enable ntru and small, ntru requires TLS which small turns off.]) 
fi

# SNI
AC_ARG_ENABLE([sni],
    [  --enable-sni            Enable SNI (default: disabled)],
    [ ENABLED_SNI=$enableval ],
    [ ENABLED_SNI=no ]
    )

if test "x$ENABLED_SNI" = "xyes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_TLS_EXTENSIONS -DHAVE_SNI"
fi

# Maximum Fragment Length
AC_ARG_ENABLE([maxfragment],
    [  --enable-maxfragment    Enable Maximum Fragment Length (default: disabled)],
    [ ENABLED_MAX_FRAGMENT=$enableval ],
    [ ENABLED_MAX_FRAGMENT=no ]
    )

if test "x$ENABLED_MAX_FRAGMENT" = "xyes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_TLS_EXTENSIONS -DHAVE_MAX_FRAGMENT"
fi

# Truncated HMAC
AC_ARG_ENABLE([truncatedhmac],
    [  --enable-truncatedhmac  Enable Truncated HMAC (default: disabled)],
    [ ENABLED_TRUNCATED_HMAC=$enableval ],
    [ ENABLED_TRUNCATED_HMAC=no ]
    )

if test "x$ENABLED_TRUNCATED_HMAC" = "xyes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_TLS_EXTENSIONS -DHAVE_TRUNCATED_HMAC"
fi

# TLS Extensions
AC_ARG_ENABLE([tlsx],
    [  --enable-tlsx           Enable all TLS Extensions (default: disabled)],
    [ ENABLED_TLSX=$enableval ],
    [ ENABLED_TLSX=no ]
    )

if test "x$ENABLED_TLSX" = "xyes"
then
	ENABLED_SNI=yes
	ENABLED_MAX_FRAGMENT=yes
    AM_CFLAGS="$AM_CFLAGS -DHAVE_TLS_EXTENSIONS -DHAVE_SNI -DHAVE_MAX_FRAGMENT"
fi

#valgrind
AC_ARG_ENABLE([valgrind],
    [  --enable-valgrind       Enable valgrind for unit tests (default: disabled)],
    [ ENABLED_VALGRIND=$enableval ],
    [ ENABLED_VALGRIND=no ]
    )

if test "$ENABLED_VALGRIND" = "yes"
then
    AC_CHECK_PROG([HAVE_VALGRIND],[valgrind],[yes],[no])

    if test "$HAVE_VALGRIND" = "no"
    then
        AC_MSG_ERROR([Valgrind not found.])
    fi
    enable_shared=no
    enable_static=yes
    AM_CFLAGS="$AM_CFLAGS -DHAVE_VALGRIND"
fi

AM_CONDITIONAL([USE_VALGRIND], [test "x$ENABLED_VALGRIND" = "xyes"])


# Test certs, use internal cert functions for extra testing 
AC_ARG_ENABLE([testcert],
    [  --enable-testcert       Enable Test Cert (default: disabled)],
    [ ENABLED_TESTCERT=$enableval ],
    [ ENABLED_TESTCERT=no ]
    )

if test "$ENABLED_TESTCERT" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DCYASSL_TEST_CERT"
fi


# set fastmath default
FASTMATH_DEFAULT=no

if test "$target_cpu" = "x86_64"
then
FASTMATH_DEFAULT=yes
fi

# fastmath
AC_ARG_ENABLE([fastmath],
    [  --enable-fastmath       Enable fast math ops (default: enabled on x86_64)],
    [ ENABLED_FASTMATH=$enableval ],
    [ ENABLED_FASTMATH=$FASTMATH_DEFAULT]
    )

if test "x$ENABLED_FASTMATH" = "xyes"
then
    # turn off fastmth if leanpsk on or asn off
    if test "$ENABLED_LEANPSK" = "yes" || test "$ENABLED_ASN" = "no"
    then
        ENABLED_FASTMATH=no
    else
        AM_CFLAGS="$AM_CFLAGS -DUSE_FAST_MATH"
        ENABLED_SLOWMATH="no"
    fi
fi


# fast HUGE math
AC_ARG_ENABLE([fasthugemath],
    [  --enable-fasthugemath   Enable fast math + huge code (default: disabled)],
    [ ENABLED_FASTHUGEMATH=$enableval ],
    [ ENABLED_FASTHUGEMATH=no ]
    )

if test "$ENABLED_BUMP" = "yes"
then
    ENABLED_FASTHUGEMATH="yes"
fi

if test "$ENABLED_FASTHUGEMATH" = "yes"
then
    ENABLED_FASTMATH="yes"
    AM_CFLAGS="$AM_CFLAGS -DUSE_FAST_MATH"
    ENABLED_SLOWMATH="no"
fi

AM_CONDITIONAL([BUILD_FASTMATH], [test "x$ENABLED_FASTMATH" = "xyes"])
AM_CONDITIONAL([BUILD_SLOWMATH], [test "x$ENABLED_SLOWMATH" = "xyes"])


# Enable Examples, used to disable examples
AC_ARG_ENABLE([examples],
    [  --enable-examples       Enable Examples  (default: enabled)],
    [ ENABLED_EXAMPLES=$enableval ],
    [ ENABLED_EXAMPLES=yes ]
    )

AS_IF([test "x$ENABLED_SINGLETHREADED" = "xyes"], [ENABLED_EXAMPLES="no"])
AS_IF([test "x$ENABLED_FILESYSTEM" = "xno"], [ENABLED_EXAMPLES="no"])
AS_IF([test "x$ENABLED_INLINE" = "xno"], [ENABLED_EXAMPLES="no"])
# certs still have sha signatures for now 
AS_IF([test "x$ENABLED_SHA" = "xno"], [ENABLED_EXAMPLES="no"])
AM_CONDITIONAL([BUILD_EXAMPLES], [test "x$ENABLED_EXAMPLES" = "xyes"])


# LIBZ
ENABLED_LIBZ="no"
trylibzdir=""
AC_ARG_WITH([libz],
    [  --with-libz=PATH        PATH to libz install (default /usr/) ],
    [
        AC_MSG_CHECKING([for libz])
        CPPFLAGS="$CPPFLAGS -DHAVE_LIBZ"
        LIBS="$LIBS -lz"

        AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <zlib.h>]], [[ deflateInit(0, 8); ]])],[ libz_linked=yes ],[ libz_linked=no ])

        if test "x$libz_linked" == "xno" ; then
            if test "x$withval" != "xno" ; then
                trylibzdir=$withval
            fi
            if test "x$withval" == "xyes" ; then
                trylibzdir="/usr"
            fi

            AM_LDFLAGS="$AM_LDFLAGS -L$trylibzdir/lib"
            CPPFLAGS="$CPPFLAGS -I$trylibzdir/include"

            AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <zlib.h>]], [[ deflateInit(0, 8); ]])],[ libz_linked=yes ],[ libz_linked=no ])

            if test "x$libz_linked" == "xno" ; then
                AC_MSG_ERROR([libz isn't found.
                If it's already installed, specify its path using --with-libz=/dir/])
            fi
            AC_MSG_RESULT([yes])
        else
            AC_MSG_RESULT([yes])
        fi
        ENABLED_LIBZ="yes"
    ]
)
AM_CONDITIONAL([BUILD_LIBZ], [test "x$ENABLED_LIBZ" = "xyes"])


# cavium 
trycaviumdir=""
AC_ARG_WITH([cavium],
    [  --with-cavium=PATH      PATH to cavium/software dir ],
    [
        AC_MSG_CHECKING([for cavium])
        CPPFLAGS="$CPPFLAGS -DHAVE_CAVIUM"

            if test "x$withval" == "xyes" ; then
                AC_MSG_ERROR([need a PATH for --with-cavium])
            fi
            if test "x$withval" != "xno" ; then
                trycaviumdir=$withval
            fi

            LDFLAGS="$AM_LDFLAGS $trycaviumdir/api/cavium_common.o"
            CPPFLAGS="$CPPFLAGS -I$trycaviumdir/include"

            AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include "cavium_common.h"]], [[ CspShutdown(CAVIUM_DEV_ID); ]])],[ cavium_linked=yes ],[ cavium_linked=no ])

            if test "x$cavium_linked" == "xno" ; then
                AC_MSG_ERROR([cavium isn't found.
                If it's already installed, specify its path using --with-cavium=/dir/])
            fi
            AC_MSG_RESULT([yes])
            enable_shared=no
            enable_static=yes
    ]
)


# microchip api
AC_ARG_ENABLE([mcapi],
    [  --enable-mcapi          Enable Microchip API (default: disabled)],
    [ ENABLED_MCAPI=$enableval ],
    [ ENABLED_MCAPI=no ]
    )

if test "$ENABLED_MCAPI" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -DHAVE_MCAPI -DCYASSL_AES_COUNTER -DCYASSL_AES_DIRECT"
fi

if test "$ENABLED_MCAPI" = "yes" && test "$ENABLED_SHA512" = "no"
then
    AC_MSG_ERROR([please enable sha512 if enabling mcapi.])
fi

if test "$ENABLED_MCAPI" = "yes" && test "$ENABLED_ECC" = "no"
then
    AC_MSG_ERROR([please enable ecc if enabling mcapi.])
fi

if test "$ENABLED_MCAPI" = "yes" && test "$ENABLED_LIBZ" = "no"
then
    AC_MSG_ERROR([please use --with-libz if enabling mcapi.])
fi

AM_CONDITIONAL([BUILD_MCAPI], [test "x$ENABLED_MCAPI" = "xyes"])



# OPTIMIZE FLAGS
if test "$GCC" = "yes"
then
    AM_CFLAGS="$AM_CFLAGS -Wall -Wno-unused"
    if test "$ax_enable_debug" = "no"
    then
        if test "$ENABLED_FASTMATH" = "yes"
        then
            AM_CFLAGS="$AM_CFLAGS $OPTIMIZE_FAST_CFLAGS"
            if test "$ENABLED_FASTHUGEMATH" = "yes"
            then
                AM_CFLAGS="$AM_CFLAGS $OPTIMIZE_HUGE_CFLAGS"
            fi
        else
            AM_CFLAGS="$AM_CFLAGS $OPTIMIZE_CFLAGS"
        fi
    fi
fi

LIB_SOCKET_NSL

AC_ARG_ENABLE([gcc-hardening],
AS_HELP_STRING(--enable-gcc-hardening, Enable compiler security checks (default: disabled)),
[if test x$enableval = xyes; then
    AM_CFLAGS="$AM_CFLAGS -D_FORTIFY_SOURCE=2 -fstack-protector-all"
    AM_CFLAGS="$AM_CFLAGS -fwrapv -fPIE -Wstack-protector"
    AM_CFLAGS="$AM_CFLAGS --param ssp-buffer-size=1"
    LDFLAGS="$LDFLAGS -pie"
fi])

AX_HARDEN_CC_COMPILER_FLAGS

# link to ws2_32 if on mingw
case $host_os in
    *mingw32)
        LDFLAGS="$LDFLAGS -lws2_32" ;;
esac

# add user C_EXTRA_FLAGS back
CFLAGS="$CFLAGS $USER_C_EXTRA_FLAGS"
OPTION_FLAGS="$USER_C_EXTRA_FLAGS $AM_CFLAGS"

CREATE_HEX_VERSION
AC_SUBST([AM_CPPFLAGS])
AC_SUBST([AM_CFLAGS])
AC_SUBST([AM_LDFLAGS])

# FINAL
AC_CONFIG_FILES([stamp-h], [echo timestamp > stamp-h])
AC_CONFIG_FILES([Makefile])
AC_CONFIG_FILES([cyassl/version.h])
AC_CONFIG_FILES([cyassl/options.h])
AC_CONFIG_FILES([support/cyassl.pc])
AC_CONFIG_FILES([rpm/spec])

AX_CREATE_GENERIC_CONFIG
AX_AM_JOBSERVER([yes])

AC_OUTPUT


# force make clean
echo "---"
echo "Running make clean..."
make clean >/dev/null 2>&1
echo

# generate user options header 
echo "---"
echo "Generating user options header..."
OPTION_FILE="cyassl/options.h"
rm -f $OPTION_FILE

echo "/* cyassl options.h" >> $OPTION_FILE 
echo " * generated from configure options" >> $OPTION_FILE
echo " *" >> $OPTION_FILE
echo " * Copyright (C) 2006-2013 wolfSSL Inc." >> $OPTION_FILE
echo " *" >> $OPTION_FILE
echo " * This file is part of CyaSSL." >> $OPTION_FILE
echo " *" >> $OPTION_FILE
echo " */" >> $OPTION_FILE

echo "" >> $OPTION_FILE 
echo "#pragma once" >> $OPTION_FILE 
echo "" >> $OPTION_FILE 
echo "#ifdef __cplusplus" >> $OPTION_FILE 
echo "extern \"C\" {" >> $OPTION_FILE 
echo "#endif" >> $OPTION_FILE 
echo "" >> $OPTION_FILE 

for option in $OPTION_FLAGS; do
    defonly=`echo $option | sed 's/-D//'`
    if test "$defonly" != "$option"
    then
        noequalsign=`echo $defonly | sed 's/=/ /'`
        echo "#undef  $noequalsign" >> $OPTION_FILE 
        echo "#define $noequalsign" >> $OPTION_FILE 
        echo "" >> $OPTION_FILE 
    else
        echo "option w/o begin -D is $option, not saving to $OPTION_FILE"
    fi
done

echo "" >> $OPTION_FILE 
echo "#ifdef __cplusplus" >> $OPTION_FILE 
echo "}" >> $OPTION_FILE 
echo "#endif" >> $OPTION_FILE 
echo "" >> $OPTION_FILE 
echo

# output config summary
echo "---"
echo "Configuration summary for $PACKAGE_NAME version $VERSION"
echo ""
echo "   * Installation prefix:       $prefix"
echo "   * System type:               $host_vendor-$host_os"
echo "   * Host CPU:                  $host_cpu"
echo "   * C Compiler:                $CC_VERSION"
echo "   * C Flags:                   $CFLAGS"
echo "   * C++ Compiler:              $CXX_VERSION"
echo "   * C++ Flags:                 $CXXFLAGS"
echo "   * CPP Flags:                 $CPPFLAGS"
echo "   * LIB Flags:                 $LIB"
echo "   * Debug enabled:             $ax_enable_debug"
echo "   * Warnings as failure:       $ac_cv_warnings_as_errors"
echo "   * make -j:                   $enable_jobserver"
echo "   * VCS checkout:              $ac_cv_vcs_checkout"
echo 
echo "   Features "
echo "   * Single threaded:           $ENABLED_SINGLETHREADED"
echo "   * Filesystem:                $ENABLED_FILESYSTEM"
echo "   * OpenSSL Extra API:         $ENABLED_OPENSSLEXTRA"
echo "   * fastmath:                  $ENABLED_FASTMATH"
echo "   * sniffer:                   $ENABLED_SNIFFER"
echo "   * ARC4:                      $ENABLED_ARC4"
echo "   * AES:                       $ENABLED_AES"
echo "   * AES-NI:                    $ENABLED_AESNI"
echo "   * AES-GCM:                   $ENABLED_AESGCM"
echo "   * AES-CCM:                   $ENABLED_AESCCM"
echo "   * DES3:                      $ENABLED_DES3"
echo "   * Camellia:                  $ENABLED_CAMELLIA"
echo "   * NULL Cipher:               $ENABLED_NULL_CIPHER"
echo "   * MD5:                       $ENABLED_MD5"
echo "   * RIPEMD:                    $ENABLED_RIPEMD"
echo "   * SHA:                       $ENABLED_SHA"
echo "   * SHA-512:                   $ENABLED_SHA512"
echo "   * BLAKE2:                    $ENABLED_BLAKE2"
echo "   * keygen:                    $ENABLED_KEYGEN"
echo "   * certgen:                   $ENABLED_CERTGEN"
echo "   * HC-128:                    $ENABLED_HC128"
echo "   * RABBIT:                    $ENABLED_RABBIT"
echo "   * PWDBASED:                  $ENABLED_PWDBASED"
echo "   * MD4:                       $ENABLED_MD4"
echo "   * PSK:                       $ENABLED_PSK"
echo "   * LEANPSK:                   $ENABLED_LEANPSK"
echo "   * RSA:                       $ENABLED_RSA"
echo "   * DSA:                       $ENABLED_DSA"
echo "   * DH:                        $ENABLED_DH"
echo "   * ECC:                       $ENABLED_ECC"
echo "   * FPECC:                     $ENABLED_FPECC"
echo "   * ASN:                       $ENABLED_ASN"
echo "   * CODING:                    $ENABLED_CODING"
echo "   * MEMORY:                    $ENABLED_MEMORY"
echo "   * ERROR_STRINGS:             $ENABLED_ERROR_STRINGS"
echo "   * DTLS:                      $ENABLED_DTLS"
echo "   * Old TLS Versions:          $ENABLED_OLD_TLS"
echo "   * OCSP:                      $ENABLED_OCSP"
echo "   * CRL:                       $ENABLED_CRL"
echo "   * CRL-MONITOR:               $ENABLED_CRL_MONITOR"
echo "   * Persistent session cache:  $ENABLED_SAVESESSION"
echo "   * Persistent cert    cache:  $ENABLED_SAVECERT"
echo "   * Atomic User Record Layer:  $ENABLED_ATOMICUSER"
echo "   * Public Key Callbacks:      $ENABLED_PKCALLBACKS"
echo "   * NTRU:                      $ENABLED_NTRU"
echo "   * SNI:                       $ENABLED_SNI"
echo "   * Maximum Fragment Length:   $ENABLED_MAX_FRAGMENT"
echo "   * Truncated HMAC:            $ENABLED_TRUNCATED_HMAC"
echo "   * All TLS Extensions:        $ENABLED_TLSX"
echo "   * valgrind unit tests:       $ENABLED_VALGRIND"
echo "   * LIBZ:                      $ENABLED_LIBZ"
echo "   * Examples:                  $ENABLED_EXAMPLES"
echo ""
echo "---"