/* wifi_connect.c
 *
 * Copyright (C) 2006-2024 wolfSSL Inc.
 *
 * This file is part of wolfSSL.
 *
 * wolfSSL is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * wolfSSL is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
 */
#include "wifi_connect.h"

/* FreeRTOS */
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/event_groups.h>

/* Espressif */
#include <esp_log.h>
#include <esp_idf_version.h>
#include <esp_wifi.h>

/* wolfSSL */
/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
#ifdef WOLFSSL_USER_SETTINGS
    #include <wolfssl/wolfcrypt/settings.h>
    #ifndef WOLFSSL_ESPIDF
        #warning "Problem with wolfSSL user_settings."
        #warning "Check components/wolfssl/include"
    #endif
    /* This project not yet using the library */
    #undef USE_WOLFSSL_ESP_SDK_WIFI
    #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
#else
    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
#endif

/* When there's too little heap, WiFi quietly refuses to connect */
#define WIFI_LOW_HEAP_WARNING 21132

#if defined(CONFIG_IDF_TARGET_ESP8266)
#elif ESP_IDF_VERSION_MAJOR >= 5
    /* example path set in cmake file */
#elif ESP_IDF_VERSION_MAJOR >= 4
    #include "protocol_examples_common.h"
#else
    const static int CONNECTED_BIT = BIT0;
    static EventGroupHandle_t wifi_event_group;
#endif

#if defined(CONFIG_IDF_TARGET_ESP8266)

#elif defined(ESP_IDF_VERSION_MAJOR) && defined(ESP_IDF_VERSION_MINOR)
    #if ESP_IDF_VERSION_MAJOR >= 4
        /* likely using examples, see wifi_connect.h */
    #else
        /* TODO - still supporting pre V4 ? */
        const static int CONNECTED_BIT = BIT0;
        static EventGroupHandle_t wifi_event_group;
    #endif
    #if (ESP_IDF_VERSION_MAJOR == 5)
        #define HAS_WPA3_FEATURES
    #else
        #undef HAS_WPA3_FEATURES
    #endif
#else
    /* TODO Consider pre IDF v5? */
#endif

/* breadcrumb prefix for logging */
const static char *TAG = "wifi_connect";

#if defined(CONFIG_IDF_TARGET_ESP8266)
#ifndef CONFIG_ESP_MAX_STA_CONN
    #define CONFIG_ESP_MAX_STA_CONN 4
#endif
#define EXAMPLE_MAX_STA_CONN       CONFIG_ESP_MAX_STA_CONN

#define WIFI_CONNECTED_BIT BIT0
#define WIFI_FAIL_BIT      BIT1
#ifndef CONFIG_ESP_MAXIMUM_RETRY
    #define CONFIG_ESP_MAXIMUM_RETRY 5
#endif
/* FreeRTOS event group to signal when we are connected*/
static EventGroupHandle_t s_wifi_event_group;
static int s_retry_num = 0;

#define EXAMPLE_ESP_MAXIMUM_RETRY  CONFIG_ESP_MAXIMUM_RETRY
static void event_handler(void* arg, esp_event_base_t event_base,
                                int32_t event_id, void* event_data)
{
    if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
        esp_wifi_connect();
    } else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) {
        if (s_retry_num < EXAMPLE_ESP_MAXIMUM_RETRY) {
            esp_wifi_connect();
            s_retry_num++;
            ESP_LOGI(TAG, "retry to connect to the AP");
        } else {
            xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
        }
        ESP_LOGI(TAG,"connect to the AP fail");
    } else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
        ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
        ESP_LOGI(TAG, "got ip:%s",
                 ip4addr_ntoa(&event->ip_info.ip));
        s_retry_num = 0;
        xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
    }
}

int wifi_init_sta(void)
{
    word32 this_heap;

    s_wifi_event_group = xEventGroupCreate();

    tcpip_adapter_init();

    ESP_ERROR_CHECK(esp_event_loop_create_default());

    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK(esp_wifi_init(&cfg));

    ESP_ERROR_CHECK(esp_event_handler_register(WIFI_EVENT, ESP_EVENT_ANY_ID, &event_handler, NULL));
    ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &event_handler, NULL));

    wifi_config_t wifi_config = {
        .sta = {
            .ssid = EXAMPLE_ESP_WIFI_SSID,
            .password = EXAMPLE_ESP_WIFI_PASS
        },
    };

    /* Setting a password implies station will connect to all security modes including WEP/WPA.
        * However these modes are deprecated and not advisable to be used. In case your Access point
        * doesn't support WPA2, these mode can be enabled by commenting below line */

    if (strlen((char *)wifi_config.sta.password)) {
        wifi_config.sta.threshold.authmode = WIFI_AUTH_WPA2_PSK;
    }

    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
    ESP_ERROR_CHECK(esp_wifi_start() );

    ESP_LOGI(TAG, "wifi_init_sta finished. Connecting...");
    this_heap = esp_get_free_heap_size();
    ESP_LOGI(TAG, "this heap = %d", this_heap);
    if (this_heap < WIFI_LOW_HEAP_WARNING) {
        ESP_LOGW(TAG, "Warning: WiFi low heap: %d", WIFI_LOW_HEAP_WARNING);
    }
    /* Waiting until either the connection is established (WIFI_CONNECTED_BIT) or connection failed for the maximum
     * number of re-tries (WIFI_FAIL_BIT). The bits are set by event_handler() (see above) */
    EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group,
            WIFI_CONNECTED_BIT | WIFI_FAIL_BIT,
            pdFALSE,
            pdFALSE,
            portMAX_DELAY);

    ESP_LOGI(TAG, "xEventGroupWaitBits finished.");
    /* xEventGroupWaitBits() returns the bits before the call returned, hence we can test which event actually
     * happened. */
    if (bits & WIFI_CONNECTED_BIT) {
        ESP_LOGI(TAG, "connected to ap SSID:%s",
                 EXAMPLE_ESP_WIFI_SSID);
    } else if (bits & WIFI_FAIL_BIT) {
        ESP_LOGI(TAG, "Failed to connect to SSID:%s, password:%s",
                 EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
    } else {
        ESP_LOGE(TAG, "UNEXPECTED EVENT");
    }

    ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_STA_GOT_IP, &event_handler));
    ESP_ERROR_CHECK(esp_event_handler_unregister(WIFI_EVENT, ESP_EVENT_ANY_ID, &event_handler));
    vEventGroupDelete(s_wifi_event_group);
    return ESP_OK;
}

#elif ESP_IDF_VERSION_MAJOR < 4
/* event handler for wifi events */
static esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
{
    switch (event->event_id)
    {
    case SYSTEM_EVENT_STA_START:
        esp_wifi_connect();
        break;
    case SYSTEM_EVENT_STA_GOT_IP:
    #if ESP_IDF_VERSION_MAJOR >= 4
        ESP_LOGI(TAG, "got ip:" IPSTR "\n",
                 IP2STR(&event->event_info.got_ip.ip_info.ip));
    #else
        ESP_LOGI(TAG, "got ip:%s",
                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
    #endif
        /* see Espressif api-reference/system/freertos_idf */
        xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
        break;
    case SYSTEM_EVENT_STA_DISCONNECTED:
        esp_wifi_connect();
        xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
        break;
    default:
        break;
    }
    return ESP_OK;
}
#else

#ifdef CONFIG_ESP_MAXIMUM_RETRY
    #define EXAMPLE_ESP_MAXIMUM_RETRY  CONFIG_ESP_MAXIMUM_RETRY
#else
    #define CONFIG_ESP_MAXIMUM_RETRY 5
#endif

#if CONFIG_ESP_WIFI_AUTH_OPEN
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_OPEN
#elif CONFIG_ESP_WIFI_AUTH_WEP
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WEP
#elif CONFIG_ESP_WIFI_AUTH_WPA_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_PSK
#elif CONFIG_ESP_WIFI_AUTH_WPA2_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_PSK
#elif CONFIG_ESP_WIFI_AUTH_WPA_WPA2_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_WPA2_PSK
#elif CONFIG_ESP_WIFI_AUTH_WPA3_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA3_PSK
#elif CONFIG_ESP_WIFI_AUTH_WPA2_WPA3_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_WPA3_PSK
#elif CONFIG_ESP_WIFI_AUTH_WAPI_PSK
#define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WAPI_PSK
#endif

#ifndef ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD
    #define CONFIG_ESP_WIFI_AUTH_WPA2_PSK 1
    #define ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD CONFIG_ESP_WIFI_AUTH_WPA2_PSK
#endif

/* FreeRTOS event group to signal when we are connected*/
static EventGroupHandle_t s_wifi_event_group;

/* The event group allows multiple bits for each event, but we only care about two events:
 * - we are connected to the AP with an IP
 * - we failed to connect after the maximum amount of retries */
#define WIFI_CONNECTED_BIT BIT0
#define WIFI_FAIL_BIT      BIT1


static int s_retry_num = 0;
ip_event_got_ip_t* event;


static void event_handler(void* arg,
                          esp_event_base_t event_base,
                          int32_t event_id,
                          void* event_data)
{
    if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
        esp_wifi_connect();
    }
    else if (event_base == WIFI_EVENT &&
             event_id == WIFI_EVENT_STA_DISCONNECTED) {
        if (s_retry_num < EXAMPLE_ESP_MAXIMUM_RETRY) {
            esp_wifi_connect();
            s_retry_num++;
            ESP_LOGI(TAG, "retry to connect to the AP");
        }
        else {
            xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
        }
        ESP_LOGI(TAG, "connect to the AP fail");
    }
    else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
        event = (ip_event_got_ip_t*) event_data;
        wifi_show_ip();
        s_retry_num = 0;
        xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
    }
}

int wifi_init_sta(void)
{
    int ret = ESP_OK;

    s_wifi_event_group = xEventGroupCreate();

    ESP_ERROR_CHECK(esp_netif_init());

    ESP_ERROR_CHECK(esp_event_loop_create_default());
    esp_netif_create_default_wifi_sta();

    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK(esp_wifi_init(&cfg));

    esp_event_handler_instance_t instance_any_id;
    esp_event_handler_instance_t instance_got_ip;
    ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT,
                                                        ESP_EVENT_ANY_ID,
                                                        &event_handler,
                                                        NULL,
                                                        &instance_any_id));
    ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT,
                                                        IP_EVENT_STA_GOT_IP,
                                                        &event_handler,
                                                        NULL,
                                                        &instance_got_ip));

    wifi_config_t wifi_config = {
        .sta = {
            .ssid = EXAMPLE_ESP_WIFI_SSID,
            .password = EXAMPLE_ESP_WIFI_PASS,
            /* Authmode threshold resets to WPA2 as default if password matches
             * WPA2 standards (password len => 8). If you want to connect the
             * device to deprecated WEP/WPA networks, Please set the threshold
             * value WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK and set the password with
             * length and format matching to WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK
             * standards. */
            .threshold.authmode = ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD,
        #ifdef HAS_WPA3_FEATURES
            .sae_pwe_h2e = WPA3_SAE_PWE_BOTH,
        #endif
        },
    };
    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
    ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config) );

#ifdef CONFIG_EXAMPLE_WIFI_SSID
    if (XSTRCMP(CONFIG_EXAMPLE_WIFI_SSID, "myssid") == 0) {
        ESP_LOGW(TAG, "WARNING: CONFIG_EXAMPLE_WIFI_SSID is \"myssid\".");
        ESP_LOGW(TAG, "  Do you have a WiFi AP called \"myssid\", ");
        ESP_LOGW(TAG, "  or did you forget the ESP-IDF configuration?");
    }
#else
    ESP_LOGW(TAG, "WARNING: CONFIG_EXAMPLE_WIFI_SSID not defined.");
#endif

    ESP_ERROR_CHECK(esp_wifi_start() );

    ESP_LOGI(TAG, "wifi_init_sta finished.");

    /* Waiting until either the connection is established (WIFI_CONNECTED_BIT)
     * or connection failed for the maximum number of re-tries (WIFI_FAIL_BIT).
     * The bits are set by event_handler() (see above) */
    EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group,
            WIFI_CONNECTED_BIT | WIFI_FAIL_BIT,
            pdFALSE,
            pdFALSE,
            portMAX_DELAY);

    /* xEventGroupWaitBits() returns the bits before the call returned,
     * hence we can test which event actually happened. */
#if defined(SHOW_SSID_AND_PASSWORD)
    ESP_LOGW(TAG, "Undefine SHOW_SSID_AND_PASSWORD to not show SSID/password");
    if (bits & WIFI_CONNECTED_BIT) {
        ESP_LOGI(TAG, "connected to ap SSID:%s password:%s",
                       EXAMPLE_ESP_WIFI_SSID,
                       EXAMPLE_ESP_WIFI_PASS);
    }
    else if (bits & WIFI_FAIL_BIT) {
        ESP_LOGI(TAG, "Failed to connect to SSID:%s, password:%s",
                       EXAMPLE_ESP_WIFI_SSID,
                       EXAMPLE_ESP_WIFI_PASS);
    }
    else {
        ESP_LOGE(TAG, "UNEXPECTED EVENT");
    }
#else
    if (bits & WIFI_CONNECTED_BIT) {
        ESP_LOGI(TAG, "Connected to AP");
    }
    else if (bits & WIFI_FAIL_BIT) {
        ESP_LOGI(TAG, "Failed to connect to AP");
        ret = -1;
    }
    else {
        ESP_LOGE(TAG, "AP UNEXPECTED EVENT");
        ret = -2;
    }
#endif
    return ret;
}

int wifi_show_ip(void)
{
    /* TODO Causes panic: ESP_LOGI(TAG, "got ip:" IPSTR,
     * IP2STR(&event->ip_info.ip)); */
    return ESP_OK;
}
#endif