/*!
    \ingroup RSA

    \brief This function initializes a provided RsaKey struct. It also takes
    in a heap identifier, for use with user defined memory overrides
    (see XMALLOC, XFREE, XREALLOC).

    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING
    is enabled.

    \return 0 Returned upon successfully initializing the RSA structure for
    use with encryption and decryption
    \return BAD_FUNC_ARGS Returned if the RSA key pointer evaluates to NULL

    \param key pointer to the RsaKey structure to initialize
    \param heap pointer to a heap identifier, for use with memory overrides,
    allowing custom handling of memory allocation. This heap will be the
    default used when allocating memory for use with this RSA object

    _Example_
    \code
    RsaKey enc;
    int ret;
    ret = wc_InitRsaKey(&enc, NULL); // not using heap hint. No custom memory
    if ( ret != 0 ) {
    	// error initializing RSA key
    }
    \endcode

    \sa wc_RsaInitCavium
    \sa wc_FreeRsaKey
    \sa wc_RsaSetRNG
*/
int  wc_InitRsaKey(RsaKey* key, void* heap);

/*!
    \ingroup RSA

    \brief This function initializes a provided RsaKey struct. The id and
    len are used to identify the key on the device while the devId identifies
    the device.  It also takes in a heap identifier, for use with user defined
    memory overrides (see XMALLOC, XFREE, XREALLOC).

    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING
    is enabled.

    \return 0 Returned upon successfully initializing the RSA structure for
    use with encryption and decryption
    \return BAD_FUNC_ARGS Returned if the RSA key pointer evaluates to NULL
    \return BUFFER_E Returned if len is less than 0 or greater than
    RSA_MAX_ID_LEN.

    \param key pointer to the RsaKey structure to initialize
    \param id identifier of key on device
    \param len length of identifier in bytes
    \param heap pointer to a heap identifier, for use with memory overrides,
    allowing custom handling of memory allocation. This heap will be the
    default used when allocating memory for use with this RSA object
    \param devId ID to use with hardware device

    _Example_
    \code
    RsaKey enc;
    unsigned char* id = (unsigned char*)"RSA2048";
    int len = 6;
    int devId = 1;
    int ret;
    ret = wc_CryptoDev_RegisterDevice(devId, wc_Pkcs11_CryptoDevCb,
                                      &token);
    if ( ret != 0) {
        // error associating callback and token with device id
    }
    ret = wc_InitRsaKey_Id(&enc, id, len, NULL, devId); // not using heap hint
    if ( ret != 0 ) {
        // error initializing RSA key
    }
    \endcode

    \sa wc_InitRsaKey
    \sa wc_RsaInitCavium
    \sa wc_FreeRsaKey
    \sa wc_RsaSetRNG
*/
int  wc_InitRsaKey_Id(RsaKey* key, unsigned char* id, int len,
        void* heap, int devId);

/*!
    \ingroup RSA

    \brief This function associates RNG with Key. It is needed when WC_RSA_BLINDING
    is enabled.

    \return 0 Returned upon success
    \return BAD_FUNC_ARGS Returned if the RSA key, rng pointer evaluates to NULL

    \param key pointer to the RsaKey structure to be associated
    \param rng pointer to the WC_RNG structure to associate with

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    \endcode

    \sa wc_InitRsaKey
    \sa wc_RsaSetRNG
*/
int wc_RsaSetRNG(RsaKey* key, WC_RNG* rng);

/*!
    \ingroup RSA

    \brief This function frees a provided RsaKey struct using mp_clear.

    \return 0 Returned upon successfully freeing the key

    \param key pointer to the RsaKey structure to free

    _Example_
    \code
    RsaKey enc;
    wc_InitRsaKey(&enc, NULL); // not using heap hint. No custom memory
    ... set key, do encryption

    wc_FreeRsaKey(&enc);
    \endcode

    \sa wc_InitRsaKey
*/
int  wc_FreeRsaKey(RsaKey* key);

/*!
    \ingroup RSA

    \brief This function encrypts a message from in and stores the result
    in out. It requires an initialized public key and a random number
    generator. As a side effect, this function will return the bytes written
    to out in outLen.

    \return Success Upon successfully encrypting the input message, returns
    0 for success and less than zero for failure. Also returns the number
    bytes written to out by storing the value in outLen
    \return BAD_FUNC_ARG Returned if any of the input parameters are invalid
    \return RSA_BUFFER_E Returned if the output buffer is too small to store
    the ciphertext
    \return RNG_FAILURE_E Returned if there is an error generating a random
    block using the provided RNG structure
    \return MP_INIT_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_READ_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_CMP_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_INVMOD_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_EXPTMOD_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_MOD_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_MUL_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_ADD_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_MULMOD_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_TO_E May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_MEM May be returned if there is an error in the math
    library used while encrypting the message
    \return MP_ZERO_E May be returned if there is an error in the math
    library used while encrypting the message

    \param in pointer to a buffer containing the input message to encrypt
    \param inLen the length of the message to encrypt
    \param out pointer to the buffer in which to store the output ciphertext
    \param outLen the length of the output buffer
    \param key pointer to the RsaKey structure containing the public
    key to use for encryption
    \param rng The RNG structure with which to generate random block padding

    _Example_
    \code
    RsaKey pub;
    int ret = 0;
    byte n[] = { // initialize with received n component of public key };
    byte e[] = { // initialize with received e component of public key };
    byte msg[] = { // initialize with plaintext of message to encrypt };
    byte cipher[256]; // 256 bytes is large enough to store 2048 bit RSA
    ciphertext

    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
    wc_RsaPublicKeyDecodeRaw(n, sizeof(n), e, sizeof(e), &pub);
    // initialize with received public key parameters
    ret = wc_RsaPublicEncrypt(msg, sizeof(msg), out, sizeof(out), &pub, &rng);
    if ( ret != 0 ) {
    	// error encrypting message
    }
    \endcode

    \sa wc_RsaPrivateDecrypt
*/
int  wc_RsaPublicEncrypt(const byte* in, word32 inLen, byte* out,
                                 word32 outLen, RsaKey* key, WC_RNG* rng);

/*!
    \ingroup RSA

    \brief This functions is utilized by the wc_RsaPrivateDecrypt function
    for decrypting.

    \return Success Length of decrypted data.
    \return RSA_PAD_E RsaUnPad error, bad formatting

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param key The key to use for decryption.

    _Example_
    \code
    none
    \endcode

    \sa wc_RsaPrivateDecrypt
*/
int  wc_RsaPrivateDecryptInline(byte* in, word32 inLen, byte** out,
                                        RsaKey* key);

/*!
    \ingroup RSA

    \brief This functions provides private RSA decryption.

    \return Success length of decrypted data.
    \return MEMORY_E -125, out of memory error
    \return BAD_FUNC_ARG -173, Bad function argument provided

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param outLen The length of out.
    \param key The key to use for decryption.

    _Example_
    \code
    ret = wc_RsaPublicEncrypt(in, inLen, out, sizeof(out), &key, &rng);
    if (ret < 0) {
        return -1;
    }
    ret = wc_RsaPrivateDecrypt(out, ret, plain, sizeof(plain), &key);
    if (ret < 0) {
        return -1;
    }
    \endcode

    \sa RsaUnPad
    \sa wc_RsaFunction
    \sa wc_RsaPrivateDecryptInline
*/
int  wc_RsaPrivateDecrypt(const byte* in, word32 inLen, byte* out,
                                  word32 outLen, RsaKey* key);

/*!
    \ingroup RSA

    \brief Signs the provided array with the private key.

    \return RSA_BUFFER_E: -131, RSA buffer error, output too small or
    input too large

    \param in The byte array to be encrypted.
    \param inLen The length of in.
    \param out The byte array for the encrypted data to be stored.
    \param outLen The length of out.
    \param key The key to use for encryption.
    \param RNG The RNG struct to use for random number purposes.

    _Example_
    \code
    ret = wc_RsaSSL_Sign(in, inLen, out, sizeof(out), &key, &rng);
    if (ret < 0) {
        return -1;
    }
    memset(plain, 0, sizeof(plain));
    ret = wc_RsaSSL_Verify(out, ret, plain, sizeof(plain), &key);
    if (ret < 0) {
        return -1;
    }
    \endcode

    \sa wc_RsaPad
*/
int  wc_RsaSSL_Sign(const byte* in, word32 inLen, byte* out,
                            word32 outLen, RsaKey* key, WC_RNG* rng);

/*!
    \ingroup RSA

    \brief Used to verify that the message was signed by RSA key.  The output
    uses the same byte array as the input.

    \return >0 Length of text.
    \return <0 An error occurred.

    \param in Byte array to be decrypted.
    \param inLen Length of the buffer input.
    \param out Pointer to a pointer for decrypted information.
    \param key RsaKey to use.

    _Example_
    \code
    RsaKey key;
    WC_WC_RNG rng;
    int ret = 0;
    long e = 65537; // standard value to use for exponent
    wc_InitRsaKey(&key, NULL); // not using heap hint. No custom memory
    wc_InitRng(&rng);
    wc_MakeRsaKey(&key, 2048, e, &rng);

    byte in[] = { // Initialize with some RSA encrypted information }
    byte* out;
    if(wc_RsaSSL_VerifyInline(in, sizeof(in), &out, &key) < 0)
    {
        // handle error
    }
    \endcode

    \sa wc_RsaSSL_Verify
    \sa wc_RsaSSL_Sign
*/
int  wc_RsaSSL_VerifyInline(byte* in, word32 inLen, byte** out,
                                    RsaKey* key);

/*!
    \ingroup RSA

    \brief Used to verify that the message was signed by key.

    \return Success Length of text on no error.
    \return MEMORY_E memory exception.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param outLen The length of out.
    \param key The key to use for verification.

    _Example_
    \code
    ret = wc_RsaSSL_Sign(in, inLen, out, sizeof(out), &key, &rng);
    if (ret < 0) {
        return -1;
    }
    memset(plain, 0, sizeof(plain));
    ret = wc_RsaSSL_Verify(out, ret, plain, sizeof(plain), &key);
    if (ret < 0) {
        return -1;
    }
    \endcode

    \sa wc_RsaSSL_Sign
*/
int  wc_RsaSSL_Verify(const byte* in, word32 inLen, byte* out,
                              word32 outLen, RsaKey* key);

/*!
    \ingroup RSA

    \brief Signs the provided array with the private key.

    \return RSA_BUFFER_E: -131, RSA buffer error, output too small or
    input too large

    \param in The byte array to be encrypted.
    \param inLen The length of in.
    \param out The byte array for the encrypted data to be stored.
    \param outLen The length of out.
    \param hash The hash type to be in message
    \param mgf Mask Generation Function Identifiers
    \param key The key to use for verification.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;

    ret = wc_RsaPSS_Sign((byte*)szMessage, (word32)XSTRLEN(szMessage)+1,
            pSignature, sizeof(pSignature),
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
    if (ret > 0 ){
        sz = ret;
    } else return -1;

    ret = wc_RsaPSS_Verify(pSignature, sz, pt, outLen,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
    if (ret <= 0)return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Verify
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_Sign(const byte* in, word32 inLen, byte* out,
                                word32 outLen, enum wc_HashType hash, int mgf,
                                RsaKey* key, WC_RNG* rng);

/*!
    \ingroup RSA

    \brief Decrypt input signature to verify that the message was signed by key.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return Success Length of text on no error.
    \return MEMORY_E memory exception.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param outLen The length of out.
    \param hash The hash type to be in message
    \param mgf Mask Generation Function Identifiers
    \param key The key to use for verification.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;
    ret = wc_RsaPSS_Sign((byte*)szMessage, (word32)XSTRLEN(szMessage)+1,
            pSignature, sizeof(pSignature),
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
    if (ret > 0 ){
        sz = ret;
    } else return -1;

    ret = wc_RsaPSS_Verify(pSignature, sz, pt, outLen,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
    if (ret <= 0)return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_VerifyInline
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_Verify(byte* in, word32 inLen, byte* out,
                                  word32 outLen, enum wc_HashType hash, int mgf,
                                  RsaKey* key);

/*!
    \ingroup RSA

    \brief Decrypt input signature to verify that the message was signed by RSA
    key.
    The output uses the same byte array as the input.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING
    is enabled.

    \return >0 Length of text.
    \return <0 An error occurred.

    \param in Byte array to be decrypted.
    \param inLen Length of the buffer input.
    \param out Pointer to address containing the PSS data.
    \param hash The hash type to be in message
    \param mgf Mask Generation Function Identifiers
    \param key RsaKey to use.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;
    ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, pSignatureSz,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
    if (ret > 0 ){
        sz = ret;
    } else return -1;

    ret = wc_RsaPSS_VerifyInline(pSignature, sz, pt,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
    if (ret <= 0)return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/


int  wc_RsaPSS_VerifyInline(byte* in, word32 inLen, byte** out,
                                        enum wc_HashType hash, int mgf,
                                        RsaKey* key);
/*!
    \ingroup RSA

    \brief Verify the message signed with RSA-PSS.
    Salt length is equal to hash length.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return the length of the PSS data on success and negative indicates failure.
    \return MEMORY_E memory exception.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out Pointer to address containing the PSS data.
    \param outLen The length of out.
    \param digest Hash of the data that is being verified.
    \param digestLen Length of hash.
    \param hash Hash algorithm.
    \param mgf Mask generation function.
    \param key Public RSA key.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;

    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;

    if (ret == 0) {
        ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, pSignatureSz,
                WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
        if (ret > 0 ){
            sz = ret;
        } else return -1;
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaPSS_VerifyCheck(pSignature, sz, pt, outLen,
                digest, digestSz, WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
            if (ret <= 0) return -1;
    } else return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/

int  wc_RsaPSS_VerifyCheck(byte* in, word32 inLen,
                               byte* out, word32 outLen,
                               const byte* digest, word32 digestLen,
                               enum wc_HashType hash, int mgf,
                               RsaKey* key);
/*!
    \ingroup RSA

    \brief Verify the message signed with RSA-PSS.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return the length of the PSS data on success and negative indicates failure.
    \return MEMORY_E memory exception.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out Pointer to address containing the PSS data.
    \param outLen The length of out.
    \param digest Hash of the data that is being verified.
    \param digestLen Length of hash.
    \param hash Hash algorithm.
    \param mgf Mask generation function.
    \param saltLen  Length of salt used. RSA_PSS_SALT_LEN_DEFAULT (-1) indicates salt
    length is the same as the hash length. RSA_PSS_SALT_LEN_DISCOVER
    indicates salt length is determined from the data.

    \param key Public RSA key.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;

    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;

    if (ret == 0) {
        ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, pSignatureSz,
                WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
        if (ret > 0 ){
            sz = ret;
        } else return -1;
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaPSS_VerifyCheck_ex(pSignature, sz, pt, outLen,
                digest, digestSz, WC_HASH_TYPE_SHA256, WC_MGF1SHA256, saltLen, &key);
            if (ret <= 0) return -1;
    } else return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_VerifyCheck_ex(byte* in, word32 inLen,
                               byte* out, word32 outLen,
                               const byte* digest, word32 digestLen,
                               enum wc_HashType hash, int mgf, int saltLen,
                               RsaKey* key);

/*!
    \ingroup RSA

    \brief Verify the message signed with RSA-PSS.
    The input buffer is reused for the output buffer.
    Salt length is equal to hash length.

    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return the length of the PSS data on success and negative indicates failure.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param digest Hash of the data that is being verified.
    \param digestLen Length of hash.
    \param hash The hash type to be in message
    \param mgf Mask Generation Function Identifiers
    \param key The key to use for verification.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;

    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;

    if (ret == 0) {
        ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, pSignatureSz,
                WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
        if (ret > 0 ){
            sz = ret;
        } else return -1;
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaPSS_VerifyCheckInline(pSignature, sz, pt,
                digest, digestSz, WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
            if (ret <= 0) return -1;
    } else return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_VerifyCheckInline(byte* in, word32 inLen, byte** out,
                               const byte* digest, word32 digentLen,
                               enum wc_HashType hash, int mgf,
                               RsaKey* key);
/*!
    \ingroup RSA

    \brief Verify the message signed with RSA-PSS.
    The input buffer is reused for the output buffer.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return the length of the PSS data on success and negative indicates failure.

    \param in The byte array to be decrypted.
    \param inLen The length of in.
    \param out The byte array for the decrypted data to be stored.
    \param digest Hash of the data that is being verified.
    \param digestLen Length of hash.
    \param hash The hash type to be in message
    \param mgf Mask Generation Function Identifiers
    \param saltLen  Length of salt used. RSA_PSS_SALT_LEN_DEFAULT (-1) indicates salt
    length is the same as the hash length. RSA_PSS_SALT_LEN_DISCOVER
    indicates salt length is determined from the data.
    \param key The key to use for verification.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;

    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;

    if (ret == 0) {
        ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, pSignatureSz,
                WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
        if (ret > 0 ){
            sz = ret;
        } else return -1;
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaPSS_VerifyCheckInline_ex(pSignature, sz, pt,
                digest, digestSz, WC_HASH_TYPE_SHA256, WC_MGF1SHA256, saltLen, &key);
            if (ret <= 0) return -1;
    } else return -1;

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_CheckPadding
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_VerifyCheckInline_ex(byte* in, word32 inLen, byte** out,
                               const byte* digest, word32 digentLen,
                               enum wc_HashType hash, int mgf, int saltLen,
                               RsaKey* key);

/*!
    \ingroup RSA

    \brief Checks the PSS data to ensure that the signature matches.
    Salt length is equal to hash length.
    The key has to be associated with RNG by wc_RsaSetRNG when WC_RSA_BLINDING is enabled.

    \return BAD_PADDING_E when the PSS data is invalid, BAD_FUNC_ARG when
    NULL is passed in to in or sig or inSz is not the same as the hash
    algorithm length and 0 on success.
    \return MEMORY_E memory exception.

    \param in Hash of the data that is being verified.
    \param inSz Length of hash.
    \param sig Buffer holding PSS data.
    \param sigSz Size of PSS data.
    \param hashType Hash algorithm.

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;
    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;
    ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, sizeof(pSignature),
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
    if (ret > 0 ){
        sz = ret;
    } else return -1;

    verify = wc_RsaPSS_Verify(pSignature, sz, out, outLen,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
    if (verify <= 0)return -1;

    ret = wc_RsaPSS_CheckPadding(digest, digestSz, out, verify, hash);

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyInline
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding_ex
    \sa wc_RsaSetRNG
*/
int  wc_RsaPSS_CheckPadding(const byte* in, word32 inLen, byte* sig,
                                        word32 sigSz,
                                        enum wc_HashType hashType);
/*!
    \ingroup RSA

    \brief Checks the PSS data to ensure that the signature matches.
    Salt length is equal to hash length.

    \return BAD_PADDING_E when the PSS data is invalid, BAD_FUNC_ARG when
    NULL is passed in to in or sig or inSz is not the same as the hash
    algorithm length and 0 on success.
    \return MEMORY_E memory exception.

    \param in        Hash of the data that is being verified.
    \param inSz      Length of hash.
    \param sig       Buffer holding PSS data.
    \param sigSz     Size of PSS data.
    \param hashType  Hash algorithm.
    \param saltLen   Length of salt used. RSA_PSS_SALT_LEN_DEFAULT (-1) indicates salt
        length is the same as the hash length. RSA_PSS_SALT_LEN_DISCOVER
        indicates salt length is determined from the data.
    \param bits      Can be used to calculate salt size in FIPS case

    _Example_
    \code
    ret = wc_InitRsaKey(&key, NULL);
    if (ret == 0) {
        ret = wc_InitRng(&rng);
    } else return -1;
    if (ret == 0) {
        ret = wc_RsaSetRNG(&key, &rng);
    } else return -1;
    if (ret == 0) {
            ret = wc_MakeRsaKey(&key, 2048, WC_RSA_EXPONENT, &rng);
    } else return -1;
    if (ret == 0) {
        digestSz = wc_HashGetDigestSize(WC_HASH_TYPE_SHA256);
        ret = wc_Hash(WC_HASH_TYPE_SHA256, message, sz, digest, digestSz);
    } else return -1;
    ret = wc_RsaPSS_Sign(digest, digestSz, pSignature, sizeof(pSignature),
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key, &rng);
    if (ret > 0 ){
        sz = ret;
    } else return -1;

    verify = wc_RsaPSS_Verify(pSignature, sz, out, outLen,
            WC_HASH_TYPE_SHA256, WC_MGF1SHA256, &key);
    if (verify <= 0)return -1;

    ret = wc_RsaPSS_CheckPadding_ex(digest, digestSz, out, verify, hash, saltLen, 0);

    wc_FreeRsaKey(&key);
    wc_FreeRng(&rng);
    \endcode

    \sa wc_RsaPSS_Sign
    \sa wc_RsaPSS_Verify
    \sa wc_RsaPSS_VerifyInline
    \sa wc_RsaPSS_VerifyCheck
    \sa wc_RsaPSS_VerifyCheck_ex
    \sa wc_RsaPSS_VerifyCheckInline
    \sa wc_RsaPSS_VerifyCheckInline_ex
    \sa wc_RsaPSS_CheckPadding
*/
int  wc_RsaPSS_CheckPadding_ex(const byte* in, word32 inLen, byte* sig,
                word32 sigSz, enum wc_HashType hashType, int saltLen, int bits);
/*!
    \ingroup RSA

    \brief Returns the encryption size for the provided key structure.

    \return Success Encryption size for the provided key structure.

    \param key The key to use for verification.

    _Example_
    \code
    int sz = wc_RsaEncryptSize(&key);
    \endcode

    \sa wc_InitRsaKey
    \sa wc_InitRsaKey_ex
    \sa wc_MakeRsaKey
*/
int  wc_RsaEncryptSize(RsaKey* key);

/*!
    \ingroup RSA

    \brief This function parses a DER-formatted RSA private key, extracts the
    private key and stores it in the given RsaKey structure. It also sets the
    distance parsed in idx.

    \return 0 Returned upon successfully parsing the private key from the DER
    encoded input
    \return ASN_PARSE_E Returned if there is an error parsing the private key
    from the input buffer. This may happen if the input private key is not
    properly formatted according to ASN.1 standards
    \return ASN_RSA_KEY_E Returned if there is an error reading the private
    key elements of the RSA key input

    \param input pointer to the buffer containing the DER formatted private
    key to decode
    \param inOutIdx pointer to the index in the buffer at which the key begins
    (usually 0). As a side effect of this function, inOutIdx will store the
    distance parsed through the input buffer
    \param key pointer to the RsaKey structure in which to store the decoded
    private key
    \param inSz size of the input buffer

    _Example_
    \code
    RsaKey enc;
    word32 idx = 0;
    int ret = 0;
    byte der[] = { // initialize with DER-encoded RSA private key };

    wc_InitRsaKey(&enc, NULL); // not using heap hint. No custom memory
    ret = wc_RsaPrivateKeyDecode(der, &idx, &enc, sizeof(der));
    if( ret != 0 ) {
    	// error parsing private key
    }
    \endcode

    \sa wc_RsaPublicKeyDecode
    \sa wc_MakeRsaKey
*/
int  wc_RsaPrivateKeyDecode(const byte* input, word32* inOutIdx,
                            RsaKey* key, word32 inSz);

/*!
    \ingroup RSA

    \brief This function parses a DER-formatted RSA public key, extracts the
    public key and stores it in the given RsaKey structure. It also sets the
    distance parsed in idx.

    \return 0 Returned upon successfully parsing the public key from the DER
    encoded input
    \return ASN_PARSE_E Returned if there is an error parsing the public key
    from the input buffer. This may happen if the input public key is not
    properly formatted according to ASN.1 standards
    \return ASN_OBJECT_ID_E Returned if the ASN.1 Object ID does not match
    that of a RSA public key
    \return ASN_EXPECT_0_E Returned if the input key is not correctly
    formatted according to ASN.1 standards
    \return ASN_BITSTR_E Returned if the input key is not correctly formatted
    according to ASN.1 standards
    \return ASN_RSA_KEY_E Returned if there is an error reading the public key
    elements of the RSA key input

    \param input pointer to the buffer containing the input DER-encoded RSA
    public key to decode
    \param inOutIdx pointer to the index in the buffer at which the key
    begins (usually 0). As a side effect of this function, inOutIdx will
    store the distance parsed through the input buffer
    \param key pointer to the RsaKey structure in which to store the decoded
    public key
    \param inSz size of the input buffer

    _Example_
    \code
    RsaKey pub;
    word32 idx = 0;
    int ret = 0;
    byte der[] = { // initialize with DER-encoded RSA public key };

    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
    ret = wc_RsaPublicKeyDecode(der, &idx, &pub, sizeof(der));
    if( ret != 0 ) {
    	// error parsing public key
    }
    \endcode

    \sa wc_RsaPublicKeyDecodeRaw
*/
int  wc_RsaPublicKeyDecode(const byte* input, word32* inOutIdx,
                           RsaKey* key, word32 inSz);

/*!
    \ingroup RSA

    \brief This function decodes the raw elements of an RSA public key, taking
    in the public modulus (n) and exponent (e). It stores these raw elements
    in the provided RsaKey structure, allowing one to use them in the
    encryption/decryption process.

    \return 0 Returned upon successfully decoding the raw elements of the
    public key into the RsaKey structure
    \return BAD_FUNC_ARG Returned if any of the input arguments evaluates to
    NULL
    \return MP_INIT_E Returned if there is an error initializing an integer
    for use with the multiple precision integer (mp_int) library
    \return ASN_GETINT_E Returned if there is an error reading one of the
    provided RSA key elements, n or e

    \param n pointer to a buffer containing the raw modulus parameter of the
    public RSA key
    \param nSz size of the buffer containing n
    \param e pointer to a buffer containing the raw exponent parameter of
    the public RSA key
    \param eSz size of the buffer containing e
    \param key pointer to the RsaKey struct to initialize with the provided
    public key elements

    _Example_
    \code
    RsaKey pub;
    int ret = 0;
    byte n[] = { // initialize with received n component of public key };
    byte e[] = { // initialize with received e component of public key };

    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
    ret = wc_RsaPublicKeyDecodeRaw(n, sizeof(n), e, sizeof(e), &pub);
    if( ret != 0 ) {
    	// error parsing public key elements
    }
    \endcode

    \sa wc_RsaPublicKeyDecode
*/
int  wc_RsaPublicKeyDecodeRaw(const byte* n, word32 nSz,
                                        const byte* e, word32 eSz, RsaKey* key);

/*!
    \ingroup RSA

    \brief This function converts an RsaKey key to DER format.  The result is
    written to output and it returns the number of bytes written.

    \return 0 Success
    \return BAD_FUNC_ARG Returned if key or output is null, or if key->type
    is not RSA_PRIVATE, or if inLen isn't large enough for output buffer.
    \return MEMORY_E Returned if there is an error allocating memory.

    \param key Initialized RsaKey structure.
    \param output Pointer to output buffer.
    \param inLen Size of output buffer.

    _Example_
    \code
    byte* der;
    // Allocate memory for der
    int derSz = // Amount of memory allocated for der;
    RsaKey key;
    WC_WC_RNG rng;
    long e = 65537; // standard value to use for exponent
    ret = wc_MakeRsaKey(&key, 2048, e, &rng); // generate 2048 bit long
    private key
    wc_InitRsaKey(&key, NULL);
    wc_InitRng(&rng);
    if(wc_RsaKeyToDer(&key, der, derSz) != 0)
    {
        // Handle the error thrown
    }
    \endcode

    \sa wc_RsaKeyToPublicDer
    \sa wc_InitRsaKey
    \sa wc_MakeRsaKey
    \sa wc_InitRng
*/
int wc_RsaKeyToDer(RsaKey* key, byte* output, word32 inLen);

/*!
    \ingroup RSA

    \brief This function performs RSA encrypt while allowing the choice of
    which padding to use.

    \return size On successfully encryption the size of the encrypted buffer
    is returned
    \return RSA_BUFFER_E RSA buffer error, output too small or input too large

    \param in pointer to the buffer for encryption
    \param inLen length of the buffer to encrypt
    \param out encrypted msg created
    \param outLen length of buffer available to hold encrypted msg
    \param key initialized RSA key struct
    \param rng initialized WC_RNG struct
    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
    \param hash type of hash to use (choices can be found in hash.h)
    \param mgf type of mask generation function to use
    \param label an optional label to associate with encrypted message
    \param labelSz size of the optional label used

    _Example_
    \code
    WC_WC_WC_RNG rng;
    RsaKey key;
    byte in[] = “I use Turing Machines to ask questions”
    byte out[256];
    int ret;
    …

    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key, &rng,
    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
    if (ret < 0) {
	    //handle error
    }
    \endcode

    \sa wc_RsaPublicEncrypt
    \sa wc_RsaPrivateDecrypt_ex
*/
int  wc_RsaPublicEncrypt_ex(const byte* in, word32 inLen, byte* out,
                   word32 outLen, RsaKey* key, WC_RNG* rng, int type,
                   enum wc_HashType hash, int mgf, byte* label, word32 labelSz);

/*!
    \ingroup RSA

    \brief This function uses RSA to decrypt a message and gives the
    option of what padding type.

    \return size On successful decryption, the size of the decrypted message
    is returned.
    \return MEMORY_E Returned if not enough memory on system to malloc a
    needed array.
    \return BAD_FUNC_ARG Returned if a bad argument was passed into the
    function.

    \param in pointer to the buffer for decryption
    \param inLen length of the buffer to decrypt
    \param out decrypted msg created
    \param outLen length of buffer available to hold decrypted msg
    \param key initialized RSA key struct
    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
    \param hash type of hash to use (choices can be found in hash.h)
    \param mgf type of mask generation function to use
    \param label an optional label to associate with encrypted message
    \param labelSz size of the optional label used

    _Example_
    \code
    WC_WC_WC_RNG rng;
    RsaKey key;
    byte in[] = “I use Turing Machines to ask questions”
    byte out[256];
    byte plain[256];
    int ret;
    …
    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key,
    &rng, WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
    if (ret < 0) {
	    //handle error
    }
    …
    ret = wc_RsaPrivateDecrypt_ex(out, ret, plain, sizeof(plain), &key,
    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);

    if (ret < 0) {
	    //handle error
    }
    \endcode

    \sa none
*/
int  wc_RsaPrivateDecrypt_ex(const byte* in, word32 inLen,
                   byte* out, word32 outLen, RsaKey* key, int type,
                   enum wc_HashType hash, int mgf, byte* label, word32 labelSz);

/*!
    \ingroup RSA

    \brief This function uses RSA to decrypt a message inline and gives the
    option of what padding type. The in buffer will contain the decrypted
    message after being called and the out byte pointer will point to the
    location in the “in” buffer where the plain text is.

    \return size On successful decryption, the size of the decrypted message
    is returned.
    \return MEMORY_E: Returned if not enough memory on system to malloc a
    needed array.
    \return RSA_PAD_E: Returned if an error in the padding was encountered.
    \return BAD_PADDING_E: Returned if an error happened during parsing past
    padding.
    \return BAD_FUNC_ARG: Returned if a bad argument was passed into the
    function.

    \param in pointer to the buffer for decryption
    \param inLen length of the buffer to decrypt
    \param out pointer to location of decrypted message in “in” buffer
    \param key initialized RSA key struct
    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
    \param hash type of hash to use (choices can be found in hash.h)
    \param mgf type of mask generation function to use
    \param label an optional label to associate with encrypted message
    \param labelSz size of the optional label used

    _Example_
    \code
    WC_WC_WC_RNG rng;
    RsaKey key;
    byte in[] = “I use Turing Machines to ask questions”
    byte out[256];
    byte* plain;
    int ret;
    …
    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key,
    &rng, WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);

    if (ret < 0) {
	    //handle error
    }
    …
    ret = wc_RsaPrivateDecryptInline_ex(out, ret, &plain, &key,
    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);

    if (ret < 0) {
	    //handle error
    }
    \endcode

    \sa none
*/
int  wc_RsaPrivateDecryptInline_ex(byte* in, word32 inLen,
                      byte** out, RsaKey* key, int type, enum wc_HashType hash,
                      int mgf, byte* label, word32 labelSz);

/*!
    \ingroup RSA

    \brief Flattens the RsaKey structure into individual elements (e, n)
    used for the RSA algorithm.

    \return 0 Returned if the function executed normally, without error.
    \return BAD_FUNC_ARG: Returned if any of the parameters are passed in
    with a null value.
    \return RSA_BUFFER_E: Returned if the e or n buffers passed in are not
    the correct size.
    \return MP_MEM: Returned if an internal function has memory errors.
    \return MP_VAL: Returned if an internal function argument is not valid.

    \param key The key to use for verification.
    \param e a buffer for the value of e. e is a large positive integer in
    the RSA modular arithmetic operation.
    \param eSz the size of the e buffer.
    \param n a buffer for the value of n. n is a large positive integer in
    the RSA modular arithmetic operation.
    \param nSz the size of the n buffer.

    _Example_
    \code
    Rsa key; // A valid RSA key.
    byte e[ buffer sz E.g. 256 ];
    byte n[256];
    int ret;
    word32 eSz = sizeof(e);
    word32 nSz = sizeof(n);
    ...
    ret = wc_RsaFlattenPublicKey(&key, e, &eSz, n, &nSz);
    if (ret != 0) {
    	// Failure case.
    }
    \endcode

    \sa wc_InitRsaKey
    \sa wc_InitRsaKey_ex
    \sa wc_MakeRsaKey
*/
int  wc_RsaFlattenPublicKey(RsaKey* key, byte* e, word32* eSz, byte* n,
                            word32* nSz);

/*!
    \ingroup RSA

    \brief Convert Rsa Public key to DER format.  Writes to output, and
    returns count of bytes written.

    \return >0 Success, number of bytes written.
    \return BAD_FUNC_ARG Returned if key or output is null.
    \return MEMORY_E Returned when an error allocating memory occurs.
    \return <0 Error

    \param key The RSA key structure to convert.
    \param output Output buffer to hold DER. (if NULL will return length only)
    \param inLen Length of buffer.

    _Example_
    \code
    RsaKey key;

    wc_InitRsaKey(&key, NULL);
    // Use key

    const int BUFFER_SIZE = 1024; // Some adequate size for the buffer
    byte output[BUFFER_SIZE];
    if (wc_RsaKeyToPublicDer(&key, output, sizeof(output)) != 0) {
        // Handle Error
    }
    \endcode

    \sa wc_RsaPublicKeyDerSize
    \sa wc_RsaKeyToPublicDer_ex
    \sa wc_InitRsaKey
*/
int wc_RsaKeyToPublicDer(RsaKey* key, byte* output, word32 inLen);

/*!
    \ingroup RSA

    \brief Convert RSA Public key to DER format. Writes to output, and
    returns count of bytes written. If with_header is 0 then only the 
    ( seq + n + e) is returned in ASN.1 DER format and will exclude the header.

    \return >0 Success, number of bytes written.
    \return BAD_FUNC_ARG Returned if key or output is null.
    \return MEMORY_E Returned when an error allocating memory occurs.
    \return <0 Error

    \param key The RSA key structure to convert.
    \param output Output buffer to hold DER. (if NULL will return length only)
    \param inLen Length of buffer.

    _Example_
    \code
    RsaKey key;

    wc_InitRsaKey(&key, NULL);
    // Use key

    const int BUFFER_SIZE = 1024; // Some adequate size for the buffer
    byte output[BUFFER_SIZE];
    if (wc_RsaKeyToPublicDer_ex(&key, output, sizeof(output), 0) != 0) {
        // Handle Error
    }
    \endcode

    \sa wc_RsaPublicKeyDerSize
    \sa wc_RsaKeyToPublicDer
    \sa wc_InitRsaKey
*/
int wc_RsaKeyToPublicDer_ex(RsaKey* key, byte* output, word32 inLen,
    int with_header);

/*!
    \ingroup RSA

    \brief This function generates a RSA private key of length size (in bits)
    and given exponent (e). It then stores this key in the provided RsaKey
    structure, so that it may be used for encryption/decryption. A secure
    number to use for e is 65537. size is required to be greater than
    RSA_MIN_SIZE and less than RSA_MAX_SIZE. For this function to be
    available, the option WOLFSSL_KEY_GEN must be enabled at compile time.
    This can be accomplished with --enable-keygen if using ./configure.

    \return 0 Returned upon successfully generating a RSA private key
    \return BAD_FUNC_ARG Returned if any of the input arguments are NULL,
    the size parameter falls outside of the necessary bounds, or e is
    incorrectly chosen
    \return RNG_FAILURE_E Returned if there is an error generating a random
    block using the provided RNG structure
    \return MP_INIT_E
    \return MP_READ_E May be May be returned if there is an error in the math
    library used while generating the RSA key returned if there is an error
    in the math library used while generating the RSA key
    \return MP_CMP_E May be returned if there is an error in the math library
    used while generating the RSA key
    \return MP_INVMOD_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_EXPTMOD_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_MOD_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_MUL_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_ADD_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_MULMOD_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_TO_E May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_MEM May be returned if there is an error in the math
    library used while generating the RSA key
    \return MP_ZERO_E May be returned if there is an error in the math
    library used while generating the RSA key

    \param key pointer to the RsaKey structure in which to store the
    generated private key
    \param size desired key length, in bits. Required to be greater than
    RSA_MIN_SIZE and less than RSA_MAX_SIZE
    \param e exponent parameter to use for generating the key. A secure
    choice is 65537
    \param rng pointer to an RNG structure to use for random number generation
    while making the ke

    _Example_
    \code
    RsaKey priv;
    WC_WC_RNG rng;
    int ret = 0;
    long e = 65537; // standard value to use for exponent

    wc_InitRsaKey(&priv, NULL); // not using heap hint. No custom memory
    wc_InitRng(&rng);
    // generate 2048 bit long private key
    ret = wc_MakeRsaKey(&priv, 2048, e, &rng);
    if( ret != 0 ) {
	    // error generating private key
    }
    \endcode

    \sa none
*/
int wc_MakeRsaKey(RsaKey* key, int size, long e, WC_RNG* rng);

/*!
    \ingroup RSA

    \brief This function sets the non-blocking RSA context. When a RsaNb context
    is set it enables fast math based non-blocking exptmod, which splits the RSA
    function into many smaller operations.
    Enabled when WC_RSA_NONBLOCK is defined.

    \return 0 Success
    \return BAD_FUNC_ARG Returned if key or nb is null.

    \param key The RSA key structure
    \param nb The RSA non-blocking structure for this RSA key to use.

    _Example_
    \code
    int ret, count = 0;
    RsaKey key;
    RsaNb  nb;

    wc_InitRsaKey(&key, NULL);

    // Enable non-blocking RSA mode - provide context
    ret = wc_RsaSetNonBlock(key, &nb);
    if (ret != 0)
        return ret;

    do {
        ret = wc_RsaSSL_Sign(in, inLen, out, outSz, key, rng);
        count++; // track number of would blocks
        if (ret == FP_WOULDBLOCK) {
            // do "other" work here
        }
    } while (ret == FP_WOULDBLOCK);
    if (ret < 0) {
        return ret;
    }

    printf("RSA non-block sign: size %d, %d times\n", ret, count);
    \endcode

    \sa wc_RsaSetNonBlockTime
*/
int wc_RsaSetNonBlock(RsaKey* key, RsaNb* nb);

/*!
    \ingroup RSA

    \brief This function configures the maximum amount of blocking time in
    microseconds. It uses a pre-computed table (see tfm.c exptModNbInst) along
    with the CPU speed in megahertz to determine if the next operation can be
    completed within the maximum blocking time provided.
    Enabled when WC_RSA_NONBLOCK_TIME is defined.

    \return 0 Success
    \return BAD_FUNC_ARG Returned if key is null or wc_RsaSetNonBlock was not
    previously called and key->nb is null.

    \param key The RSA key structure.
    \param maxBlockUs Maximum time to block microseconds.
    \param cpuMHz CPU speed in megahertz.

    _Example_
    \code
    RsaKey key;
    RsaNb  nb;

    wc_InitRsaKey(&key, NULL);
    wc_RsaSetNonBlock(key, &nb);
    wc_RsaSetNonBlockTime(&key, 4000, 160); // Block Max = 4 ms, CPU = 160MHz

    \endcode

    \sa wc_RsaSetNonBlock
*/
int wc_RsaSetNonBlockTime(RsaKey* key, word32 maxBlockUs,
    word32 cpuMHz);