wolfSSL for Alpha Project AP-RA6M-0A Setup Guide

Description

This directory contains e2studio projects targeted at the Alpha Project AP-RA6M-0A board including the Renesas RA 32-bit MCUs. The example projects include a wolfSSL TLS client and server. They also include benchmark and cryptography tests for the wolfCrypt library.

The wolfssl project contains both the wolfSSL and wolfCrypt libraries. It is built as a Renesas RA C Library Project and contains the Renesas RA configuration.

The other projects (benchmark, client, server and test) are built as a Renesas RA C Project Using RA Library, where the RA library is the wolfssl project. The wolfssl Project Summary is listed below and is relevant for every project.

Project Summary

Item	Name/Version
e2studio	2020-07
Board	AP-RA6M-0A
Device	R7FA6M3AH3CFC
Toolchain	GCC ARM Embedded
FSP Version	1.3.0

Selected software components

Component	Version
Board Support Package Common Files	v1.3.0
Arm CMSIS Version 5 - Core (M)	v5.7.0
Board support package for R7FA6M3AH3CFC	v1.3.0
Board support package for RA6M3	v1.3.0
Board support package for RA6M3 - FSP Data	v1.3.0
FreeRTOS	v1.3.0
FreeRTOS - Buffer Allocation 2	v1.3.0
FreeRTOS+TCP	v1.3.0
r_ether to FreeRTOS+TCP Wrapper	v1.3.0
Ethernet	v1.3.0
Ethernet PHY	v1.3.0
I/O Port	v1.3.0
BSP-Board	v1.2.0

Setup Steps

The project directories are missing files necessary to build the project.\ These files can be generated when creating a new Renesas RA Project.\ The following steps explain how to generate the missing files and where to place them.

1.) Download Alpha project example program from Alpha Project Home Page

Unzip the downloaded example project

2.) Create a 'dummy' Renesas RA C Library Project on e2studio

Click File->New->RA C/C++ Project
Enter dummy_library as the project name. Click Next.
Select Board: Custom User Board.
Select `R7FA6M3AH3CFC
Under RTOS: No RTOS, select FreeRTOS.
Click Next. Select FreeRTOS - Minimal - Static Allocation
Click Renesas RA C Library Project. Click Next
Click Finish.

3.) Create a 'dummy' Renesas RA C Project Using RA Library on e2studio

Click File->New->RA C/C++ Project
Enter dummy_app as the project name. Click Next.
Under RA library project, select dummy_library.
Click Executable Using an RA Static Library. Click Next
Click Finish.
Enter dummy_app as Project name
Select RA library project dummy_library

4.) Import all the wolfSSL Projects into e2studio workspace.

Click File->Open Projects from File System
Click Directory... to the right of Import source
Select the RA6M3G folder location that contains the projects example path: wolfssl/IDE/Renesas/e2studio/RA6M3
Deselect the Non-Eclipse project, RA6M3G, by clicking the checkbox Only the folders with 'Eclipse project' under 'Import as' need to be selected.
Click Finish.

5.) Copy files from dummy_library into wolfSSL_RA6M3G

Expand the dummy_library and wolfSSL_RA6M3G projects (Click the drop-down arrow to the left of the project name.)
Select and Copy the following folders/files inside dummy_library

ra/
ra_gen/
ra_cfg/
script/
Paste the copied folders/files into wolfSSL_RA6M3G
The dummy_library project can now be deleted.
Copy APRA6M0A.pincfg from ap_ra6m_0a_sample\sample\ap_ra6m_0a_ether_sample to wolfSSL_RA6M3G
Delete R7FA6M3AH3CFC.pincfg from wolfSSL_RA6M3G
Generate Project Content.
- Click Open RA Configuration in the top bar (Grey Settings Cog)
- Go to BSP tab and import CMSIS pack file, AP.APRA6M0A.x.x.x.pack, from ap_ra6m_0a_sample\sample folder
- Select APRA6M0A as Board
- Go to Pins tab and select APRA6M0A.pincfg
- Go to Stacks tab and add Heap 4 stack from New Stack(+ Icon)
- Click Generate Project Content at top right (Green Icon)
Build wolfSSL_RA6M3G.

6.) Copy files from dummy_app into ./IDE/Renesas/e2studio/RA6M3/common/ra6m3g/

**NOTE:** This may need to be done outside of the e2studio environment (e.g. File Explorer).

Select and Copy the following folder inside dummy_app

src/
script/
Paste the copied folders into ./IDE/Renesas/e2studio/RA6M3/common/ra6m3g/ (The test, benchmark, client and server projects link to this folder.)
The dummy_app project can now be deleted.

7.) Setup Network Environment

    The client and server projects have defines inside their wolfssl_thread_entry.h.
    These defines (ucIPAddress ... ucDNSServerAddress) may need to be changed
    based on your internal network environment.  The g_ether0_mac_address is the default
    mac address found inside the RA configuration inside the wolfssl project.
    The client wolfssl_thread_entry.h has defines (SERVER_IP and DEFAULT_PORT) that
    will need to be changed based on the server you're trying to connect to over
    the ethernet connection.

Build and Run

Build Each Project

Right-Click each Project and select Build.

Run wolfCrypt Test and Benchmark

1.) Right-Click the Project name.
2.) Select Debug As -> Renesas GDB Hardware Debugging
3.) Select J-Link ARM. Click OK.
4.) Select R7Fa6M3AH. Click OK.

Run the wolfSSL TLS Server Example.

1.) Right-Click the Project name.
2.) Select Debug As -> Renesas GDB Hardware Debugging
3.) Select J-Link ARM. Click OK.
4.) Select R7Fa6M3AH. Click OK.
5.) Run the following wolfSSL example client command inside the base of the wolfssl directory.

./examples/client/client -v 4 -h "ucIPAddress" -p 11111 -A ./certs/1024/ca-cert.pem

NOTE: "ucIPAddress" is "192.168.1.241" by default. (See wolfssl_thread_entry.h)

Run the wolfSSL TLS Client Example.

1.) Run the following wolfSSL example server command inside the base of the wolfssl directory.

./examples/server/server -v 4 -b -d -p 11111 -c ./certs/1024/server-cert.pem -k ./certs/1024/server-key.pem

NOTE: The port 11111 is the DEFAULT_PORT inside wolfssl_thread_entry.h. If DEFAULT_PORT was changed then the above command will need to match it.

2.) Right-Click the Project name.\ 3.) Select Debug As -> Renesas GDB Hardware Debugging\ 4.) Select J-Link ARM. Click OK.\ 5.) Select R7Fa6M3AH. Click OK.

Troubleshooting

The commands for the example client/server assumes it is being run from the base directory of wolfssl.
Enter "#define DEBUG_WOLFSSL" inside user_settings.h or wolfssl_thread_entry.c to enable wolfssl debug messages to the Renesas Virtual Debug Console.
Some linking errors can be caused by the e2studio project files needing to be rebuilt and freshened. Right-Click a project, select Index, click Rebuild and then click Freshen Files. Repeat for each project.

Support Forum

Support Email: support@wolfssl.com