wolfssl/examples/configs/user_settings_arduino.h

/* examples/configs/user_settings_arduino.h
 *
 * Copyright (C) 2006-2024 wolfSSL Inc.
 *
 * This file is part of wolfSSL.
 *
 * wolfSSL is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * wolfSSL is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
 */

/* This is a sample Arduino user_settings.h for wolfSSL
  >> Edit with caution. This is the file copied to wolfSSL Arduino library.
  >> at publish time. (lines with ">>" are removed)
*/

/* Define a macro to display user settings version in example code: */
#define WOLFSSL_USER_SETTINGS_ID "Arduino user_settings.h v5.6.7"

/* Due to limited build control, we'll ignore file warnings. */
/* See https://github.com/arduino/arduino-cli/issues/631     */
#undef  WOLFSSL_IGNORE_FILE_WARN
#define WOLFSSL_IGNORE_FILE_WARN

#define NO_FILESYSTEM
#define USE_CERT_BUFFERS_2048

/* Make sure this is not an ESP-IDF file */
#undef  WOLFSSL_ESPIDF

#define HAVE_ECC
#define WOLFSSL_SMALL_STACK
/* #define WOLFSSL_SMALL_STACK_EXTRA    */
/* #define WOLFSSL_SMALL_STACK_CIPHERS  */
/* #define NO_DH                        */
#define MICRO_SESSION_CACHE

/* RSA must be enabled for examples, but can be disabled like this: */
/* #define NO_RSA */
#define RSA_LOW_MEM

#define NO_OLD_TLS
/* TLS 1.3                                 */
/* #define WOLFSSL_TLS13 */
#if defined(WOLFSSL_TLS13)
    #define HAVE_TLS_EXTENSIONS
    #define WC_RSA_PSS
    #define HAVE_HKDF
    #define HAVE_AEAD
#endif

/*  #define HAVE_SUPPORTED_CURVES  */

/* Cannot use WOLFSSL_NO_MALLOC with small stack */
/* #define WOLFSSL_NO_MALLOC */

#define HAVE_TLS_EXTENSIONS
#define HAVE_SUPPORTED_CURVES

/* To further reduce size, client or server functionality can be disabled.
 * Here, we check if the example code gave us a hint.
 *
 * The calling application can define either one of these macros before
 * including the Arduino wolfssl.h library file:
 *
 *    WOLFSSL_CLIENT_EXAMPLE
 *    WOLFSSL_SERVER_EXAMPLE
 */
#if defined(WOLFSSL_CLIENT_EXAMPLE)
    #define NO_WOLFSSL_SERVER
#elif defined(WOLFSSL_SERVER_EXAMPLE)
    #define NO_WOLFSSL_CLIENT
#else
    /* Provide a hint to application that neither WOLFSSL_CLIENT_EXAMPLE
     * or WOLFSSL_SERVER_EXAMPLE macro hint was desired but not found. */
    #define NO_WOLFSSL_SERVER_CLIENT_MISSING
    #warning "Define WOLFSSL_CLIENT_EXAMPLE or WOLFSSL_SERVER_EXAMPLE to" \
             " optimize memory for small embedded devices."
    /* Both can be disabled in wolfssl test & benchmark */
#endif


#define NO_DH
#define NO_DSA
#define USE_FAST_MATH
#define WOLFSSL_SMALL_STACK
#define SINGLE_THREADED
#define WOLFSSL_LOW_MEMORY
#define HAVE_AESGCM

/* optionally turn off SHA512/224 SHA512/256 */
/* #define WOLFSSL_NOSHA512_224 */
/* #define WOLFSSL_NOSHA512_256 */

/* when you want to use SINGLE THREAD. Note Default ESP-IDF is FreeRTOS */
#define SINGLE_THREADED


/* Optional OPENSSL compatibility */
/* #define OPENSSL_EXTRA */
/* #define OPENSSL_ALL */

/* when you want to use pkcs7 */
/* #define HAVE_PKCS7 */

/* when you want to use AES counter mode */
/* #define WOLFSSL_AES_DIRECT */
/* #define WOLFSSL_AES_COUNTER */

/* esp32-wroom-32se specific definition */
#if defined(WOLFSSL_ESPWROOM32SE)
    #define WOLFSSL_ATECC508A
    #define HAVE_PK_CALLBACKS
    /* when you want to use a custom slot allocation for ATECC608A */
    /* unless your configuration is unusual, you can use default   */
    /* implementation.                                             */
    /* #define CUSTOM_SLOT_ALLOCATION                              */
#endif

/* RSA primitive specific definition */
#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
    /* Define USE_FAST_MATH and SMALL_STACK                        */
    #define ESP32_USE_RSA_PRIMITIVE

    #if defined(CONFIG_IDF_TARGET_ESP32)

        /* NOTE HW unreliable for small values! */
        /* threshold for performance adjustment for HW primitive use   */
        /* X bits of G^X mod P greater than                            */
        #undef  ESP_RSA_EXPT_XBITS
        #define ESP_RSA_EXPT_XBITS 32

        /* X and Y of X * Y mod P greater than                         */
        #undef  ESP_RSA_MULM_BITS
        #define ESP_RSA_MULM_BITS  16

    #endif
#endif

/* #define WOLFSSL_ATECC508A_DEBUG         */

/* date/time                               */
/* if it cannot adjust time in the device, */
/* enable macro below                      */
/* #define NO_ASN_TIME */
/* #define XTIME time */


/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
#define ESP_RSA_TIMEOUT_CNT    0x249F00

#define HASH_SIZE_LIMIT /* for test.c */

/* USE_FAST_MATH is default */
#define USE_FAST_MATH

/*****      Use SP_MATH      *****/
/* #undef USE_FAST_MATH          */
/* #define SP_MATH               */
/* #define WOLFSSL_SP_MATH_ALL   */

/***** Use Integer Heap Math *****/
/* #undef USE_FAST_MATH          */
/* #define USE_INTEGER_HEAP_MATH */

/* Default is HW enabled unless turned off.
** Uncomment these lines to force SW instead of HW acceleration */

#if defined(CONFIG_IDF_TARGET_ESP32)
    /* wolfSSL HW Acceleration supported on ESP32. Uncomment to disable: */
    /*  #define NO_ESP32_CRYPT                 */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_AES     */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD */

    /*  These are defined automatically in esp32-crypt.h, here for clarity:  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA224 /* no SHA224 HW on ESP32  */

    #undef  ESP_RSA_MULM_BITS
    #define ESP_RSA_MULM_BITS 16 /* TODO add compile-time warning */
    /***** END CONFIG_IDF_TARGET_ESP32 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32S2)
    /* wolfSSL HW Acceleration supported on ESP32-S2. Uncomment to disable: */
    /*  #define NO_ESP32_CRYPT                 */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
    /* Note: There's no AES192 HW on the ESP32-S2; falls back to SW */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_AES     */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD */
    /***** END CONFIG_IDF_TARGET_ESP32S2 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32S3)
    /* wolfSSL HW Acceleration supported on ESP32-S3. Uncomment to disable: */
    /*  #define NO_ESP32_CRYPT                         */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH            */
    /* Note: There's no AES192 HW on the ESP32-S3; falls back to SW */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_AES             */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI         */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD */
    /***** END CONFIG_IDF_TARGET_ESP32S3 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32C2) || \
      defined(CONFIG_IDF_TARGET_ESP8684)
    /* ESP8684 is essentially ESP32-C2 chip + flash embedded together in a
     * single QFN 4x4 mm package. Out of released documentation, Technical
     * Reference Manual as well as ESP-IDF Programming Guide is applicable
     * to both ESP32-C2 and ESP8684.
     *
     * See: https://www.esp32.com/viewtopic.php?f=5&t=27926#:~:text=ESP8684%20is%20essentially%20ESP32%2DC2,both%20ESP32%2DC2%20and%20ESP8684. */

    /* wolfSSL HW Acceleration supported on ESP32-C2. Uncomment to disable: */
    /*  #define NO_ESP32_CRYPT                 */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */ /* to disable all SHA HW   */

    /* These are defined automatically in esp32-crypt.h, here for clarity    */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA384    /* no SHA384 HW on C2  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA512    /* no SHA512 HW on C2  */

    /* There's no AES or RSA/Math accelerator on the ESP32-C2
     * Auto defined with NO_WOLFSSL_ESP32_CRYPT_RSA_PRI, for clarity: */
    #define NO_WOLFSSL_ESP32_CRYPT_AES
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD
    /***** END CONFIG_IDF_TARGET_ESP32C2 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32C3)
    /* wolfSSL HW Acceleration supported on ESP32-C3. Uncomment to disable: */

    /*  #define NO_ESP32_CRYPT                 */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */ /* to disable all SHA HW   */

    /* These are defined automatically in esp32-crypt.h, here for clarity:  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA384    /* no SHA384 HW on C6  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA512    /* no SHA512 HW on C6  */

    /*  #define NO_WOLFSSL_ESP32_CRYPT_AES             */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI         */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD */
    /***** END CONFIG_IDF_TARGET_ESP32C3 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32C6)
    /* wolfSSL HW Acceleration supported on ESP32-C6. Uncomment to disable: */

    /*  #define NO_ESP32_CRYPT                 */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
    /*  These are defined automatically in esp32-crypt.h, here for clarity:  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA384    /* no SHA384 HW on C6  */
    #define NO_WOLFSSL_ESP32_CRYPT_HASH_SHA512    /* no SHA512 HW on C6  */

    /*  #define NO_WOLFSSL_ESP32_CRYPT_AES             */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI         */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD  */
    /*  #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD */
    /***** END CONFIG_IDF_TARGET_ESP32C6 *****/

#elif defined(CONFIG_IDF_TARGET_ESP32H2)
    /*  wolfSSL Hardware Acceleration not yet implemented */
    #define NO_ESP32_CRYPT
    #define NO_WOLFSSL_ESP32_CRYPT_HASH
    #define NO_WOLFSSL_ESP32_CRYPT_AES
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
    /***** END CONFIG_IDF_TARGET_ESP32H2 *****/

#elif defined(CONFIG_IDF_TARGET_ESP8266)
    /*  TODO: Revisit ESP8266 */
    #define NO_ESP32_CRYPT
    #define NO_WOLFSSL_ESP32_CRYPT_HASH
    #define NO_WOLFSSL_ESP32_CRYPT_AES
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
    /***** END CONFIG_IDF_TARGET_ESP266 *****/
#else
    /* Anything else encountered, disable HW acceleration */
    #define NO_ESP32_CRYPT
    #define NO_WOLFSSL_ESP32_CRYPT_HASH
    #define NO_WOLFSSL_ESP32_CRYPT_AES
    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
#endif /* CONFIG_IDF_TARGET Check */

#define DEBUG_WOLFSSL
/* Debug options:

#define ESP_VERIFY_MEMBLOCK
#define DEBUG_WOLFSSL
#define DEBUG_WOLFSSL_VERBOSE
#define DEBUG_WOLFSSL_SHA_MUTEX
#define WOLFSSL_ESP32_CRYPT_DEBUG
#define WOLFSSL_ESP32_CRYPT_HASH_SHA224_DEBUG
#define NO_RECOVER_SOFTWARE_CALC
#define WOLFSSL_TEST_STRAY 1
#define USE_ESP_DPORT_ACCESS_READ_BUFFER
#define WOLFSSL_ESP32_HW_LOCK_DEBUG
#define WOLFSSL_DEBUG_ESP_RSA_MULM_BITS
#define ESP_DISABLE_HW_TASK_LOCK
*/

#define WOLFSSL_ESPIDF_ERROR_PAUSE /* Pause in a loop rather than exit. */
#define WOLFSSL_HW_METRICS
#define ALT_ECC_SIZE
/* #define HASH_SIZE_LIMIT */ /* for test.c */

/* #define NO_HW_MATH_TEST */ /* Optionally turn off HW math checks */

/* Optionally include alternate HW test library: alt_hw_test.h */
/* When enabling, the ./components/wolfssl/CMakeLists.txt file
 * will need the name of the library in the idf_component_register
 * for the PRIV_REQUIRES list. */
/* #define INCLUDE_ALT_HW_TEST */

/* optionally turn off individual math HW acceleration features */

/* Turn off Large Number ESP32 HW Multiplication:
** [Z = X * Y] in esp_mp_mul()                                  */
/* #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MP_MUL                */

/* Turn off Large Number ESP32 HW Modular Exponentiation:
** [Z = X^Y mod M] in esp_mp_exptmod()                          */
/* #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_EXPTMOD               */

/* Turn off Large Number ESP32 HW Modular Multiplication
** [Z = X * Y mod M] in esp_mp_mulmod()                         */
/* #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI_MULMOD                */


#define WOLFSSL_PUBLIC_MP /* used by benchmark */

/* when turning on ECC508 / ECC608 support
#define WOLFSSL_ESPWROOM32SE
#define HAVE_PK_CALLBACKS
#define WOLFSSL_ATECC508A
#define ATCA_WOLFSSL
*/

/* optional SM4 Ciphers. See https://github.com/wolfSSL/wolfsm
/* The section below defines macros used in typically all of the wolfSSL
 * examples such as the client and server for certs stored in header files.
 *
 * There are various certificate examples in this header file:
 * https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/certs_test.h
 *
 * To use the sets of macros below, define *one* of these:
 *
 *    USE_CERT_BUFFERS_1024  - ECC 1024 bit encoded ASN1
 *    USE_CERT_BUFFERS_2048  - RSA 2048 bit encoded ASN1
 *    WOLFSSL_SM[2,3,4]      - SM Ciphers
 *
 * For example: define USE_CERT_BUFFERS_2048 to use CA Certs used in this
 *  wolfSSL function for the `ca_cert_der_2048` buffer, size and types:
 *
 *     ret = wolfSSL_CTX_load_verify_buffer(ctx,
 *                                          CTX_CA_CERT,
 *                                          CTX_CA_CERT_SIZE,
 *                                          CTX_CA_CERT_TYPE);
 *
 * See https://www.wolfssl.com/documentation/manuals/wolfssl/group__CertsKeys.html#function-wolfssl_ctx_load_verify_buffer
 *
 * In this case the CTX_CA_CERT will be defined as `ca_cert_der_2048` as
 * defined here: https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/certs_test.h
 *
 * The CTX_CA_CERT_SIZE and CTX_CA_CERT_TYPE are similarly used to reference
 * array size and cert type respectively.
 *
 * Similarly for loading the private client key:
 *
 *  ret = wolfSSL_CTX_use_PrivateKey_buffer(ctx,
 *                                          CTX_CLIENT_KEY,
 *                                          CTX_CLIENT_KEY_SIZE,
 *                                          CTX_CLIENT_KEY_TYPE);
 *
 * see https://www.wolfssl.com/documentation/manuals/wolfssl/group__CertsKeys.html#function-wolfssl_ctx_use_privatekey_buffer
 *
 * Similarly, the other macros are for server certificates and keys:
 *   `CTX_SERVER_CERT` and `CTX_SERVER_KEY` are available.
 *
 * The certificate and key names are typically `static const unsigned char`
 * arrays. The [NAME]_size are typically `sizeof([array name])`, and the types
 * are the known wolfSSL encoding type integers (e.g. WOLFSSL_FILETYPE_PEM).
 *
 * See `SSL_FILETYPE_[name]` in
 *   https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/ssl.h
 *
 * See Abstract Syntax Notation One (ASN.1) in:
 *   https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/wolfcrypt/asn.h
 *
 * Optional SM4 Ciphers:
 *
 * Although the SM ciphers are shown here, the `certs_test_sm.h` may not yet
 * be available. See:
 *   https://github.com/wolfSSL/wolfssl/pull/6825
 *   https://github.com/wolfSSL/wolfsm
 *
 * Uncomment these 3 macros to enable the SM Ciphers and use the macros below.
 */

/*
#define WOLFSSL_SM2
#define WOLFSSL_SM3
#define WOLFSSL_SM4
*/

/* Conditional macros used in wolfSSL TLS client and server examples */
#if defined(WOLFSSL_SM2) || defined(WOLFSSL_SM3) || defined(WOLFSSL_SM4)
    #include <wolfssl/certs_test_sm.h>
    #define CTX_CA_CERT          root_sm2
    #define CTX_CA_CERT_SIZE     sizeof_root_sm2
    #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_PEM
    #define CTX_SERVER_CERT      server_sm2
    #define CTX_SERVER_CERT_SIZE sizeof_server_sm2
    #define CTX_SERVER_CERT_TYPE WOLFSSL_FILETYPE_PEM
    #define CTX_SERVER_KEY       server_sm2_priv
    #define CTX_SERVER_KEY_SIZE  sizeof_server_sm2_priv
    #define CTX_SERVER_KEY_TYPE  WOLFSSL_FILETYPE_PEM

    #undef  WOLFSSL_BASE16
    #define WOLFSSL_BASE16
#else
    #if defined(USE_CERT_BUFFERS_2048)
        #ifdef USE_CERT_BUFFERS_1024
            #error "USE_CERT_BUFFERS_1024 is already defined. Pick one."
        #endif
        #include <wolfssl/certs_test.h>
        #define CTX_CA_CERT          ca_cert_der_2048
        #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_2048
        #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1

        #define CTX_SERVER_CERT      server_cert_der_2048
        #define CTX_SERVER_CERT_SIZE sizeof_server_cert_der_2048
        #define CTX_SERVER_CERT_TYPE WOLFSSL_FILETYPE_ASN1
        #define CTX_SERVER_KEY       server_key_der_2048
        #define CTX_SERVER_KEY_SIZE  sizeof_server_key_der_2048
        #define CTX_SERVER_KEY_TYPE  WOLFSSL_FILETYPE_ASN1

        #define CTX_CLIENT_CERT      client_cert_der_2048
        #define CTX_CLIENT_CERT_SIZE sizeof_client_cert_der_2048
        #define CTX_CLIENT_CERT_TYPE WOLFSSL_FILETYPE_ASN1
        #define CTX_CLIENT_KEY       client_key_der_2048
        #define CTX_CLIENT_KEY_SIZE  sizeof_client_key_der_2048
        #define CTX_CLIENT_KEY_TYPE  WOLFSSL_FILETYPE_ASN1
    #elif defined(USE_CERT_BUFFERS_1024)
        #ifdef USE_CERT_BUFFERS_2048
            #error "USE_CERT_BUFFERS_2048 is already defined. Pick one."
        #endif
        #include <wolfssl/certs_test.h>
        #define CTX_CA_CERT          ca_cert_der_1024
        #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_1024
        #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1

        #define CTX_CLIENT_CERT      client_cert_der_1024
        #define CTX_CLIENT_CERT_SIZE sizeof_client_cert_der_1024
        #define CTX_CLIENT_CERT_TYPE WOLFSSL_FILETYPE_ASN1
        #define CTX_CLIENT_KEY       client_key_der_1024
        #define CTX_CLIENT_KEY_SIZE  sizeof_client_key_der_1024
        #define CTX_CLIENT_KEY_TYPE  WOLFSSL_FILETYPE_ASN1

        #define CTX_SERVER_CERT      server_cert_der_1024
        #define CTX_SERVER_CERT_SIZE sizeof_server_cert_der_1024
        #define CTX_SERVER_CERT_TYPE WOLFSSL_FILETYPE_ASN1
        #define CTX_SERVER_KEY       server_key_der_1024
        #define CTX_SERVER_KEY_SIZE  sizeof_server_key_der_1024
        #define CTX_SERVER_KEY_TYPE  WOLFSSL_FILETYPE_ASN1
    #else
        #error "Must define USE_CERT_BUFFERS_2048 or USE_CERT_BUFFERS_1024"
    #endif
#endif