wolfssl/doc/dox_comments/header_files/wc_encrypt.h

/*!
    \ingroup AES
    \brief Decrypts a cipher from the input buffer in, and places the
    resulting plain text in the output buffer out using cipher block
    chaining with AES. This function does not require an AES structure
    to be initialized. Instead, it takes in a key and an iv
    (initialization vector) and uses these to initialize an
    AES object and then decrypt the cipher text.

    \return 0 On successfully decrypting message
    \return BAD_ALIGN_E Returned on block align error
    \return BAD_FUNC_ARG Returned if key length is invalid or AES object
    is null during AesSetIV
    \return MEMORY_E Returned if WOLFSSL_SMALL_STACK is enabled and
    XMALLOC fails to instantiate an AES object.

    \param out pointer to the output buffer in which to store the plain
    text of the decrypted message
    \param in pointer to the input buffer containing cipher text to be
    decrypted
    \param inSz size of input message
    \param key 16, 24, or 32 byte secret key for decryption
    \param keySz size of key used for decryption

    _Example_
    \code
    int ret = 0;
    byte key[] = { some 16, 24, or 32 byte key };
    byte iv[]  = { some 16 byte iv };
    byte cipher[AES_BLOCK_SIZE * n]; //n being a positive integer making
    cipher some multiple of 16 bytes
    // fill cipher with cipher text
    byte plain [AES_BLOCK_SIZE * n];
    if ((ret = wc_AesCbcDecryptWithKey(plain, cipher, AES_BLOCK_SIZE, key,
    AES_BLOCK_SIZE, iv)) != 0 ) {
	// Decrypt Error
    }
    \endcode

    \sa wc_AesSetKey
    \sa wc_AesSetIV
    \sa wc_AesCbcEncrypt
    \sa wc_AesCbcDecrypt
*/
WOLFSSL_API int  wc_AesCbcDecryptWithKey(byte* out, const byte* in, word32 inSz,
                                         const byte* key, word32 keySz,
                                         const byte* iv);

/*!
    \ingroup 3DES

    \brief This function decrypts the input ciphertext, in, and stores the
    resulting plaintext in the output buffer, out. It uses DES encryption
    with cipher block chaining (CBC) mode. This function is a substitute
    for wc_Des_CbcDecrypt, allowing the user to decrypt a message without
    directly instantiating a Des structure.

    \return 0 Returned upon successfully decrypting the given ciphertext
    \return MEMORY_E Returned if there is an error allocating space for a
    Des structure

    \param out pointer to the buffer in which to store the decrypted plaintext
    \param in pointer to the input buffer containing the encrypted ciphertext
    \param sz length of the ciphertext to decrypt
    \param key pointer to the buffer containing the 8 byte key to use for
    decryption
    \param iv pointer to the buffer containing the 8 byte iv to use for
    decryption. If no iv is provided, the iv defaults to 0

    _Example_
    \code
    int ret;
    byte key[] = { // initialize with 8 byte key };
    byte iv[]  = { // initialize with 8 byte iv };

    byte cipher[]  = { // initialize with ciphertext };
    byte decoded[sizeof(cipher)];

    if ( wc_Des_CbcDecryptWithKey(decoded, cipher, sizeof(cipher), key,
    iv) != 0) {
    	// error decrypting message
    }
    \endcode

    \sa wc_Des_CbcDecrypt
*/
WOLFSSL_API int  wc_Des_CbcDecryptWithKey(byte* out,
                                          const byte* in, word32 sz,
                                          const byte* key, const byte* iv);

/*!
    \ingroup 3DES

    \brief This function encrypts the input plaintext, in, and stores the
    resulting ciphertext in the output buffer, out. It uses DES encryption
    with cipher block chaining (CBC) mode. This function is a substitute
    for wc_Des_CbcEncrypt, allowing the user to encrypt a message without
    directly instantiating a Des structure.

    \return 0 Returned after successfully encrypting data.
    \return MEMORY_E Returned if there's an error allocating memory for a
    Des structure.
    \return <0 Returned on any error during encryption.

    \param out Final encrypted data
    \param in Data to be encrypted, must be padded to Des block size.
    \param sz Size of input buffer.
    \param key Pointer to the key to use for encryption.
    \param iv Initialization vector

    _Example_
    \code
    byte key[] = { // initialize with 8 byte key };
    byte iv[]  = { // initialize with 8 byte iv };
    byte in[] = { // Initialize with plaintext };
    byte out[sizeof(in)];
    if ( wc_Des_CbcEncryptWithKey(&out, in, sizeof(in), key, iv) != 0)
    {
    	// error encrypting message
    }
    \endcode

    \sa wc_Des_CbcDecryptWithKey
    \sa wc_Des_CbcEncrypt
*/
WOLFSSL_API int  wc_Des_CbcEncryptWithKey(byte* out,
                                          const byte* in, word32 sz,
                                          const byte* key, const byte* iv);

/*!
    \ingroup 3DES

    \brief This function encrypts the input plaintext, in, and stores
    the resulting ciphertext in the output buffer, out. It uses Triple
    DES (3DES) encryption with cipher block chaining (CBC) mode. This
    function is a substitute for wc_Des3_CbcEncrypt, allowing the user
    to encrypt a message without directly instantiating a Des3 structure.

    \return 0 Returned after successfully encrypting data.
    \return MEMORY_E Returned if there's an error allocating memory for
    a Des structure.
    \return <0 Returned on any error during encryption.

    \parma out Final encrypted data
    \param in Data to be encrypted, must be padded to Des block size.
    \param sz Size of input buffer.
    \param key Pointer to the key to use for encryption.
    \param iv Initialization vector

    _Example_
    \code
    byte key[] = { // initialize with 8 byte key };
    byte iv[]  = { // initialize with 8 byte iv };

    byte in[] = { // Initialize with plaintext };
    byte out[sizeof(in)];

    if ( wc_Des3_CbcEncryptWithKey(&out, in, sizeof(in), key, iv) != 0)
    {
    	// error encrypting message
    }
    \endcode

    \sa wc_Des3_CbcDecryptWithKey
    \sa wc_Des_CbcEncryptWithKey
    \sa wc_Des_CbcDecryptWithKey
*/
WOLFSSL_API int  wc_Des3_CbcEncryptWithKey(byte* out,
                                           const byte* in, word32 sz,
                                           const byte* key, const byte* iv);

/*!
    \ingroup 3DES

    \brief This function decrypts the input ciphertext, in, and stores
    the resulting plaintext in the output buffer, out. It uses Triple
    Des (3DES) encryption with cipher block chaining (CBC) mode. This
    function is a substitute for wc_Des3_CbcDecrypt, allowing the user
    to decrypt a message without directly instantiating a Des3 structure.

    \return 0 Returned upon successfully decrypting the given ciphertext
    \return MEMORY_E Returned if there is an error allocating space for
    a Des structure

    \param out pointer to the buffer in which to store the decrypted plaintext
    \param in pointer to the input buffer containing the encrypted ciphertext
    \param sz length of the ciphertext to decrypt
    \param key pointer to the buffer containing the 24 byte key to use
    for decryption
    \param iv pointer to the buffer containing the 8 byte iv to use for
    decryption. If no iv is provided, the iv defaults to 0

    _Example_
    \code
    int ret;
    byte key[] = { // initialize with 24 byte key };
    byte iv[]  = { // initialize with 8 byte iv };

    byte cipher[]  = { // initialize with ciphertext };
    byte decoded[sizeof(cipher)];

    if ( wc_Des3_CbcDecryptWithKey(decoded, cipher, sizeof(cipher),
    key, iv) != 0) {
    	// error decrypting message
    }
    \endcode

    \sa wc_Des3_CbcDecrypt
*/
WOLFSSL_API int  wc_Des3_CbcDecryptWithKey(byte* out,
                                           const byte* in, word32 sz,
                                           const byte* key, const byte* iv);