Daniel Pouzzner
a3fb5029f8
clean up trailing whitespace and misplaced CRLFs, add missing final newlines, remove stray UTF8 nonprintables (BOMs) and ASCIIfy stray homoglyphs (spaces and apostrophes), guided by expanded coverage in wolfssl-multi-test check-source-text.
|
3 months ago | |
|---|---|---|
| .. | ||
| README_en.txt | 1 year ago | |
| README_jp.txt | 5 years ago | |
| t4_demo.mtpj | 6 years ago | |
| wolf_client.c | 5 months ago | |
| wolf_demo.h | 6 years ago | |
| wolf_main.c | 3 months ago | |
| wolf_server.c | 5 months ago | |
README_en.txt
wolfSSL/AlphaProject Boad demo setup Guide
This demo is tested with the following condition.
Renesas : CS+ v6.01, v8.01
Board : AP-RX71M-0A
wolfSSL : 3.15.3, 4.0.0
Setup process:
1. Download software
- Unzip AlphaProject firmware
- Unzip wolfssl under the same directory
2. Set up wolfSSL
- open wolfssl\IDE\Renesas\cs+\Projects\wolfssl\lib.mtpj with CS+ and build
- open t4_demo.mtpj and build. This create demo program library.
3. Set up AlphaProject
!!** When you use version 2.0 of a sample program, **!!
!!** please replace _ether_ to _usbfunc_ **!!
- The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\
ap_rx71m_0a_ether_sample_cs.mtpj
- Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\AP_RX71M_0A.c
insert wolfSSL_init() in echo_srv_init().
===
sci_init();
can_init();
echo_srv_init();
wolfSSL_init(); <- insert this line
===
!!** when you use version 2.0 **!!
===
CanInit();
SciInit();
EthernetAppInit();
UsbfInit();
wolfSSL_init(); <- insert this line
===
!!******************************!!
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\r_config
Line 120#pragma stacksize su=0x2000
Line 139 #define BSP_CFG_HEAP_BYTES (0xa000)
!!** when you use version 2.0 **!!
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_bsp_config.h
Line 154#pragma stacksize su=0x2000
Line 175#define BSP_CFG_HEAP_BYTES (0xa000)
!!******************************!!
- Modify IP address Sample\ap_rx71m_0a_ether_sample_cs\src\r_t4_rx\src\config_tcpudp.c
as needed
!!** when you use version 2.0 **!!
- Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\src\config_tcpudp.c
as needed
!!******************************!!
===
#define MY_IP_ADDR0 192,168,1,200 /* Local IP address */
#define GATEWAY_ADDR0 192,168,1,254 /* Gateway address (invalid if all 0s) */
#define SUBNET_MASK0 255,255,255,0
===
- Add project properties of linking library in ap_rx71m_0a_ether_sample_cs.mtpj
wolfssl\IDE\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
wolfssl\IDE\Renesas\cs+\Projects\t4_demo\DefaultBuild\t4_demo.lib
- Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.
- Build the project and start execute. You see message on the console prompting command.
===
wolfSSL Demo
t: test, b: benchmark, s: server, or c : client
$
===
Command can be executed only once. You need to reset and restart MPU for following command.
Command instruction:
t: Crypt algorithm test
b: benchmark
s: simple server acceptint at port 50000
c: simple client. Specify IP address and port as following.
c
4. Testing TLS Connection
You can use wolfssl/examples/server and client on your PC for TLS peer test.
PC side
$ ./examples/server/server -b -d
Board side
> c 11111
Board side
> s
PC side
$ ./examples/client/client -h -p 50000
---
If you have any question, please contact support@wolfssl.com.
wolfSSL Inc.
This demo is tested with the following condition.
Renesas : CS+ v6.01, v8.01
Board : AP-RX71M-0A
wolfSSL : 3.15.3, 4.0.0
Setup process:
1. Download software
- Unzip AlphaProject firmware
- Unzip wolfssl under the same directory
2. Set up wolfSSL
- open wolfssl\IDE\Renesas\cs+\Projects\wolfssl\lib.mtpj with CS+ and build
- open t4_demo.mtpj and build. This create demo program library.
3. Set up AlphaProject
!!** When you use version 2.0 of a sample program, **!!
!!** please replace _ether_ to _usbfunc_ **!!
- The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\
ap_rx71m_0a_ether_sample_cs.mtpj
- Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\AP_RX71M_0A.c
insert wolfSSL_init() in echo_srv_init().
===
sci_init();
can_init();
echo_srv_init();
wolfSSL_init(); <- insert this line
===
!!** when you use version 2.0 **!!
===
CanInit();
SciInit();
EthernetAppInit();
UsbfInit();
wolfSSL_init(); <- insert this line
===
!!******************************!!
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\r_config
Line 120#pragma stacksize su=0x2000
Line 139 #define BSP_CFG_HEAP_BYTES (0xa000)
!!** when you use version 2.0 **!!
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_bsp_config.h
Line 154#pragma stacksize su=0x2000
Line 175#define BSP_CFG_HEAP_BYTES (0xa000)
!!******************************!!
- Modify IP address Sample\ap_rx71m_0a_ether_sample_cs\src\r_t4_rx\src\config_tcpudp.c
as needed
!!** when you use version 2.0 **!!
- Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\src\config_tcpudp.c
as needed
!!******************************!!
===
#define MY_IP_ADDR0 192,168,1,200 /* Local IP address */
#define GATEWAY_ADDR0 192,168,1,254 /* Gateway address (invalid if all 0s) */
#define SUBNET_MASK0 255,255,255,0
===
- Add project properties of linking library in ap_rx71m_0a_ether_sample_cs.mtpj
wolfssl\IDE\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
wolfssl\IDE\Renesas\cs+\Projects\t4_demo\DefaultBuild\t4_demo.lib
- Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.
- Build the project and start execute. You see message on the console prompting command.
===
wolfSSL Demo
t: test, b: benchmark, s: server, or c : client
$
===
Command can be executed only once. You need to reset and restart MPU for following command.
Command instruction:
t: Crypt algorithm test
b: benchmark
s: simple server acceptint at port 50000
c: simple client. Specify IP address and port as following.
c
4. Testing TLS Connection
You can use wolfssl/examples/server and client on your PC for TLS peer test.
PC side
$ ./examples/server/server -b -d
Board side
> c 11111
Board side
> s
PC side
$ ./examples/client/client -h -p 50000
---
If you have any question, please contact support@wolfssl.com.
wolfSSL Inc.