2
0
Daniel Pouzzner aa18bbca55 assorted cleanups and refactors for C89 conformance, codespell and check-source-text, and consistent heap shim usage. 1 сар өмнө
..
README_en.txt 7223b5a708 Fix spelling warnings 1 жил өмнө
README_jp.txt aa18bbca55 assorted cleanups and refactors for C89 conformance, codespell and check-source-text, and consistent heap shim usage. 1 сар өмнө
t4_demo.mtpj 1d5c50cc63 Missing project file 6 жил өмнө
wolf_client.c 31a6a2bf59 update copyright to 2024 4 сар өмнө
wolf_demo.h f2ef67446d T4 demo 6 жил өмнө
wolf_main.c a3fb5029f8 clean up trailing whitespace and misplaced CRLFs, add missing final newlines, remove stray UTF8 nonprintables (BOMs) and ASCIIfy stray homoglyphs (spaces and apostrophes), guided by expanded coverage in wolfssl-multi-test check-source-text. 3 сар өмнө
wolf_server.c 31a6a2bf59 update copyright to 2024 4 сар өмнө

README_en.txt

wolfSSL/AlphaProject Boad demo setup Guide

This demo is tested with the following condition.

Renesas : CS+ v6.01, v8.01
Board : AP-RX71M-0A
wolfSSL : 3.15.3, 4.0.0

Setup process:
1. Download software
- Unzip AlphaProject firmware
- Unzip wolfssl under the same directory

2. Set up wolfSSL
- open wolfssl\IDE\Renesas\cs+\Projects\wolfssl\lib.mtpj with CS+ and build
- open t4_demo.mtpj and build. This create demo program library.

3. Set up AlphaProject

!!** When you use version 2.0 of a sample program, **!!
!!** please replace _ether_ to _usbfunc_ **!!

- The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\
ap_rx71m_0a_ether_sample_cs.mtpj
- Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\AP_RX71M_0A.c
insert wolfSSL_init() in echo_srv_init().

===
sci_init();
can_init();
echo_srv_init();
wolfSSL_init(); <- insert this line
===
!!** when you use version 2.0 **!!
===
CanInit();
SciInit();
EthernetAppInit();
UsbfInit();
wolfSSL_init(); <- insert this line
===
!!******************************!!

- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\r_config
Line 120#pragma stacksize su=0x2000
Line 139 #define BSP_CFG_HEAP_BYTES (0xa000)

!!** when you use version 2.0 **!!
- Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_usbfunc_sample_cs\src\smc_gen\r_bsp_config.h
Line 154#pragma stacksize su=0x2000
Line 175#define BSP_CFG_HEAP_BYTES (0xa000)
!!******************************!!

- Modify IP address Sample\ap_rx71m_0a_ether_sample_cs\src\r_t4_rx\src\config_tcpudp.c
as needed
!!** when you use version 2.0 **!!
- Modify IP address Sample\ap_rx71m_0a_usbfunc_sample_cs\src\tcp_sample\src\config_tcpudp.c
as needed
!!******************************!!

===
#define MY_IP_ADDR0 192,168,1,200 /* Local IP address */
#define GATEWAY_ADDR0 192,168,1,254 /* Gateway address (invalid if all 0s) */
#define SUBNET_MASK0 255,255,255,0
===

- Add project properties of linking library in ap_rx71m_0a_ether_sample_cs.mtpj

wolfssl\IDE\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
wolfssl\IDE\Renesas\cs+\Projects\t4_demo\DefaultBuild\t4_demo.lib

- Set CC-RX(Build Tool)->Library Geberation->Library Configuration to"C99" and enable ctype.h.

- Build the project and start execute. You see message on the console prompting command.

===
wolfSSL Demo
t: test, b: benchmark, s: server, or c : client
$
===

Command can be executed only once. You need to reset and restart MPU for following command.

Command instruction:
t: Crypt algorithm test
b: benchmark
s: simple server acceptint at port 50000
c: simple client. Specify IP address and port as following.
c


4. Testing TLS Connection
You can use wolfssl/examples/server and client on your PC for TLS peer test.


PC side
$ ./examples/server/server -b -d

Board side
> c 11111

Board side
> s

PC side
$ ./examples/client/client -h -p 50000

---
If you have any question, please contact support@wolfssl.com.

wolfSSL Inc.