Daniel Pouzzner
a3fb5029f8
clean up trailing whitespace and misplaced CRLFs, add missing final newlines, remove stray UTF8 nonprintables (BOMs) and ASCIIfy stray homoglyphs (spaces and apostrophes), guided by expanded coverage in wolfssl-multi-test check-source-text.
|
2 ماه پیش | |
|---|---|---|
| .. | ||
| Application | 2 ماه پیش | |
| README_wolfcrypt_test | 4 سال پیش | |
| wolfcrypt_test.ewd | 8 سال پیش | |
| wolfcrypt_test.ewp | 8 سال پیش | |
README_wolfcrypt_test
Steps taken to evaluate wolfSSL with the following:
Required Software for this guide:
IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
embOS v4.16 (for Cortex-M and IAR compiler)
wolfssl (latest version)
Required items (Hardware) for this guide:
Atmel SAM V71 Xplained Ultra (Or equivalent Cortex-M Evaluation Board)
Note: Must have J-Trace adapter (SWD or SWD + ETM)
j-Trace for ARM Cortex-M Processors
Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
Note: You can also purchase other models, we used one from IAR v3.2
20 pin target ribbon cable
USB Cable with j-Trace adapter end
Micro usb cable
#--!! NOTE !!--#
For this guide "**SAMV71_DIR" will signify the directory:
C:\\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
#----------------------------------------------------------------------------#
# Setup file system to evaluate wolfssl in embOS project:
# (If you have not already done so)
#----------------------------------------------------------------------------#
1. In wolfssl you will notice the directory:
wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here
2. go to embOS website and download a trial for your platform
https://www.segger.com/downloads/embos ->
embOS trial for Cortex-M and IAR compiler
3. Extract (unzip) the download to
C:\\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
(Note: you do not need to do anything further in this directory, the
wolfSSL evaluation projects will simply link against it)
#----------------------------------------------------------------------------#
# Evaluate wolfcrypt_tests in embOS project:
#----------------------------------------------------------------------------#
1. In IAR Workbench go to Project -> Add Existing Project
a. Browse to **SAMV71_DIR\embOS_wolfcrypt_test_SAMV71_XULT\
b. Choose wolfcrypt_test.ewp and click "Open"
2. Go to Project -> Rebuild All
3. Connect your SAMV71 Xplained Ultra to your PC with micro USB in the "Debug"
port for power and the J-Link hooked up to SWD pins and your PC
4. Go to Project -> Download and Debug
5. Once the "Debug" environment has loaded go to: View -> Terminal I/O
(This is where the printf's will be directed to)
6. Hit "Go" (Debug option with 3 right arrows "→→→")
7. You should observe the tests run and pass.
#----------------------------------------------------------------------------#
#----------------------------------------------------------------------------#
Thank you for using this guide and we hope this was helpful to you. If you have
any suggestions / feedback for us please contact us:
support@wolfssl.com
info@wolfssl.com
Copyright © 2016 wolfSSL Inc. All rights reserved.
Required Software for this guide:
IAR Embedded Workbench IDE - ARM v7.60.1 (or similar version)
embOS v4.16 (for Cortex-M and IAR compiler)
wolfssl (latest version)
Required items (Hardware) for this guide:
Atmel SAM V71 Xplained Ultra (Or equivalent Cortex-M Evaluation Board)
Note: Must have J-Trace adapter (SWD or SWD + ETM)
j-Trace for ARM Cortex-M Processors
Note: You can see here: https://www.segger.com/j-trace-for-cortex-m.html
Note: You can also purchase other models, we used one from IAR v3.2
20 pin target ribbon cable
USB Cable with j-Trace adapter end
Micro usb cable
#--!! NOTE !!--#
For this guide "**SAMV71_DIR" will signify the directory:
C:\\wolfssl\IDE\IAR-EWARM\embOS\SAMV71_XULT\
#----------------------------------------------------------------------------#
# Setup file system to evaluate wolfssl in embOS project:
# (If you have not already done so)
#----------------------------------------------------------------------------#
1. In wolfssl you will notice the directory:
wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here
2. go to embOS website and download a trial for your platform
https://www.segger.com/downloads/embos ->
embOS trial for Cortex-M and IAR compiler
3. Extract (unzip) the download to
C:\\wolfssl\IDE\IAR-EWARM\embOS\extract_trial_here\
(Note: you do not need to do anything further in this directory, the
wolfSSL evaluation projects will simply link against it)
#----------------------------------------------------------------------------#
# Evaluate wolfcrypt_tests in embOS project:
#----------------------------------------------------------------------------#
1. In IAR Workbench go to Project -> Add Existing Project
a. Browse to **SAMV71_DIR\embOS_wolfcrypt_test_SAMV71_XULT\
b. Choose wolfcrypt_test.ewp and click "Open"
2. Go to Project -> Rebuild All
3. Connect your SAMV71 Xplained Ultra to your PC with micro USB in the "Debug"
port for power and the J-Link hooked up to SWD pins and your PC
4. Go to Project -> Download and Debug
5. Once the "Debug" environment has loaded go to: View -> Terminal I/O
(This is where the printf's will be directed to)
6. Hit "Go" (Debug option with 3 right arrows "→→→")
7. You should observe the tests run and pass.
#----------------------------------------------------------------------------#
#----------------------------------------------------------------------------#
Thank you for using this guide and we hope this was helpful to you. If you have
any suggestions / feedback for us please contact us:
support@wolfssl.com
info@wolfssl.com
Copyright © 2016 wolfSSL Inc. All rights reserved.