Configuring cjdns

In this document we are going to go over how to configure cjdns and what exactly each setting means. Note that this is a living document and this software is still in the alpha stages so things are subject to change.

Let's start from the top of the file. First off you may notice it's JSON, except this JSON has comments. Technically that's not valid but it's also not uncommon. Cjdns strips out the comments before parsing it so no worries.

Your Keys and Address

The top part of the file specifies where the cjdns executable is, your encryption keys, and your cjdns IPv6 address.

{
    // The path to the cjdns core executable.
    "corePath": "/opt/cjdns/cjdns",

    // Private key:
    // Your confidentiality and data integrity depend on this key, keep it secret!
    "privateKey": "823e4EXAMPLEEXAMPLEEXAMPLEEXAMPLEEXAMPLEEXAMPLEEXAMPLEEXAMPLEc70",

    // This key corresponds to the public key and ipv6 address:
    "publicKey": "u2jf87mgqlxfzdnywp60z3tx6tkulvgh2nyc2jk1zc69zzt2s8u0.k",
    "ipv6": "fcff:a215:1e7b:a4e9:c00d:0813:93b3:7c87",

corePath: This specifies where the core cjdns executable file is. If you downloaded the source to /opt/cjdns, then the default is fine. If you downloaded it somewhere else, like your home directory for example, then this needs to be udpdated accordingly.
privateKey: Your private key is part of the system that ensures all the data coming and going out of your computer is encrypted. You must protect your private key. Do not give it out to anyone.
publicKey: The public key is what your computer gives to other computers to encrypt data with. This data can then only be decrypted with your private key, that way no one can access your information as it moves across the network.
ipv6: This is your IP address on the cjdns network. It is unique to you and is created by securely hashing your public key.

Incoming Connections

The authorizedPasswords section is the area where you can specify passwords to allow people to connect to you. Any system that presents a valid password will be allowed access. NOTE: These passwords should be long and random. There is no reason to make them short, easily remembered words because they are only going to be used by cjdns.

    // Anyone connecting and offering these passwords on connection will be allowed.
    //
    // WARNING: Currently there is no key derivation done on the password field,
    //          DO NOT USE A PASSWORD HERE use something which is truly random and
    //          cannot be guessed.
    // Including a username in the beginning of the password string is encouraged
    // to aid in remembering which users are who.
    //
    "authorizedPasswords":
    [
        // A unique string which is known to the client and server.
        {"password": "zxl6zgxpl4stnuybdt0xlg4tn2cdl5h"}

        // More passwords should look like this.
        // {"password": "10ru8br0mhk25ccpvubv0sqnl7kuc6s"},
        // {"password": "y68jm490dztxn3d2gvuv09bz55wqmjj"},
        // {"password": "bnpphnq205v8nf2ksrs1fknfr572xzc"},

        // These are your connection credentials
        // for people connecting to you with your default password.
        // adding more passwords for different users is advisable
        // so that leaks can be isolated.
        //
        // "your.external.ip.goes.here:33808":{"password":"zxl6zgxpl4stnuybdt0xlg4tn2cdl5h","publicKey":"u2jf87mgqlxfzdnywp60z3tx6tkulvgh2nyc2jk1zc69zzt2s8u0.k"}
    ],

password: This is the password that another system can give to your node and be allowed to connect. You would place it in the password section in the next part.
your.external.ip.goes.here:33808 This section is what you would give to a friend so that they could connect with you. We suggest you add a "name":"so-and-so" section to it as well (don't forget the comma between sections!) so that it is easy to see who you have allowed access to. If it later turns out that you no longer wish to have this user connect to you then it is a simple matter to find them and delete or comment out the correct line.

Admin Interface

The admin section defines the settings for the administrative interface of cjdns. Many of the scripts in /contrib/ use this to interact with cjdns. You probably wont need to use anything in there unless you are helping to test something out.

    // Settings for administering and extracting information from your router.
    // This interface provides functions which can be called through a TCP socket.
    "admin":
    {
        // Port to bind the admin RPC server to.
        "bind": "127.0.0.1:11234",

        // Password for admin RPC server.
        "password": "j6mukf2khplcgpbzz0kulb8hu0xq2v9"
    },

bind: This tells cjdns what IP and port the admin interface should bind to. Since you don't want random people connecting to your admin interface, it is probably fine to leave it like this.
password: This is the password that is needed in order to perform certain functions through the admin interface.

Connection Interface(s)

This specifies the settings for the connection interfaces to your node. Right now most people use the UDPInterface to connect to other cjdns peers over the internet or other traditional networks. You may also use ETHInterface to physically connect to another machine. Note that this is not a standard TCP/IP connection like you are used to.

    // Interfaces to connect to the switch core.
    "interfaces":
    {
        // The interface which connects over UDP/IP based VPN tunnel.
        "UDPInterface":
        [
            {
                // Bind to this port.
                "bind": "0.0.0.0:33808",

                // Nodes to connect to.
                "connectTo":
                {
                    // Add connection credentials here to join the network
                    // Ask somebody who is already connected.
                }
            }
        ]

        /*
        "ETHInterface":
        [
            {
                // Bind to this device (interface name, not MAC etc.)
                "bind": "eth0",

                // Auto-connect to other cjdns nodes on the same network.
                // Options:
                //
                // 0 -- Disabled.
                //
                // 1 -- Accept beacons, this will cause cjdns to accept incoming
                //      beacon messages and try connecting to the sender.
                //
                // 2 -- Accept and send beacons, this will cause cjdns to broadcast
                //      messages on the local network which contain a randomly
                //      generated per-session password, other nodes which have this
                //      set to 1 or 2 will hear the beacon messages and connect
                //      automatically.
                //
                "beacon": 2,

                // Node(s) to connect to manually.
                "connectTo":
                {
                    // Credentials for connecting look similar to UDP credientials
                    // except they begin with the mac address, for example:
                    // "01:02:03:04:05:06":{"password":"a","publicKey":"b"}
                }
            }
        ]
        */
    },

UDPInterface:
- bind: This tells cjdns what IP and port to use for listening to connections.
- connectTo: This is where you put the connection details for peers that you want to connect to. The format for this generally looks like this, "12.34.56.78:12345": { "password": "thisIsAnExampleOfAPassword", "publicKey": "z4s2EXAMPLEPUBLICKEYEXAMPLEPUBLICKEYEXAMPLEKEY4yjp0.k" }, It is important to note that while some people may put additional fields in such as node, only password and publicKey are actually read by cjdns.
ETHInterface:
- bind: This tells cjdns which device the ETHInterface should bind to. This may be different depending on your setup.
- connectTo: The connectTo for the ETHInterface functions almost exactly like it does for the the UDPInterface, except instead of an IP address and a port at the beginning, it is a MAC address.
- beacon: This controlls peer auto-discovery. Set to 0 to disable auto-peering, 1 to use broadcast auto-peering passwords contained in "beacon" messages from other nodes, and 2 to both broadcast and accept beacons.
- It is important to note that you must uncomment the ETHInterface if you want to use it

Router

This is where you configure routing settings of your cjdns node.

    // Configuration for the router.
    "router":
    {
        // The interface which is used for connecting to the cjdns network.
        "interface":
        {
            // The type of interface (only TUNInterface is supported for now)
            "type": "TUNInterface"

            // The name of a persistent TUN device to use.
            // This for starting cjdroute as its own user.
            // *MOST USERS DON'T NEED THIS*
            //"tunDevice": "tun0"
        },

type: This specifies the type of interface cjdns should use to connect to the network. Only TUNInterface is supported at the moment.
tunDevice: This specifies which TUN device cjdns should use to connect to the network. Most users do not need this.

IP Tunneling

IP Tunneling will allow you to connect from the cjdns network to another outside network. This is still a work in-progress; although it does function, it requires a bit of manual configuration on both ends to make it useful.

        // System for tunneling IPv4 and ICANN IPv6 through cjdns.
        // This is using the cjdns switch layer as a VPN carrier.
        "ipTunnel":
        {
            // Nodes allowed to connect to us.
            // When a node with the given public key connects, give them the
            // ip4 and/or ip6 addresses and prefix lengths listed.
            "allowedConnections":
            [
                // Give the client an address on 192.168.1.0/24, and an address
                // it thinks has all of IPv6 behind it.
                // {
                //     "publicKey": "f64hfl7c4uxt6krmhPutTheRealAddressOfANodeHere7kfm5m0.k",
                //     "ip4Address": "192.168.1.24",
                //     "ip4Prefix": 24,
                //     "ip6Address": "2001:123:ab::10",
                //     "ip6Prefix": 0
                // },

                // It's ok to only specify one address.
                // {
                //     "publicKey": "ydq8csdk8p8ThisIsJustAnExampleAddresstxuyqdf27hvn2z0.k",
                //     "ip4Address": "192.168.1.25",
                //     "ip4Prefix": 24
                // }
            ],

            "outgoingConnections":
            [
                // Connect to one or more machines and ask them for IP addresses.
                // "6743gf5tw80ExampleExampleExampleExamplevlyb23zfnuzv0.k",
                // "pw9tfmr8pcrExampleExampleExampleExample8rhg1pgwpwf80.k",
                // "g91lxyxhq0kExampleExampleExampleExample6t0mknuhw75l0.k"
            ]
        }
    },

allowedConnections:
outgoingConnections:

Miscellaneous

This section contains the security section for configuring program options and a few other miscellaneous things that don't fit in with a broader category elsewhere.

    // Tear down inactive CryptoAuth sessions after this number of seconds
    // to make them more forgiving in the event that they become desynchronized.
    "resetAfterInactivitySeconds": 100,

    // Save the pid of the running process to this file.
    // If this file cannot be opened for writing, the router will not start.
    //"pidFile": "cjdroute.pid",

    // Dropping permissions.
    "security":
    [
        // Set number of open files to zero, in Linux, this will succeed even if
        // files are already open and will not allow any files to be opened for the
        // duration of the program's operation.
        // Most security exploits require the use of files.
        "nofiles",

        // Change the user id to this user after starting up and getting resources.
        {"setuser": "nobody"}
     ],

    // Version of the config file, used internally for migration.
    "version": 1
}

configure.md 12 KB Historia Czysty