Troff User's Manual

Joseph F. Ossanna
Brian W. Kernighan


bwk@research.bell-labs.com

Introduction

Troff and nroff are text processors that format text for typesetter- and typewriter-like terminals, respectively. They accept lines of text interspersed with lines of format control information and format the text into a printable, paginated document having a user-designed style. Troff and nroff offer unusual freedom in document styling: arbitrary style headers and footers; arbitrary style footnotes; multiple automatic sequence numbering for paragraphs, sections, etc; multiple column output; dynamic font and point-size control; arbitrary horizontal and vertical local motions at any point; and a family of automatic overstriking, bracket construction, and line-drawing functions.

Troff produces its output in a device-independent form, although parameterized for a specific device; troff output must be processed by a driver for that device to produce printed output.

Troff and nroff are highly compatible with each other and it is almost always possible to prepare input acceptable to both. Conditional input is provided to enable the user to embed input expressly destined for either program. Nroff can prepare output directly for a variety of terminal types and is capable of utilizing the full resolution of each terminal. Nroff is the same program as troff; in fact, on Plan 9 nroff is a shell script that calls troff with the argument.

Background to the Plan 9 Edition

The primary change to troff and nroff for Plan 9 is support of the Unicode Standard, which was added during 1992 and 1993. There are two results. First, there is much less need for the myriad of two-character names that are so much a part of troff lore; in Plan 9, for example, one naturally uses the Unicode character ½ instead of troff's Second, the output device, though called is almost always a form of PostScript printer; the panoply of special drivers for different typesetters has largely disappeared. Unfortunately, not all PostScript printers can cope with Unicode characters, so there remains a need for programs that synthesize PostScript characters from bitmaps; this is especially true for Asian languages.

Background to the Second Edition

Troff was originally written by the late Joe Ossanna in about 1973, in assembly language for the PDP-11, to drive the Graphic Systems CAT typesetter. It was rewritten in C around 1975, and underwent slow but steady evolution until Ossanna's death late in 1977.

In 1979, Brian Kernighan modified troff so that it would produce output for a variety of typesetters, while retaining its input specifications. Over the decade from 1979 to 1989, the internals have been modestly revised, though much of the code remains as it was when Ossanna wrote it.

Troff reads parameter files each time it is invoked, to set values for machine resolution, legal type sizes and fonts, and character names, character widths and the like. Troff output is ASCII characters in a simple language that describes where each character is to be placed and in what size and font. A post-processor must be written for each device to convert this typesetter-independent language into specific instructions for that device.

The output language contains information that was not readily identifiable in the older output. In the newer language, the beginning of each page, line, and word is marked, so post-processors can do device-specific optimizations such as sorting the data vertically or printing it boustrophedonically, independent of troff.

Capabilities for graphics have been added: troff recognizes commands for drawing diagonal lines, circles, ellipses, circular arcs, and quadratic B-splines. There are also ways to pass arbitrary information to the output, unprocessed by troff.

A number of limitations have been eased or eliminated. A document may have an arbitrary number of fonts on any page (if the output device permits it, of course). Fonts may be accessed merely by naming them; ``mounting'' is no longer necessary. There are no limits on the number of characters. Character height and slant may be set independently of width.

The remainder of this document contains a description of usage and command-line options; a summary of requests, escape sequences, and pre-defined number registers; a reference manual; tutorial examples; and a list of commonly-available characters.

Acknowledgements

Joe Ossanna's troff remains a remarkable accomplishment. For more than twenty years, it has proven a robust tool, taking unbelievable abuse from a variety of preprocessors and being forced into uses that were never conceived of in the original design, all with considerable grace under fire.

Recent versions of troff have profited from significant code improvements by Jaap Akkerhuis, Dennis Ritchie, Ken Thompson, and Molly Wagner. UTF facilities owe much to Jaap Akkerhuis. Andrew Hume, Doug McIlroy, Peter Nelson and Ravi Sethi made valuable suggestions on the manual. I fear that the remaining bugs are my fault.






Usage

Troff or nroff is invoked as

troff  options  files
nroff  options  files
where options represents any of a number of option arguments and files represents the list of files containing the document to be formatted. An argument consisting of a single minus represents standard input. If no filenames are given input is taken from the standard input. The options, which may appear in any order so long as they appear before the files, are:

Each option is a separate argument; for example,

troff -Tutf -ms -mpictures -o4,6,8-10 file1 file2
requests formatting of pages 4, 6, and 8 through 10 of a document contained in the files named file1 and file2, specifies the output in UTF, and invokes the macro packages and

Various pre- and post-processors are available for use with nroff and troff. These include the equation preprocessor eqn (for troff only), the table-construction preprocessor tbl, and pic and grap for various forms of graphics.






Request Summary

In the following table, the notation ±N in the column means that the forms N, +N, or -N are permitted, to set the parameter to N, increment it by N, or decrement it by N, respectively. Plain N means that the value is used to set the parameter. separated by are for troff and nroff respectively. In the column,






ab	20
ad	4
af	8
am	7
as	7
bd	2
bp	3
br	4
c2	10
cc	10
ce	4
cf	19
ch	7
cs	2
cu	10
da	7
de	7
di	7
ds	7
dt	7
ec	10
el	16
em	7
eo	10
ev	17
ex	18
fc	9
fi	4
fl	20
fp	2
ft	2
hc	13
hw	13
hy	13
ie	16
if	16
ig	20
in	6
it	7
lc	9
lg	10
lf	20
ll	6
ls	5
lt	14
mc	20
mk	3
na	4
ne	3
nf	4
nh	13
nm	15
nn	15
nr	8
ns	5
nx	19
os	5
pc	14
pi	19
pl	3
pm	20
pn	3
po	3
ps	2
rd	18
rm	7
rn	7
rr	8
rs	5
rt	3
so	19
sp	5
ss	2
sv	5
sy	19
ta	9
tc	9
ti	6
tl	14
tm	20
tr	10
uf	10
ul	10
vs	5
wh	7




Alphabetical Request and Section Number Cross Reference












Escape Sequences for Characters, Indicators, and Functions





The escape sequences and are interpreted in copy mode (§7.2).






Predefined Number Registers





Predefined Read-Only Number Registers










Reference Manual

1 General Explanation



0.0s. Form of input. Input consists of text lines, which are destined to be printed, interspersed with control lines, which set parameters or otherwise control subsequent processing. Control lines begin with a control character­ normally . (period) or ' (single quote)­ followed by a one or two character name that specifies a basic request or the substitution of a user-defined macro in place of the control line. The control character ' suppresses the break function­ the forced output of a partially filled line­ caused by certain requests. The control character may be separated from the request/macro name by white space (spaces and/or tabs) for aesthetic reasons. Names should be followed by either space or newline. Control lines with unrecognized names are ignored.

Various special functions may be introduced anywhere in the input by means of an escape character, normally \. For example, the function causes the interpolation of the contents of the number register R in place of the function; here R is either a single character name as in \nx, or a two-character name introduced by a left-parenthesis, as in \n(xx.



0.0s. Formatter and device resolution. Troff internally stores and processes dimensions in units that correspond to the particular device for which output is being prepared; values from 300 to 1200/inch are typical. See §23. Nroff internally uses 240 units/inch, corresponding to the least common multiple of the horizontal and vertical resolutions of various typewriter-like output devices. Troff rounds horizontal/vertical numerical parameter input to the actual horizontal/vertical resolution of the output device indicated by the -T option (default Nroff similarly rounds numerical input to the actual resolution of its output device (default Model 37 Teletype).

0.0s. Numerical parameter input. Both nroff and troff accept numerical input with the appended scale indicators shown in the following table, where S is the current type size in points and V is the current vertical line spacing in basic units.

In nroff, both the em and the en are taken to be equal to the nominal character width, which is output-device dependent; common values are 1/10 and 1/12 inch. Actual character widths in nroff need not be all the same and constructed characters such as -> (->) are often extra wide. The default scaling is for the horizontally-oriented requests and functions and horizontal coordinates of for the vertically-oriented requests and functions and vertical coordinates of for the request; and for the requests and All other requests ignore any scale indicators. When a number register containing an already appropriately scaled number is interpolated to provide numerical input, the unit scale indicator u may need to be appended to prevent an additional inappropriate default scaling. The number, N, may be specified in decimal-fraction form but the parameter finally stored is rounded to an integer number of basic units. Internal computations are performed in integer arithmetic.

The absolute position indicator | may be prefixed to a number N to generate the distance to the vertical or horizontal place N. For vertically-oriented requests and functions, |N becomes the distance in basic units from the current vertical place on the page or in a diversion (§7.4) to the vertical place N. For all other requests and functions, |N becomes the distance from the current horizontal place on the input line to the horizontal place N. For example,

.sp |3.2c
will space in the required direction to 3.2 centimeters from the top of the page.



0.0s. Numerical expressions. Wherever numerical input is expected, an expression involving parentheses, the arithmetic operators +, -, /, *, % (mod), and the logical operators <, >, <=, >=, = (or ==), & (and), : (or) may be used. Except where controlled by parentheses, evaluation of expressions is left-to-right; there is no operator precedence. In the case of certain requests, an initial + or - is stripped and interpreted as an increment or decrement indicator respectively. In the presence of default scaling, the desired scale indicator must be attached to every number in an expression for which the desired and default scaling differ. For example, if the number register x contains 2 and the current point size is 10, then
.ll (4.25i+\nxP+3)/2u
will set the line length to 1/2 the sum of 4.25 inches + 2 picas + 3 ems.

0.0s. Notation. Numerical parameters are indicated in this manual in two ways. ±N means that the argument may take the forms N, +N, or -N and that the corresponding effect is to set the parameter to N, to increment it by N, or to decrement it by N respectively. Plain N means that an initial algebraic sign is not an increment indicator, but merely the sign of N. Generally, unreasonable numerical input is either ignored or truncated to a reasonable value. For example, most requests expect to set parameters to non-negative values; exceptions are and The requests and restore the previous parameter value in the absence of an argument.

Single character arguments are indicated by single lower case letters and one/two character arguments are indicated by a pair of lower case letters. Character string arguments are indicated by multi-character mnemonics.

2 Font and Character Size Control



0.0s. Character set. The troff character set is defined by a description file specific to each output device (§23). There are normally several regular fonts and one or more special fonts. Characters are input as themselves, as ¿TT>xx, as C'name', or as The form permits a name of any length; the form refers to the n-th character on the current font, whether named or not.

Normally the input characters and are printed as `, ', and - respectively; and produce `, ', and -. If the character does not exist in the font, troff assumes the width is 1 em and outputs the character with a name as defined in Section 22. (This is independent of how the device handles characters unknown to it.)

Nroff has an analogous, but different, mechanism for defining legal characters and how to print them. By default all characters are valid. There are such additional characters as may be available on the output device, such characters as may be constructed by overstriking or other combination, and those that can reasonably be mapped into other printable characters. The exact behavior is determined by a driving table prepared for each device.



0.0s. Fonts. Troff begins execution by reading information for a set of defaults fonts, said to be mounted; conventionally, the first four are Times Roman (R), Times Italic (I), Times Bold (B), and Times Bold Italic (BI) , and the last is a Special font containing miscellaneous characters. (This document uses Lucida Sans in place of Times.) The set of fonts and positions is determined by the device description file, described in §23.

The current font, initially Roman, may be changed by the ft request, or by embedding at any desired point /TT>x, TT>xx, or /TT>N, where x and xx are the name of a font and N is a numerical font position.

It is not necessary to change to the Special font; characters on that font are automatically handled as if they were physically part of the current font. The Special font may actually be several fonts; the name is reserved and is generally used for one of these. All special fonts must be mounted after regular fonts.

Troff can be informed that any particular font is mounted by use of the fp request. The list of known fonts is installation dependent. In the subsequent discussion of font-related requests, F represents either a one/two-character font name or the numerical font position. The current font is available (as a numerical position) in the read-only number register .f.

A request for a named but not-mounted font is honored if the font description information exists. In this way, there is no limit on the number of fonts that may be printed in any part of a document. Mounted fonts may be handled more efficiently, and they may be referred to by their mount positions, but there is no other difference. Mention of an unmounted font loads it temporarily at font position zero, which serves as a one-font cache.

The function causes the current font to be slanted by ±N degrees. Not all devices support slanting.

Nroff understands font control and normally underlines italic characters (see §10.5).



0.0s. Character size. Character point sizes available depend on the specific output device; a typical (historical) set of values is 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 22, 24, 28, and 36. This is a range of 1/12 inch to 1/2 inch. The ps request is used to change or restore the point size. Alternatively the point size may be changed between any two characters by embedding a at the desired point to set the size to N, or a
(1<=N<=9) to increment/decrement the size by N; restores the previous size. Requested point size values that are between two valid sizes yield the larger of the two.

Note that through an accident of history, a construction like is parsed as size 39, and thus converted to size 36 (given the sizes above), while is parsed as size 4 followed by The forms nn and ±(nn permit specification of sizes that would otherwise be ambiguous.

The current size is available in the .s register. Nroff ignores type size requests.

The function sets the height of the current font to N, or increments it by +N, or decrements it by -N; if N=0, the height is restored to the current point size. In each case, the width is unchanged. Not all devices support independent height and width for characters.

NOTE: *The fields have the same meaning as described earlier in the Request Summary.



Request Initial If No
Form Value Argument Notes

.ps ±N* 10point previous E
Point size set to ±N. Alternatively, embed or Any positive size value may be requested; if invalid, the next larger valid size will result, with a maximum of 36. A paired sequence +N, -N will work because the previous requested value is also remembered. Ignored in nroff.


.ss N 12/36em ignored E
Space-character size (i.e., inter-word gap) is set to N/36 ems. This size is the minimum word spacing in adjusted text. Ignored in nroff.


.csFNM off - P
Constant character space (width) mode is set on for font F (if mounted); the width of every character will be taken to be N/36 ems. If M is absent, the em is that of the character's point size; if M is given, the em is M points. All affected characters are centered in this space, including those with an actual width larger than this space. Special Font characters occurring while the current font is F are also so treated. If N is absent, the mode is turned off. The mode must be in effect when the characters are physically printed. Ignored in nroff.


.bd F N off - P
The characters in font F will be artificially emboldened by printing each one twice, separated by N-1 basic units. A reasonable value for N is 3 when the character size is near 10 points. If N is missing the embolden mode is turned off. The emboldening value N is in the .b register.
This paragraph is printed with .bd R 3. The mode must be in effect when the characters are physically printed. Ignored in nroff.


.bd S F N off - P
The characters in the Special font will be emboldened whenever the current font is F. The mode must be in effect when the characters are physically printed. Ignored in nroff.


.ft F Roman previous E
Font changed to F. Alternatively, embed The font name P is reserved to mean the previous font, and the name for the special font.


.fp N F L R,I,B,...,S ignored -
Font position. This is a statement that a font named F is associated with position N. It is a fatal error if F is not known. For fonts with names longer than two characters, L refers to the long name, and F becomes a synonym. There is generally a limit of about 10 mounted fonts.

3 Page control

Top and bottom margins are not automatically provided; it is conventional to define two macros and to set traps for them at vertical positions 0 (top) and -N (distance N up from the bottom). See §7 and Tutorial Examples §T2. A pseudo-page transition onto the first page occurs either when the first break occurs or when the first non-diverted text processing occurs. Arrangements for a trap to occur at the top of the first page must be completed before this transition. In the following, references to the current diversion (§7.4) mean that the mechanism being described works during both ordinary and diverted output (the former considered as the top diversion level).

The limitations on troff and nroff output dimensions are device dependent.



.pl ±N 11in 11in v
Page length set to ±N. The current page length is available in the .p register.


.bp ±N N=1 - B,v
Begin page. The current page is ejected and a new page is begun. If ±N is given, the new page number will be ±N. Also see request ns.


.pn ±N N=1 ignored -
Page number. The next page (when it occurs) will have the page number ±N. A pn must occur before the initial pseudo-page transition to affect the page number of the first page. The current page number is in the % register.


.po ±N 1in; 0 previous v
Page offset. The current left margin is set to ±N. The troff initial value provides 1 inch of paper margin on a typical device. The current page offset is available in the .o register.


.ne N - N=1V D,v
Need N vertical space. If the distance D to the next trap position (see §7.5) is less than N, a forward vertical space of size D occurs, which will spring the trap. If there are no remaining traps on the page, D is the distance to the bottom of the page. If D<V, another line could still be output and spring the trap. In a diversion, D is the distance to the diversion trap, if any, or is very large.


.mk R none internal D
Mark the current vertical place in an internal register (both associated with the current diversion level), or in register R, if given. See rt request.


.rt ±N none internal D,v
Return upward only to a marked vertical place in the current diversion. If ±N (with respect to current place) is given, the place is ±N from the top of the page or diversion or, if N is absent, to a place marked by a previous mk. The sp request (§5.3) may be used instead of rt by spacing to the absolute place stored in a explicit register, e.g., using R ... this also works when the motion is downwards.

4 Text Filling, Adjusting, and Centering



0.0s. Filling and adjusting. Normally, words are collected from input text lines and assembled into a output text line until some word does not fit. An attempt is then made to hyphenate the word to put part of it into the output line. The spaces between the words on the output line are then increased to spread out the line to the current line length minus any current indent. A word is any string of characters delimited by the space character or the beginning/end of the input line. Any adjacent pair of words that must be kept together (neither split across output lines nor spread apart in the adjustment process) can be tied together by separating them with the unpaddable space character ``\ '' (backslash-space). The adjusted word spacings are uniform in troff and the minimum interword spacing can be controlled with the ss request (§2). In nroff, they are normally nonuniform because of quantization to character-size spaces; however, the command line option -e causes uniform spacing with full output device resolution. Filling, adjustment, and hyphenation (§13) can all be prevented or controlled. The text length on the last line output is available in the .n register, and text baseline position on the page for this line is in the nl register. The text baseline high-water mark (lowest place) on the current page is in the .h register. The current horizontal output position is in the .k register.

An input text line ending with ., ?, or !, optionally followed by any number of or ¿, is taken to be the end of a sentence, and an additional space character is automatically provided during filling. To prevent this, add to the end of the input line. Multiple inter-word space characters found in the input are retained, except for trailing spaces; initial spaces also cause a break.

When filling is in effect, a \p may be embedded or attached to a word to cause a break at the end of the word and have the resulting output line spread out to fill the current line length.

A text input line that happens to begin with a control character can be made not to look like a control line by prefixing it with the non-printing, zero-width filler character \&. Still another way is to specify output translation of some convenient character into the control character using tr (§10.5).



0.0s. Interrupted text. The copying of a input line in nofill(non-fill) mode can be interrupted by terminating the partial line with a \c. The next encountered input text line will be considered to be a continuation of the same line of input text. Similarly, a word within filled text may be interrupted by terminating the word (and line) with \c; the next encountered text will be taken as a continuation of the interrupted word. If the intervening control lines cause a break, any partial line will be forced out along with any partial word.

.br - - B
Break. The filling of the line currently being collected is stopped and the line is output without adjustment. Text lines beginning with space characters (but not tabs) and empty text lines (blank lines) also cause a break.


.fi fill on - B,E
Fill subsequent output lines. The register .u is 1 in fill mode and 0 in nofill mode.


.nf fill on - B,E
Nofill. Subsequent output lines are neither filled nor adjusted. Input text lines are copied directly to output lines without regard for the current line length.


.ad c adj, both adjust E
Line adjustment is begun. If fill mode is not on, adjustment will be deferred until fill mode is back on. If the type indicator c is present, the adjustment type is changed as shown in the following table.

The number register contains the current value of the setting; its value can be recorded and used subsequently to set adjustment.


.na adjust - E
Noadjust. Adjustment is turned off; the right margin will be ragged. The adjustment type for ad is not changed. Output line filling still occurs if fill mode is on.


.ce N off N=1 B,E
Center the next N input text lines within the current available horizontal space (line-length minus indent). If N=0, any residual count is cleared. A break occurs after each of the N input lines. If the input line is too long, it will be left adjusted.

5 Vertical Spacing



0.0s. Baseline spacing. The vertical spacing (V) between the baselines of successive output lines can be set using the vs request. V should be large enough to accommodate the character sizes on the affected output lines. For the common type sizes (9-12 points), usual typesetting practice is to set V to 2 points greater than the point size; troff default is 10-point type on a 12-point spacing (as in this document). The current V is available in the .v register. Multiple-V line separation (e.g., double spacing) may be requested with ls, but it is better to use a large instead; certain preprocessors assume single spacing. The current line spacing is available in the .L register.

0.0s. Extra line-space. If a word contains a tall construct requiring the output line containing it to have extra vertical space before and/or after it, the extra-line-space function \x'N' can be embedded in or attached to that word. If N is negative, the output line containing the word will be preceded by N extra vertical space; if N is positive, the output line containing the word will be followed by N extra vertical space. If successive requests for extra space apply to the same line, the maximum values are used. The most recently utilized post-line extra line-space is available in the .a register.

In and other functions having a pair of delimiters around their parameter, the delimiter choice (here is arbitrary, except that it can not look like the continuation of a number expression for N.



0.0s. Blocks of vertical space. A block of vertical space is ordinarily requested using sp, which honors the no-space mode and which does not space past a trap. A contiguous block of vertical space may be reserved using sv.

.vs N 12pts; 1/6in previous E,p
Set vertical baseline spacing size V. Transient extra vertical space is available with \x'N' (see above).


.ls N N=1 previous E
Line spacing set to ±N. N-1 Vs (blank lines) are appended to each output text line. Appended blank lines are omitted, if the text or previous appended blank line reached a trap position.


.sp N - N=1 V B,v
Space vertically in either direction. If N is negative, the motion is backward (upward) and is limited to the distance to the top of the page. Forward (downward) motion is truncated to the distance to the nearest trap. (Recall the use of from §1.3.) If the no-space mode is on, no spacing occurs (see ns and rs below).


.sv N - N=1 V v
Save a contiguous vertical block of size N. If the distance to the next trap is greater than N, N vertical space is output. No-space mode has no effect. If this distance is less than N, no vertical space is immediately output, but N is remembered for later output (see os). Subsequent sv requests will overwrite any still remembered N.


.os - - -
Output saved vertical space. No-space mode has no effect. Used to finally output a block of vertical space requested by an earlier sv request.


.ns space - D
No-space mode turned on. When on, no-space mode inhibits sp requests and bp requests without a next page number. No-space mode is turned off when a line of output occurs, or with rs.


.rs space - D
Restore spacing. The no-space mode is turned off.


Blank text line. - B
Causes a break and output of a blank line exactly like sp 1.

6 Line Length and Indenting

The maximum line length for fill mode may be set with ll. The indent may be set with in; an indent applicable to only the next output line may be set with ti. The line length includes indent space but not page offset space. The line length minus the indent is the basis for centering with ce. The effect of ll, in, or ti is delayed, if a partially collected line exists, until after that line is output. In fill mode the length of text on an output line is less than or equal to the line length minus the indent. The current line length and indent are available in registers .l and .i respectively. The length of three-part titles produced by tl (see §14) is independently set by lt.



.ll ±N 6.5in previous E,m
Line length is set to ±N.


.in ±N N=0 previous B,E,m
Indent is set to ±N. The indent is prefixed to each output line.


.ti ±N - ignored B,E,m
Temporary indent. The next output text line will be indented a distance ±N with respect to the current indent. The resulting total indent may not be negative. The current indent is not changed.

7 Macros, Strings, Diversion, and Position Traps



0.0s. Macros and strings. A macro is a named set of arbitrary lines that may be invoked by name or with a trap. A string is a named string of characters, not including a newline character, that may be interpolated by name at any point. Request, macro, and string names share the same name list. Macro and string names may be one or two characters long and may usurp previously defined request, macro, or string names; this implies that built-in operations may be (irrevocably) redefined. Any of these entities may be renamed with rn or removed with rm.

Macros are created by de and di, and appended to by am and da; di and da cause normal output to be stored in a macro. A macro is invoked in the same way as a request; a control line beginning .xx will interpolate the contents of macro xx. The remainder of the line may contain up to nine arguments.

Strings are created by ds and appended to by as. The strings x and xx are interpolated at any desired point with \*x and \*(xx respectively. String references and macro invocations may be nested.



0.0s. Copy mode input interpretation. During the definition and extension of strings and macros (not by diversion) the input is read in copy mode. In copy mode, input is copied without interpretation except that:
^* The contents of number registers indicated by \n are interpolated.
^* Strings indicated by \* are interpolated.
^* Arguments indicated by \$ are interpolated.
^* Concealed newlines indicated by \newline are eliminated.
^* Comments indicated by \" are eliminated.
^* \t and \a are interpreted as ASCII horizontal tab and SOH respectively (§9).
^* \\ is interpreted as \.
^* \. is interpreted as ``.''.


These interpretations can be suppressed by prefixing a \. For example, since \\ maps into a \, \\n will copy as \n, which will be interpreted as a number register indicator when the macro or string is reread.

0.0s. Arguments. When a macro is invoked by name, the remainder of the line is taken to contain up to nine arguments. The argument separator is the space character (not tab), and arguments may be surrounded by double quotes to permit embedded space characters. Pairs of double quotes may be embedded in double-quoted arguments to represent a single double-quote character. The argument is explicitly null. If the desired arguments won't fit on a line, a concealed newline may be used to continue on the next line. A trailing double quote may be omitted.

When a macro is invoked the input level is pushed down and any arguments available at the previous level become unavailable until the macro is completely read and the previous level is restored. A macro's own arguments can be interpolated at any point within the macro with which interpolates the Nth argument (1<=N<=9). If an invoked argument does not exist, a null string results. For example, the macro xx may be defined by

&de xx	\" begin definition
Today is \\$1 the \\$2.
&.	\" end definition
and called by
&xx Monday 14th
to produce the text
Today is Monday the 14th.
Note that each \$ was concealed in the definition with a prefixed \. The number of arguments is in the .$ register.

No arguments are available at the top (non-macro) level, within a string, or within a trap-invoked macro.

Arguments are copied in copy mode onto a stack where they are available for reference. It is advisable to conceal string references (with an extra \) to delay interpolation until argument reference time.



0.0s. Diversions. Processed output may be diverted into a macro for purposes such as footnote processing (see Tutorial §T5) or determining the horizontal and vertical size of some text for conditional changing of pages or columns. A single diversion trap may be set at a specified vertical position. The number registers dn and dl respectively contain the vertical and horizontal size of the most recently ended diversion. Processed text that is diverted into a macro retains the vertical size of each of its lines when reread in nofill mode regardless of the current V. Constant-spaced (cs) or emboldened (bd) text that is diverted can be reread correctly only if these modes are again or still in effect at reread time. One way to do this is to embed in the diversion the appropriate cs or bd requests with the transparent mechanism described in §10.6.

Diversions may be nested and certain parameters and registers are associated with the current diversion level (the top non-diversion level may be thought of as the 0th diversion level). These are the diversion trap and associated macro, no-space mode, the internally-saved marked place (see mk and rt), the current vertical place (.d register), the current high-water text baseline (.h register), and the current diversion name (.z register).



0.0s. Traps. Three types of trap mechanisms are available­page traps, a diversion trap, and an input-line-count trap. Macro-invocation traps may be planted using wh at any page position including the top. This trap position may be changed using ch. Trap positions at or below the bottom of the page have no effect unless or until moved to within the page or rendered effective by an increase in page length. Two traps may be planted at the same position only by first planting them at different positions and then moving one of the traps; the first planted trap will conceal the second unless and until the first one is moved (see Tutorial Examples). If the first one is moved back, it again conceals the second trap. The macro associated with a page trap is automatically invoked when a line of text is output whose vertical size reaches or sweeps past the trap position. Reaching the bottom of a page springs the top-of-page trap, if any, provided there is a next page. The distance to the next trap position is available in the .t register; if there are no traps between the current position and the bottom of the page, the distance returned is the distance to the page bottom.

A macro-invocation trap effective in the current diversion may be planted using dt. The .t register works in a diversion; if there is no subsequent trap a large distance is returned. For a description of input-line-count traps, see it below.



&de xx yy - .yy=.. -
Define or redefine the macro xx. The contents of the macro begin on the next input line. Input lines are copied in copy mode until the definition is terminated by a line beginning with .yy, whereupon the macro yy is called. In the absence of yy, the definition is terminated by a line beginning with ``..''. A macro may contain de requests provided the terminating macros differ or the contained definition terminator is concealed. ``..'' can be concealed as \\.. which will copy as \.. and be reread as ``..''.


&am xx yy - .yy=.. -
Append to macro xx (append version of de).


&ds xx string - ignored -
Define a string xx containing string. Any initial double quote in string is stripped off to permit initial blanks.


&as xx string - ignored -
Append string to string xx (append version of ds).


&rm xx - ignored -
Remove request, macro, or string. The name xx is removed from the name list and any related storage space is freed. Subsequent references will have no effect. If many macros and strings are being created dynamically, it may become necessary to remove unused ones to recapture internal storage space for newer registers.


&rn xx yy - ignored -
Rename request, macro, or string xx to yy. If yy exists, it is first removed.


&di xx - end D
Divert output to macro xx. Normal text processing occurs during diversion except that page offsetting is not done. The diversion ends when the request di or da is encountered without an argument; extraneous requests of this type should not appear when nested diversions are being used.


&da xx - end D
Divert, appending to macro xx (append version of di).


&wh N xx - - v
Install a trap to invoke xx at page position N; a negative N will be interpreted as a distance from the page bottom. Any macro previously planted at N is replaced by xx. A zero N refers to the top of a page. In the absence of xx, the first trap found at N, if any, is removed.


&ch xx N - - v
Change the trap position for macro xx to be N. In the absence of N, the trap, if any, is removed.


&dt N xx - off D,v
Install a diversion trap at position N in the current diversion to invoke macro xx. Another dt will redefine the diversion trap. If no arguments are given, the diversion trap is removed.


&it N xx - off E
Set an input-line-count trap to invoke the macro xx after N lines of text input have been read (control or request lines do not count). The text may be inline text or text interpolated by inline or trap-invoked macros.


&em xx none none -
The macro xx will be invoked when all input has ended. The effect is almost as if the contents of xx had been at the end of the last file processed, but all processing ceases at the next page eject.

8 Number Registers

A variety of parameters are available to the user as predefined number registers (see Summary, page 0u+7u). In addition, users may define their own registers. Register names are one or two characters long and do not conflict with request, macro, or string names. Except for certain predefined read-only registers, a number register can be read, written, automatically incremented or decremented, and interpolated into the input in a variety of formats. One common use of user-defined registers is to automatically number sections, paragraphs, lines, etc. A number register may be used any time numerical input is expected or desired and may be used in numerical expressions (§1.4).

Number registers are created and modified using nr, which specifies the name, numerical value, and the auto-increment size. Registers are also modified, if accessed with an auto-incrementing sequence. If the registers x and xx both contain N and have the auto-increment size M, the following access sequences have the effect shown:

When interpolated, a number register is converted to decimal (default), decimal with leading zeros, lower-case Roman, upper-case Roman, lower-case sequential alphabetic, or upper-case sequential alphabetic according to the format specified by af.



&nr R ±N M - u
The number register R is assigned the value ±N with respect to the previous value, if any. The increment for auto-incrementing is set to M.


&af R c arabic - -
Assign format c to register R. The available formats are:

An arabic format having N digits specifies a field width of N digits (example 2 above). The read-only registers and the width function (§11.2) are always arabic. Warning: the value of a number register in a non-Arabic format is not numeric, and will not produce the expected results in expressions.
The function or returns the format of a number register in a form suitable for it returns nothing if the register has not been used.


&rr R - ignored -
Remove number register R. If many registers are being created dynamically, it may become necessary to remove unused registers to recapture internal storage space for newer registers. The register contains the number of number registers still available.

9 Tabs, Leaders, and Fields



0.0s. Tabs and leaders. The ASCII horizontal tab character and the ASCII SOH (control-A, hereafter called the leader character) can both be used to generate either horizontal motion or a string of repeated characters. The length of the generated entity is governed by internal tab stops specifiable with ta. The default difference is that tabs generate motion and leaders generate a string of periods; tc and lc offer the choice of repeated character or motion. There are three types of internal tab stops­ left adjusting, right adjusting, and centering. In the following table, D is the distance from the current position on the input line (where a tab or leader was found) to the next tab stop, next-string consists of the input characters following the tab (or leader) up to the next tab (or leader) or end of line, and W is the width of next-string.

The length of generated motion is allowed to be negative, but that of a repeated character string cannot be. Repeated character strings contain an integer number of characters, and any residual distance is prepended as motion. Tabs or leaders found after the last tab stop are ignored, but may be used as next-string terminators.

Tabs and leaders are not interpreted in copy mode. \t and \a always generate a non-interpreted tab and leader respectively, and are equivalent to actual tabs and leaders in copy mode.



0.0s. Fields. A field is contained between a pair of field delimiter characters, and consists of substrings separated by padding indicator characters. The field length is the distance on the input line from the position where the field begins to the next tab stop. The difference between the total length of all the substrings and the field length is incorporated as horizontal padding space that is divided among the indicated padding places. The incorporated padding is allowed to be negative. For example, if the field delimiter is # and the padding indicator is ^, #^xxx^right# specifies a right-adjusted string with the string xxx centered in the remaining space.

&ta Nt ... 0.8; 0.5in none E,m
Set tab stops and types. t=R, right adjusting; t=C, centering; t absent, left adjusting. Troff tab stops are preset every 0.5in., nroff every 0.8in. The stop values are separated by spaces, and a value preceded by + is treated as an increment to the previous stop value.


&tc c none none E
The tab repetition character becomes c, or is removed, thus specifying motion.


&lc c . none E
The leader repetition character becomes c, or is removed, thus specifying motion.


&fc a b off off -
The field delimiter is set to a; the padding indicator is set to the space character or to b, if given. In the absence of arguments the field mechanism is turned off.

10 Input and Output Conventions and Character Translations



0.0s. Input character translations. Ways of inputting the valid character set were discussed in §2.1. The ASCII control characters horizontal tab (§9.1), SOH (§9.1), and backspace (§10.3) are discussed elsewhere. The newline delimits input lines. In addition, STX, ETX, ENQ, ACK, and BEL are accepted, and may be used as delimiters or translated into a graphic with tr (§10.5). All others are ignored.

The escape character \ introduces escape sequences, which cause the following character to mean another character, or to indicate some function. A complete list of such sequences is given in the Summary on page 0u+7u. The escape character \ should not be confused with the ASCII control character ESC. The escape character \ can be input with the sequence \\. The escape character can be changed with ec, and all that has been said about the default \ becomes true for the new escape character. \e can be used to print whatever the current escape character is. The escape mechanism may be turned off with eo, and restored with ec.



&ec c -
Set escape character to , or to c, if given.


&eo on - -
Turn escape mechanism off.


0.0s. Ligatures. The set of available ligatures is device and font dependent, but is often a subset of fi, fl, ff, ffi, and ffl. They may be input by \(fi, \(fl, \(ff, \(Fi, and \(Fl respectively. The ligature mode is normally on in troff, and automatically invokes ligatures during input.

&lg N on; off on -
Ligature mode is turned on if N is absent or non-zero, and turned off if N=0. If N=2, only the two-character ligatures are automatically invoked. Ligature mode is inhibited for request, macro, string, register, or file names, and in copy mode. No effect in nroff.


0.0s. Backspacing, underlining, overstriking, etc. Unless in copy mode, the ASCII backspace character is replaced by a backward horizontal motion having the width of the space character. Underlining as a form of line-drawing is discussed in §12.4. A generalized overstriking function is described in §12.1.

Nroff automatically underlines characters in the underline font, specifiable with uf, normally that on font position 2. In addition to ft and the underline font may be selected by ul and cu. Underlining is restricted to an output-device-dependent subset of reasonable characters.



&ul N off N=1 E
Italicize in troff (underline in nroff) the next N input text lines. Actually, switch to underline font, saving the current font for later restoration; other font changes within the span of a ul will take effect, but the restoration will undo the last change. Output generated by tl (§14) is affected by the font change, but does not decrement N. If N>1, there is the risk that a trap interpolated macro may provide text lines within the span; environment switching can prevent this.


&cu N off N=1 E
Continuous underline. A variant of ul that causes every character to be underlined in nroff. Identical to ul in troff.


&uf F Italic Italic -
Underline font set to F. In nroff, F may not be on position 1.


0.0s. Control characters. Both the control character . and the no-break control character ' may be changed. Such a change must be compatible with the design of any macros used in the span of the change, and particularly of any trap-invoked macros.

&cc c . . E
The basic control character is set to c, or reset to ``.''.


&c2 c ' ' E
The no-break control character is set to c, or reset to ``'''.


0.0s. Output translation. One character can be made a stand-in for another character using tr. All text processing (e.g., character comparisons) takes place with the input (stand-in) character, which appears to have the width of the final character. The graphic translation occurs at the moment of output (including diversion).

&tr abcd.... none - O
Translate a into b, c into d, etc. If an odd number of characters is given, the last one will be mapped into the space character. To be consistent, a particular translation must stay in effect from input to output time.


0.0s. Transparent throughput. An input line beginning with a \! is read in copy mode and transparently output (without the initial \!); the text processor is otherwise unaware of the line's presence. This mechanism may be used to pass control information to a post-processor or to embed control lines in a macro created by a diversion.

0.0s. Transparent output The sequence copies anything to the output, as a device control function of the form anything (§22). Escape sequences in anything are processed.

0.0s. Comments and concealed newlines. An uncomfortably long input line that must stay one line (e.g., a string definition, or nofilled text) can be split into several physical lines by ending all but the last one with the escape \. The sequence newline is always ignored, except in a comment. Comments may be embedded at the end of any line by prefacing them with \". The newline at the end of a comment cannot be concealed. A line beginning with \" will appear as a blank line and behave like a comment can be on a line by itself by beginning the line with .\".

11 Local Horizontal and Vertical Motions, and the Width Function



0.0s. Local Motions. The functions \v'N' and \h'N' can be used for local vertical and horizontal motion respectively. The distance N may be negative; the positive directions are rightward and downward. A local motion is one contained within a line. To avoid unexpected vertical dislocations, it is necessary that the net vertical local motion within a word in filled text and otherwise within a line balance to zero. The escape sequences providing local motion are summarized in the following table.

As an example, E^2 could be generated by a sequence of size changes and motions: E\s-2\v'-0.4m'2\v'0.4m'\s+2; note that the 0.4 em vertical motions are at the smaller size.

0.0s. Width Function. The width function \w'string' generates the numerical width of string (in basic units). Size and font changes may be embedded in string, and will not affect the current environment. For example, .ti -\w'\fB1. 'u could be used to temporarily indent leftward a distance equal to the size of the string ``1. '' in font

The width function also sets three number registers. The registers st and sb are set respectively to the highest and lowest extent of string relative to the baseline; then, for example, the total height of the string is \n(stu-\n(sbu. In troff the number register ct is set to a value between 0 and 3. The value 0 means that all of the characters in string were short lower case characters without descenders (like e); 1 means that at least one character has a descender (like y); 2 means that at least one character is tall (like H); and 3 means that both tall characters and characters with descenders are present.



0.0s. Mark horizontal place. The function \kx causes the current horizontal position in the input line to be stored in register x. For example, the construction \kxword\h'|\nxu+3u'word will embolden word by backing up to almost its beginning and overprinting it, resulting in wordh'|0u+3u'word.

12 Overstrike, Bracket, Line-drawing, Graphics, and Zero-width Functions



0.0s. Overstriking. Automatically centered overstriking of up to nine characters is provided by the overstrike function \o'string'. The characters in string are overprinted with centers aligned; the total width is that of the widest character. string may not contain local vertical motion. As examples, \o'e\'' produces o'e'', and \o'\(mo\(sl' produces o'C/'.

0.0s. Zero-width characters. The function will output c without spacing over it, and can be used to produce left-aligned overstruck combinations. As examples, \z¤+ will produce z¤+, and \(br\z\(rn\(ul\(br will produce a small badly constructed box |z _|.

0.0s. Large Brackets. The Special Font usually contains a number of bracket construction pieces (())||||||| that can be combined into various bracket styles. The function \b'string' may be used to pile up vertically the characters in string (the first character on top and the last at the bottom); the characters are vertically separated by 1 em and the total pile is centered 1/2 em above the current baseline (½ line in nroff). For example,
\b'\(lc\(lf'E\b'\(rc\(rf'\x'-0.5m'\x'0.5m'
produces x'-.5m'x'.5m'b'||'Eb'||'.

0.0s. Line drawing. The function
(backslash-ell) draws a string of repeated c's towards the right for a distance N. If c looks like a continuation of an expression for N, it may be insulated from N with . If c is not specified, the _ (baseline rule) is used (underline character in nroff). If N is negative, a backward horizontal motion of size N is made before drawing the string. Any space resulting from N/(size of c) having a remainder is put at the beginning (left end) of the string. If N is less than the width of c, a single c is centered on a distance N. In the case of characters that are designed to be connected, such as baseline-rule _, under-rule _, and root-en , the remainder space is covered by overlapping. As an example, a macro to underscore a string can be written
&de us
\\$1\l'|0\(ul'
&&
or one to draw a box around a string
&de bx
\(br\|\\$1\|\(br\l'|0\(rn'\l'|0\(ul'
&&
such that
&ul "underlined words"
and
&bx "words in a box"
yield underlined words
and |words in a box|

h'-w'.'u'.

The function \L'Nc' draws a vertical line consisting of the (optional) character c stacked vertically apart 1em (1 line in nroff), with the first two characters overlapped, if necessary, to form a continuous line. The default character is the box rule | (\(br); the other suitable character is the bold vertical | (\(bv). The line is begun without any initial motion relative to the current baseline. A positive N specifies a line drawn downward and a negative N specifies a line drawn upward. After the line is drawn no compensating motions are made; the instantaneous baseline is at the end of the line.

The horizontal and vertical line drawing functions may be used in combination to produce large boxes. The zero-width box-rule and the ½-em wide under-rule were designed to form corners when using 1-em vertical spacings. For example the macro

.de eb
.sp -1	\"compensate for next automatic baseline spacing
.nf	\"avoid possibly overflowing word buffer
\h'-.5n'\L'|\\nau-1'\l'\\n(.lu+1n\(ul'\L'-|\\nau+1'\l'|0u-.5n\(ul'
.fi
..
will draw a box around some text whose beginning vertical place was saved in number register a (e.g., using .mk a) as was done for this paragraph.

h'-.5n'L'|0+1u-1'
L'-|0+1u+1'



0.0s. Graphics. The function draws a graphic object of type c according to a sequence of parameters, which are generally pairs of numbers.
D'l dh dv'	draw line from current position by dh, dv
D'c d'	draw circle of diameter d with left side at current position
D'e d1d2'	draw ellipse of diameters d1 and d2
D'a dh1 dv1 dh2 dv2'	draw arc from current position to dh1+dh2, dv1+dv2,
	   with center at dh1, dv1 from current position
D'~ dh1dv1dh2dv2...'	draw B-spline from current position by dh1,dv1,
	   then by dh2,dv2, then by dh2,dv2, then ...


For example, draws the ellipse D'e.2i .1i', and the line D'l.2i -.1i'D'l.1i .1i'. A with an unknown c is processed and copied through to the output for unspecified interpretation; coordinates are interpreted alternately as horizontal and vertical values.

Numbers taken as horizontal (first, third, etc.) have default scaling of ems; vertical numbers (second, fourth, etc.) have default scaling of Vs (§1.3). The position after a graphical object has been drawn is at its end; for circles and ellipses, the ``end'' is at the right side.

13 Hyphenation.

Automatic hyphenation may be switched off and on. When switched on with hy, several variants may be set. A hyphenation indicator character may be embedded in a word to specify desired hyphenation points, or may be prefixed to suppress hyphenation. In addition, the user may specify a small list of exception words.

Only words that consist of a central alphabetic string surrounded by (usually null) non-alphabetic strings are candidates for automatic hyphenation. Words that contain hyphens (minus), em-dashes (\(em), or hyphenation indicator characters are always subject to splitting after those characters, whether automatic hyphenation is on or off.



&nh hyphenate - E
Automatic hyphenation is turned off.


&hy N on, N=1 on, N=1 E
Automatic hyphenation is turned on for N>=1, or off for N=0. If N=2, last lines (ones that will cause a trap) are not hyphenated. For N=4 and 8, the last and first two characters respectively of a word are not split off. These values are additive; i.e., N=14 will invoke all three restrictions.


&hc c E
Hyphenation indicator character is set to c or to the default . The indicator does not appear in the output.


&hw word ... ignored -
Specify hyphenation points in words with embedded minus signs. Versions of a word with terminal s are implied; i.e., implies This list is examined initially and after each suffix stripping. The space available is small.

14 Three-Part Titles.

The titling function tl provides for automatic placement of three fields at the left, center, and right of a line with a title length specifiable with lt. tl may be used anywhere, and is independent of the normal text collecting process. A common use is in header and footer macros.



&tl 'left'center'right' - -
The strings left, center, and right are respectively left-adjusted, centered, and right-adjusted in the current title length. Any of the strings may be empty, and overlapping is permitted. If the page-number character (initially %) is found within any of the fields it is replaced by the current page number in the format assigned to register %. Any character may be used in place of as the string delimiter.


&pc c % off -
The page number character is set to c, or removed. The page number register remains %.


< ±N 6.5in previous E,m
Length of title is set to ±N. The line length and the title length are independent. Indents do not apply to titles; page offsets do.

15 Output Line Numbering.

Automatic sequence numbering of output lines may be requested with nm. When in effect, a three-digit, arabic number plus a digit-space is prefixed to output text lines. The text lines are thus offset by four digit-spaces, and otherwise retain their line length; a reduction in line length may be desired to keep the right margin aligned with an earlier margin. Blank lines, other vertical spaces, and lines generated by tl are not numbered. Numbering can be temporarily suspended with nn, or with an .nm followed by a later .nm +0. In addition, a line number indent I, and the number-text separation S may be specified in digit-spaces. Further, it can be specified that only those line numbers that are multiples of some number M are to be printed (the others will appear as blank number fields).



&nm ±N M S I off E
Line number mode. If ±N is given, line numbering is turned on, and the next output line numbered is numbered ±N. Default values are M=1, S=1, and I=0. Parameters corresponding to missing arguments are unaffected; a non-numeric argument is considered missing. In the absence of all arguments, numbering is turned off; the next line number is preserved for possible further use in number register ln.


&nn N - N=1 E
The next N text output lines are not numbered.

As an example, the paragraph portions of this section are numbered with M=3: .nm 1 3 was placed at the beginning; .nm was placed at the end of the first paragraph; and .nm +0 was placed in front of this paragraph; and .nm finally placed at the end. Line lengths were also changed (by \w'0000'u) to keep the right side aligned. Another example is which turns on numbering with the line number of the next line to be 5 greater than the last numbered line, with M=5, with spacing S untouched, and with the indent I set to 3.

16 Conditional Acceptance of Input

In the following, c is a one-character built-in condition name, ! signifies not, N is a numerical expression, string1 and string2 are strings delimited by any non-blank, non-numeric character not in the strings, and anything represents what is conditionally accepted.



&if c anything - -
If condition c true, accept anything as input; in multi-line case use \{anything\}.


&if !c anything - -
If condition c false, accept anything.


&if N anything - u
If expression N > 0, accept anything.


&if !N anything - u
If expression N <= 0 [sic], accept anything.


&if 'string1'string2' anything -
If string1 identical to string2, accept anything.


&if !'string1'string2' anything -
If string1 not identical to string2, accept anything.


&ie c anything - u
If portion of if-else; all of the forms for if above are valid.


&el anything - -
Else portion of if-else.

The built-in condition names are:

If the condition c is true, or if the number N is greater than zero, or if the strings compare identically (including motions and character size and font), anything is accepted as input. If a ! precedes the condition, number, or string comparison, the sense of the acceptance is reversed.

Any spaces between the condition and the beginning of anything are skipped over. The anything can be either a single input line (text, macro, or whatever) or a number of input lines. In the multi-line case, the first line must begin with a left delimiter \{ and the last line must end with a right delimiter \}.

The request ie (if-else) is identical to if except that the acceptance state is remembered. A subsequent and matching el (else) request then uses the reverse sense of that state. ie-el pairs may be nested.

Some examples are:

&if e .tl 'Even Page %'''
which outputs a title if the page number is even; and
&ie \n%>1 \{\
'	sp 0.5i
&	tl 'Page %'''
'	sp |1.2i \}
&el .sp |2.5i
which treats page 1 differently from other pages.

17 Environment Switching.

A number of the parameters that control the text processing are gathered together into an environment, which can be switched by the user. The environment parameters are those associated with requests noting E in their Notes column; in addition, partially collected lines and words are in the environment. Everything else is global; examples are page-oriented parameters, diversion-oriented parameters, number registers, and macro and string definitions. All environments are initialized with default parameter values.



&ev N N=0 previous -
Environment switched to environment 0<=N<=2. Switching is done in push-down fashion so that restoring a previous environment must be done with .ev rather than specific reference. Note that what is pushed down and restored is the environment number, not its contents.

18 Insertions from the Standard Input

The input can be temporarily switched to the system standard input with rd, which will switch back when two consecutive newlines are found (the extra blank line is not used). This mechanism is intended for insertions in form-letter-like documentation. The standard input can be the user's keyboard, a pipe, or a file.



&rd prompt - prompt=BEL" -"
Read insertion from the standard input until two newlines in a row are found. If the standard input is the user's keyboard, prompt (or a BEL) is written onto the standard output. rd behaves like a macro, and arguments may be placed after prompt.


&ex - - -
Exit from nroff/troff. Text processing is terminated exactly as if all input had ended.

If insertions are to be taken from the terminal keyboard while output is being printed on the terminal, the command line option -q will turn off the echoing of keyboard input and prompt only with BEL. The regular input and insertion input cannot simultaneously come from the standard input.

As an example, multiple copies of a form letter may be prepared by entering the insertions for all the copies in one file to be used as the standard input, and causing the file containing the letter to reinvoke itself with nx (§19); the process would ultimately be ended by an ex in the insertion file.

19 Input/Output File Switching



&so filename - -
Switch source file. The top input (file reading) level is switched to filename. When the new file ends, input is again taken from the original file. so's may be nested.


&nx filename end-of-file -
Next file is filename. The current file is considered ended, and the input is immediately switched to filename.


&sy string - -
Execute program from string, which is the rest of the input line. The output is not collected automatically. The number register which contains the process id of the troff process, may be useful in generating unique filenames for output.


&pi string - -
Pipe output to string, which is the rest of the input line. This request must occur before any printing occurs; typically it is the first line of input.


&cf filename - -
Copy contents of file filename to output, completely unprocessed. The file is assumed to contain something meaningful to subsequent processes.

20 Miscellaneous
that a margin character c appear a distance N to the right of the right margin after each non-empty text line (except those produced by tl). If the output line is too long (as can happen in nofill mode) the character will be appended to the line. If N is not given, the previous N is used; the initial N is 0.2 inches in nroff and 1 em in troff. The margin character used with this paragraph was a 12-point box-rule.



.tm string - newline -
After skipping initial blanks, string (rest of the line) is read in copy mode and written on the standard error.


&ab string - newline -
After skipping initial blanks, string (rest of the line) is read in copy mode and written on the standard error. Troff or nroff then exit.


.ig yy - .yy=.. -
Ignore input lines. ig behaves exactly like de (§7) except that the input is discarded. The input is read in copy mode, and any auto-incremented registers will be affected.


.lf N filename - -
Set line number to N and filename to filename for purposes of subsequent error messages, etc. The number register [sic] contains the name of the current input file, as set by command line argument, or The number register contains the number of input lines read from the current file, again perhaps as modified by


.pm t - all -
Print macros. The names and sizes of all of the defined macros and strings are printed on the standard error; if t is given, only the total of the sizes is printed. The sizes is given in blocks of 128 characters.


.fl - - B
Flush output buffer. Force output, including any pending position information.

21 Output and Error Messages.

The output from tm, pm, and the prompt from rd, as well as various error messages, are written onto the standard error. The latter is different from the standard output, where formatted text goes. By default, both are written onto the user's terminal, but they can be independently redirected.

Various error conditions may occur during the operation of nroff and troff. Certain less serious errors having only local impact do not cause processing to terminate. Two examples are word overflow, caused by a word that is too large to fit into the word buffer (in fill mode), and line overflow, caused by an output line that grew too large to fit in the line buffer. In both cases, a message is printed, the offending excess is discarded, and the affected word or line is marked at the point of truncation with a * in nroff and a <= in troff. Processing continues if possible, on the grounds that output useful for debugging may be produced. If a serious error occurs, processing terminates, and a message is printed, along with a list of the macro names currently active. Examples of serious errors include the inability to create, read, or write files, and the exceeding of certain internal limits that make future output unlikely to be useful.

22 Output Language

Troff produces its output in a language that is independent of any specific output device, except that the numbers in it have been computed on the basis of the resolution of the device, and the sizes, fonts, and characters that that device can print. Nevertheless it is quite possible to interpret that output on a different device, within the latter's capabilities.

sn	set point size to n
fn	set font to n
cc	print character c
Cname	print the character called name; terminate name by white space
Nn	print character n on current font
Hn	go to absolute horizontal position n (n>=0)
Vn	go to absolute vertical position n (n>=0, down is positive)
hn	go n units horizontally; n<0 is to the left
vn	go n units vertically; n<0 is up
nnc	move right nn, then print UTF character c;  nn must be exactly 2 digits
pn	new page n begins­set vertical position to 0
nb a	end of line (information only­no action);  b = space before line, a = after
w	paddable word space (information only­no action)
Dc ...0graphics function c; see below
x ...0device control functions; see below
# ...0comment


All position values are in units. Sequences that end in digits must be followed by a non-digit. Blanks, tabs and newlines may occur as separators in the input, and are mandatory to separate constructions that would otherwise be confused. Graphics functions, device control functions, and comments extend to the end of the line they occur on.

The device control and graphics commands are intended as open-ended families, to be expanded as needed. The graphics functions coincide directly with the sequences:

Dl dh dv	draw line from current position by dh, dv
Dc d	draw circle of diameter d with left side here
De dh1 dv2	draw ellipse of diameters dh1 and dv2
Da dh1 dv1 dh2 dv2	draw arc from current position to dh1+dh2, dv1+dv2,
		   center at dh1, dv1 from current position
D~ dh1 dv1 dh2 dv2 ...	draw B-spline from current position to dh1, dv1,
		   then to dh2, dv2, then to ...
Dz dh1 dv1 dh2 dv2 ...	for any other z is uninterpreted


In all of these, dh, dv is an increment on the current horizontal and vertical position, with down and right positive. All distances and dimensions are in units.

The device control functions begin with then a command, then other parameters.

x T s	name of typesetter is s
x r n h v	resolution is n units/inch;
		h = minimum horizontal motion, v = minimum vertical
x i	initialize
x f n s	mount font s on font position n
x p	pause­can restart
x s	stop­done forever
x t	generate trailer information, if any
x H n	set character height to n
x S n	set slant to n
x X any	generated by the \X function
x any	to be ignored if not recognized


Subcommands like may be spelled out like

The commands and must occur first; fonts must be mounted before they can be used; comes last. There are no other order requirements.

The following is the output from for a typical printer, as described in §23:

x T utf
x res 720 1 1
x init
V0
p1
x font 1 R
x font 2 I
x font 3 B
x font 4 BI
x font 5 CW
x font 6 H
x font 7 HB
x font 8 HX
x font 9 S1
x font 10 S
s10
f1
H0
s10
f1
V0
H720
V120
ch
50e44l28l28o50,w58w72o50r33l28dn120 0
x trailer
V7920
x stop

Troff output is normally not redundant; size and font changes and position information are not included unless needed. Nevertheless, each page is self-contained, for the benefit of postprocessors that re-order pages or process only a subset.

23 Device and Font Description Files

The parameters that describe a output device name are read from the directory each time troff is invoked. The device name is provided by default, by the environment variable or by a command-line argument The default device name is for UTFencoded Unicode characters. The pre-defined string contains the name of the device. The command-line option may be used to change the default directory.



0.0s. Device description file. General parameters of the device are stored, one per line, in the file as a sequence of names and values. Troff recognizes these parameters, and ignores any others that may be present for specific drivers:
fonts n F1 F2 ... Fn
sizes s1 s2 ...0
res n
hor n
vert n
unitwidth n
charset
list of multi-character character names (optional)


The Fi are font names to be initially mounted. The list of sizes is a set of integers representing some or all of the legal sizes the device can produce, terminated by a zero. The parameter gives the resolution of the machine in units per inch; and give the minimum number of units that can be moved horizontally and vertically.

Character widths for each font are assumed to be given in machine units at point size (In other words, a character with a width of n is n units wide at size All widths are integers at all sizes.

A list of valid character names may be introduced by the list of names is optional.

A line whose first non-blank character is is a comment. Except that must occur last, parameters may appear in any order.

Here is a subset of the file for a typical Postscript printer:

# Description file for Postscript printers.

fonts 10 R I B BI CW H HB HX S1 S
sizes 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
   24 25 26 27 28 29 30 31 32 33 34 35 36 38 40 44 48 54 60 72 0
res 720
hor 1
vert 1
unitwidth 10
charset
hy ct fi fl ff Fi Fl dg em 14 34 12 en aa
ga ru sc dd -> br Sl ps cs cy as os =. ld
rd le ge pp -+ ob vr
sq bx ci fa te ** pl mi eq ~= *A *B *X *D
*E *F *G *Y *I *K *L *M *N *O *P *R *H *S *T *U *W
*C *Q *Z ul rn *a *b *x *d *e *f *g *y *i *k
*l *m *n *o *p *h *r *s *t *u *w *c *q *z



0.0s. Font description files. Each font is described by an analogous description file, which begins with parameters of the font, one per line, followed by a list of characters and widths. The file for font f is
name str	name of font is str
ligatures . . . 0	list of ligatures
spacewidth n	width of a space on this font
special	this is a special font
charset
list of character name, width, ascender/descender, code, tab separated


The and fields are mandatory; must be last. Comments are permitted, as are other unrecognized parameters.

Each line following describes one character: its name, its width in units as described above, ascender/descender information, and a decimal, octal or hexadecimal value by which the output device knows it (the ``number'' of the character). The character name is arbitrary, except that signifies an unnamed character. If the width field contains the name is a synonym for the previous character. The ascender/descender field is 1 if the character has a descender (hangs below the baseline, like is 2 if it has an ascender (is tall, like is 3 if both, and is 0 if neither. The value is returned in the register, as computed by the function (§11.2).

Here are excerpts from a typical font description file for the same Postscript printer.

hy	33	0	45	hyphen \(hy
-	"			- is a synonym for \(hy


Q 72 3 81

a 44 0 97 b 50 2 98 c 44 0 99 d 50 2 100 y 50 1 121

em 100 0 208 --- 44 2 220 Pound symbol £, \N'220' --- 36 0 221 centered dot \N'221'
This says, for example, that the width of the letter is 44 units at point size 10, the value of Point sizes are scaled linearly and rounded, so the width of will be 44 at size 10, 40 at size 9, 35 at size 8, and so on.






Tutorial Examples







Introduction

It is almost always necessary to prepare at least a small set of macro definitions to describe a document. Such common formatting needs as page margins and footnotes are deliberately not built into nroff and troff. Instead, the macro and string definition, number register, diversion, environment switching, page-position trap, and conditional input mechanisms provide the basis for user-defined implementations.

For most uses, a standard package like or is the right choice. The next stage is to augment that, or to selectively replace macros from the standard package. The last stage, much harder, is to write one's own from scratch. This is not a task for the novice.

The examples discussed here are intended to be useful and somewhat realistic, but will not necessarily cover all relevant contingencies. Explicit numerical parameters are used in the examples to make them easier to read and to illustrate typical values. In many cases, number registers would be used to reduce the number of places where numerical information is kept, and to concentrate conditional parameter initialization like that which depends on whether troff or nroff is being used.

Page Margins

As discussed in §3, header and footer macros are usually defined to describe the top and bottom page margin areas respectively. A trap is planted at page position 0 for the header, and at -N (N from the page bottom) for the footer. The simplest such definitions might be

&de hd	\"define header
'sp 1i
&&	\"end definition
&de fo	\"define footer
'bp
&&	\"end definition
&wh 0 hd
&wh -1i fo
which provide blank 1 inch top and bottom margins. The header will occur on the first page only if the definition and trap exist prior to the initial pseudo-page transition (§3). In fill mode, the output line that springs the footer trap was typically forced out because some part or whole word didn't fit on it. If anything in the footer and header that follows causes a break, that word or part word will be forced out. In this and other examples, requests like bp and sp that normally cause breaks are invoked using the no-break control character ' to avoid this. When the header/footer design contains material requiring independent text processing, the environment may be switched, avoiding most interaction with the running text.

A more realistic example would be

&de hd	\"header
&if \\n%>1 \{\
'sp ~0.5i-1	\"tl base at 0.5i
&tl ''- % -''	\"centered page number
&ps	\"restore size
&ft	\"restore font
&vs  \}	\"restore vs
'sp ~1.0i  	\"space to 1.0i
&ns	\"turn on no-space mode
&&
&de fo	\"footer
&ps 10	\"set footer/header size
&ft R	\"set font
&vs 12p	\"set baseline spacing
&if \\n%=1 \{\
'sp ~\\n(.pu-0.5i-1  \"tl base 0.5i up
&tl ''- % -'' \}  \"first page number
'bp
&&
&wh 0 hd
&wh -1i fo
which sets the size, font, and baseline spacing for the header/footer material, and ultimately restores them. The material in this case is a page number at the bottom of the first page and at the top of the remaining pages. The sp's refer to absolute positions to avoid dependence on the baseline spacing. Another reason for doing this in the footer is that the footer is invoked by printing a line whose vertical spacing swept past the trap position by possibly as much as the baseline spacing. No-space mode is turned on at the end of hd to render ineffective accidental occurrences of sp at the top of the running text.

This method of restoring size, font, etc., presupposes that such requests (that set previous value) are not used in the running text. A better scheme is to save and restore both the current and previous values as shown for size in the following:

&de fo
&nr s1 \\n(.s	\"current size
&ps
&nr s2 \\n(.s	\"previous size
&  ---	\"rest of footer
&&
&de hd
&  ---	\"header stuff
&ps \\n(s2  \"restore previous size
&ps \\n(s1  \"restore current size
&&
Page numbers may be printed in the bottom margin by a separate macro triggered during the footer's page ejection:
&de bn	\"bottom number
&tl ''- % -''	\"centered page number
&&
&wh -0.5i-1v bn	 \"tl base 0.5i up

Paragraphs and Headings

The housekeeping associated with starting a new paragraph should be collected in a paragraph macro that, for example, does the desired preparagraph spacing, forces the correct font, size, baseline spacing, and indent, checks that enough space remains for more than one line, and requests a temporary indent.

&de pg    \"paragraph
&br       \"break
&ft R     \"force font,
&ps 10    \"size,
&vs 12p   \"spacing,
&in 0     \"and indent
&sp 0.4   \"prespace
&ne 1+\\n(.Vu  \"want more than 1 line
&ti 0.2i         \"temp indent
&&
The first break in pg will force out any previous partial lines, and must occur before the vs. The forcing of font, etc., is partly a defense against prior error and partly to permit things like section heading macros to set parameters only once. The prespacing parameter is suitable for troff; a larger space, at least as big as the output device vertical resolution, would be more suitable in nroff. The choice of remaining space to test for in the ne is the smallest amount greater than one line (the .V is the available vertical resolution).

A macro to automatically number section headings might look like:

&de sc	\"section
&  ---	\"force font, etc.
&sp 0.4	\"prespace
&ne 2.4+\\n(.Vu \"want 2.4+ lines
&fi
\\n+S.
&&
&nr S 0 1	\"init S
The usage is .sc, followed by the section heading text, followed by .pg. The ne test value includes one line of heading, 0.4 line in the following pg, and one line of the paragraph text. A word consisting of the next section number and a period is produced to begin the heading line. The format of the number may be set by af (§8).

Another common form is the labeled, indented paragraph, where the label protrudes left into the indent space.

&de lp	\"labeled paragraph
&pg
&in 0.5i	\"paragraph indent
&ta 0.2i 0.5i	\"label, paragraph
&ti 0
\t\\$1\t\c	\"flow into paragraph
&&
The intended usage is ``.lp label''; label will begin at 0.2 inch, and cannot exceed a length of 0.3 inch without intruding into the paragraph. The label could be right adjusted against 0.4 inch by setting the tabs instead with .ta|0.4iR|0.5i. The last line of lp ends with \c so that it will become a part of the first line of the text that follows.

Multiple Column Output

The production of multiple column pages requires the footer macro to decide whether it was invoked by other than the last column, so that it will begin a new column rather than produce the bottom margin. The header can initialize a column register that the footer will increment and test. The following is arranged for two columns, but is easily modified for more.

&de hd	\"header
&  ---
&nr cl 0 1	\"init column count
&mk	\"mark top of text
&&
&de fo	\"footer
&ie \\n+(cl<2 \{\
&po +3.4i	\"next column; 3.1+0.3
&rt	\"back to mark
&ns \}	\"no-space mode
&el \{\
&po \\nMu	\"restore left margin
&  ---
'bp \}
&&
&ll 3.1i	\"column width
&nr M \\n(.o	\"save left margin
Typically a portion of the top of the first page contains full width text; the request for the narrower line length, as well as another .mk would be made where the two column output was to begin.

Footnotes

The footnote mechanism to be described is used by embedding the footnotes in the input text at the point of reference, demarcated by an initial .fn and a terminal .ef:

&fn
Footnote text and control lines...
&ef
In the following, footnotes are processed in a separate environment and diverted for later printing in the space immediately prior to the bottom margin. There is provision for the case where the last collected footnote doesn't completely fit in the available space.
&de hd	\"header
&  ---
&nr x 0 1	\"init footnote count
&nr y 0-\\nb	\"current footer place
&ch fo -\\nbu	\"reset footer trap
&if \\n(dn .fz	\"leftover footnote
&&
&de fo	\"footer
&nr dn 0  \"zero last diversion size
&if \\nx \{\
&ev 1	\"expand footnotes in ev1
&nf	\"retain vertical size
&FN	\"footnotes
&rm FN	\"delete it
&if "\\n(.z"fy" .di  \"end overflow di
&nr x 0	\"disable fx
&ev  \}	\"pop environment
&  ---
'bp
&&
&de fx	\"process footnote overflow
&if \\nx .di fy	\"divert overflow
&&
&de fn	\"start footnote
&da FN	\"divert (append) footnote
&ev 1	\"in environment 1
&if \\n+x=1 .fs   \"if 1st, separator
&fi	\"fill mode
&&
&de ef	\"end footnote
&br	\"finish output
&nr z \\n(.v	\"save spacing
&ev	\"pop ev
&di	\"end diversion
&nr y -\\n(dn	\"new footer position,
&if \\nx=1 .nr y -(\\n(.v-\\nz) \
	\"uncertainty correction
&ch fo \\nyu	\"y is negative
&if (\\n(nl+1v)>(\\n(.p+\\ny) \
&ch fo \\n(nlu+1v	 \"didn't fit
&&
&de fs	\"separator
\l'1i'	\"1 inch rule
&br
&&
&de fz	\"get leftover footnote
&fn
&nf	\"retain vertical size
&fy	\"where fx put it
&ef
&&
&nr b 1.0i  \"bottom margin size
&wh 0 hd    \"header trap
&wh 12i fo  \"footer trap->temp pos
&wh -\\nbu fx	\"fx at footer position
&ch fo -\\nbu	\"conceal fx with fo

The header hd initializes a footnote count register x, and sets both the current footer trap position register y and the footer trap itself to a nominal position specified in register b. In addition, if the register dn indicates a leftover footnote, fz is invoked to reprocess it. The footnote start macro fn begins a diversion (append) in environment 1, and increments the count x; if the count is one, the footnote separator fs is interpolated. The separator is kept in a separate macro to permit user redefinition.

The footnote end macro ef restores the previous environment and ends the diversion after saving the spacing size in register z. y is then decremented by the size of the footnote, available in dn; then on the first footnote, y is further decremented by the difference in vertical baseline spacings of the two environments, to prevent the late triggering of the footer trap from causing the last line of the combined footnotes to overflow. The footer trap is then set to the lower (on the page) of y or the current page position (nl) plus one line, to allow for printing the reference line.

If indicated by x, the footer fo rereads the footnotes from FN in nofill mode in environment 1, and deletes FN. If the footnotes were too large to fit, the macro fx will be trap-invoked to redivert the overflow into fy, and the register dn will later indicate to the header whether fy is empty.

Both fo and fx are planted in the nominal footer trap position in an order that causes fx to be concealed unless the fo trap is moved. The footer then terminates the overflow diversion, if necessary, and zeros x to disable fx, because the uncertainty correction together with a not-too-late triggering of the footer can result in the footnote rereading finishing before reaching the fx trap.

A good exercise for the student is to combine the multiple-column and footnote mechanisms.

The Last Page

After the last input file has ended, nroff and troff invoke the end macro (§7), if any, and when it finishes, eject the remainder of the page. During the eject, any traps encountered are processed normally. At the end of this last page, processing terminates unless a partial line, word, or partial word remains. If it is desired that another page be started, the end-macro

&de en	\"end-macro
\c
'bp
&&
&em en
will deposit a null partial word, and produce another last page.






Special Character Names

The following table lists names for a set of characters, most of which have traditionally been provided by troff using the `special' or `symbol' font. Many of these sequences are old ways to get what are now Unicode characters; Lucida Sans, for example, has glyphs corresponding to many of these but does not have the special sequences. Therefore the troff sequence gives the character ¿ from the Times font instead of the character ¿ from the current font, in this case Lucida Sans. Not all sequences print on any particular device, including this one; Peter faces appear in their place.



Copyright © 2000 Lucent Technologies Inc. All rights reserved.