/* * AMD79C970 * PCnet-PCI Single-Chip Ethernet Controller for PCI Local Bus * To do: * finish this rewrite */ #include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" #include "../port/error.h" #include "../port/netif.h" #include "etherif.h" enum { Lognrdre = 6, Nrdre = (1<= Rdp) r = (r-Rdp)/2+Rdp; return ins(c->port+r); } static void io16w(Ctlr *c, int r, int v) { if(r >= Rdp) r = (r-Rdp)/2+Rdp; outs(c->port+r, v); } static int io32r(Ctlr *c, int r) { return inl(c->port+r); } static void io32w(Ctlr *c, int r, int v) { outl(c->port+r, v); } static void attach(Ether*) { } static long ifstat(Ether* ether, void* a, long n, ulong offset) { char *p; int len; Ctlr *ctlr; ctlr = ether->ctlr; ether->crcs = ctlr->crc; ether->frames = ctlr->fram; ether->buffs = ctlr->rxbuff+ctlr->txbuff; ether->overflows = ctlr->oflo; if(n == 0) return 0; p = malloc(READSTR); len = snprint(p, READSTR, "Rxbuff: %ld\n", ctlr->rxbuff); len += snprint(p+len, READSTR-len, "Crc: %ld\n", ctlr->crc); len += snprint(p+len, READSTR-len, "Oflo: %ld\n", ctlr->oflo); len += snprint(p+len, READSTR-len, "Fram: %ld\n", ctlr->fram); len += snprint(p+len, READSTR-len, "Rtry: %ld\n", ctlr->rtry); len += snprint(p+len, READSTR-len, "Lcar: %ld\n", ctlr->lcar); len += snprint(p+len, READSTR-len, "Lcol: %ld\n", ctlr->lcol); len += snprint(p+len, READSTR-len, "Uflo: %ld\n", ctlr->uflo); len += snprint(p+len, READSTR-len, "Txbuff: %ld\n", ctlr->txbuff); len += snprint(p+len, READSTR-len, "Merr: %ld\n", ctlr->merr); len += snprint(p+len, READSTR-len, "Miss: %ld\n", ctlr->miss); snprint(p+len, READSTR-len, "Babl: %ld\n", ctlr->babl); n = readstr(offset, a, n, p); free(p); return n; } static void ringinit(Ctlr* ctlr) { Dre *dre; /* * Initialise the receive and transmit buffer rings. * The ring entries must be aligned on 16-byte boundaries. * * This routine is protected by ctlr->init. */ if(ctlr->rdr == 0){ ctlr->rdr = xspanalloc(Nrdre*sizeof(Dre), 0x10, 0); for(dre = ctlr->rdr; dre < &ctlr->rdr[Nrdre]; dre++){ dre->bp = iallocb(Rbsize); if(dre->bp == nil) panic("can't allocate ethernet receive ring\n"); dre->addr = PADDR(dre->bp->rp); dre->md2 = 0; dre->md1 = Own|(-Rbsize & 0xFFFF); } } ctlr->rdrx = 0; if(ctlr->tdr == 0) ctlr->tdr = xspanalloc(Ntdre*sizeof(Dre), 0x10, 0); memset(ctlr->tdr, 0, Ntdre*sizeof(Dre)); ctlr->tdrh = ctlr->tdri = 0; } static void promiscuous(void* arg, int on) { Ether *ether; int x; Ctlr *ctlr; ether = arg; ctlr = ether->ctlr; /* * Put the chip into promiscuous mode. First must wait until * anyone transmitting is done, then stop the chip and put * it in promiscuous mode. Restarting is made harder by the chip * reloading the transmit and receive descriptor pointers with their * base addresses when Strt is set (unlike the older Lance chip), * so the rings must be re-initialised. */ ilock(ctlr); if(ctlr->init){ iunlock(ctlr); return; } ctlr->init = 1; iunlock(ctlr); while(ctlr->ntq) ; ctlr->iow(ctlr, Rdp, Stop); ctlr->iow(ctlr, Rap, 15); x = ctlr->ior(ctlr, Rdp) & ~Prom; if(on) x |= Prom; ctlr->iow(ctlr, Rdp, x); ctlr->iow(ctlr, Rap, 0); ringinit(ctlr); ilock(ctlr); ctlr->init = 0; ctlr->iow(ctlr, Rdp, Iena|Strt); iunlock(ctlr); } static void multicast(void* arg, uchar*, int) { promiscuous(arg, 1); } static void txstart(Ether* ether) { Ctlr *ctlr; Block *bp; Dre *dre; ctlr = ether->ctlr; if(ctlr->init) return; while(ctlr->ntq < (Ntdre-1)){ bp = qget(ether->oq); if(bp == nil) break; /* * Give ownership of the descriptor to the chip, * increment the software ring descriptor pointer * and tell the chip to poll. * There's no need to pad to ETHERMINTU * here as ApadXmt is set in CSR4. */ dre = &ctlr->tdr[ctlr->tdrh]; dre->bp = bp; dre->addr = PADDR(bp->rp); dre->md2 = 0; dre->md1 = Own|Stp|Enp|(-BLEN(bp) & 0xFFFF); ctlr->ntq++; ctlr->iow(ctlr, Rdp, Iena|Tdmd); ctlr->tdrh = NEXT(ctlr->tdrh, Ntdre); } } static void transmit(Ether* ether) { Ctlr *ctlr; ctlr = ether->ctlr; ilock(ctlr); txstart(ether); iunlock(ctlr); } static void interrupt(Ureg*, void* arg) { Ctlr *ctlr; Ether *ether; int csr0, len; Dre *dre; Block *bp; ether = arg; ctlr = ether->ctlr; /* * Acknowledge all interrupts and whine about those that shouldn't * happen. */ intrloop: csr0 = ctlr->ior(ctlr, Rdp) & 0xFFFF; ctlr->iow(ctlr, Rdp, Babl|Cerr|Miss|Merr|Rint|Tint|Iena); if(csr0 & Merr) ctlr->merr++; if(csr0 & Miss) ctlr->miss++; if(csr0 & Babl) ctlr->babl++; //if(csr0 & (Babl|Miss|Merr)) // print("#l%d: csr0 = 0x%uX\n", ether->ctlrno, csr0); if(!(csr0 & (Rint|Tint))) return; /* * Receiver interrupt: run round the descriptor ring logging * errors and passing valid receive data up to the higher levels * until a descriptor is encountered still owned by the chip. */ if(csr0 & Rint){ dre = &ctlr->rdr[ctlr->rdrx]; while(!(dre->md1 & Own)){ if(dre->md1 & RxErr){ if(dre->md1 & RxBuff) ctlr->rxbuff++; if(dre->md1 & Crc) ctlr->crc++; if(dre->md1 & Oflo) ctlr->oflo++; if(dre->md1 & Fram) ctlr->fram++; } else if(bp = iallocb(Rbsize)){ len = (dre->md2 & 0x0FFF)-4; dre->bp->wp = dre->bp->rp+len; etheriq(ether, dre->bp, 1); dre->bp = bp; dre->addr = PADDR(bp->rp); } /* * Finished with this descriptor, reinitialise it, * give it back to the chip, then on to the next... */ dre->md2 = 0; dre->md1 = Own|(-Rbsize & 0xFFFF); ctlr->rdrx = NEXT(ctlr->rdrx, Nrdre); dre = &ctlr->rdr[ctlr->rdrx]; } } /* * Transmitter interrupt: wakeup anyone waiting for a free descriptor. */ if(csr0 & Tint){ lock(ctlr); while(ctlr->ntq){ dre = &ctlr->tdr[ctlr->tdri]; if(dre->md1 & Own) break; if(dre->md1 & TxErr){ if(dre->md2 & Rtry) ctlr->rtry++; if(dre->md2 & Lcar) ctlr->lcar++; if(dre->md2 & Lcol) ctlr->lcol++; if(dre->md2 & Uflo) ctlr->uflo++; if(dre->md2 & TxBuff) ctlr->txbuff++; ether->oerrs++; } freeb(dre->bp); ctlr->ntq--; ctlr->tdri = NEXT(ctlr->tdri, Ntdre); } txstart(ether); unlock(ctlr); } goto intrloop; } static void amd79c970pci(void) { int port; Ctlr *ctlr; Pcidev *p; p = nil; while(p = pcimatch(p, 0x1022, 0x2000)){ port = p->mem[0].bar & ~0x01; if(ioalloc(port, p->mem[0].size, 0, "amd79c970") < 0){ print("amd79c970: port 0x%uX in use\n", port); continue; } ctlr = malloc(sizeof(Ctlr)); ctlr->port = p->mem[0].bar & ~0x01; ctlr->pcidev = p; if(ctlrhead != nil) ctlrtail->next = ctlr; else ctlrhead = ctlr; ctlrtail = ctlr; } } static int reset(Ether* ether) { int x; uchar ea[Eaddrlen]; Ctlr *ctlr; if(ctlrhead == nil) amd79c970pci(); /* * Any adapter matches if no port is supplied, * otherwise the ports must match. */ for(ctlr = ctlrhead; ctlr != nil; ctlr = ctlr->next){ if(ctlr->active) continue; if(ether->port == 0 || ether->port == ctlr->port){ ctlr->active = 1; break; } } if(ctlr == nil) return -1; /* * Allocate a controller structure and start to initialise it. */ ether->ctlr = ctlr; ether->port = ctlr->port; ether->irq = ctlr->pcidev->intl; ether->tbdf = ctlr->pcidev->tbdf; pcisetbme(ctlr->pcidev); ilock(ctlr); ctlr->init = 1; io32r(ctlr, Sreset); io16r(ctlr, Sreset); if(io16w(ctlr, Rap, 0), io16r(ctlr, Rdp) == 4){ ctlr->ior = io16r; ctlr->iow = io16w; }else if(io32w(ctlr, Rap, 0), io32r(ctlr, Rdp) == 4){ ctlr->ior = io32r; ctlr->iow = io32w; }else{ print("#l%d: card doesn't talk right\n", ether->ctlrno); iunlock(ctlr); return -1; } ctlr->iow(ctlr, Rap, 88); x = ctlr->ior(ctlr, Rdp); ctlr->iow(ctlr, Rap, 89); x |= ctlr->ior(ctlr, Rdp)<<16; switch(x&0xFFFFFFF){ case 0x2420003: /* PCnet/PCI 79C970 */ case 0x2621003: /* PCnet/PCI II 79C970A */ break; default: print("#l%d: unknown PCnet card version %.7ux\n", ether->ctlrno, x&0xFFFFFFF); iunlock(ctlr); return -1; } /* * Set the software style in BCR20 to be PCnet-PCI to ensure 32-bit access. * Set the auto pad transmit in CSR4. */ ctlr->iow(ctlr, Rap, 20); ctlr->iow(ctlr, Bdp, 0x0002); ctlr->iow(ctlr, Rap, 4); x = ctlr->ior(ctlr, Rdp) & 0xFFFF; ctlr->iow(ctlr, Rdp, ApadXmt|x); ctlr->iow(ctlr, Rap, 0); /* * Check if the adapter's station address is to be overridden. * If not, read it from the I/O-space and set in ether->ea prior to * loading the station address in the initialisation block. */ memset(ea, 0, Eaddrlen); if(!memcmp(ea, ether->ea, Eaddrlen)){ x = ctlr->ior(ctlr, Aprom); ether->ea[0] = x; ether->ea[1] = x>>8; if(ctlr->ior == io16r) x = ctlr->ior(ctlr, Aprom+2); else x >>= 16; ether->ea[2] = x; ether->ea[3] = x>>8; x = ctlr->ior(ctlr, Aprom+4); ether->ea[4] = x; ether->ea[5] = x>>8; } /* * Start to fill in the initialisation block * (must be DWORD aligned). */ ctlr->iblock.rlen = Lognrdre<<4; ctlr->iblock.tlen = Logntdre<<4; memmove(ctlr->iblock.padr, ether->ea, sizeof(ctlr->iblock.padr)); ringinit(ctlr); ctlr->iblock.rdra = PADDR(ctlr->rdr); ctlr->iblock.tdra = PADDR(ctlr->tdr); /* * Point the chip at the initialisation block and tell it to go. * Mask the Idon interrupt and poll for completion. Strt and interrupt * enables will be set later when attaching to the network. */ x = PADDR(&ctlr->iblock); ctlr->iow(ctlr, Rap, 1); ctlr->iow(ctlr, Rdp, x & 0xFFFF); ctlr->iow(ctlr, Rap, 2); ctlr->iow(ctlr, Rdp, (x>>16) & 0xFFFF); ctlr->iow(ctlr, Rap, 3); ctlr->iow(ctlr, Rdp, Idon); ctlr->iow(ctlr, Rap, 0); ctlr->iow(ctlr, Rdp, Init); while(!(ctlr->ior(ctlr, Rdp) & Idon)) ; /* * We used to set CSR0 to Idon|Stop here, and then * in attach change it to Iena|Strt. Apparently the simulated * 79C970 in VMware never enables after a write of Idon|Stop, * so we enable the device here now. */ ctlr->iow(ctlr, Rdp, Iena|Strt); ctlr->init = 0; iunlock(ctlr); /* * Linkage to the generic ethernet driver. */ ether->attach = attach; ether->transmit = transmit; ether->interrupt = interrupt; ether->ifstat = ifstat; ether->arg = ether; ether->promiscuous = promiscuous; ether->multicast = multicast; // ether->shutdown = shutdown; return 0; } void ether79c970link(void) { addethercard("AMD79C970", reset); }