#include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" #include "ureg.h" #include "init.h" #include "pool.h" #include "reboot.h" Mach *m; /* * Where configuration info is left for the loaded programme. * This will turn into a structure as more is done by the boot loader * (e.g. why parse the .ini file twice?). * There are 3584 bytes available at CONFADDR. */ #define BOOTLINE ((char*)CONFADDR) #define BOOTLINELEN 64 #define BOOTARGS ((char*)(CONFADDR+BOOTLINELEN)) #define BOOTARGSLEN (4096-0x200-BOOTLINELEN) #define MAXCONF 64 char bootdisk[KNAMELEN]; Conf conf; char *confname[MAXCONF]; char *confval[MAXCONF]; int nconf; uchar *sp; /* user stack of init proc */ int delaylink; static void options(void) { long i, n; char *cp, *line[MAXCONF], *p, *q; /* * parse configuration args from dos file plan9.ini */ cp = BOOTARGS; /* where b.com leaves its config */ cp[BOOTARGSLEN-1] = 0; /* * Strip out '\r', change '\t' -> ' '. */ p = cp; for(q = cp; *q; q++){ if(*q == '\r') continue; if(*q == '\t') *q = ' '; *p++ = *q; } *p = 0; n = getfields(cp, line, MAXCONF, 1, "\n"); for(i = 0; i < n; i++){ if(*line[i] == '#') continue; cp = strchr(line[i], '='); if(cp == nil) continue; *cp++ = '\0'; confname[nconf] = line[i]; confval[nconf] = cp; nconf++; } } extern void mmuinit0(void); extern void (*i8237alloc)(void); void main(void) { mach0init(); options(); ioinit(); i8250console(); quotefmtinstall(); screeninit(); print("\nPlan 9\n"); trapinit0(); mmuinit0(); kbdinit(); i8253init(); cpuidentify(); meminit(); confinit(); archinit(); xinit(); if(i8237alloc != nil) i8237alloc(); trapinit(); printinit(); cpuidprint(); mmuinit(); if(arch->intrinit) /* launches other processors on an mp */ arch->intrinit(); timersinit(); mathinit(); kbdenable(); if(arch->clockenable) arch->clockenable(); procinit0(); initseg(); if(delaylink){ bootlinks(); pcimatch(0, 0, 0); }else links(); conf.monitor = 1; chandevreset(); pageinit(); i8253link(); swapinit(); userinit(); active.thunderbirdsarego = 1; schedinit(); } void mach0init(void) { conf.nmach = 1; MACHP(0) = (Mach*)CPU0MACH; m->pdb = (ulong*)CPU0PDB; m->gdt = (Segdesc*)CPU0GDT; machinit(); active.machs = 1; active.exiting = 0; } void machinit(void) { int machno; ulong *pdb; Segdesc *gdt; machno = m->machno; pdb = m->pdb; gdt = m->gdt; memset(m, 0, sizeof(Mach)); m->machno = machno; m->pdb = pdb; m->gdt = gdt; m->perf.period = 1; /* * For polled uart output at boot, need * a default delay constant. 100000 should * be enough for a while. Cpuidentify will * calculate the real value later. */ m->loopconst = 100000; } void init0(void) { int i; char buf[2*KNAMELEN]; up->nerrlab = 0; spllo(); /* * These are o.k. because rootinit is null. * Then early kproc's will have a root and dot. */ up->slash = namec("#/", Atodir, 0, 0); pathclose(up->slash->path); up->slash->path = newpath("/"); up->dot = cclone(up->slash); chandevinit(); if(!waserror()){ snprint(buf, sizeof(buf), "%s %s", arch->id, conffile); ksetenv("terminal", buf, 0); ksetenv("cputype", "386", 0); if(cpuserver) ksetenv("service", "cpu", 0); else ksetenv("service", "terminal", 0); for(i = 0; i < nconf; i++){ if(confname[i][0] != '*') ksetenv(confname[i], confval[i], 0); ksetenv(confname[i], confval[i], 1); } poperror(); } kproc("alarm", alarmkproc, 0); touser(sp); } void userinit(void) { void *v; Proc *p; Segment *s; Page *pg; p = newproc(); p->pgrp = newpgrp(); p->egrp = smalloc(sizeof(Egrp)); p->egrp->ref = 1; p->fgrp = dupfgrp(nil); p->rgrp = newrgrp(); p->procmode = 0640; kstrdup(&eve, ""); kstrdup(&p->text, "*init*"); kstrdup(&p->user, eve); p->fpstate = FPinit; fpoff(); /* * Kernel Stack * * N.B. make sure there's enough space for syscall to check * for valid args and * 4 bytes for gotolabel's return PC */ p->sched.pc = (ulong)init0; p->sched.sp = (ulong)p->kstack+KSTACK-(sizeof(Sargs)+BY2WD); /* * User Stack * * N.B. cannot call newpage() with clear=1, because pc kmap * requires up != nil. use tmpmap instead. */ s = newseg(SG_STACK, USTKTOP-USTKSIZE, USTKSIZE/BY2PG); p->seg[SSEG] = s; pg = newpage(0, 0, USTKTOP-BY2PG); v = tmpmap(pg); memset(v, 0, BY2PG); segpage(s, pg); bootargs(v); tmpunmap(v); /* * Text */ s = newseg(SG_TEXT, UTZERO, 1); s->flushme++; p->seg[TSEG] = s; pg = newpage(0, 0, UTZERO); memset(pg->cachectl, PG_TXTFLUSH, sizeof(pg->cachectl)); segpage(s, pg); v = tmpmap(pg); memset(v, 0, BY2PG); memmove(v, initcode, sizeof initcode); tmpunmap(v); ready(p); } uchar * pusharg(char *p) { int n; n = strlen(p)+1; sp -= n; memmove(sp, p, n); return sp; } void bootargs(void *base) { int i, ac; uchar *av[32]; uchar **lsp; char *cp = BOOTLINE; char buf[64]; sp = (uchar*)base + BY2PG - MAXSYSARG*BY2WD; ac = 0; av[ac++] = pusharg("/386/9dos"); /* when boot is changed to only use rc, this code can go away */ cp[BOOTLINELEN-1] = 0; buf[0] = 0; if(strncmp(cp, "fd", 2) == 0){ sprint(buf, "local!#f/fd%lddisk", strtol(cp+2, 0, 0)); av[ac++] = pusharg(buf); } else if(strncmp(cp, "sd", 2) == 0){ sprint(buf, "local!#S/sd%c%c/fs", *(cp+2), *(cp+3)); av[ac++] = pusharg(buf); } else if(strncmp(cp, "ether", 5) == 0) av[ac++] = pusharg("-n"); /* 4 byte word align stack */ sp = (uchar*)((ulong)sp & ~3); /* build argc, argv on stack */ sp -= (ac+1)*sizeof(sp); lsp = (uchar**)sp; for(i = 0; i < ac; i++) *lsp++ = av[i] + ((USTKTOP - BY2PG) - (ulong)base); *lsp = 0; sp += (USTKTOP - BY2PG) - (ulong)base - sizeof(ulong); } char* getconf(char *name) { int i; for(i = 0; i < nconf; i++) if(cistrcmp(confname[i], name) == 0) return confval[i]; return 0; } static void writeconf(void) { char *p, *q; int n; p = getconfenv(); if(waserror()) { free(p); nexterror(); } /* convert to name=value\n format */ for(q=p; *q; q++) { q += strlen(q); *q = '='; q += strlen(q); *q = '\n'; } n = q - p + 1; if(n >= BOOTARGSLEN) error("kernel configuration too large"); memset(BOOTLINE, 0, BOOTLINELEN); memmove(BOOTARGS, p, n); poperror(); free(p); } void confinit(void) { char *p; int i, userpcnt; ulong kpages; if(p = getconf("*kernelpercent")) userpcnt = 100 - strtol(p, 0, 0); else userpcnt = 0; conf.npage = 0; for(i=0; i 2000) conf.nproc = 2000; conf.nimage = 200; conf.nswap = conf.nproc*80; conf.nswppo = 4096; if(cpuserver) { if(userpcnt < 10) userpcnt = 70; kpages = conf.npage - (conf.npage*userpcnt)/100; /* * Hack for the big boys. Only good while physmem < 4GB. * Give the kernel fixed max + enough to allocate the * page pool. * This is an overestimate as conf.upages < conf.npages. * The patch of nimage is a band-aid, scanning the whole * page list in imagereclaim just takes too long. */ if(kpages > (64*MB + conf.npage*sizeof(Page))/BY2PG){ kpages = (64*MB + conf.npage*sizeof(Page))/BY2PG; conf.nimage = 2000; kpages += (conf.nproc*KSTACK)/BY2PG; } } else { if(userpcnt < 10) { if(conf.npage*BY2PG < 16*MB) userpcnt = 40; else userpcnt = 60; } kpages = conf.npage - (conf.npage*userpcnt)/100; /* * Make sure terminals with low memory get at least * 4MB on the first Image chunk allocation. */ if(conf.npage*BY2PG < 16*MB) imagmem->minarena = 4*1024*1024; } /* * can't go past the end of virtual memory * (ulong)-KZERO is 2^32 - KZERO */ if(kpages > ((ulong)-KZERO)/BY2PG) kpages = ((ulong)-KZERO)/BY2PG; conf.upages = conf.npage - kpages; conf.ialloc = (kpages/2)*BY2PG; /* * Guess how much is taken by the large permanent * datastructures. Mntcache and Mntrpc are not accounted for * (probably ~300KB). */ kpages *= BY2PG; kpages -= conf.upages*sizeof(Page) + conf.nproc*sizeof(Proc) + conf.nimage*sizeof(Image) + conf.nswap + conf.nswppo*sizeof(Page); mainmem->maxsize = kpages; if(!cpuserver){ /* * give terminals lots of image memory, too; the dynamic * allocation will balance the load properly, hopefully. * be careful with 32-bit overflow. */ imagmem->maxsize = kpages; } } static char* mathmsg[] = { nil, /* handled below */ "denormalized operand", "division by zero", "numeric overflow", "numeric underflow", "precision loss", }; static void mathnote(void) { int i; ulong status; char *msg, note[ERRMAX]; status = up->fpsave.status; /* * Some attention should probably be paid here to the * exception masks and error summary. */ msg = "unknown exception"; for(i = 1; i <= 5; i++){ if(!((1<fpsave.pc, status); postnote(up, 1, note, NDebug); } /* * math coprocessor error */ static void matherror(Ureg *ur, void*) { /* * a write cycle to port 0xF0 clears the interrupt latch attached * to the error# line from the 387 */ if(!(m->cpuiddx & 0x01)) outb(0xF0, 0xFF); /* * save floating point state to check out error */ fpenv(&up->fpsave); mathnote(); if((ur->pc & 0xf0000000) == KZERO) panic("fp: status %ux fppc=0x%lux pc=0x%lux", up->fpsave.status, up->fpsave.pc, ur->pc); } /* * math coprocessor emulation fault */ static void mathemu(Ureg *ureg, void*) { if(up->fpstate & FPillegal){ /* someone did floating point in a note handler */ postnote(up, 1, "sys: floating point in note handler", NDebug); return; } switch(up->fpstate){ case FPinit: fpinit(); up->fpstate = FPactive; break; case FPinactive: /* * Before restoring the state, check for any pending * exceptions, there's no way to restore the state without * generating an unmasked exception. * More attention should probably be paid here to the * exception masks and error summary. */ if((up->fpsave.status & ~up->fpsave.control) & 0x07F){ mathnote(); break; } fprestore(&up->fpsave); up->fpstate = FPactive; break; case FPactive: panic("math emu pid %ld %s pc 0x%lux", up->pid, up->text, ureg->pc); break; } } /* * math coprocessor segment overrun */ static void mathover(Ureg*, void*) { pexit("math overrun", 0); } void mathinit(void) { trapenable(VectorCERR, matherror, 0, "matherror"); if(X86FAMILY(m->cpuidax) == 3) intrenable(IrqIRQ13, matherror, 0, BUSUNKNOWN, "matherror"); trapenable(VectorCNA, mathemu, 0, "mathemu"); trapenable(VectorCSO, mathover, 0, "mathover"); } /* * set up floating point for a new process */ void procsetup(Proc*p) { p->fpstate = FPinit; fpoff(); } void procrestore(Proc *p) { uvlong t; if(p->kp) return; cycles(&t); p->pcycles -= t; } /* * Save the mach dependent part of the process state. */ void procsave(Proc *p) { uvlong t; cycles(&t); p->pcycles += t; if(p->fpstate == FPactive){ if(p->state == Moribund) fpclear(); else{ /* * Fpsave() stores without handling pending * unmasked exeptions. Postnote() can't be called * here as sleep() already has up->rlock, so * the handling of pending exceptions is delayed * until the process runs again and generates an * emulation fault to activate the FPU. */ fpsave(&p->fpsave); } p->fpstate = FPinactive; } /* * While this processor is in the scheduler, the process could run * on another processor and exit, returning the page tables to * the free list where they could be reallocated and overwritten. * When this processor eventually has to get an entry from the * trashed page tables it will crash. * * If there's only one processor, this can't happen. * You might think it would be a win not to do this in that case, * especially on VMware, but it turns out not to matter. */ mmuflushtlb(PADDR(m->pdb)); } static void shutdown(int ispanic) { int ms, once; lock(&active); if(ispanic) active.ispanic = ispanic; else if(m->machno == 0 && (active.machs & (1<machno)) == 0) active.ispanic = 0; once = active.machs & (1<machno); active.machs &= ~(1<machno); active.exiting = 1; unlock(&active); if(once) iprint("cpu%d: exiting\n", m->machno); spllo(); for(ms = 5*1000; ms > 0; ms -= TK2MS(2)){ delay(TK2MS(2)); if(active.machs == 0 && consactive() == 0) break; } if(getconf("*debug")) delay(5*60*1000); if(active.ispanic){ if(!cpuserver) for(;;) halt(); delay(10000); }else delay(1000); } void reboot(void *entry, void *code, ulong size) { void (*f)(ulong, ulong, ulong); ulong *pdb; writeconf(); shutdown(0); /* * should be the only processor running now */ print("shutting down...\n"); delay(200); splhi(); /* turn off buffered serial console */ serialoq = nil; /* shutdown devices */ chandevshutdown(); /* * Modify the machine page table to directly map the low 4MB of memory * This allows the reboot code to turn off the page mapping */ pdb = m->pdb; pdb[PDX(0)] = pdb[PDX(KZERO)]; mmuflushtlb(PADDR(pdb)); /* setup reboot trampoline function */ f = (void*)REBOOTADDR; memmove(f, rebootcode, sizeof(rebootcode)); print("rebooting...\n"); /* off we go - never to return */ (*f)(PADDR(entry), PADDR(code), size); } void exit(int ispanic) { shutdown(ispanic); arch->reset(); } int isaconfig(char *class, int ctlrno, ISAConf *isa) { char cc[32], *p; int i; snprint(cc, sizeof cc, "%s%d", class, ctlrno); p = getconf(cc); if(p == nil) return 0; isa->type = ""; isa->nopt = tokenize(p, isa->opt, NISAOPT); for(i = 0; i < isa->nopt; i++){ p = isa->opt[i]; if(cistrncmp(p, "type=", 5) == 0) isa->type = p + 5; else if(cistrncmp(p, "port=", 5) == 0) isa->port = strtoul(p+5, &p, 0); else if(cistrncmp(p, "irq=", 4) == 0) isa->irq = strtoul(p+4, &p, 0); else if(cistrncmp(p, "dma=", 4) == 0) isa->dma = strtoul(p+4, &p, 0); else if(cistrncmp(p, "mem=", 4) == 0) isa->mem = strtoul(p+4, &p, 0); else if(cistrncmp(p, "size=", 5) == 0) isa->size = strtoul(p+5, &p, 0); else if(cistrncmp(p, "freq=", 5) == 0) isa->freq = strtoul(p+5, &p, 0); } return 1; } int cistrcmp(char *a, char *b) { int ac, bc; for(;;){ ac = *a++; bc = *b++; if(ac >= 'A' && ac <= 'Z') ac = 'a' + (ac - 'A'); if(bc >= 'A' && bc <= 'Z') bc = 'a' + (bc - 'A'); ac -= bc; if(ac) return ac; if(bc == 0) break; } return 0; } int cistrncmp(char *a, char *b, int n) { unsigned ac, bc; while(n > 0){ ac = *a++; bc = *b++; n--; if(ac >= 'A' && ac <= 'Z') ac = 'a' + (ac - 'A'); if(bc >= 'A' && bc <= 'Z') bc = 'a' + (bc - 'A'); ac -= bc; if(ac) return ac; if(bc == 0) break; } return 0; } /* * put the processor in the halt state if we've no processes to run. * an interrupt will get us going again. */ void idlehands(void) { if(conf.nmach == 1) halt(); }