/* * Memory mappings. Life was easier when 2G of memory was enough. * * The kernel memory starts at KZERO, with the text loaded at KZERO+1M * (9load sits under 1M during the load). The memory from KZERO to the * top of memory is mapped 1-1 with physical memory, starting at physical * address 0. All kernel memory and data structures (i.e., the entries stored * into conf.mem) must sit in this physical range: if KZERO is at 0xF0000000, * then the kernel can only have 256MB of memory for itself. * * The 256M below KZERO comprises three parts. The lowest 4M is the * virtual page table, a virtual address representation of the current * page table tree. The second 4M is used for temporary per-process * mappings managed by kmap and kunmap. The remaining 248M is used * for global (shared by all procs and all processors) device memory * mappings and managed by vmap and vunmap. The total amount (256M) * could probably be reduced somewhat if desired. The largest device * mapping is that of the video card, and even though modern video cards * have embarrassing amounts of memory, the video drivers only use one * frame buffer worth (at most 16M). Each is described in more detail below. * * The VPT is a 4M frame constructed by inserting the pdb into itself. * This short-circuits one level of the page tables, with the result that * the contents of second-level page tables can be accessed at VPT. * We use the VPT to edit the page tables (see mmu) after inserting them * into the page directory. It is a convenient mechanism for mapping what * might be otherwise-inaccessible pages. The idea was borrowed from * the Exokernel. * * The VPT doesn't solve all our problems, because we still need to * prepare page directories before we can install them. For that, we * use tmpmap/tmpunmap, which map a single page at TMPADDR. */ #include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" /* * Simple segment descriptors with no translation. */ #define DATASEGM(p) { 0xFFFF, SEGG|SEGB|(0xF<<16)|SEGP|SEGPL(p)|SEGDATA|SEGW } #define EXECSEGM(p) { 0xFFFF, SEGG|SEGD|(0xF<<16)|SEGP|SEGPL(p)|SEGEXEC|SEGR } #define EXEC16SEGM(p) { 0xFFFF, SEGG|(0xF<<16)|SEGP|SEGPL(p)|SEGEXEC|SEGR } #define TSSSEGM(b,p) { ((b)<<16)|sizeof(Tss),\ ((b)&0xFF000000)|(((b)>>16)&0xFF)|SEGTSS|SEGPL(p)|SEGP } Segdesc gdt[NGDT] = { [NULLSEG] { 0, 0}, /* null descriptor */ [KDSEG] DATASEGM(0), /* kernel data/stack */ [KESEG] EXECSEGM(0), /* kernel code */ [UDSEG] DATASEGM(3), /* user data/stack */ [UESEG] EXECSEGM(3), /* user code */ [TSSSEG] TSSSEGM(0,0), /* tss segment */ [KESEG16] EXEC16SEGM(0), /* kernel code 16-bit */ }; static int didmmuinit; static void taskswitch(ulong, ulong); static void memglobal(void); #define vpt ((ulong*)VPT) #define VPTX(va) (((ulong)(va))>>12) #define vpd (vpt+VPTX(VPT)) void mmuinit0(void) { memmove(m->gdt, gdt, sizeof gdt); } void mmuinit(void) { ulong x, *p; ushort ptr[3]; didmmuinit = 1; if(0) print("vpt=%#.8ux vpd=%#p kmap=%#.8ux\n", VPT, vpd, KMAP); memglobal(); m->pdb[PDX(VPT)] = PADDR(m->pdb)|PTEWRITE|PTEVALID; m->tss = malloc(sizeof(Tss)); memset(m->tss, 0, sizeof(Tss)); m->tss->iomap = 0xDFFF<<16; /* * We used to keep the GDT in the Mach structure, but it * turns out that that slows down access to the rest of the * page. Since the Mach structure is accessed quite often, * it pays off anywhere from a factor of 1.25 to 2 on real * hardware to separate them (the AMDs are more sensitive * than Intels in this regard). Under VMware it pays off * a factor of about 10 to 100. */ memmove(m->gdt, gdt, sizeof gdt); x = (ulong)m->tss; m->gdt[TSSSEG].d0 = (x<<16)|sizeof(Tss); m->gdt[TSSSEG].d1 = (x&0xFF000000)|((x>>16)&0xFF)|SEGTSS|SEGPL(0)|SEGP; ptr[0] = sizeof(gdt)-1; x = (ulong)m->gdt; ptr[1] = x & 0xFFFF; ptr[2] = (x>>16) & 0xFFFF; lgdt(ptr); ptr[0] = sizeof(Segdesc)*256-1; x = IDTADDR; ptr[1] = x & 0xFFFF; ptr[2] = (x>>16) & 0xFFFF; lidt(ptr); /* make kernel text unwritable */ for(x = KTZERO; x < (ulong)etext; x += BY2PG){ p = mmuwalk(m->pdb, x, 2, 0); if(p == nil) panic("mmuinit"); *p &= ~PTEWRITE; } taskswitch(PADDR(m->pdb), (ulong)m + BY2PG); ltr(TSSSEL); } /* * On processors that support it, we set the PTEGLOBAL bit in * page table and page directory entries that map kernel memory. * Doing this tells the processor not to bother flushing them * from the TLB when doing the TLB flush associated with a * context switch (write to CR3). Since kernel memory mappings * are never removed, this is safe. (If we ever remove kernel memory * mappings, we can do a full flush by turning off the PGE bit in CR4, * writing to CR3, and then turning the PGE bit back on.) * * See also mmukmap below. * * Processor support for the PTEGLOBAL bit is enabled in devarch.c. */ static void memglobal(void) { int i, j; ulong *pde, *pte; /* only need to do this once, on bootstrap processor */ if(m->machno != 0) return; if(!m->havepge) return; pde = m->pdb; for(i=PDX(KZERO); i<1024; i++){ if(pde[i] & PTEVALID){ pde[i] |= PTEGLOBAL; if(!(pde[i] & PTESIZE)){ pte = KADDR(pde[i]&~(BY2PG-1)); for(j=0; j<1024; j++) if(pte[j] & PTEVALID) pte[j] |= PTEGLOBAL; } } } } /* * Flush all the user-space and device-mapping mmu info * for this process, because something has been deleted. * It will be paged back in on demand. */ void flushmmu(void) { int s; s = splhi(); up->newtlb = 1; mmuswitch(up); splx(s); } /* * Flush a single page mapping from the tlb. */ void flushpg(ulong va) { if(X86FAMILY(m->cpuidax) >= 4) invlpg(va); else putcr3(getcr3()); } /* * Allocate a new page for a page directory. * We keep a small cache of pre-initialized * page directories in each mach. */ static Page* mmupdballoc(void) { int s; Page *page; ulong *pdb; s = splhi(); m->pdballoc++; if(m->pdbpool == 0){ spllo(); page = newpage(0, 0, 0); page->va = (ulong)vpd; splhi(); pdb = tmpmap(page); memmove(pdb, m->pdb, BY2PG); pdb[PDX(VPT)] = page->pa|PTEWRITE|PTEVALID; /* set up VPT */ tmpunmap(pdb); }else{ page = m->pdbpool; m->pdbpool = page->next; m->pdbcnt--; } splx(s); return page; } static void mmupdbfree(Proc *proc, Page *p) { if(islo()) panic("mmupdbfree: islo"); m->pdbfree++; if(m->pdbcnt >= 10){ p->next = proc->mmufree; proc->mmufree = p; }else{ p->next = m->pdbpool; m->pdbpool = p; m->pdbcnt++; } } /* * A user-space memory segment has been deleted, or the * process is exiting. Clear all the pde entries for user-space * memory mappings and device mappings. Any entries that * are needed will be paged back in as necessary. */ static void mmuptefree(Proc* proc) { int s; ulong *pdb; Page **last, *page; if(proc->mmupdb == nil || proc->mmuused == nil) return; s = splhi(); pdb = tmpmap(proc->mmupdb); last = &proc->mmuused; for(page = *last; page; page = page->next){ pdb[page->daddr] = 0; last = &page->next; } tmpunmap(pdb); splx(s); *last = proc->mmufree; proc->mmufree = proc->mmuused; proc->mmuused = 0; } static void taskswitch(ulong pdb, ulong stack) { Tss *tss; tss = m->tss; tss->ss0 = KDSEL; tss->esp0 = stack; tss->ss1 = KDSEL; tss->esp1 = stack; tss->ss2 = KDSEL; tss->esp2 = stack; putcr3(pdb); } void mmuswitch(Proc* proc) { ulong *pdb; if(proc->newtlb){ mmuptefree(proc); proc->newtlb = 0; } if(proc->mmupdb){ pdb = tmpmap(proc->mmupdb); pdb[PDX(MACHADDR)] = m->pdb[PDX(MACHADDR)]; tmpunmap(pdb); taskswitch(proc->mmupdb->pa, (ulong)(proc->kstack+KSTACK)); }else taskswitch(PADDR(m->pdb), (ulong)(proc->kstack+KSTACK)); } /* * Release any pages allocated for a page directory base or page-tables * for this process: * switch to the prototype pdb for this processor (m->pdb); * call mmuptefree() to place all pages used for page-tables (proc->mmuused) * onto the process' free list (proc->mmufree). This has the side-effect of * cleaning any user entries in the pdb (proc->mmupdb); * if there's a pdb put it in the cache of pre-initialised pdb's * for this processor (m->pdbpool) or on the process' free list; * finally, place any pages freed back into the free pool (palloc). * This routine is only called from schedinit() with palloc locked. */ void mmurelease(Proc* proc) { Page *page, *next; ulong *pdb; if(islo()) panic("mmurelease: islo"); taskswitch(PADDR(m->pdb), (ulong)m + BY2PG); if(proc->kmaptable){ if(proc->mmupdb == nil) panic("mmurelease: no mmupdb"); if(--proc->kmaptable->ref) panic("mmurelease: kmap ref %d\n", proc->kmaptable->ref); if(proc->nkmap) panic("mmurelease: nkmap %d\n", proc->nkmap); /* * remove kmaptable from pdb before putting pdb up for reuse. */ pdb = tmpmap(proc->mmupdb); if(PPN(pdb[PDX(KMAP)]) != proc->kmaptable->pa) panic("mmurelease: bad kmap pde %#.8lux kmap %#.8lux", pdb[PDX(KMAP)], proc->kmaptable->pa); pdb[PDX(KMAP)] = 0; tmpunmap(pdb); /* * move kmaptable to free list. */ pagechainhead(proc->kmaptable); proc->kmaptable = 0; } if(proc->mmupdb){ mmuptefree(proc); mmupdbfree(proc, proc->mmupdb); proc->mmupdb = 0; } for(page = proc->mmufree; page; page = next){ next = page->next; if(--page->ref) panic("mmurelease: page->ref %d\n", page->ref); pagechainhead(page); } if(proc->mmufree && palloc.r.p) wakeup(&palloc.r); proc->mmufree = 0; } /* * Allocate and install pdb for the current process. */ static void upallocpdb(void) { int s; ulong *pdb; Page *page; if(up->mmupdb != nil) return; page = mmupdballoc(); s = splhi(); if(up->mmupdb != nil){ /* * Perhaps we got an interrupt while * mmupdballoc was sleeping and that * interrupt allocated an mmupdb? * Seems unlikely. */ mmupdbfree(up, page); splx(s); return; } pdb = tmpmap(page); pdb[PDX(MACHADDR)] = m->pdb[PDX(MACHADDR)]; tmpunmap(pdb); up->mmupdb = page; putcr3(up->mmupdb->pa); splx(s); } /* * Update the mmu in response to a user fault. pa may have PTEWRITE set. */ void putmmu(ulong va, ulong pa, Page*) { int old, s; Page *page; if(up->mmupdb == nil) upallocpdb(); /* * We should be able to get through this with interrupts * turned on (if we get interrupted we'll just pick up * where we left off) but we get many faults accessing * vpt[] near the end of this function, and they always happen * after the process has been switched out and then * switched back, usually many times in a row (perhaps * it cannot switch back successfully for some reason). * * In any event, I'm tired of searching for this bug. * Turn off interrupts during putmmu even though * we shouldn't need to. - rsc */ s = splhi(); if(!(vpd[PDX(va)]&PTEVALID)){ if(up->mmufree == 0){ spllo(); page = newpage(0, 0, 0); splhi(); } else{ page = up->mmufree; up->mmufree = page->next; } vpd[PDX(va)] = PPN(page->pa)|PTEUSER|PTEWRITE|PTEVALID; /* page is now mapped into the VPT - clear it */ memset((void*)(VPT+PDX(va)*BY2PG), 0, BY2PG); page->daddr = PDX(va); page->next = up->mmuused; up->mmuused = page; } old = vpt[VPTX(va)]; vpt[VPTX(va)] = pa|PTEUSER|PTEVALID; if(old&PTEVALID) flushpg(va); if(getcr3() != up->mmupdb->pa) print("bad cr3 %#.8lux %#.8lux\n", getcr3(), up->mmupdb->pa); splx(s); } /* * Double-check the user MMU. * Error checking only. */ void checkmmu(ulong va, ulong pa) { if(up->mmupdb == 0) return; if(!(vpd[PDX(va)]&PTEVALID) || !(vpt[VPTX(va)]&PTEVALID)) return; if(PPN(vpt[VPTX(va)]) != pa) print("%ld %s: va=%#08lux pa=%#08lux pte=%#08lux\n", up->pid, up->text, va, pa, vpt[VPTX(va)]); } /* * Walk the page-table pointed to by pdb and return a pointer * to the entry for virtual address va at the requested level. * If the entry is invalid and create isn't requested then bail * out early. Otherwise, for the 2nd level walk, allocate a new * page-table page and register it in the 1st level. This is used * only to edit kernel mappings, which use pages from kernel memory, * so it's okay to use KADDR to look at the tables. */ ulong* mmuwalk(ulong* pdb, ulong va, int level, int create) { ulong *table; void *map; table = &pdb[PDX(va)]; if(!(*table & PTEVALID) && create == 0) return 0; switch(level){ default: return 0; case 1: return table; case 2: if(*table & PTESIZE) panic("mmuwalk2: va %luX entry %luX\n", va, *table); if(!(*table & PTEVALID)){ /* * Have to call low-level allocator from * memory.c if we haven't set up the xalloc * tables yet. */ if(didmmuinit) map = xspanalloc(BY2PG, BY2PG, 0); else map = rampage(); if(map == nil) panic("mmuwalk xspanalloc failed"); *table = PADDR(map)|PTEWRITE|PTEVALID; } table = KADDR(PPN(*table)); return &table[PTX(va)]; } } /* * Device mappings are shared by all procs and processors and * live in the virtual range VMAP to VMAP+VMAPSIZE. The master * copy of the mappings is stored in mach0->pdb, and they are * paged in from there as necessary by vmapsync during faults. */ static Lock vmaplock; static int findhole(ulong *a, int n, int count); static ulong vmapalloc(ulong size); static void pdbunmap(ulong*, ulong, int); /* * Add a device mapping to the vmap range. */ void* vmap(ulong pa, int size) { int osize; ulong o, va; /* * might be asking for less than a page. */ osize = size; o = pa & (BY2PG-1); pa -= o; size += o; size = ROUND(size, BY2PG); if(pa == 0){ print("vmap pa=0 pc=%#p\n", getcallerpc(&pa)); return nil; } ilock(&vmaplock); if((va = vmapalloc(size)) == 0 || pdbmap(MACHP(0)->pdb, pa|PTEUNCACHED|PTEWRITE, va, size) < 0){ iunlock(&vmaplock); return 0; } iunlock(&vmaplock); /* avoid trap on local processor for(i=0; i %#.8lux\n", pa+o, osize, va+o); return (void*)(va + o); } static int findhole(ulong *a, int n, int count) { int have, i; have = 0; for(i=0; i= count) return i+1 - have; } return -1; } /* * Look for free space in the vmap. */ static ulong vmapalloc(ulong size) { int i, n, o; ulong *vpdb; int vpdbsize; vpdb = &MACHP(0)->pdb[PDX(VMAP)]; vpdbsize = VMAPSIZE/(4*MB); if(size >= 4*MB){ n = (size+4*MB-1) / (4*MB); if((o = findhole(vpdb, vpdbsize, n)) != -1) return VMAP + o*4*MB; return 0; } n = (size+BY2PG-1) / BY2PG; for(i=0; i VMAP+VMAPSIZE) panic("vunmap va=%#.8lux size=%#x pc=%#.8lux\n", va, size, getcallerpc(&va)); pdbunmap(MACHP(0)->pdb, va, size); /* * Flush mapping from all the tlbs and copied pdbs. * This can be (and is) slow, since it is called only rarely. * It is possible for vunmap to be called with up == nil, * e.g. from the reset/init driver routines during system * boot. In that case it suffices to flush the MACH(0) TLB * and return. */ if(!active.thunderbirdsarego){ putcr3(PADDR(MACHP(0)->pdb)); return; } for(i=0; istate == Dead) continue; if(p != up) p->newtlb = 1; } for(i=0; iflushmmu = 1; } flushmmu(); for(i=0; imachno)) && nm->flushmmu) ; } } /* * Add kernel mappings for pa -> va for a section of size bytes. */ int pdbmap(ulong *pdb, ulong pa, ulong va, int size) { int pse; ulong pgsz, *pte, *table; ulong flag, off; flag = pa&0xFFF; pa &= ~0xFFF; if((MACHP(0)->cpuiddx & 0x08) && (getcr4() & 0x10)) pse = 1; else pse = 0; for(off=0; off= 4MB and processor can do it. */ if(pse && (pa+off)%(4*MB) == 0 && (va+off)%(4*MB) == 0 && (size-off) >= 4*MB){ *table = (pa+off)|flag|PTESIZE|PTEVALID; pgsz = 4*MB; }else{ pte = mmuwalk(pdb, va+off, 2, 1); if(*pte&PTEVALID) panic("vmap: va=%#.8lux pa=%#.8lux pte=%#.8lux", va+off, pa+off, *pte); *pte = (pa+off)|flag|PTEVALID; pgsz = BY2PG; } } return 0; } /* * Remove mappings. Must already exist, for sanity. * Only used for kernel mappings, so okay to use KADDR. */ static void pdbunmap(ulong *pdb, ulong va, int size) { ulong vae; ulong *table; vae = va+size; while(va < vae){ table = &pdb[PDX(va)]; if(!(*table & PTEVALID)){ panic("vunmap: not mapped"); /* va = (va+4*MB-1) & ~(4*MB-1); continue; */ } if(*table & PTESIZE){ *table = 0; va = (va+4*MB-1) & ~(4*MB-1); continue; } table = KADDR(PPN(*table)); if(!(table[PTX(va)] & PTEVALID)) panic("vunmap: not mapped"); table[PTX(va)] = 0; va += BY2PG; } } /* * Handle a fault by bringing vmap up to date. * Only copy pdb entries and they never go away, * so no locking needed. */ int vmapsync(ulong va) { ulong entry, *table; if(va < VMAP || va >= VMAP+VMAPSIZE) return 0; entry = MACHP(0)->pdb[PDX(va)]; if(!(entry&PTEVALID)) return 0; if(!(entry&PTESIZE)){ /* make sure entry will help the fault */ table = KADDR(PPN(entry)); if(!(table[PTX(va)]&PTEVALID)) return 0; } vpd[PDX(va)] = entry; /* * TLB doesn't cache negative results, so no flush needed. */ return 1; } /* * KMap is used to map individual pages into virtual memory. * It is rare to have more than a few KMaps at a time (in the * absence of interrupts, only two at a time are ever used, * but interrupts can stack). The mappings are local to a process, * so we can use the same range of virtual address space for * all processes without any coordination. */ #define kpt (vpt+VPTX(KMAP)) #define NKPT (KMAPSIZE/BY2PG) KMap* kmap(Page *page) { int i, o, s; if(up == nil) panic("kmap: up=0 pc=%#.8lux", getcallerpc(&page)); if(up->mmupdb == nil) upallocpdb(); if(up->nkmap < 0) panic("kmap %lud %s: nkmap=%d", up->pid, up->text, up->nkmap); /* * Splhi shouldn't be necessary here, but paranoia reigns. * See comment in putmmu above. */ s = splhi(); up->nkmap++; if(!(vpd[PDX(KMAP)]&PTEVALID)){ /* allocate page directory */ if(KMAPSIZE > BY2XPG) panic("bad kmapsize"); if(up->kmaptable != nil) panic("kmaptable"); spllo(); up->kmaptable = newpage(0, 0, 0); splhi(); vpd[PDX(KMAP)] = up->kmaptable->pa|PTEWRITE|PTEVALID; flushpg((ulong)kpt); memset(kpt, 0, BY2PG); kpt[0] = page->pa|PTEWRITE|PTEVALID; up->lastkmap = 0; splx(s); return (KMap*)KMAP; } if(up->kmaptable == nil) panic("no kmaptable"); o = up->lastkmap+1; for(i=0; ipa|PTEWRITE|PTEVALID; up->lastkmap = o; splx(s); return (KMap*)(KMAP+o*BY2PG); } } panic("out of kmap"); return nil; } void kunmap(KMap *k) { ulong va; va = (ulong)k; if(up->mmupdb == nil || !(vpd[PDX(KMAP)]&PTEVALID)) panic("kunmap: no kmaps"); if(va < KMAP || va >= KMAP+KMAPSIZE) panic("kunmap: bad address %#.8lux pc=%#p", va, getcallerpc(&k)); if(!(vpt[VPTX(va)]&PTEVALID)) panic("kunmap: not mapped %#.8lux pc=%#p", va, getcallerpc(&k)); up->nkmap--; if(up->nkmap < 0) panic("kunmap %lud %s: nkmap=%d", up->pid, up->text, up->nkmap); vpt[VPTX(va)] = 0; flushpg(va); } /* * Temporary one-page mapping used to edit page directories. * * The fasttmp #define controls whether the code optimizes * the case where the page is already mapped in the physical * memory window. */ #define fasttmp 1 void* tmpmap(Page *p) { ulong i; ulong *entry; if(islo()) panic("tmpaddr: islo"); if(fasttmp && p->pa < -KZERO) return KADDR(p->pa); /* * PDX(TMPADDR) == PDX(MACHADDR), so this * entry is private to the processor and shared * between up->mmupdb (if any) and m->pdb. */ entry = &vpt[VPTX(TMPADDR)]; if(!(*entry&PTEVALID)){ for(i=KZERO; i<=CPU0MACH; i+=BY2PG) print("%#p: *%#p=%#p (vpt=%#p index=%#p)\n", i, &vpt[VPTX(i)], vpt[VPTX(i)], vpt, VPTX(i)); panic("tmpmap: no entry"); } if(PPN(*entry) != PPN(TMPADDR-KZERO)) panic("tmpmap: already mapped entry=%#.8lux", *entry); *entry = p->pa|PTEWRITE|PTEVALID; flushpg(TMPADDR); return (void*)TMPADDR; } void tmpunmap(void *v) { ulong *entry; if(islo()) panic("tmpaddr: islo"); if(fasttmp && (ulong)v >= KZERO && v != (void*)TMPADDR) return; if(v != (void*)TMPADDR) panic("tmpunmap: bad address"); entry = &vpt[VPTX(TMPADDR)]; if(!(*entry&PTEVALID) || PPN(*entry) == PPN(PADDR(TMPADDR))) panic("tmpmap: not mapped entry=%#.8lux", *entry); *entry = PPN(TMPADDR-KZERO)|PTEWRITE|PTEVALID; flushpg(TMPADDR); } /* * These could go back to being macros once the kernel is debugged, * but the extra checking is nice to have. */ void* kaddr(ulong pa) { if(pa > (ulong)-KZERO) panic("kaddr: pa=%#.8lux", pa); return (void*)(pa+KZERO); } ulong paddr(void *v) { ulong va; va = (ulong)v; if(va < KZERO) panic("paddr: va=%#.8lux pc=%#p", va, getcallerpc(&v)); return va-KZERO; } /* * More debugging. */ void countpagerefs(ulong *ref, int print) { int i, n; Mach *mm; Page *pg; Proc *p; n = 0; for(i=0; immupdb){ if(print){ if(ref[pagenumber(p->mmupdb)]) iprint("page %#.8lux is proc %d (pid %lud) pdb\n", p->mmupdb->pa, i, p->pid); continue; } if(ref[pagenumber(p->mmupdb)]++ == 0) n++; else iprint("page %#.8lux is proc %d (pid %lud) pdb but has other refs!\n", p->mmupdb->pa, i, p->pid); } if(p->kmaptable){ if(print){ if(ref[pagenumber(p->kmaptable)]) iprint("page %#.8lux is proc %d (pid %lud) kmaptable\n", p->kmaptable->pa, i, p->pid); continue; } if(ref[pagenumber(p->kmaptable)]++ == 0) n++; else iprint("page %#.8lux is proc %d (pid %lud) kmaptable but has other refs!\n", p->kmaptable->pa, i, p->pid); } for(pg=p->mmuused; pg; pg=pg->next){ if(print){ if(ref[pagenumber(pg)]) iprint("page %#.8lux is on proc %d (pid %lud) mmuused\n", pg->pa, i, p->pid); continue; } if(ref[pagenumber(pg)]++ == 0) n++; else iprint("page %#.8lux is on proc %d (pid %lud) mmuused but has other refs!\n", pg->pa, i, p->pid); } for(pg=p->mmufree; pg; pg=pg->next){ if(print){ if(ref[pagenumber(pg)]) iprint("page %#.8lux is on proc %d (pid %lud) mmufree\n", pg->pa, i, p->pid); continue; } if(ref[pagenumber(pg)]++ == 0) n++; else iprint("page %#.8lux is on proc %d (pid %lud) mmufree but has other refs!\n", pg->pa, i, p->pid); } } if(!print) iprint("%d pages in proc mmu\n", n); n = 0; for(i=0; ipdbpool; pg; pg=pg->next){ if(print){ if(ref[pagenumber(pg)]) iprint("page %#.8lux is in cpu%d pdbpool\n", pg->pa, i); continue; } if(ref[pagenumber(pg)]++ == 0) n++; else iprint("page %#.8lux is in cpu%d pdbpool but has other refs!\n", pg->pa, i); } } if(!print){ iprint("%d pages in mach pdbpools\n", n); for(i=0; ipdballoc, MACHP(i)->pdbfree); } } void checkfault(ulong, ulong) { } /* * Return the number of bytes that can be accessed via KADDR(pa). * If pa is not a valid argument to KADDR, return 0. */ ulong cankaddr(ulong pa) { if(pa >= -KZERO) return 0; return -KZERO - pa; }