123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150 |
- #include "all.h"
- char *errstr9p[MAXERR] =
- {
- [Ebadspc] "attach -- bad specifier",
- [Efid] "unknown fid",
- [Echar] "bad character in directory name",
- [Eopen] "read/write -- on non open fid",
- [Ecount] "read/write -- count too big",
- [Ealloc] "phase error -- directory entry not allocated",
- [Eqid] "phase error -- qid does not match",
- [Eaccess] "access permission denied",
- [Eentry] "directory entry not found",
- [Emode] "open/create -- unknown mode",
- [Edir1] "walk -- in a non-directory",
- [Edir2] "create -- in a non-directory",
- [Ephase] "phase error -- cannot happen",
- [Eexist] "create/wstat -- file exists",
- [Edot] "create/wstat -- . and .. illegal names",
- [Eempty] "remove -- directory not empty",
- [Ebadu] "attach -- unknown user or failed authentication",
- [Enoattach] "attach -- system maintenance",
- [Ewstatb] "wstat -- unknown bits in qid.type/mode",
- [Ewstatd] "wstat -- attempt to change directory",
- [Ewstatg] "wstat -- not in group",
- [Ewstatl] "wstat -- attempt to make length negative",
- [Ewstatm] "wstat -- attempt to change muid",
- [Ewstato] "wstat -- not owner or group leader",
- [Ewstatp] "wstat -- attempt to change qid.path",
- [Ewstatq] "wstat -- qid.type/dir.mode mismatch",
- [Ewstatu] "wstat -- not owner",
- [Ewstatv] "wstat -- attempt to change qid.vers",
- [Ename] "create/wstat -- bad character in file name",
- [Ewalk] "walk -- too many (system wide)",
- [Eronly] "file system read only",
- [Efull] "file system full",
- [Eoffset] "read/write -- offset negative",
- [Elocked] "open/create -- file is locked",
- [Ebroken] "read/write -- lock is broken",
- [Eauth] "attach -- authentication failed",
- [Eauth2] "read/write -- authentication unimplemented",
- [Etoolong] "name too long",
- [Efidinuse] "fid in use",
- [Econvert] "protocol botch",
- [Eversion] "version conversion",
- [Eauthnone] "auth -- user 'none' requires no authentication",
- [Eauthdisabled] "auth -- authentication disabled", /* development */
- [Eauthfile] "auth -- out of auth files",
- [Eedge] "at the bleeding edge", /* development */
- };
- char* wormscode[0x80] =
- {
- [0x00] "no sense",
- [0x01] "invalid command",
- [0x02] "recovered error",
- [0x03] "illegal request",
- [0x06] "unit attention",
- [0x07] "parity error",
- [0x08] "message reject error",
- [0x0a] "copy aborted",
- [0x0b] "initiator detected error",
- [0x0c] "select re-select failed",
- [0x0e] "miscompare",
- [0x10] "ecc trouble occurred",
- [0x11] "time out error",
- [0x12] "controller error",
- [0x13] "sony i/f II hardware/firmware error",
- [0x14] "scsi hardware/firmware error",
- [0x15] "rom version unmatched error",
- [0x16] "logical block address out of range",
- [0x20] "command not terminated",
- [0x21] "drive interface parity error",
- [0x22] "loading trouble",
- [0x23] "focus trouble",
- [0x24] "tracking trouble",
- [0x25] "spindle trouble",
- [0x26] "slide trouble",
- [0x27] "skew trouble",
- [0x28] "head lead out",
- [0x29] "write modulation trouble",
- [0x2a] "under laser power",
- [0x2b] "over laser power",
- [0x2f] "drive error",
- [0x30] "drive power off",
- [0x31] "no disk in drive",
- [0x32] "drive not ready",
- [0x38] "disk already exists in drive",
- [0x39] "no disk in shelf",
- [0x3a] "disk already exists in shelf",
- [0x40] "write warning",
- [0x41] "write error",
- [0x42] "disk error",
- [0x43] "cannot read disk ID",
- [0x44] "write protect error 1",
- [0x45] "write protect error 2",
- [0x46] "disk warning",
- [0x47] "alternation trouble",
- [0x50] "specified address not found",
- [0x51] "address block not found",
- [0x52] "all address could not be read",
- [0x53] "data could not be read",
- [0x54] "uncorrectable read error",
- [0x55] "tracking error",
- [0x56] "write servo error",
- [0x57] "write monitor error",
- [0x58] "write verify error",
- [0x60] "no data in specified address",
- [0x61] "blank check failed",
- [0x62] "controller diagnostics failed",
- [0x63] "drive diagnostice failed",
- [0x64] "diagnostice aborted",
- [0x67] "juke diagnostice failed",
- [0x68] "z-axis servo failed",
- [0x69] "roter servo error",
- [0x6a] "hook servo error",
- [0x6b] "I/O self error",
- [0x6c] "drive 0 error",
- [0x6d] "drive 1 error",
- [0x6e] "shelf error",
- [0x6f] "carrier error",
- [0x70] "rob made me do it",
- [0x71] "out of range",
- };
- char* tagnames[] =
- {
- [Tbuck] "Tbuck",
- [Tdir] "Tdir",
- [Tfile] "Tfile",
- [Tfree] "Tfree",
- [Tind1] "Tind1",
- [Tind2] "Tind2",
- #ifndef COMPAT32
- [Tind3] "Tind3",
- [Tind4] "Tind4",
- /* add more Tind tags here ... */
- #endif
- [Tnone] "Tnone",
- [Tsuper] "Tsuper",
- [Tvirgo] "Tvirgo",
- [Tcache] "Tcache",
- };
|