new compiler first working version

arm-build.sh

@@ -1,7 +1,9 @@
 #!/bin/sh
 
+# -mtune=cortex-a7 -mfpu=neon-vfpv4  -ftree-vectorize
+
 set -e
-GCC_OPTS=" -g -O2 -nostartfiles -nostdlib -mhard-float -ffreestanding -march=armv7-a -mtune=cortex-a7 -mfpu=neon-vfpv4 -ftree-vectorize -std=c11 -L../newlib/arm-none-eabi/lib/fpu -I../newlib/arm-none-eabi/include -I./bjos/rpi2/uspi/env/include "
+GCC_OPTS=" -g -O2 -nostartfiles -nostdlib -msoft-float -ffreestanding -fno-toplevel-reorder -march=armv5 -std=c11 -L../newlib/arm-none-eabi/lib -I../newlib/arm-none-eabi/include"
 
 # -Wcast-align
 
@@ -18,6 +20,7 @@ then
 
    $COMPILE -c -o obj/glue.o   lightning/glue.c
    $COMPILE -c -o obj/reader.o bjos/sledge/reader.c
+   $COMPILE -c -o obj/strmap.o bjos/sledge/strmap.c
    $COMPILE -c -o obj/alloc.o  bjos/sledge/alloc.c
    $COMPILE -c -o obj/blit.o   bjos/sledge/blit.c
    $COMPILE -c -o obj/writer.o bjos/sledge/writer.c
@@ -26,7 +29,7 @@ fi
 arm-none-eabi-objcopy -I binary -O elf32-littlearm -B arm  bjos/rootfs/unifont  obj/unifont.o
 arm-none-eabi-objcopy -I binary -O elf32-littlearm -B arm  bjos/rootfs/editor.l obj/editor.o
 
-$COMPILE -o build/bomberjacket-arm.elf bjos/rpi2/arm_start.S bjos/main_rpi2.c bjos/rpi2/rpi-boot/emmc.c bjos/rpi2/rpi-boot/block.c bjos/rpi2/rpi-boot/timer.c bjos/rpi2/rpi-boot/mbox.c bjos/rpi2/rpi-boot/fat.c bjos/rpi2/rpi-boot/libfs.c bjos/rpi2/rpi-boot/mbr.c   bjos/rpi2/raspi.c bjos/rpi2/r3d.c bjos/barrier.S -T bjos/arm.ld  obj/lightning.o obj/jit_names.o obj/jit_note.o obj/jit_size.o obj/jit_memory.o obj/glue.o obj/reader.o obj/alloc.o obj/blit.o obj/writer.o -lc -lgcc -lm obj/unifont.o obj/editor.o bjos/mini-ip.c   bjos/rpi2/uspi/lib/libuspi.a bjos/uspi_glue.c bjos/rpi2/uspi/env/lib/timer.c bjos/rpi2/uspi/env/lib/interrupt.c  bjos/rpi2/uspi/env/lib/memio.c  bjos/rpi2/uspi/env/lib/assert.c bjos/rpi2/uspi/env/lib/bcmpropertytags.c bjos/rpi2/uspi/env/lib/delayloop.S bjos/rpi2/uspi/env/lib/bcmmailbox.c bjos/rpi2/uspi/env/lib/exceptionstub.S   bjos/rpi2/uspi/env/lib/exceptionhandler.c
+$COMPILE -o build/bomberjacket-arm.elf bjos/rpi2/arm_start.S bjos/main_imx233.c bjos/imx233/imx233.c -T bjos/arm.ld  obj/lightning.o obj/jit_names.o obj/jit_note.o obj/jit_size.o obj/jit_memory.o obj/glue.o obj/reader.o obj/strmap.o obj/alloc.o obj/blit.o obj/writer.o -lc -lgcc -lm obj/editor.o bjos/mini-ip.c
 
-arm-none-eabi-objcopy build/bomberjacket-arm.elf -O binary build/kernel7.img
+arm-none-eabi-objcopy build/bomberjacket-arm.elf -O binary build/interim.imx
 

bjos/arm.ld

@@ -16,7 +16,7 @@ ENTRY(_start)
 SECTIONS
 {
 /* Starts at LOADER_ADDR. */
-. = 0x8000;
+. = 0x42000000;
 .text : {
 KEEP(*(.text.boot))
 *(.text)

bjos/imx233/arch/clock.h

@@ -0,0 +1,54 @@
+/*
+ * Freescale i.MX23/i.MX28 Clock
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_EMI_CLK,
+	MXC_GPMI_CLK,
+	MXC_IO0_CLK,
+	MXC_IO1_CLK,
+	MXC_XTAL_CLK,
+	MXC_SSP0_CLK,
+#ifdef CONFIG_MX28
+	MXC_SSP1_CLK,
+	MXC_SSP2_CLK,
+	MXC_SSP3_CLK,
+#endif
+};
+
+enum mxs_ioclock {
+	MXC_IOCLK0 = 0,
+	MXC_IOCLK1,
+};
+
+enum mxs_sspclock {
+	MXC_SSPCLK0 = 0,
+#ifdef CONFIG_MX28
+	MXC_SSPCLK1,
+	MXC_SSPCLK2,
+	MXC_SSPCLK3,
+#endif
+};
+
+uint32_t mxc_get_clock(enum mxc_clock clk);
+
+void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq);
+void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal);
+void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq);
+void mxs_set_lcdclk(uint32_t freq);
+
+/* Compatibility with the FEC Ethernet driver */
+#define	imx_get_fecclk()	mxc_get_clock(MXC_AHB_CLK)
+
+#endif	/* __CLOCK_H__ */

bjos/imx233/arch/gpio.h

@@ -0,0 +1,19 @@
+/*
+ * Freescale i.MX28 GPIO
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	__MX28_GPIO_H__
+#define	__MX28_GPIO_H__
+
+#ifdef	CONFIG_MXS_GPIO
+void mxs_gpio_init(void);
+#else
+inline void mxs_gpio_init(void) {}
+#endif
+
+#endif	/* __MX28_GPIO_H__ */

bjos/imx233/arch/imx-regs.h

@@ -0,0 +1,39 @@
+/*
+ * Freescale i.MX23/i.MX28 Registers
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __IMX_REGS_H__
+#define __IMX_REGS_H__
+
+#include <asm/imx-common/regs-apbh.h>
+#include <asm/arch/regs-base.h>
+#include <asm/imx-common/regs-bch.h>
+#include <asm/arch/regs-digctl.h>
+#include <asm/imx-common/regs-gpmi.h>
+#include <asm/arch/regs-i2c.h>
+#include <asm/arch/regs-lcdif.h>
+#include <asm/arch/regs-lradc.h>
+#include <asm/arch/regs-ocotp.h>
+#include <asm/arch/regs-pinctrl.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/regs-timrot.h>
+#include <asm/arch/regs-usb.h>
+#include <asm/arch/regs-usbphy.h>
+
+#ifdef CONFIG_MX23
+#include <asm/arch/regs-clkctrl-mx23.h>
+#include <asm/arch/regs-power-mx23.h>
+#endif
+
+#ifdef CONFIG_MX28
+#include <asm/arch/regs-clkctrl-mx28.h>
+#include <asm/arch/regs-power-mx28.h>
+#endif
+
+#endif	/* __IMX_REGS_H__ */

bjos/imx233/arch/iomux-mx23.h

@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX23_H__
+#define __MACH_IOMUX_MX23_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+
+#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
+
+#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
+
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
+#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
+#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX23_H__ */

bjos/imx233/arch/iomux-mx28.h

@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */

bjos/imx233/arch/iomux.h

@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK:		 0..2	(3)
+ * PAD_PIN:		 3..7	(5)
+ * PAD_MUXSEL:		 8..9	(2)
+ * PAD_MA:		10..11	(2)
+ * PAD_MA_VALID:	12	(1)
+ * PAD_VOL:		13	(1)
+ * PAD_VOL_VALID:	14	(1)
+ * PAD_PULL:		15	(1)
+ * PAD_PULL_VALID:	16	(1)
+ * RESERVED:		17..31	(15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT	0
+#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT	3
+#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT	8
+#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT	10
+#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT	12
+#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT	13
+#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT	14
+#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT	15
+#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0		0
+#define PAD_MUXSEL_1		1
+#define PAD_MUXSEL_2		2
+#define PAD_MUXSEL_GPIO		3
+
+#define PAD_4MA			0
+#define PAD_8MA			1
+#define PAD_12MA		2
+#define PAD_16MA		3
+
+#define PAD_1V8			0
+#if defined(CONFIG_MX28)
+#define PAD_3V3			1
+#else
+#define PAD_3V3			0
+#endif
+
+#define PAD_NOPULL		0
+#define PAD_PULLUP		1
+
+#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+
+/* generic pad control used in most cases */
+#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
+		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
+		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
+		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
+		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
+		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
+		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MACH_MXS_IOMUX_H__*/

bjos/imx233/arch/regs-base.h

@@ -0,0 +1,121 @@
+/*
+ * Freescale i.MX23/i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MXS_REGS_BASE_H__
+#define __MXS_REGS_BASE_H__
+
+/*
+ * Register base addresses for i.MX23
+ */
+#if defined(CONFIG_MX23)
+#define	MXS_ICOLL_BASE		0x80000000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_ECC8_BASE		0x80008000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_ETM_BASE		0x80014000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_EMI_BASE		0x80020000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_BASE		0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_TVENC_BASE		0x80038000
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_AUDIOOUT_BASE	0x80048000
+#define	MXS_AUDIOIN_BASE	0x8004C000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_RTC_BASE		0x8005C000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006C000
+#define	MXS_UARTAPP1_BASE	0x8006E000
+#define	MXS_UARTDBG_BASE	0x80070000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_DRAM_BASE		0x800E0000
+
+/*
+ * Register base addresses for i.MX28
+ */
+#elif defined(CONFIG_MX28)
+#define	MXS_ICOL_BASE		0x80000000
+#define	MXS_HSADC_BASE		0x80002000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_PERFMON_BASE	0x80006000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80012000
+#define	MXS_SSP2_BASE		0x80014000
+#define	MXS_SSP3_BASE		0x80016000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_ETM_BASE		0x80022000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_AHB0_BASE	0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_CAN0_BASE		0x80032000
+#define	MXS_CAN1_BASE		0x80034000
+#define	MXS_SIMDBG_BASE		0x8003C000
+#define	MXS_SIMGPMISEL_BASE	0x8003C200
+#define	MXS_SIMSSPSEL_BASE	0x8003C300
+#define	MXS_SIMMEMSEL_BASE	0x8003C400
+#define	MXS_GPIOMON_BASE	0x8003C500
+#define	MXS_SIMENET_BASE	0x8003C700
+#define	MXS_ARMJTAG_BASE	0x8003C800
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_RTC_BASE		0x80056000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_I2C1_BASE		0x8005A000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006A000
+#define	MXS_UARTAPP1_BASE	0x8006C000
+#define	MXS_UARTAPP2_BASE	0x8006E000
+#define	MXS_UARTAPP3_BASE	0x80070000
+#define	MXS_UARTAPP4_BASE	0x80072000
+#define	MXS_UARTDBG_BASE	0x80074000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBPHY1_BASE	0x8007E000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_USBCTRL1_BASE	0x80090000
+#define	MXS_DFLPT_BASE		0x800C0000
+#define	MXS_DRAM_BASE		0x800E0000
+#define	MXS_ENET0_BASE		0x800F0000
+#define	MXS_ENET1_BASE		0x800F4000
+#else
+#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28
+#endif
+
+#endif /* __MXS_REGS_BASE_H__ */

bjos/imx233/arch/regs-clkctrl-mx23.h

@@ -0,0 +1,208 @@
+/*
+ * Freescale i.MX23 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2012 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX23_REGS_CLKCTRL_H__
+#define __MX23_REGS_CLKCTRL_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_clkctrl_regs {
+	mxs_reg_32(hw_clkctrl_pll0ctrl0)	/* 0x00 */
+	uint32_t	hw_clkctrl_pll0ctrl1;	/* 0x10 */
+	uint32_t	reserved_pll0ctrl1[3];	/* 0x14-0x1c */
+	mxs_reg_32(hw_clkctrl_cpu)		/* 0x20 */
+	mxs_reg_32(hw_clkctrl_hbus)		/* 0x30 */
+	mxs_reg_32(hw_clkctrl_xbus)		/* 0x40 */
+	mxs_reg_32(hw_clkctrl_xtal)		/* 0x50 */
+	mxs_reg_32(hw_clkctrl_pix)		/* 0x60 */
+	mxs_reg_32(hw_clkctrl_ssp0)		/* 0x70 */
+	mxs_reg_32(hw_clkctrl_gpmi)		/* 0x80 */
+	mxs_reg_32(hw_clkctrl_spdif)		/* 0x90 */
+	mxs_reg_32(hw_clkctrl_emi)		/* 0xa0 */
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_clkctrl_saif0)		/* 0xc0 */
+	mxs_reg_32(hw_clkctrl_tv)		/* 0xd0 */
+	mxs_reg_32(hw_clkctrl_etm)		/* 0xe0 */
+	mxs_reg_8(hw_clkctrl_frac0)		/* 0xf0 */
+	mxs_reg_8(hw_clkctrl_frac1)		/* 0x100 */
+	mxs_reg_32(hw_clkctrl_clkseq)		/* 0x110 */
+	mxs_reg_32(hw_clkctrl_reset)		/* 0x120 */
+	mxs_reg_32(hw_clkctrl_status)		/* 0x130 */
+	mxs_reg_32(hw_clkctrl_version)		/* 0x140 */
+};
+#endif
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL0CTRL0_POWER			(1 << 16)
+
+#define	CLKCTRL_PLL0CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL0CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_CPU_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_CPU_BUSY_REF_CPU		(1 << 28)
+#define	CLKCTRL_CPU_DIV_XTAL_FRAC_EN		(1 << 26)
+#define	CLKCTRL_CPU_DIV_XTAL_MASK		(0x3ff << 16)
+#define	CLKCTRL_CPU_DIV_XTAL_OFFSET		16
+#define	CLKCTRL_CPU_INTERRUPT_WAIT		(1 << 12)
+#define	CLKCTRL_CPU_DIV_CPU_FRAC_EN		(1 << 10)
+#define	CLKCTRL_CPU_DIV_CPU_MASK		0x3f
+#define	CLKCTRL_CPU_DIV_CPU_OFFSET		0
+
+#define	CLKCTRL_HBUS_BUSY			(1 << 29)
+#define	CLKCTRL_HBUS_DCP_AS_ENABLE		(1 << 28)
+#define	CLKCTRL_HBUS_PXP_AS_ENABLE		(1 << 27)
+#define	CLKCTRL_HBUS_APBHDMA_AS_ENABLE		(1 << 26)
+#define	CLKCTRL_HBUS_APBXDMA_AS_ENABLE		(1 << 25)
+#define	CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	(1 << 24)
+#define	CLKCTRL_HBUS_TRAFFIC_AS_ENABLE		(1 << 23)
+#define	CLKCTRL_HBUS_CPU_DATA_AS_ENABLE		(1 << 22)
+#define	CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	(1 << 21)
+#define	CLKCTRL_HBUS_AUTO_SLOW_MODE		(1 << 20)
+#define	CLKCTRL_HBUS_SLOW_DIV_MASK		(0x7 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_OFFSET		16
+#define	CLKCTRL_HBUS_SLOW_DIV_BY1		(0x0 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY2		(0x1 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY4		(0x2 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY8		(0x3 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY16		(0x4 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY32		(0x5 << 16)
+#define	CLKCTRL_HBUS_DIV_FRAC_EN		(1 << 5)
+#define	CLKCTRL_HBUS_DIV_MASK			0x1f
+#define	CLKCTRL_HBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XBUS_BUSY			(1 << 31)
+#define	CLKCTRL_XBUS_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_XBUS_DIV_MASK			0x3ff
+#define	CLKCTRL_XBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XTAL_UART_CLK_GATE		(1 << 31)
+#define	CLKCTRL_XTAL_FILT_CLK24M_GATE		(1 << 30)
+#define	CLKCTRL_XTAL_PWM_CLK24M_GATE		(1 << 29)
+#define	CLKCTRL_XTAL_DRI_CLK24M_GATE		(1 << 28)
+#define	CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE		(1 << 27)
+#define	CLKCTRL_XTAL_TIMROT_CLK32K_GATE		(1 << 26)
+#define	CLKCTRL_XTAL_DIV_UART_MASK		0x3
+#define	CLKCTRL_XTAL_DIV_UART_OFFSET		0
+
+#define	CLKCTRL_PIX_CLKGATE			(1 << 31)
+#define	CLKCTRL_PIX_BUSY			(1 << 29)
+#define	CLKCTRL_PIX_DIV_FRAC_EN			(1 << 12)
+#define	CLKCTRL_PIX_DIV_MASK			0xfff
+#define	CLKCTRL_PIX_DIV_OFFSET			0
+
+#define	CLKCTRL_SSP_CLKGATE			(1 << 31)
+#define	CLKCTRL_SSP_BUSY			(1 << 29)
+#define	CLKCTRL_SSP_DIV_FRAC_EN			(1 << 9)
+#define	CLKCTRL_SSP_DIV_MASK			0x1ff
+#define	CLKCTRL_SSP_DIV_OFFSET			0
+
+#define	CLKCTRL_GPMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_GPMI_BUSY			(1 << 29)
+#define	CLKCTRL_GPMI_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_GPMI_DIV_MASK			0x3ff
+#define	CLKCTRL_GPMI_DIV_OFFSET			0
+
+#define	CLKCTRL_SPDIF_CLKGATE			(1 << 31)
+
+#define	CLKCTRL_EMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_EMI_SYNC_MODE_EN		(1 << 30)
+#define	CLKCTRL_EMI_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_EMI_BUSY_REF_EMI		(1 << 28)
+#define	CLKCTRL_EMI_BUSY_REF_CPU		(1 << 27)
+#define	CLKCTRL_EMI_BUSY_SYNC_MODE		(1 << 26)
+#define	CLKCTRL_EMI_BUSY_DCC_RESYNC		(1 << 17)
+#define	CLKCTRL_EMI_DCC_RESYNC_ENABLE		(1 << 16)
+#define	CLKCTRL_EMI_DIV_XTAL_MASK		(0xf << 8)
+#define	CLKCTRL_EMI_DIV_XTAL_OFFSET		8
+#define	CLKCTRL_EMI_DIV_EMI_MASK		0x3f
+#define	CLKCTRL_EMI_DIV_EMI_OFFSET		0
+
+#define	CLKCTRL_IR_CLKGATE			(1 << 31)
+#define	CLKCTRL_IR_AUTO_DIV			(1 << 29)
+#define	CLKCTRL_IR_IR_BUSY			(1 << 28)
+#define	CLKCTRL_IR_IROV_BUSY			(1 << 27)
+#define	CLKCTRL_IR_IROV_DIV_MASK		(0x1ff << 16)
+#define	CLKCTRL_IR_IROV_DIV_OFFSET		16
+#define	CLKCTRL_IR_IR_DIV_MASK			0x3ff
+#define	CLKCTRL_IR_IR_DIV_OFFSET		0
+
+#define	CLKCTRL_SAIF0_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF0_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF0_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF0_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF0_DIV_OFFSET		0
+
+#define	CLKCTRL_TV_CLK_TV108M_GATE		(1 << 31)
+#define	CLKCTRL_TV_CLK_TV_GATE			(1 << 30)
+
+#define	CLKCTRL_ETM_CLKGATE			(1 << 31)
+#define	CLKCTRL_ETM_BUSY			(1 << 29)
+#define	CLKCTRL_ETM_DIV_FRAC_EN			(1 << 6)
+#define	CLKCTRL_ETM_DIV_MASK			0x3f
+#define	CLKCTRL_ETM_DIV_OFFSET			0
+
+#define	CLKCTRL_FRAC_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CPU			0
+#define	CLKCTRL_FRAC0_EMI			1
+#define	CLKCTRL_FRAC0_PIX			2
+#define	CLKCTRL_FRAC0_IO0			3
+#define	CLKCTRL_FRAC1_VID			3
+
+#define	CLKCTRL_CLKSEQ_BYPASS_ETM		(1 << 8)
+#define	CLKCTRL_CLKSEQ_BYPASS_CPU		(1 << 7)
+#define	CLKCTRL_CLKSEQ_BYPASS_EMI		(1 << 6)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP0		(1 << 5)
+#define	CLKCTRL_CLKSEQ_BYPASS_GPMI		(1 << 4)
+#define	CLKCTRL_CLKSEQ_BYPASS_IR		(1 << 3)
+#define	CLKCTRL_CLKSEQ_BYPASS_PIX		(1 << 1)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF		(1 << 0)
+
+#define	CLKCTRL_RESET_CHIP			(1 << 1)
+#define	CLKCTRL_RESET_DIG			(1 << 0)
+
+#define	CLKCTRL_STATUS_CPU_LIMIT_MASK		(0x3 << 30)
+#define	CLKCTRL_STATUS_CPU_LIMIT_OFFSET		30
+
+#define	CLKCTRL_VERSION_MAJOR_MASK		(0xff << 24)
+#define	CLKCTRL_VERSION_MAJOR_OFFSET		24
+#define	CLKCTRL_VERSION_MINOR_MASK		(0xff << 16)
+#define	CLKCTRL_VERSION_MINOR_OFFSET		16
+#define	CLKCTRL_VERSION_STEP_MASK		0xffff
+#define	CLKCTRL_VERSION_STEP_OFFSET		0
+
+#endif /* __MX23_REGS_CLKCTRL_H__ */

bjos/imx233/arch/regs-clkctrl-mx28.h

@@ -0,0 +1,283 @@
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_CLKCTRL_H__
+#define __MX28_REGS_CLKCTRL_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_clkctrl_regs {
+	mxs_reg_32(hw_clkctrl_pll0ctrl0)	/* 0x00 */
+	uint32_t	hw_clkctrl_pll0ctrl1;	/* 0x10 */
+	uint32_t	reserved_pll0ctrl1[3];	/* 0x14-0x1c */
+	mxs_reg_32(hw_clkctrl_pll1ctrl0)	/* 0x20 */
+	uint32_t	hw_clkctrl_pll1ctrl1;	/* 0x30 */
+	uint32_t	reserved_pll1ctrl1[3];	/* 0x34-0x3c */
+	mxs_reg_32(hw_clkctrl_pll2ctrl0)	/* 0x40 */
+	mxs_reg_32(hw_clkctrl_cpu)		/* 0x50 */
+	mxs_reg_32(hw_clkctrl_hbus)		/* 0x60 */
+	mxs_reg_32(hw_clkctrl_xbus)		/* 0x70 */
+	mxs_reg_32(hw_clkctrl_xtal)		/* 0x80 */
+	mxs_reg_32(hw_clkctrl_ssp0)		/* 0x90 */
+	mxs_reg_32(hw_clkctrl_ssp1)		/* 0xa0 */
+	mxs_reg_32(hw_clkctrl_ssp2)		/* 0xb0 */
+	mxs_reg_32(hw_clkctrl_ssp3)		/* 0xc0 */
+	mxs_reg_32(hw_clkctrl_gpmi)		/* 0xd0 */
+	mxs_reg_32(hw_clkctrl_spdif)		/* 0xe0 */
+	mxs_reg_32(hw_clkctrl_emi)		/* 0xf0 */
+	mxs_reg_32(hw_clkctrl_saif0)		/* 0x100 */
+	mxs_reg_32(hw_clkctrl_saif1)		/* 0x110 */
+	mxs_reg_32(hw_clkctrl_lcdif)		/* 0x120 */
+	mxs_reg_32(hw_clkctrl_etm)		/* 0x130 */
+	mxs_reg_32(hw_clkctrl_enet)		/* 0x140 */
+	mxs_reg_32(hw_clkctrl_hsadc)		/* 0x150 */
+	mxs_reg_32(hw_clkctrl_flexcan)		/* 0x160 */
+
+	uint32_t	reserved[16];
+
+	mxs_reg_8(hw_clkctrl_frac0)		/* 0x1b0 */
+	mxs_reg_8(hw_clkctrl_frac1)		/* 0x1c0 */
+	mxs_reg_32(hw_clkctrl_clkseq)		/* 0x1d0 */
+	mxs_reg_32(hw_clkctrl_reset)		/* 0x1e0 */
+	mxs_reg_32(hw_clkctrl_status)		/* 0x1f0 */
+	mxs_reg_32(hw_clkctrl_version)		/* 0x200 */
+};
+#endif
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL0CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL0CTRL0_POWER			(1 << 17)
+
+#define	CLKCTRL_PLL0CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL0CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_PLL1CTRL0_CLKGATEEMI		(1 << 31)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT	(0x0 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2	(0x1 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05	(0x2 << 28)
+#define	CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED	(0x3 << 28)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT	(0x0 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2	(0x1 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05	(0x2 << 24)
+#define	CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED	(0x3 << 24)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_MASK		(0x3 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET	20
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT	(0x0 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER		(0x1 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST	(0x2 << 20)
+#define	CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED	(0x3 << 20)
+#define	CLKCTRL_PLL1CTRL0_EN_USB_CLKS		(1 << 18)
+#define	CLKCTRL_PLL1CTRL0_POWER			(1 << 17)
+
+#define	CLKCTRL_PLL1CTRL1_LOCK			(1 << 31)
+#define	CLKCTRL_PLL1CTRL1_FORCE_LOCK		(1 << 30)
+#define	CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK	0xffff
+#define	CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET	0
+
+#define	CLKCTRL_PLL2CTRL0_CLKGATE		(1 << 31)
+#define	CLKCTRL_PLL2CTRL0_LFR_SEL_MASK		(0x3 << 28)
+#define	CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET	28
+#define	CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	(1 << 26)
+#define	CLKCTRL_PLL2CTRL0_CP_SEL_MASK		(0x3 << 24)
+#define	CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET		24
+#define	CLKCTRL_PLL2CTRL0_POWER			(1 << 23)
+
+#define	CLKCTRL_CPU_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_CPU_BUSY_REF_CPU		(1 << 28)
+#define	CLKCTRL_CPU_DIV_XTAL_FRAC_EN		(1 << 26)
+#define	CLKCTRL_CPU_DIV_XTAL_MASK		(0x3ff << 16)
+#define	CLKCTRL_CPU_DIV_XTAL_OFFSET		16
+#define	CLKCTRL_CPU_INTERRUPT_WAIT		(1 << 12)
+#define	CLKCTRL_CPU_DIV_CPU_FRAC_EN		(1 << 10)
+#define	CLKCTRL_CPU_DIV_CPU_MASK		0x3f
+#define	CLKCTRL_CPU_DIV_CPU_OFFSET		0
+
+#define	CLKCTRL_HBUS_ASM_BUSY			(1 << 31)
+#define	CLKCTRL_HBUS_DCP_AS_ENABLE		(1 << 30)
+#define	CLKCTRL_HBUS_PXP_AS_ENABLE		(1 << 29)
+#define	CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	(1 << 27)
+#define	CLKCTRL_HBUS_APBHDMA_AS_ENABLE		(1 << 26)
+#define	CLKCTRL_HBUS_APBXDMA_AS_ENABLE		(1 << 25)
+#define	CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	(1 << 24)
+#define	CLKCTRL_HBUS_TRAFFIC_AS_ENABLE		(1 << 23)
+#define	CLKCTRL_HBUS_CPU_DATA_AS_ENABLE		(1 << 22)
+#define	CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	(1 << 21)
+#define	CLKCTRL_HBUS_ASM_ENABLE			(1 << 20)
+#define	CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	(1 << 19)
+#define	CLKCTRL_HBUS_SLOW_DIV_MASK		(0x7 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_OFFSET		16
+#define	CLKCTRL_HBUS_SLOW_DIV_BY1		(0x0 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY2		(0x1 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY4		(0x2 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY8		(0x3 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY16		(0x4 << 16)
+#define	CLKCTRL_HBUS_SLOW_DIV_BY32		(0x5 << 16)
+#define	CLKCTRL_HBUS_DIV_FRAC_EN		(1 << 5)
+#define	CLKCTRL_HBUS_DIV_MASK			0x1f
+#define	CLKCTRL_HBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XBUS_BUSY			(1 << 31)
+#define	CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	(1 << 11)
+#define	CLKCTRL_XBUS_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_XBUS_DIV_MASK			0x3ff
+#define	CLKCTRL_XBUS_DIV_OFFSET			0
+
+#define	CLKCTRL_XTAL_UART_CLK_GATE		(1 << 31)
+#define	CLKCTRL_XTAL_PWM_CLK24M_GATE		(1 << 29)
+#define	CLKCTRL_XTAL_TIMROT_CLK32K_GATE		(1 << 26)
+#define	CLKCTRL_XTAL_DIV_UART_MASK		0x3
+#define	CLKCTRL_XTAL_DIV_UART_OFFSET		0
+
+#define	CLKCTRL_SSP_CLKGATE			(1 << 31)
+#define	CLKCTRL_SSP_BUSY			(1 << 29)
+#define	CLKCTRL_SSP_DIV_FRAC_EN			(1 << 9)
+#define	CLKCTRL_SSP_DIV_MASK			0x1ff
+#define	CLKCTRL_SSP_DIV_OFFSET			0
+
+#define	CLKCTRL_GPMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_GPMI_BUSY			(1 << 29)
+#define	CLKCTRL_GPMI_DIV_FRAC_EN		(1 << 10)
+#define	CLKCTRL_GPMI_DIV_MASK			0x3ff
+#define	CLKCTRL_GPMI_DIV_OFFSET			0
+
+#define	CLKCTRL_SPDIF_CLKGATE			(1 << 31)
+
+#define	CLKCTRL_EMI_CLKGATE			(1 << 31)
+#define	CLKCTRL_EMI_SYNC_MODE_EN		(1 << 30)
+#define	CLKCTRL_EMI_BUSY_REF_XTAL		(1 << 29)
+#define	CLKCTRL_EMI_BUSY_REF_EMI		(1 << 28)
+#define	CLKCTRL_EMI_BUSY_REF_CPU		(1 << 27)
+#define	CLKCTRL_EMI_BUSY_SYNC_MODE		(1 << 26)
+#define	CLKCTRL_EMI_BUSY_DCC_RESYNC		(1 << 17)
+#define	CLKCTRL_EMI_DCC_RESYNC_ENABLE		(1 << 16)
+#define	CLKCTRL_EMI_DIV_XTAL_MASK		(0xf << 8)
+#define	CLKCTRL_EMI_DIV_XTAL_OFFSET		8
+#define	CLKCTRL_EMI_DIV_EMI_MASK		0x3f
+#define	CLKCTRL_EMI_DIV_EMI_OFFSET		0
+
+#define	CLKCTRL_SAIF0_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF0_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF0_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF0_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF0_DIV_OFFSET		0
+
+#define	CLKCTRL_SAIF1_CLKGATE			(1 << 31)
+#define	CLKCTRL_SAIF1_BUSY			(1 << 29)
+#define	CLKCTRL_SAIF1_DIV_FRAC_EN		(1 << 16)
+#define	CLKCTRL_SAIF1_DIV_MASK			0xffff
+#define	CLKCTRL_SAIF1_DIV_OFFSET		0
+
+#define	CLKCTRL_DIS_LCDIF_CLKGATE		(1 << 31)
+#define	CLKCTRL_DIS_LCDIF_BUSY			(1 << 29)
+#define	CLKCTRL_DIS_LCDIF_DIV_FRAC_EN		(1 << 13)
+#define	CLKCTRL_DIS_LCDIF_DIV_MASK		0x1fff
+#define	CLKCTRL_DIS_LCDIF_DIV_OFFSET		0
+
+#define	CLKCTRL_ETM_CLKGATE			(1 << 31)
+#define	CLKCTRL_ETM_BUSY			(1 << 29)
+#define	CLKCTRL_ETM_DIV_FRAC_EN			(1 << 7)
+#define	CLKCTRL_ETM_DIV_MASK			0x7f
+#define	CLKCTRL_ETM_DIV_OFFSET			0
+
+#define	CLKCTRL_ENET_SLEEP			(1 << 31)
+#define	CLKCTRL_ENET_DISABLE			(1 << 30)
+#define	CLKCTRL_ENET_STATUS			(1 << 29)
+#define	CLKCTRL_ENET_BUSY_TIME			(1 << 27)
+#define	CLKCTRL_ENET_DIV_TIME_MASK		(0x3f << 21)
+#define	CLKCTRL_ENET_DIV_TIME_OFFSET		21
+#define	CLKCTRL_ENET_TIME_SEL_MASK		(0x3 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_OFFSET		19
+#define	CLKCTRL_ENET_TIME_SEL_XTAL		(0x0 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_PLL		(0x1 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_RMII_CLK		(0x2 << 19)
+#define	CLKCTRL_ENET_TIME_SEL_UNDEFINED		(0x3 << 19)
+#define	CLKCTRL_ENET_CLK_OUT_EN			(1 << 18)
+#define	CLKCTRL_ENET_RESET_BY_SW_CHIP		(1 << 17)
+#define	CLKCTRL_ENET_RESET_BY_SW		(1 << 16)
+
+#define	CLKCTRL_HSADC_RESETB			(1 << 30)
+#define	CLKCTRL_HSADC_FREQDIV_MASK		(0x3 << 28)
+#define	CLKCTRL_HSADC_FREQDIV_OFFSET		28
+
+#define	CLKCTRL_FLEXCAN_STOP_CAN0		(1 << 30)
+#define	CLKCTRL_FLEXCAN_CAN0_STATUS		(1 << 29)
+#define	CLKCTRL_FLEXCAN_STOP_CAN1		(1 << 28)
+#define	CLKCTRL_FLEXCAN_CAN1_STATUS		(1 << 27)
+
+#define	CLKCTRL_FRAC_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CPU			0
+#define	CLKCTRL_FRAC0_EMI			1
+#define	CLKCTRL_FRAC0_IO1			2
+#define	CLKCTRL_FRAC0_IO0			3
+#define	CLKCTRL_FRAC1_PIX			0
+#define	CLKCTRL_FRAC1_HSADC			1
+#define	CLKCTRL_FRAC1_GPMI			2
+
+#define	CLKCTRL_CLKSEQ_BYPASS_CPU		(1 << 18)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF		(1 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS	(0x1 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD	(0x0 << 14)
+#define	CLKCTRL_CLKSEQ_BYPASS_ETM		(1 << 8)
+#define	CLKCTRL_CLKSEQ_BYPASS_EMI		(1 << 7)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP3		(1 << 6)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP2		(1 << 5)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP1		(1 << 4)
+#define	CLKCTRL_CLKSEQ_BYPASS_SSP0		(1 << 3)
+#define	CLKCTRL_CLKSEQ_BYPASS_GPMI		(1 << 2)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF1		(1 << 1)
+#define	CLKCTRL_CLKSEQ_BYPASS_SAIF0		(1 << 0)
+
+#define	CLKCTRL_RESET_WDOG_POR_DISABLE		(1 << 5)
+#define	CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	(1 << 4)
+#define	CLKCTRL_RESET_THERMAL_RESET_ENABLE	(1 << 3)
+#define	CLKCTRL_RESET_THERMAL_RESET_DEFAULT	(1 << 2)
+#define	CLKCTRL_RESET_CHIP			(1 << 1)
+#define	CLKCTRL_RESET_DIG			(1 << 0)
+
+#define	CLKCTRL_STATUS_CPU_LIMIT_MASK		(0x3 << 30)
+#define	CLKCTRL_STATUS_CPU_LIMIT_OFFSET		30
+
+#define	CLKCTRL_VERSION_MAJOR_MASK		(0xff << 24)
+#define	CLKCTRL_VERSION_MAJOR_OFFSET		24
+#define	CLKCTRL_VERSION_MINOR_MASK		(0xff << 16)
+#define	CLKCTRL_VERSION_MINOR_OFFSET		16
+#define	CLKCTRL_VERSION_STEP_MASK		0xffff
+#define	CLKCTRL_VERSION_STEP_OFFSET		0
+
+#endif /* __MX28_REGS_CLKCTRL_H__ */

bjos/imx233/arch/regs-digctl.h

@@ -0,0 +1,147 @@
+/*
+ * Freescale i.MX28 DIGCTL Register Definitions
+ *
+ * Copyright (C) 2012 Robert Delien <robert@delien.nl>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_DIGCTL_H__
+#define __MX28_REGS_DIGCTL_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_digctl_regs {
+	mxs_reg_32(hw_digctl_ctrl)				/* 0x000 */
+	mxs_reg_32(hw_digctl_status)				/* 0x010 */
+	mxs_reg_32(hw_digctl_hclkcount)			/* 0x020 */
+	mxs_reg_32(hw_digctl_ramctrl)				/* 0x030 */
+	mxs_reg_32(hw_digctl_emi_status)			/* 0x040 */
+	mxs_reg_32(hw_digctl_read_margin)			/* 0x050 */
+	uint32_t	hw_digctl_writeonce;			/* 0x060 */
+	uint32_t	reserved_writeonce[3];
+	mxs_reg_32(hw_digctl_bist_ctl)				/* 0x070 */
+	mxs_reg_32(hw_digctl_bist_status)			/* 0x080 */
+	uint32_t	hw_digctl_entropy;			/* 0x090 */
+	uint32_t	reserved_entropy[3];
+	uint32_t	hw_digctl_entropy_latched;		/* 0x0a0 */
+	uint32_t	reserved_entropy_latched[3];
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_digctl_microseconds)			/* 0x0c0 */
+	uint32_t	hw_digctl_dbgrd;			/* 0x0d0 */
+	uint32_t	reserved_hw_digctl_dbgrd[3];
+	uint32_t	hw_digctl_dbg;				/* 0x0e0 */
+	uint32_t	reserved_hw_digctl_dbg[3];
+
+	uint32_t	reserved2[4];
+
+	mxs_reg_32(hw_digctl_usb_loopback)			/* 0x100 */
+	mxs_reg_32(hw_digctl_ocram_status0)			/* 0x110 */
+	mxs_reg_32(hw_digctl_ocram_status1)			/* 0x120 */
+	mxs_reg_32(hw_digctl_ocram_status2)			/* 0x130 */
+	mxs_reg_32(hw_digctl_ocram_status3)			/* 0x140 */
+	mxs_reg_32(hw_digctl_ocram_status4)			/* 0x150 */
+	mxs_reg_32(hw_digctl_ocram_status5)			/* 0x160 */
+	mxs_reg_32(hw_digctl_ocram_status6)			/* 0x170 */
+	mxs_reg_32(hw_digctl_ocram_status7)			/* 0x180 */
+	mxs_reg_32(hw_digctl_ocram_status8)			/* 0x190 */
+	mxs_reg_32(hw_digctl_ocram_status9)			/* 0x1a0 */
+	mxs_reg_32(hw_digctl_ocram_status10)			/* 0x1b0 */
+	mxs_reg_32(hw_digctl_ocram_status11)			/* 0x1c0 */
+	mxs_reg_32(hw_digctl_ocram_status12)			/* 0x1d0 */
+	mxs_reg_32(hw_digctl_ocram_status13)			/* 0x1e0 */
+
+	uint32_t	reserved3[36];
+
+	uint32_t	hw_digctl_scratch0;			/* 0x280 */
+	uint32_t	reserved_hw_digctl_scratch0[3];
+	uint32_t	hw_digctl_scratch1;			/* 0x290 */
+	uint32_t	reserved_hw_digctl_scratch1[3];
+	uint32_t	hw_digctl_armcache;			/* 0x2a0 */
+	uint32_t	reserved_hw_digctl_armcache[3];
+	mxs_reg_32(hw_digctl_debug_trap)			/* 0x2b0 */
+	uint32_t	hw_digctl_debug_trap_l0_addr_low;	/* 0x2c0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l0_addr_low[3];
+	uint32_t	hw_digctl_debug_trap_l0_addr_high;	/* 0x2d0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l0_addr_high[3];
+	uint32_t	hw_digctl_debug_trap_l3_addr_low;	/* 0x2e0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l3_addr_low[3];
+	uint32_t	hw_digctl_debug_trap_l3_addr_high;	/* 0x2f0 */
+	uint32_t	reserved_hw_digctl_debug_trap_l3_addr_high[3];
+	uint32_t	hw_digctl_fsl;				/* 0x300 */
+	uint32_t	reserved_hw_digctl_fsl[3];
+	uint32_t	hw_digctl_chipid;			/* 0x310 */
+	uint32_t	reserved_hw_digctl_chipid[3];
+
+	uint32_t	reserved4[4];
+
+	uint32_t	hw_digctl_ahb_stats_select;		/* 0x330 */
+	uint32_t	reserved_hw_digctl_ahb_stats_select[3];
+
+	uint32_t	reserved5[12];
+
+	uint32_t	hw_digctl_l1_ahb_active_cycles;		/* 0x370 */
+	uint32_t	reserved_hw_digctl_l1_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l1_ahb_data_stalled;		/* 0x380 */
+	uint32_t	reserved_hw_digctl_l1_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l1_ahb_data_cycles;		/* 0x390 */
+	uint32_t	reserved_hw_digctl_l1_ahb_data_cycles[3];
+	uint32_t	hw_digctl_l2_ahb_active_cycles;		/* 0x3a0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l2_ahb_data_stalled;		/* 0x3b0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l2_ahb_data_cycles;		/* 0x3c0 */
+	uint32_t	reserved_hw_digctl_l2_ahb_data_cycles[3];
+	uint32_t	hw_digctl_l3_ahb_active_cycles;		/* 0x3d0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_active_cycles[3];
+	uint32_t	hw_digctl_l3_ahb_data_stalled;		/* 0x3e0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_data_stalled[3];
+	uint32_t	hw_digctl_l3_ahb_data_cycles;		/* 0x3f0 */
+	uint32_t	reserved_hw_digctl_l3_ahb_data_cycles[3];
+
+	uint32_t	reserved6[64];
+
+	uint32_t	hw_digctl_mpte0_loc;			/* 0x500 */
+	uint32_t	reserved_hw_digctl_mpte0_loc[3];
+	uint32_t	hw_digctl_mpte1_loc;			/* 0x510 */
+	uint32_t	reserved_hw_digctl_mpte1_loc[3];
+	uint32_t	hw_digctl_mpte2_loc;			/* 0x520 */
+	uint32_t	reserved_hw_digctl_mpte2_loc[3];
+	uint32_t	hw_digctl_mpte3_loc;			/* 0x530 */
+	uint32_t	reserved_hw_digctl_mpte3_loc[3];
+	uint32_t	hw_digctl_mpte4_loc;			/* 0x540 */
+	uint32_t	reserved_hw_digctl_mpte4_loc[3];
+	uint32_t	hw_digctl_mpte5_loc;			/* 0x550 */
+	uint32_t	reserved_hw_digctl_mpte5_loc[3];
+	uint32_t	hw_digctl_mpte6_loc;			/* 0x560 */
+	uint32_t	reserved_hw_digctl_mpte6_loc[3];
+	uint32_t	hw_digctl_mpte7_loc;			/* 0x570 */
+	uint32_t	reserved_hw_digctl_mpte7_loc[3];
+	uint32_t	hw_digctl_mpte8_loc;			/* 0x580 */
+	uint32_t	reserved_hw_digctl_mpte8_loc[3];
+	uint32_t	hw_digctl_mpte9_loc;			/* 0x590 */
+	uint32_t	reserved_hw_digctl_mpte9_loc[3];
+	uint32_t	hw_digctl_mpte10_loc;			/* 0x5a0 */
+	uint32_t	reserved_hw_digctl_mpte10_loc[3];
+	uint32_t	hw_digctl_mpte11_loc;			/* 0x5b0 */
+	uint32_t	reserved_hw_digctl_mpte11_loc[3];
+	uint32_t	hw_digctl_mpte12_loc;			/* 0x5c0 */
+	uint32_t	reserved_hw_digctl_mpte12_loc[3];
+	uint32_t	hw_digctl_mpte13_loc;			/* 0x5d0 */
+	uint32_t	reserved_hw_digctl_mpte13_loc[3];
+	uint32_t	hw_digctl_mpte14_loc;			/* 0x5e0 */
+	uint32_t	reserved_hw_digctl_mpte14_loc[3];
+	uint32_t	hw_digctl_mpte15_loc;			/* 0x5f0 */
+	uint32_t	reserved_hw_digctl_mpte15_loc[3];
+};
+#endif
+
+/* Product code identification */
+#define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
+#define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
+#define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)
+
+#endif /* __MX28_REGS_DIGCTL_H__ */

bjos/imx233/arch/regs-i2c.h

@@ -0,0 +1,194 @@
+/*
+ * Freescale i.MX28 I2C Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_I2C_H__
+#define __MX28_REGS_I2C_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_i2c_regs {
+	mxs_reg_32(hw_i2c_ctrl0)
+	mxs_reg_32(hw_i2c_timing0)
+	mxs_reg_32(hw_i2c_timing1)
+	mxs_reg_32(hw_i2c_timing2)
+	mxs_reg_32(hw_i2c_ctrl1)
+	mxs_reg_32(hw_i2c_stat)
+	mxs_reg_32(hw_i2c_queuectrl)
+	mxs_reg_32(hw_i2c_queuestat)
+	mxs_reg_32(hw_i2c_queuecmd)
+	mxs_reg_32(hw_i2c_queuedata)
+	mxs_reg_32(hw_i2c_data)
+	mxs_reg_32(hw_i2c_debug0)
+	mxs_reg_32(hw_i2c_debug1)
+	mxs_reg_32(hw_i2c_version)
+};
+#endif
+
+#define	I2C_CTRL_SFTRST				(1 << 31)
+#define	I2C_CTRL_CLKGATE			(1 << 30)
+#define	I2C_CTRL_RUN				(1 << 29)
+#define	I2C_CTRL_PREACK				(1 << 27)
+#define	I2C_CTRL_ACKNOWLEDGE			(1 << 26)
+#define	I2C_CTRL_SEND_NAK_ON_LAST		(1 << 25)
+#define	I2C_CTRL_MULTI_MASTER			(1 << 23)
+#define	I2C_CTRL_CLOCK_HELD			(1 << 22)
+#define	I2C_CTRL_RETAIN_CLOCK			(1 << 21)
+#define	I2C_CTRL_POST_SEND_STOP			(1 << 20)
+#define	I2C_CTRL_PRE_SEND_START			(1 << 19)
+#define	I2C_CTRL_SLAVE_ADDRESS_ENABLE		(1 << 18)
+#define	I2C_CTRL_MASTER_MODE			(1 << 17)
+#define	I2C_CTRL_DIRECTION			(1 << 16)
+#define	I2C_CTRL_XFER_COUNT_MASK		0xffff
+#define	I2C_CTRL_XFER_COUNT_OFFSET		0
+
+#define	I2C_TIMING0_HIGH_COUNT_MASK		(0x3ff << 16)
+#define	I2C_TIMING0_HIGH_COUNT_OFFSET		16
+#define	I2C_TIMING0_RCV_COUNT_MASK		0x3ff
+#define	I2C_TIMING0_RCV_COUNT_OFFSET		0
+
+#define	I2C_TIMING1_LOW_COUNT_MASK		(0x3ff << 16)
+#define	I2C_TIMING1_LOW_COUNT_OFFSET		16
+#define	I2C_TIMING1_XMIT_COUNT_MASK		0x3ff
+#define	I2C_TIMING1_XMIT_COUNT_OFFSET		0
+
+#define	I2C_TIMING2_BUS_FREE_MASK		(0x3ff << 16)
+#define	I2C_TIMING2_BUS_FREE_OFFSET		16
+#define	I2C_TIMING2_LEADIN_COUNT_MASK		0x3ff
+#define	I2C_TIMING2_LEADIN_COUNT_OFFSET		0
+
+#define	I2C_CTRL1_RD_QUEUE_IRQ			(1 << 30)
+#define	I2C_CTRL1_WR_QUEUE_IRQ			(1 << 29)
+#define	I2C_CTRL1_CLR_GOT_A_NAK			(1 << 28)
+#define	I2C_CTRL1_ACK_MODE			(1 << 27)
+#define	I2C_CTRL1_FORCE_DATA_IDLE		(1 << 26)
+#define	I2C_CTRL1_FORCE_CLK_IDLE		(1 << 25)
+#define	I2C_CTRL1_BCAST_SLAVE_EN		(1 << 24)
+#define	I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK	(0xff << 16)
+#define	I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET	16
+#define	I2C_CTRL1_BUS_FREE_IRQ_EN		(1 << 15)
+#define	I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN	(1 << 14)
+#define	I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN		(1 << 13)
+#define	I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN	(1 << 12)
+#define	I2C_CTRL1_EARLY_TERM_IRQ_EN		(1 << 11)
+#define	I2C_CTRL1_MASTER_LOSS_IRQ_EN		(1 << 10)
+#define	I2C_CTRL1_SLAVE_STOP_IRQ_EN		(1 << 9)
+#define	I2C_CTRL1_SLAVE_IRQ_EN			(1 << 8)
+#define	I2C_CTRL1_BUS_FREE_IRQ			(1 << 7)
+#define	I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ		(1 << 6)
+#define	I2C_CTRL1_NO_SLAVE_ACK_IRQ		(1 << 5)
+#define	I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	(1 << 4)
+#define	I2C_CTRL1_EARLY_TERM_IRQ		(1 << 3)
+#define	I2C_CTRL1_MASTER_LOSS_IRQ		(1 << 2)
+#define	I2C_CTRL1_SLAVE_STOP_IRQ		(1 << 1)
+#define	I2C_CTRL1_SLAVE_IRQ			(1 << 0)
+
+#define	I2C_STAT_MASTER_PRESENT			(1 << 31)
+#define	I2C_STAT_SLAVE_PRESENT			(1 << 30)
+#define	I2C_STAT_ANY_ENABLED_IRQ		(1 << 29)
+#define	I2C_STAT_GOT_A_NAK			(1 << 28)
+#define	I2C_STAT_RCVD_SLAVE_ADDR_MASK		(0xff << 16)
+#define	I2C_STAT_RCVD_SLAVE_ADDR_OFFSET		16
+#define	I2C_STAT_SLAVE_ADDR_EQ_ZERO		(1 << 15)
+#define	I2C_STAT_SLAVE_FOUND			(1 << 14)
+#define	I2C_STAT_SLAVE_SEARCHING		(1 << 13)
+#define	I2C_STAT_DATA_ENGING_DMA_WAIT		(1 << 12)
+#define	I2C_STAT_BUS_BUSY			(1 << 11)
+#define	I2C_STAT_CLK_GEN_BUSY			(1 << 10)
+#define	I2C_STAT_DATA_ENGINE_BUSY		(1 << 9)
+#define	I2C_STAT_SLAVE_BUSY			(1 << 8)
+#define	I2C_STAT_BUS_FREE_IRQ_SUMMARY		(1 << 7)
+#define	I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY	(1 << 6)
+#define	I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY	(1 << 5)
+#define	I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY	(1 << 4)
+#define	I2C_STAT_EARLY_TERM_IRQ_SUMMARY		(1 << 3)
+#define	I2C_STAT_MASTER_LOSS_IRQ_SUMMARY	(1 << 2)
+#define	I2C_STAT_SLAVE_STOP_IRQ_SUMMARY		(1 << 1)
+#define	I2C_STAT_SLAVE_IRQ_SUMMARY		(1 << 0)
+
+#define	I2C_QUEUECTRL_RD_THRESH_MASK		(0x1f << 16)
+#define	I2C_QUEUECTRL_RD_THRESH_OFFSET		16
+#define	I2C_QUEUECTRL_WR_THRESH_MASK		(0x1f << 8)
+#define	I2C_QUEUECTRL_WR_THRESH_OFFSET		8
+#define	I2C_QUEUECTRL_QUEUE_RUN			(1 << 5)
+#define	I2C_QUEUECTRL_RD_CLEAR			(1 << 4)
+#define	I2C_QUEUECTRL_WR_CLEAR			(1 << 3)
+#define	I2C_QUEUECTRL_PIO_QUEUE_MODE		(1 << 2)
+#define	I2C_QUEUECTRL_RD_QUEUE_IRQ_EN		(1 << 1)
+#define	I2C_QUEUECTRL_WR_QUEUE_IRQ_EN		(1 << 0)
+
+#define	I2C_QUEUESTAT_RD_QUEUE_FULL		(1 << 14)
+#define	I2C_QUEUESTAT_RD_QUEUE_EMPTY		(1 << 13)
+#define	I2C_QUEUESTAT_RD_QUEUE_CNT_MASK		(0x1f << 8)
+#define	I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET	8
+#define	I2C_QUEUESTAT_WR_QUEUE_FULL		(1 << 6)
+#define	I2C_QUEUESTAT_WR_QUEUE_EMPTY		(1 << 5)
+#define	I2C_QUEUESTAT_WR_QUEUE_CNT_MASK		0x1f
+#define	I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET	0
+
+#define	I2C_QUEUECMD_PREACK			(1 << 27)
+#define	I2C_QUEUECMD_ACKNOWLEDGE		(1 << 26)
+#define	I2C_QUEUECMD_SEND_NAK_ON_LAST		(1 << 25)
+#define	I2C_QUEUECMD_MULTI_MASTER		(1 << 23)
+#define	I2C_QUEUECMD_CLOCK_HELD			(1 << 22)
+#define	I2C_QUEUECMD_RETAIN_CLOCK		(1 << 21)
+#define	I2C_QUEUECMD_POST_SEND_STOP		(1 << 20)
+#define	I2C_QUEUECMD_PRE_SEND_START		(1 << 19)
+#define	I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE	(1 << 18)
+#define	I2C_QUEUECMD_MASTER_MODE		(1 << 17)
+#define	I2C_QUEUECMD_DIRECTION			(1 << 16)
+#define	I2C_QUEUECMD_XFER_COUNT_MASK		0xffff
+#define	I2C_QUEUECMD_XFER_COUNT_OFFSET		0
+
+#define	I2C_QUEUEDATA_DATA_MASK			0xffffffff
+#define	I2C_QUEUEDATA_DATA_OFFSET		0
+
+#define	I2C_DATA_DATA_MASK			0xffffffff
+#define	I2C_DATA_DATA_OFFSET			0
+
+#define	I2C_DEBUG0_DMAREQ			(1 << 31)
+#define	I2C_DEBUG0_DMAENDCMD			(1 << 30)
+#define	I2C_DEBUG0_DMAKICK			(1 << 29)
+#define	I2C_DEBUG0_DMATERMINATE			(1 << 28)
+#define	I2C_DEBUG0_STATE_VALUE_MASK		(0x3 << 26)
+#define	I2C_DEBUG0_STATE_VALUE_OFFSET		26
+#define	I2C_DEBUG0_DMA_STATE_MASK		(0x3ff << 16)
+#define	I2C_DEBUG0_DMA_STATE_OFFSET		16
+#define	I2C_DEBUG0_START_TOGGLE			(1 << 15)
+#define	I2C_DEBUG0_STOP_TOGGLE			(1 << 14)
+#define	I2C_DEBUG0_GRAB_TOGGLE			(1 << 13)
+#define	I2C_DEBUG0_CHANGE_TOGGLE		(1 << 12)
+#define	I2C_DEBUG0_STATE_LATCH			(1 << 11)
+#define	I2C_DEBUG0_SLAVE_HOLD_CLK		(1 << 10)
+#define	I2C_DEBUG0_STATE_STATE_MASK		0x3ff
+#define	I2C_DEBUG0_STATE_STATE_OFFSET		0
+
+#define	I2C_DEBUG1_I2C_CLK_IN			(1 << 31)
+#define	I2C_DEBUG1_I2C_DATA_IN			(1 << 30)
+#define	I2C_DEBUG1_DMA_BYTE_ENABLES_MASK	(0xf << 24)
+#define	I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET	24
+#define	I2C_DEBUG1_CLK_GEN_STATE_MASK		(0xff << 16)
+#define	I2C_DEBUG1_CLK_GEN_STATE_OFFSET		16
+#define	I2C_DEBUG1_LST_MODE_MASK		(0x3 << 9)
+#define	I2C_DEBUG1_LST_MODE_OFFSET		9
+#define	I2C_DEBUG1_LOCAL_SLAVE_TEST		(1 << 8)
+#define	I2C_DEBUG1_FORCE_CLK_ON			(1 << 4)
+#define	I2C_DEBUG1_FORCE_ABR_LOSS		(1 << 3)
+#define	I2C_DEBUG1_FORCE_RCV_ACK		(1 << 2)
+#define	I2C_DEBUG1_FORCE_I2C_DATA_OE		(1 << 1)
+#define	I2C_DEBUG1_FORCE_I2C_CLK_OE		(1 << 0)
+
+#define	I2C_VERSION_MAJOR_MASK			(0xff << 24)
+#define	I2C_VERSION_MAJOR_OFFSET		24
+#define	I2C_VERSION_MINOR_MASK			(0xff << 16)
+#define	I2C_VERSION_MINOR_OFFSET		16
+#define	I2C_VERSION_STEP_MASK			0xffff
+#define	I2C_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX28_REGS_I2C_H__ */

bjos/imx233/arch/regs-lcdif.h

@@ -0,0 +1,217 @@
+/*
+ * Freescale i.MX28 LCDIF Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_LCDIF_H__
+#define __MX28_REGS_LCDIF_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_lcdif_regs {
+	mxs_reg_32(hw_lcdif_ctrl)		/* 0x00 */
+	mxs_reg_32(hw_lcdif_ctrl1)		/* 0x10 */
+#if defined(CONFIG_MX28)
+	mxs_reg_32(hw_lcdif_ctrl2)		/* 0x20 */
+#endif
+	mxs_reg_32(hw_lcdif_transfer_count)	/* 0x20/0x30 */
+	mxs_reg_32(hw_lcdif_cur_buf)		/* 0x30/0x40 */
+	mxs_reg_32(hw_lcdif_next_buf)		/* 0x40/0x50 */
+
+#if defined(CONFIG_MX23)
+	uint32_t	reserved1[4];
+#endif
+
+	mxs_reg_32(hw_lcdif_timing)		/* 0x60 */
+	mxs_reg_32(hw_lcdif_vdctrl0)		/* 0x70 */
+	mxs_reg_32(hw_lcdif_vdctrl1)		/* 0x80 */
+	mxs_reg_32(hw_lcdif_vdctrl2)		/* 0x90 */
+	mxs_reg_32(hw_lcdif_vdctrl3)		/* 0xa0 */
+	mxs_reg_32(hw_lcdif_vdctrl4)		/* 0xb0 */
+	mxs_reg_32(hw_lcdif_dvictrl0)		/* 0xc0 */
+	mxs_reg_32(hw_lcdif_dvictrl1)		/* 0xd0 */
+	mxs_reg_32(hw_lcdif_dvictrl2)		/* 0xe0 */
+	mxs_reg_32(hw_lcdif_dvictrl3)		/* 0xf0 */
+	mxs_reg_32(hw_lcdif_dvictrl4)		/* 0x100 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl0)	/* 0x110 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl1)	/* 0x120 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl2)	/* 0x130 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl3)	/* 0x140 */
+	mxs_reg_32(hw_lcdif_csc_coeffctrl4)	/* 0x150 */
+	mxs_reg_32(hw_lcdif_csc_offset)	/* 0x160 */
+	mxs_reg_32(hw_lcdif_csc_limit)		/* 0x170 */
+
+#if defined(CONFIG_MX23)
+	uint32_t	reserved2[12];
+#endif
+	mxs_reg_32(hw_lcdif_data)		/* 0x1b0/0x180 */
+	mxs_reg_32(hw_lcdif_bm_error_stat)	/* 0x1c0/0x190 */
+#if defined(CONFIG_MX28)
+	mxs_reg_32(hw_lcdif_crc_stat)		/* 0x1a0 */
+#endif
+	mxs_reg_32(hw_lcdif_lcdif_stat)		/* 0x1d0/0x1b0 */
+	mxs_reg_32(hw_lcdif_version)		/* 0x1e0/0x1c0 */
+	mxs_reg_32(hw_lcdif_debug0)		/* 0x1f0/0x1d0 */
+	mxs_reg_32(hw_lcdif_debug1)		/* 0x200/0x1e0 */
+	mxs_reg_32(hw_lcdif_debug2)		/* 0x1f0 */
+};
+#endif
+
+#define	LCDIF_CTRL_SFTRST					(1 << 31)
+#define	LCDIF_CTRL_CLKGATE					(1 << 30)
+#define	LCDIF_CTRL_YCBCR422_INPUT				(1 << 29)
+#define	LCDIF_CTRL_READ_WRITEB					(1 << 28)
+#define	LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE				(1 << 27)
+#define	LCDIF_CTRL_DATA_SHIFT_DIR				(1 << 26)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_MASK				(0x1f << 21)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_OFFSET			21
+#define	LCDIF_CTRL_DVI_MODE					(1 << 20)
+#define	LCDIF_CTRL_BYPASS_COUNT					(1 << 19)
+#define	LCDIF_CTRL_VSYNC_MODE					(1 << 18)
+#define	LCDIF_CTRL_DOTCLK_MODE					(1 << 17)
+#define	LCDIF_CTRL_DATA_SELECT					(1 << 16)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_MASK			(0x3 << 14)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_OFFSET			14
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_MASK			(0x3 << 12)
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_OFFSET			12
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK			(0x3 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_OFFSET			10
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT			(0 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT			(1 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT			(2 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT			(3 << 10)
+#define	LCDIF_CTRL_WORD_LENGTH_MASK				(0x3 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_OFFSET				8
+#define	LCDIF_CTRL_WORD_LENGTH_16BIT				(0 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_8BIT				(1 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_18BIT				(2 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_24BIT				(3 << 8)
+#define	LCDIF_CTRL_RGB_TO_YCBCR422_CSC				(1 << 7)
+#define	LCDIF_CTRL_LCDIF_MASTER					(1 << 5)
+#define	LCDIF_CTRL_DATA_FORMAT_16_BIT				(1 << 3)
+#define	LCDIF_CTRL_DATA_FORMAT_18_BIT				(1 << 2)
+#define	LCDIF_CTRL_DATA_FORMAT_24_BIT				(1 << 1)
+#define	LCDIF_CTRL_RUN						(1 << 0)
+
+#define	LCDIF_CTRL1_COMBINE_MPU_WR_STRB				(1 << 27)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ_EN				(1 << 26)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ				(1 << 25)
+#define	LCDIF_CTRL1_RECOVER_ON_UNDERFLOW			(1 << 24)
+#define	LCDIF_CTRL1_INTERLACE_FIELDS				(1 << 23)
+#define	LCDIF_CTRL1_START_INTERLACE_FROM_SECOND_FIELD		(1 << 22)
+#define	LCDIF_CTRL1_FIFO_CLEAR					(1 << 21)
+#define	LCDIF_CTRL1_IRQ_ON_ALTERNATE_FIELDS			(1 << 20)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_MASK			(0xf << 16)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET			16
+#define	LCDIF_CTRL1_OVERFLOW_IRQ_EN				(1 << 15)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ_EN				(1 << 14)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ_EN			(1 << 13)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN				(1 << 12)
+#define	LCDIF_CTRL1_OVERFLOW_IRQ				(1 << 11)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ				(1 << 10)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ				(1 << 9)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ				(1 << 8)
+#define	LCDIF_CTRL1_BUSY_ENABLE					(1 << 2)
+#define	LCDIF_CTRL1_MODE86					(1 << 1)
+#define	LCDIF_CTRL1_RESET					(1 << 0)
+
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_MASK			(0x7 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_OFFSET			21
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_1			(0x0 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_2			(0x1 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_4			(0x2 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_8			(0x3 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_16			(0x4 << 21)
+#define	LCDIF_CTRL2_BURST_LEN_8					(1 << 20)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_MASK			(0x7 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_OFFSET			16
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RGB			(0x0 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RBG			(0x1 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GBR			(0x2 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GRB			(0x3 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BRG			(0x4 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BGR			(0x5 << 16)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_MASK			(0x7 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_OFFSET			12
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RGB			(0x0 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RBG			(0x1 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GBR			(0x2 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GRB			(0x3 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BRG			(0x4 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BGR			(0x5 << 12)
+#define	LCDIF_CTRL2_READ_PACK_DIR				(1 << 10)
+#define	LCDIF_CTRL2_READ_MODE_OUTPUT_IN_RGB_FORMAT		(1 << 9)
+#define	LCDIF_CTRL2_READ_MODE_6_BIT_INPUT			(1 << 8)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_MASK		(0x7 << 4)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_OFFSET	4
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_MASK			(0x7 << 1)
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_OFFSET			1
+
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_MASK			(0xffff << 16)
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET			16
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_MASK			(0xffff << 0)
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET			0
+
+#define	LCDIF_CUR_BUF_ADDR_MASK					0xffffffff
+#define	LCDIF_CUR_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_NEXT_BUF_ADDR_MASK				0xffffffff
+#define	LCDIF_NEXT_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_TIMING_CMD_HOLD_MASK				(0xff << 24)
+#define	LCDIF_TIMING_CMD_HOLD_OFFSET				24
+#define	LCDIF_TIMING_CMD_SETUP_MASK				(0xff << 16)
+#define	LCDIF_TIMING_CMD_SETUP_OFFSET				16
+#define	LCDIF_TIMING_DATA_HOLD_MASK				(0xff << 8)
+#define	LCDIF_TIMING_DATA_HOLD_OFFSET				8
+#define	LCDIF_TIMING_DATA_SETUP_MASK				(0xff << 0)
+#define	LCDIF_TIMING_DATA_SETUP_OFFSET				0
+
+#define	LCDIF_VDCTRL0_VSYNC_OEB					(1 << 29)
+#define	LCDIF_VDCTRL0_ENABLE_PRESENT				(1 << 28)
+#define	LCDIF_VDCTRL0_VSYNC_POL					(1 << 27)
+#define	LCDIF_VDCTRL0_HSYNC_POL					(1 << 26)
+#define	LCDIF_VDCTRL0_DOTCLK_POL				(1 << 25)
+#define	LCDIF_VDCTRL0_ENABLE_POL				(1 << 24)
+#define	LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT				(1 << 21)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT			(1 << 20)
+#define	LCDIF_VDCTRL0_HALF_LINE					(1 << 19)
+#define	LCDIF_VDCTRL0_HALF_LINE_MODE				(1 << 18)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK			0x3ffff
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET			0
+
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_MASK				0xffffffff
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET			0
+
+#if defined(CONFIG_MX23)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0xff << 24)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			24
+#elif defined(CONFIG_MX28)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0x3fff << 18)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			18
+#endif
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_MASK				0x3ffff
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL3_MUX_SYNC_SIGNALS				(1 << 29)
+#define	LCDIF_VDCTRL3_VSYNC_ONLY				(1 << 28)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK			(0xfff << 16)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET		16
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK			(0xffff << 0)
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET			0
+
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_MASK			(0x7 << 29)
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET			29
+#define	LCDIF_VDCTRL4_SYNC_SIGNALS_ON				(1 << 18)
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK		0x3ffff
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET		0
+
+#endif /* __MX28_REGS_LCDIF_H__ */

bjos/imx233/arch/regs-lradc.h

@@ -0,0 +1,387 @@
+/*
+ * Freescale i.MX28 LRADC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_LRADC_H__
+#define __MX28_REGS_LRADC_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_lradc_regs {
+	mxs_reg_32(hw_lradc_ctrl0);
+	mxs_reg_32(hw_lradc_ctrl1);
+	mxs_reg_32(hw_lradc_ctrl2);
+	mxs_reg_32(hw_lradc_ctrl3);
+	mxs_reg_32(hw_lradc_status);
+	mxs_reg_32(hw_lradc_ch0);
+	mxs_reg_32(hw_lradc_ch1);
+	mxs_reg_32(hw_lradc_ch2);
+	mxs_reg_32(hw_lradc_ch3);
+	mxs_reg_32(hw_lradc_ch4);
+	mxs_reg_32(hw_lradc_ch5);
+	mxs_reg_32(hw_lradc_ch6);
+	mxs_reg_32(hw_lradc_ch7);
+	mxs_reg_32(hw_lradc_delay0);
+	mxs_reg_32(hw_lradc_delay1);
+	mxs_reg_32(hw_lradc_delay2);
+	mxs_reg_32(hw_lradc_delay3);
+	mxs_reg_32(hw_lradc_debug0);
+	mxs_reg_32(hw_lradc_debug1);
+	mxs_reg_32(hw_lradc_conversion);
+	mxs_reg_32(hw_lradc_ctrl4);
+	mxs_reg_32(hw_lradc_treshold0);
+	mxs_reg_32(hw_lradc_treshold1);
+	mxs_reg_32(hw_lradc_version);
+};
+#endif
+
+#define	LRADC_CTRL0_SFTRST					(1 << 31)
+#define	LRADC_CTRL0_CLKGATE					(1 << 30)
+#define	LRADC_CTRL0_ONCHIP_GROUNDREF				(1 << 26)
+#define	LRADC_CTRL0_BUTTON1_DETECT_ENABLE			(1 << 25)
+#define	LRADC_CTRL0_BUTTON0_DETECT_ENABLE			(1 << 24)
+#define	LRADC_CTRL0_TOUCH_DETECT_ENABLE				(1 << 23)
+#define	LRADC_CTRL0_TOUCH_SCREEN_TYPE				(1 << 22)
+#define	LRADC_CTRL0_YNLRSW					(1 << 21)
+#define	LRADC_CTRL0_YPLLSW_MASK					(0x3 << 19)
+#define	LRADC_CTRL0_YPLLSW_OFFSET				19
+#define	LRADC_CTRL0_XNURSW_MASK					(0x3 << 17)
+#define	LRADC_CTRL0_XNURSW_OFFSET				17
+#define	LRADC_CTRL0_XPULSW					(1 << 16)
+#define	LRADC_CTRL0_SCHEDULE_MASK				0xff
+#define	LRADC_CTRL0_SCHEDULE_OFFSET				0
+
+#define	LRADC_CTRL1_BUTTON1_DETECT_IRQ_EN			(1 << 28)
+#define	LRADC_CTRL1_BUTTON0_DETECT_IRQ_EN			(1 << 27)
+#define	LRADC_CTRL1_THRESHOLD1_DETECT_IRQ_EN			(1 << 26)
+#define	LRADC_CTRL1_THRESHOLD0_DETECT_IRQ_EN			(1 << 25)
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN				(1 << 24)
+#define	LRADC_CTRL1_LRADC7_IRQ_EN				(1 << 23)
+#define	LRADC_CTRL1_LRADC6_IRQ_EN				(1 << 22)
+#define	LRADC_CTRL1_LRADC5_IRQ_EN				(1 << 21)
+#define	LRADC_CTRL1_LRADC4_IRQ_EN				(1 << 20)
+#define	LRADC_CTRL1_LRADC3_IRQ_EN				(1 << 19)
+#define	LRADC_CTRL1_LRADC2_IRQ_EN				(1 << 18)
+#define	LRADC_CTRL1_LRADC1_IRQ_EN				(1 << 17)
+#define	LRADC_CTRL1_LRADC0_IRQ_EN				(1 << 16)
+#define	LRADC_CTRL1_BUTTON1_DETECT_IRQ				(1 << 12)
+#define	LRADC_CTRL1_BUTTON0_DETECT_IRQ				(1 << 11)
+#define	LRADC_CTRL1_THRESHOLD1_DETECT_IRQ			(1 << 10)
+#define	LRADC_CTRL1_THRESHOLD0_DETECT_IRQ			(1 << 9)
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ				(1 << 8)
+#define	LRADC_CTRL1_LRADC7_IRQ					(1 << 7)
+#define	LRADC_CTRL1_LRADC6_IRQ					(1 << 6)
+#define	LRADC_CTRL1_LRADC5_IRQ					(1 << 5)
+#define	LRADC_CTRL1_LRADC4_IRQ					(1 << 4)
+#define	LRADC_CTRL1_LRADC3_IRQ					(1 << 3)
+#define	LRADC_CTRL1_LRADC2_IRQ					(1 << 2)
+#define	LRADC_CTRL1_LRADC1_IRQ					(1 << 1)
+#define	LRADC_CTRL1_LRADC0_IRQ					(1 << 0)
+
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_MASK				(0xff << 24)
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET			24
+#define	LRADC_CTRL2_TEMPSENSE_PWD				(1 << 15)
+#define	LRADC_CTRL2_VTHSENSE_MASK				(0x3 << 13)
+#define	LRADC_CTRL2_VTHSENSE_OFFSET				13
+#define	LRADC_CTRL2_DISABLE_MUXAMP_BYPASS			(1 << 12)
+#define	LRADC_CTRL2_TEMP_SENSOR_IENABLE1			(1 << 9)
+#define	LRADC_CTRL2_TEMP_SENSOR_IENABLE0			(1 << 8)
+#define	LRADC_CTRL2_TEMP_ISRC1_MASK				(0xf << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_OFFSET				4
+#define	LRADC_CTRL2_TEMP_ISRC1_300				(0xf << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_280				(0xe << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_260				(0xd << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_240				(0xc << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_220				(0xb << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_200				(0xa << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_180				(0x9 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_160				(0x8 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_140				(0x7 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_120				(0x6 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_100				(0x5 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_80				(0x4 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_60				(0x3 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_40				(0x2 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_20				(0x1 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC1_ZERO				(0x0 << 4)
+#define	LRADC_CTRL2_TEMP_ISRC0_MASK				(0xf << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_OFFSET				0
+#define	LRADC_CTRL2_TEMP_ISRC0_300				(0xf << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_280				(0xe << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_260				(0xd << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_240				(0xc << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_220				(0xb << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_200				(0xa << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_180				(0x9 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_160				(0x8 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_140				(0x7 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_120				(0x6 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_100				(0x5 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_80				(0x4 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_60				(0x3 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_40				(0x2 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_20				(0x1 << 0)
+#define	LRADC_CTRL2_TEMP_ISRC0_ZERO				(0x0 << 0)
+
+#define	LRADC_CTRL3_DISCARD_MASK				(0x3 << 24)
+#define	LRADC_CTRL3_DISCARD_OFFSET				24
+#define	LRADC_CTRL3_DISCARD_1_SAMPLE				(0x1 << 24)
+#define	LRADC_CTRL3_DISCARD_2_SAMPLES				(0x2 << 24)
+#define	LRADC_CTRL3_DISCARD_3_SAMPLES				(0x3 << 24)
+#define	LRADC_CTRL3_FORCE_ANALOG_PWUP				(1 << 23)
+#define	LRADC_CTRL3_FORCE_ANALOG_PWDN				(1 << 22)
+#define	LRADC_CTRL3_CYCLE_TIME_MASK				(0x3 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_OFFSET				8
+#define	LRADC_CTRL3_CYCLE_TIME_6MHZ				(0x0 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_4MHZ				(0x1 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_3MHZ				(0x2 << 8)
+#define	LRADC_CTRL3_CYCLE_TIME_2MHZ				(0x3 << 8)
+#define	LRADC_CTRL3_HIGH_TIME_MASK				(0x3 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_OFFSET				4
+#define	LRADC_CTRL3_HIGH_TIME_42NS				(0x0 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_83NS				(0x1 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_125NS				(0x2 << 4)
+#define	LRADC_CTRL3_HIGH_TIME_250NS				(0x3 << 4)
+#define	LRADC_CTRL3_DELAY_CLOCK					(1 << 1)
+#define	LRADC_CTRL3_INVERT_CLOCK				(1 << 0)
+
+#define	LRADC_STATUS_BUTTON1_PRESENT				(1 << 28)
+#define	LRADC_STATUS_BUTTON0_PRESENT				(1 << 27)
+#define	LRADC_STATUS_TEMP1_PRESENT				(1 << 26)
+#define	LRADC_STATUS_TEMP0_PRESENT				(1 << 25)
+#define	LRADC_STATUS_TOUCH_PANEL_PRESENT			(1 << 24)
+#define	LRADC_STATUS_CHANNEL7_PRESENT				(1 << 23)
+#define	LRADC_STATUS_CHANNEL6_PRESENT				(1 << 22)
+#define	LRADC_STATUS_CHANNEL5_PRESENT				(1 << 21)
+#define	LRADC_STATUS_CHANNEL4_PRESENT				(1 << 20)
+#define	LRADC_STATUS_CHANNEL3_PRESENT				(1 << 19)
+#define	LRADC_STATUS_CHANNEL2_PRESENT				(1 << 18)
+#define	LRADC_STATUS_CHANNEL1_PRESENT				(1 << 17)
+#define	LRADC_STATUS_CHANNEL0_PRESENT				(1 << 16)
+#define	LRADC_STATUS_BUTTON1_DETECT_RAW				(1 << 2)
+#define	LRADC_STATUS_BUTTON0_DETECT_RAW				(1 << 1)
+#define	LRADC_STATUS_TOUCH_DETECT_RAW				(1 << 0)
+
+#define	LRADC_CH_TOGGLE						(1 << 31)
+#define	LRADC_CH7_TESTMODE_TOGGLE				(1 << 30)
+#define	LRADC_CH_ACCUMULATE					(1 << 29)
+#define	LRADC_CH_NUM_SAMPLES_MASK				(0x1f << 24)
+#define	LRADC_CH_NUM_SAMPLES_OFFSET				24
+#define	LRADC_CH_VALUE_MASK					0x3ffff
+#define	LRADC_CH_VALUE_OFFSET					0
+
+#define	LRADC_DELAY_TRIGGER_LRADCS_MASK				(0xff << 24)
+#define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET			24
+#define	LRADC_DELAY_KICK					(1 << 20)
+#define	LRADC_DELAY_TRIGGER_DELAYS_MASK				(0xf << 16)
+#define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET			16
+#define	LRADC_DELAY_LOOP_COUNT_MASK				(0x1f << 11)
+#define	LRADC_DELAY_LOOP_COUNT_OFFSET				11
+#define	LRADC_DELAY_DELAY_MASK					0x7ff
+#define	LRADC_DELAY_DELAY_OFFSET				0
+
+#define	LRADC_DEBUG0_READONLY_MASK				(0xffff << 16)
+#define	LRADC_DEBUG0_READONLY_OFFSET				16
+#define	LRADC_DEBUG0_STATE_MASK					(0xfff << 0)
+#define	LRADC_DEBUG0_STATE_OFFSET				0
+
+#define	LRADC_DEBUG1_REQUEST_MASK				(0xff << 16)
+#define	LRADC_DEBUG1_REQUEST_OFFSET				16
+#define	LRADC_DEBUG1_TESTMODE_COUNT_MASK			(0x1f << 8)
+#define	LRADC_DEBUG1_TESTMODE_COUNT_OFFSET			8
+#define	LRADC_DEBUG1_TESTMODE6					(1 << 2)
+#define	LRADC_DEBUG1_TESTMODE5					(1 << 1)
+#define	LRADC_DEBUG1_TESTMODE					(1 << 0)
+
+#define	LRADC_CONVERSION_AUTOMATIC				(1 << 20)
+#define	LRADC_CONVERSION_SCALE_FACTOR_MASK			(0x3 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_OFFSET			16
+#define	LRADC_CONVERSION_SCALE_FACTOR_NIMH			(0x0 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_DUAL_NIMH			(0x1 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_LI_ION			(0x2 << 16)
+#define	LRADC_CONVERSION_SCALE_FACTOR_ALT_LI_ION		(0x3 << 16)
+#define	LRADC_CONVERSION_SCALED_BATT_VOLTAGE_MASK		0x3ff
+#define	LRADC_CONVERSION_SCALED_BATT_VOLTAGE_OFFSET		0
+
+#define	LRADC_CTRL4_LRADC7SELECT_MASK				(0xf << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_OFFSET				28
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL0			(0x0 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL1			(0x1 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL2			(0x2 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL3			(0x3 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL4			(0x4 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL5			(0x5 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL6			(0x6 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL7			(0x7 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL8			(0x8 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL9			(0x9 << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL10			(0xa << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL11			(0xb << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL12			(0xc << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL13			(0xd << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL14			(0xe << 28)
+#define	LRADC_CTRL4_LRADC7SELECT_CHANNEL15			(0xf << 28)
+#define	LRADC_CTRL4_LRADC6SELECT_MASK				(0xf << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_OFFSET				24
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL0			(0x0 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL1			(0x1 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL2			(0x2 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL3			(0x3 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL4			(0x4 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL5			(0x5 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL6			(0x6 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL7			(0x7 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL8			(0x8 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL9			(0x9 << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL10			(0xa << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL11			(0xb << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL12			(0xc << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL13			(0xd << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL14			(0xe << 24)
+#define	LRADC_CTRL4_LRADC6SELECT_CHANNEL15			(0xf << 24)
+#define	LRADC_CTRL4_LRADC5SELECT_MASK				(0xf << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_OFFSET				20
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL0			(0x0 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL1			(0x1 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL2			(0x2 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL3			(0x3 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL4			(0x4 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL5			(0x5 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL6			(0x6 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL7			(0x7 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL8			(0x8 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL9			(0x9 << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL10			(0xa << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL11			(0xb << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL12			(0xc << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL13			(0xd << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL14			(0xe << 20)
+#define	LRADC_CTRL4_LRADC5SELECT_CHANNEL15			(0xf << 20)
+#define	LRADC_CTRL4_LRADC4SELECT_MASK				(0xf << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_OFFSET				16
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL0			(0x0 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL1			(0x1 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL2			(0x2 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL3			(0x3 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL4			(0x4 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL5			(0x5 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL6			(0x6 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL7			(0x7 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL8			(0x8 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL9			(0x9 << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL10			(0xa << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL11			(0xb << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL12			(0xc << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL13			(0xd << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL14			(0xe << 16)
+#define	LRADC_CTRL4_LRADC4SELECT_CHANNEL15			(0xf << 16)
+#define	LRADC_CTRL4_LRADC3SELECT_MASK				(0xf << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_OFFSET				12
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL0			(0x0 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL1			(0x1 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL2			(0x2 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL3			(0x3 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL4			(0x4 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL5			(0x5 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL6			(0x6 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL7			(0x7 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL8			(0x8 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL9			(0x9 << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL10			(0xa << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL11			(0xb << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL12			(0xc << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL13			(0xd << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL14			(0xe << 12)
+#define	LRADC_CTRL4_LRADC3SELECT_CHANNEL15			(0xf << 12)
+#define	LRADC_CTRL4_LRADC2SELECT_MASK				(0xf << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_OFFSET				8
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL0			(0x0 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL1			(0x1 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL2			(0x2 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL3			(0x3 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL4			(0x4 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL5			(0x5 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL6			(0x6 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL7			(0x7 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL8			(0x8 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL9			(0x9 << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL10			(0xa << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL11			(0xb << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL12			(0xc << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL13			(0xd << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL14			(0xe << 8)
+#define	LRADC_CTRL4_LRADC2SELECT_CHANNEL15			(0xf << 8)
+#define	LRADC_CTRL4_LRADC1SELECT_MASK				(0xf << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_OFFSET				4
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL0			(0x0 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL1			(0x1 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL2			(0x2 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL3			(0x3 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL4			(0x4 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL5			(0x5 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL6			(0x6 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL7			(0x7 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL8			(0x8 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL9			(0x9 << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL10			(0xa << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL11			(0xb << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL12			(0xc << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL13			(0xd << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL14			(0xe << 4)
+#define	LRADC_CTRL4_LRADC1SELECT_CHANNEL15			(0xf << 4)
+#define	LRADC_CTRL4_LRADC0SELECT_MASK				0xf
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL0			(0x0 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL1			(0x1 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL2			(0x2 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL3			(0x3 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL4			(0x4 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL5			(0x5 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL6			(0x6 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL7			(0x7 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL8			(0x8 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL9			(0x9 << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL10			(0xa << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL11			(0xb << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL12			(0xc << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL13			(0xd << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL14			(0xe << 0)
+#define	LRADC_CTRL4_LRADC0SELECT_CHANNEL15			(0xf << 0)
+
+#define	LRADC_THRESHOLD_ENABLE					(1 << 24)
+#define	LRADC_THRESHOLD_BATTCHRG_DISABLE			(1 << 23)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_MASK			(0x7 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_OFFSET			20
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL0			(0x0 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL1			(0x1 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL2			(0x2 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL3			(0x3 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL4			(0x4 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL5			(0x5 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL6			(0x6 << 20)
+#define	LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL7			(0x7 << 20)
+#define	LRADC_THRESHOLD_SETTING_MASK				(0x3 << 18)
+#define	LRADC_THRESHOLD_SETTING_OFFSET				18
+#define	LRADC_THRESHOLD_SETTING_NO_COMPARE			(0x0 << 18)
+#define	LRADC_THRESHOLD_SETTING_DETECT_LOW			(0x1 << 18)
+#define	LRADC_THRESHOLD_SETTING_DETECT_HIGH			(0x2 << 18)
+#define	LRADC_THRESHOLD_SETTING_RESERVED			(0x3 << 18)
+#define	LRADC_THRESHOLD_VALUE_MASK				0x3ffff
+#define	LRADC_THRESHOLD_VALUE_OFFSET				0
+
+#define	LRADC_VERSION_MAJOR_MASK				(0xff << 24)
+#define	LRADC_VERSION_MAJOR_OFFSET				24
+#define	LRADC_VERSION_MINOR_MASK				(0xff << 16)
+#define	LRADC_VERSION_MINOR_OFFSET				16
+#define	LRADC_VERSION_STEP_MASK					0xffff
+#define	LRADC_VERSION_STEP_OFFSET				0
+
+#endif	/* __MX28_REGS_LRADC_H__ */

bjos/imx233/arch/regs-ocotp.h

@@ -0,0 +1,160 @@
+/*
+ * Freescale i.MX28 OCOTP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_OCOTP_H__
+#define __MX28_REGS_OCOTP_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_ocotp_regs {
+	mxs_reg_32(hw_ocotp_ctrl)	/* 0x0 */
+	mxs_reg_32(hw_ocotp_data)	/* 0x10 */
+	mxs_reg_32(hw_ocotp_cust0)	/* 0x20 */
+	mxs_reg_32(hw_ocotp_cust1)	/* 0x30 */
+	mxs_reg_32(hw_ocotp_cust2)	/* 0x40 */
+	mxs_reg_32(hw_ocotp_cust3)	/* 0x50 */
+	mxs_reg_32(hw_ocotp_crypto0)	/* 0x60 */
+	mxs_reg_32(hw_ocotp_crypto1)	/* 0x70 */
+	mxs_reg_32(hw_ocotp_crypto2)	/* 0x80 */
+	mxs_reg_32(hw_ocotp_crypto3)	/* 0x90 */
+	mxs_reg_32(hw_ocotp_hwcap0)	/* 0xa0 */
+	mxs_reg_32(hw_ocotp_hwcap1)	/* 0xb0 */
+	mxs_reg_32(hw_ocotp_hwcap2)	/* 0xc0 */
+	mxs_reg_32(hw_ocotp_hwcap3)	/* 0xd0 */
+	mxs_reg_32(hw_ocotp_hwcap4)	/* 0xe0 */
+	mxs_reg_32(hw_ocotp_hwcap5)	/* 0xf0 */
+	mxs_reg_32(hw_ocotp_swcap)	/* 0x100 */
+	mxs_reg_32(hw_ocotp_custcap)	/* 0x110 */
+	mxs_reg_32(hw_ocotp_lock)	/* 0x120 */
+	mxs_reg_32(hw_ocotp_ops0)	/* 0x130 */
+	mxs_reg_32(hw_ocotp_ops1)	/* 0x140 */
+	mxs_reg_32(hw_ocotp_ops2)	/* 0x150 */
+	mxs_reg_32(hw_ocotp_ops3)	/* 0x160 */
+	mxs_reg_32(hw_ocotp_un0)	/* 0x170 */
+	mxs_reg_32(hw_ocotp_un1)	/* 0x180 */
+	mxs_reg_32(hw_ocotp_un2)	/* 0x190 */
+	mxs_reg_32(hw_ocotp_rom0)	/* 0x1a0 */
+	mxs_reg_32(hw_ocotp_rom1)	/* 0x1b0 */
+	mxs_reg_32(hw_ocotp_rom2)	/* 0x1c0 */
+	mxs_reg_32(hw_ocotp_rom3)	/* 0x1d0 */
+	mxs_reg_32(hw_ocotp_rom4)	/* 0x1e0 */
+	mxs_reg_32(hw_ocotp_rom5)	/* 0x1f0 */
+	mxs_reg_32(hw_ocotp_rom6)	/* 0x200 */
+	mxs_reg_32(hw_ocotp_rom7)	/* 0x210 */
+	mxs_reg_32(hw_ocotp_srk0)	/* 0x220 */
+	mxs_reg_32(hw_ocotp_srk1)	/* 0x230 */
+	mxs_reg_32(hw_ocotp_srk2)	/* 0x240 */
+	mxs_reg_32(hw_ocotp_srk3)	/* 0x250 */
+	mxs_reg_32(hw_ocotp_srk4)	/* 0x260 */
+	mxs_reg_32(hw_ocotp_srk5)	/* 0x270 */
+	mxs_reg_32(hw_ocotp_srk6)	/* 0x280 */
+	mxs_reg_32(hw_ocotp_srk7)	/* 0x290 */
+	mxs_reg_32(hw_ocotp_version)	/* 0x2a0 */
+};
+#endif
+
+#define	OCOTP_CTRL_WR_UNLOCK_MASK		(0xffff << 16)
+#define	OCOTP_CTRL_WR_UNLOCK_OFFSET		16
+#define	OCOTP_CTRL_WR_UNLOCK_KEY		(0x3e77 << 16)
+#define	OCOTP_CTRL_RELOAD_SHADOWS		(1 << 13)
+#define	OCOTP_CTRL_RD_BANK_OPEN			(1 << 12)
+#define	OCOTP_CTRL_ERROR			(1 << 9)
+#define	OCOTP_CTRL_BUSY				(1 << 8)
+#define	OCOTP_CTRL_ADDR_MASK			0x3f
+#define	OCOTP_CTRL_ADDR_OFFSET			0
+
+#define	OCOTP_DATA_DATA_MASK			0xffffffff
+#define	OCOTP_DATA_DATA_OFFSET			0
+
+#define	OCOTP_CUST_BITS_MASK			0xffffffff
+#define	OCOTP_CUST_BITS_OFFSET			0
+
+#define	OCOTP_CRYPTO_BITS_MASK			0xffffffff
+#define	OCOTP_CRYPTO_BITS_OFFSET		0
+
+#define	OCOTP_HWCAP_BITS_MASK			0xffffffff
+#define	OCOTP_HWCAP_BITS_OFFSET			0
+
+#define	OCOTP_SWCAP_BITS_MASK			0xffffffff
+#define	OCOTP_SWCAP_BITS_OFFSET			0
+
+#define	OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT	(1 << 2)
+#define	OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT	(1 << 1)
+
+#define	OCOTP_LOCK_ROM7				(1 << 31)
+#define	OCOTP_LOCK_ROM6				(1 << 30)
+#define	OCOTP_LOCK_ROM5				(1 << 29)
+#define	OCOTP_LOCK_ROM4				(1 << 28)
+#define	OCOTP_LOCK_ROM3				(1 << 27)
+#define	OCOTP_LOCK_ROM2				(1 << 26)
+#define	OCOTP_LOCK_ROM1				(1 << 25)
+#define	OCOTP_LOCK_ROM0				(1 << 24)
+#define	OCOTP_LOCK_HWSW_SHADOW_ALT		(1 << 23)
+#define	OCOTP_LOCK_CRYPTODCP_ALT		(1 << 22)
+#define	OCOTP_LOCK_CRYPTOKEY_ALT		(1 << 21)
+#define	OCOTP_LOCK_PIN				(1 << 20)
+#define	OCOTP_LOCK_OPS				(1 << 19)
+#define	OCOTP_LOCK_UN2				(1 << 18)
+#define	OCOTP_LOCK_UN1				(1 << 17)
+#define	OCOTP_LOCK_UN0				(1 << 16)
+#define	OCOTP_LOCK_SRK				(1 << 15)
+#define	OCOTP_LOCK_UNALLOCATED_MASK		(0x7 << 12)
+#define	OCOTP_LOCK_UNALLOCATED_OFFSET		12
+#define	OCOTP_LOCK_SRK_SHADOW			(1 << 11)
+#define	OCOTP_LOCK_ROM_SHADOW			(1 << 10)
+#define	OCOTP_LOCK_CUSTCAP			(1 << 9)
+#define	OCOTP_LOCK_HWSW				(1 << 8)
+#define	OCOTP_LOCK_CUSTCAP_SHADOW		(1 << 7)
+#define	OCOTP_LOCK_HWSW_SHADOW			(1 << 6)
+#define	OCOTP_LOCK_CRYPTODCP			(1 << 5)
+#define	OCOTP_LOCK_CRYPTOKEY			(1 << 4)
+#define	OCOTP_LOCK_CUST3			(1 << 3)
+#define	OCOTP_LOCK_CUST2			(1 << 2)
+#define	OCOTP_LOCK_CUST1			(1 << 1)
+#define	OCOTP_LOCK_CUST0			(1 << 0)
+
+#define	OCOTP_OPS_BITS_MASK			0xffffffff
+#define	OCOTP_OPS_BITS_OFFSET			0
+
+#define	OCOTP_UN_BITS_MASK			0xffffffff
+#define	OCOTP_UN_BITS_OFFSET			0
+
+#define	OCOTP_ROM_BOOT_MODE_MASK		(0xff << 24)
+#define	OCOTP_ROM_BOOT_MODE_OFFSET		24
+#define	OCOTP_ROM_SD_MMC_MODE_MASK		(0x3 << 22)
+#define	OCOTP_ROM_SD_MMC_MODE_OFFSET		22
+#define	OCOTP_ROM_SD_POWER_GATE_GPIO_MASK	(0x3 << 20)
+#define	OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET	20
+#define	OCOTP_ROM_SD_POWER_UP_DELAY_MASK	(0x3f << 14)
+#define	OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET	14
+#define	OCOTP_ROM_SD_BUS_WIDTH_MASK		(0x3 << 12)
+#define	OCOTP_ROM_SD_BUS_WIDTH_OFFSET		12
+#define	OCOTP_ROM_SSP_SCK_INDEX_MASK		(0xf << 8)
+#define	OCOTP_ROM_SSP_SCK_INDEX_OFFSET		8
+#define	OCOTP_ROM_EMMC_USE_DDR			(1 << 7)
+#define	OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ	(1 << 6)
+#define	OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM	(1 << 5)
+#define	OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT	(1 << 4)
+#define	OCOTP_ROM_SD_MBR_BOOT			(1 << 3)
+
+#define	OCOTP_SRK_BITS_MASK			0xffffffff
+#define	OCOTP_SRK_BITS_OFFSET			0
+
+#define	OCOTP_VERSION_MAJOR_MASK		(0xff << 24)
+#define	OCOTP_VERSION_MAJOR_OFFSET		24
+#define	OCOTP_VERSION_MINOR_MASK		(0xff << 16)
+#define	OCOTP_VERSION_MINOR_OFFSET		16
+#define	OCOTP_VERSION_STEP_MASK			0xffff
+#define	OCOTP_VERSION_STEP_OFFSET		0
+
+#endif /* __MX28_REGS_OCOTP_H__ */

bjos/imx233/arch/regs-pinctrl.h

@@ -0,0 +1,1271 @@
+/*
+ * Freescale i.MX28 PINCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_PINCTRL_H__
+#define __MX28_REGS_PINCTRL_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_pinctrl_regs {
+	mxs_reg_32(hw_pinctrl_ctrl)		/* 0x0 */
+
+	uint32_t	reserved1[60];
+
+	mxs_reg_32(hw_pinctrl_muxsel0)		/* 0x100 */
+	mxs_reg_32(hw_pinctrl_muxsel1)		/* 0x110 */
+	mxs_reg_32(hw_pinctrl_muxsel2)		/* 0x120 */
+	mxs_reg_32(hw_pinctrl_muxsel3)		/* 0x130 */
+	mxs_reg_32(hw_pinctrl_muxsel4)		/* 0x140 */
+	mxs_reg_32(hw_pinctrl_muxsel5)		/* 0x150 */
+	mxs_reg_32(hw_pinctrl_muxsel6)		/* 0x160 */
+	mxs_reg_32(hw_pinctrl_muxsel7)		/* 0x170 */
+	mxs_reg_32(hw_pinctrl_muxsel8)		/* 0x180 */
+	mxs_reg_32(hw_pinctrl_muxsel9)		/* 0x190 */
+	mxs_reg_32(hw_pinctrl_muxsel10)	/* 0x1a0 */
+	mxs_reg_32(hw_pinctrl_muxsel11)	/* 0x1b0 */
+	mxs_reg_32(hw_pinctrl_muxsel12)	/* 0x1c0 */
+	mxs_reg_32(hw_pinctrl_muxsel13)	/* 0x1d0 */
+
+	uint32_t	reserved2[72];
+
+	mxs_reg_32(hw_pinctrl_drive0)		/* 0x300 */
+	mxs_reg_32(hw_pinctrl_drive1)		/* 0x310 */
+	mxs_reg_32(hw_pinctrl_drive2)		/* 0x320 */
+	mxs_reg_32(hw_pinctrl_drive3)		/* 0x330 */
+	mxs_reg_32(hw_pinctrl_drive4)		/* 0x340 */
+	mxs_reg_32(hw_pinctrl_drive5)		/* 0x350 */
+	mxs_reg_32(hw_pinctrl_drive6)		/* 0x360 */
+	mxs_reg_32(hw_pinctrl_drive7)		/* 0x370 */
+	mxs_reg_32(hw_pinctrl_drive8)		/* 0x380 */
+	mxs_reg_32(hw_pinctrl_drive9)		/* 0x390 */
+	mxs_reg_32(hw_pinctrl_drive10)		/* 0x3a0 */
+	mxs_reg_32(hw_pinctrl_drive11)		/* 0x3b0 */
+	mxs_reg_32(hw_pinctrl_drive12)		/* 0x3c0 */
+	mxs_reg_32(hw_pinctrl_drive13)		/* 0x3d0 */
+	mxs_reg_32(hw_pinctrl_drive14)		/* 0x3e0 */
+	mxs_reg_32(hw_pinctrl_drive15)		/* 0x3f0 */
+	mxs_reg_32(hw_pinctrl_drive16)		/* 0x400 */
+	mxs_reg_32(hw_pinctrl_drive17)		/* 0x410 */
+	mxs_reg_32(hw_pinctrl_drive18)		/* 0x420 */
+	mxs_reg_32(hw_pinctrl_drive19)		/* 0x430 */
+
+	uint32_t	reserved3[112];
+
+	mxs_reg_32(hw_pinctrl_pull0)		/* 0x600 */
+	mxs_reg_32(hw_pinctrl_pull1)		/* 0x610 */
+	mxs_reg_32(hw_pinctrl_pull2)		/* 0x620 */
+	mxs_reg_32(hw_pinctrl_pull3)		/* 0x630 */
+	mxs_reg_32(hw_pinctrl_pull4)		/* 0x640 */
+	mxs_reg_32(hw_pinctrl_pull5)		/* 0x650 */
+	mxs_reg_32(hw_pinctrl_pull6)		/* 0x660 */
+
+	uint32_t	reserved4[36];
+
+	mxs_reg_32(hw_pinctrl_dout0)		/* 0x700 */
+	mxs_reg_32(hw_pinctrl_dout1)		/* 0x710 */
+	mxs_reg_32(hw_pinctrl_dout2)		/* 0x720 */
+	mxs_reg_32(hw_pinctrl_dout3)		/* 0x730 */
+	mxs_reg_32(hw_pinctrl_dout4)		/* 0x740 */
+
+	uint32_t	reserved5[108];
+
+	mxs_reg_32(hw_pinctrl_din0)		/* 0x900 */
+	mxs_reg_32(hw_pinctrl_din1)		/* 0x910 */
+	mxs_reg_32(hw_pinctrl_din2)		/* 0x920 */
+	mxs_reg_32(hw_pinctrl_din3)		/* 0x930 */
+	mxs_reg_32(hw_pinctrl_din4)		/* 0x940 */
+
+	uint32_t	reserved6[108];
+
+	mxs_reg_32(hw_pinctrl_doe0)		/* 0xb00 */
+	mxs_reg_32(hw_pinctrl_doe1)		/* 0xb10 */
+	mxs_reg_32(hw_pinctrl_doe2)		/* 0xb20 */
+	mxs_reg_32(hw_pinctrl_doe3)		/* 0xb30 */
+	mxs_reg_32(hw_pinctrl_doe4)		/* 0xb40 */
+
+	uint32_t	reserved7[300];
+
+	mxs_reg_32(hw_pinctrl_pin2irq0)	/* 0x1000 */
+	mxs_reg_32(hw_pinctrl_pin2irq1)	/* 0x1010 */
+	mxs_reg_32(hw_pinctrl_pin2irq2)	/* 0x1020 */
+	mxs_reg_32(hw_pinctrl_pin2irq3)	/* 0x1030 */
+	mxs_reg_32(hw_pinctrl_pin2irq4)	/* 0x1040 */
+
+	uint32_t	reserved8[44];
+
+	mxs_reg_32(hw_pinctrl_irqen0)		/* 0x1100 */
+	mxs_reg_32(hw_pinctrl_irqen1)		/* 0x1110 */
+	mxs_reg_32(hw_pinctrl_irqen2)		/* 0x1120 */
+	mxs_reg_32(hw_pinctrl_irqen3)		/* 0x1130 */
+	mxs_reg_32(hw_pinctrl_irqen4)		/* 0x1140 */
+
+	uint32_t	reserved9[44];
+
+	mxs_reg_32(hw_pinctrl_irqlevel0)	/* 0x1200 */
+	mxs_reg_32(hw_pinctrl_irqlevel1)	/* 0x1210 */
+	mxs_reg_32(hw_pinctrl_irqlevel2)	/* 0x1220 */
+	mxs_reg_32(hw_pinctrl_irqlevel3)	/* 0x1230 */
+	mxs_reg_32(hw_pinctrl_irqlevel4)	/* 0x1240 */
+
+	uint32_t	reserved10[44];
+
+	mxs_reg_32(hw_pinctrl_irqpol0)		/* 0x1300 */
+	mxs_reg_32(hw_pinctrl_irqpol1)		/* 0x1310 */
+	mxs_reg_32(hw_pinctrl_irqpol2)		/* 0x1320 */
+	mxs_reg_32(hw_pinctrl_irqpol3)		/* 0x1330 */
+	mxs_reg_32(hw_pinctrl_irqpol4)		/* 0x1340 */
+
+	uint32_t	reserved11[44];
+
+	mxs_reg_32(hw_pinctrl_irqstat0)	/* 0x1400 */
+	mxs_reg_32(hw_pinctrl_irqstat1)	/* 0x1410 */
+	mxs_reg_32(hw_pinctrl_irqstat2)	/* 0x1420 */
+	mxs_reg_32(hw_pinctrl_irqstat3)	/* 0x1430 */
+	mxs_reg_32(hw_pinctrl_irqstat4)	/* 0x1440 */
+
+	uint32_t	reserved12[380];
+
+	mxs_reg_32(hw_pinctrl_emi_odt_ctrl)	/* 0x1a40 */
+
+	uint32_t	reserved13[76];
+
+	mxs_reg_32(hw_pinctrl_emi_ds_ctrl)	/* 0x1b80 */
+};
+#endif
+
+#define	PINCTRL_CTRL_SFTRST				(1 << 31)
+#define	PINCTRL_CTRL_CLKGATE				(1 << 30)
+#define	PINCTRL_CTRL_PRESENT4				(1 << 24)
+#define	PINCTRL_CTRL_PRESENT3				(1 << 23)
+#define	PINCTRL_CTRL_PRESENT2				(1 << 22)
+#define	PINCTRL_CTRL_PRESENT1				(1 << 21)
+#define	PINCTRL_CTRL_PRESENT0				(1 << 20)
+#define	PINCTRL_CTRL_IRQOUT4				(1 << 4)
+#define	PINCTRL_CTRL_IRQOUT3				(1 << 3)
+#define	PINCTRL_CTRL_IRQOUT2				(1 << 2)
+#define	PINCTRL_CTRL_IRQOUT1				(1 << 1)
+#define	PINCTRL_CTRL_IRQOUT0				(1 << 0)
+
+#define	PINCTRL_MUXSEL0_BANK0_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL0_BANK0_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL0_BANK0_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL0_BANK0_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL0_BANK0_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL0_BANK0_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL0_BANK0_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL0_BANK0_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL1_BANK0_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL1_BANK0_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL1_BANK0_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL1_BANK0_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL1_BANK0_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL1_BANK0_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL1_BANK0_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL1_BANK0_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL1_BANK0_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL1_BANK0_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL1_BANK0_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL1_BANK0_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL1_BANK0_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL2_BANK1_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL2_BANK1_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL2_BANK1_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL2_BANK1_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL2_BANK1_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL2_BANK1_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL2_BANK1_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL2_BANK1_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL2_BANK1_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL2_BANK1_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL2_BANK1_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL2_BANK1_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL2_BANK1_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL2_BANK1_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL2_BANK1_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL2_BANK1_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL3_BANK1_PIN31_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET		30
+#define	PINCTRL_MUXSEL3_BANK1_PIN30_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET		28
+#define	PINCTRL_MUXSEL3_BANK1_PIN29_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET		26
+#define	PINCTRL_MUXSEL3_BANK1_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL3_BANK1_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL3_BANK1_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL3_BANK1_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL3_BANK1_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL3_BANK1_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL3_BANK1_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL3_BANK1_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL3_BANK1_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL3_BANK1_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL3_BANK1_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL3_BANK1_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL3_BANK1_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL4_BANK2_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL4_BANK2_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL4_BANK2_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL4_BANK2_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL4_BANK2_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL4_BANK2_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL4_BANK2_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL4_BANK2_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL4_BANK2_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL4_BANK2_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL4_BANK2_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL4_BANK2_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL4_BANK2_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL4_BANK2_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL4_BANK2_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL5_BANK2_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL5_BANK2_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL5_BANK2_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL5_BANK2_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL5_BANK2_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL5_BANK2_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL5_BANK2_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL5_BANK2_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL5_BANK2_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL5_BANK2_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL6_BANK3_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL6_BANK3_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL6_BANK3_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL6_BANK3_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL6_BANK3_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL6_BANK3_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL6_BANK3_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL6_BANK3_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL6_BANK3_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL6_BANK3_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL6_BANK3_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL6_BANK3_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL6_BANK3_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL6_BANK3_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL6_BANK3_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL6_BANK3_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL7_BANK3_PIN30_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET		28
+#define	PINCTRL_MUXSEL7_BANK3_PIN29_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET		26
+#define	PINCTRL_MUXSEL7_BANK3_PIN28_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET		24
+#define	PINCTRL_MUXSEL7_BANK3_PIN27_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET		22
+#define	PINCTRL_MUXSEL7_BANK3_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL7_BANK3_PIN25_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET		18
+#define	PINCTRL_MUXSEL7_BANK3_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL7_BANK3_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL7_BANK3_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL7_BANK3_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL7_BANK3_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL7_BANK3_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL7_BANK3_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL7_BANK3_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL8_BANK4_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL8_BANK4_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL8_BANK4_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL8_BANK4_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL8_BANK4_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL8_BANK4_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL8_BANK4_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL8_BANK4_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL8_BANK4_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL8_BANK4_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL8_BANK4_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL8_BANK4_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL8_BANK4_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL8_BANK4_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL8_BANK4_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL8_BANK4_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL9_BANK4_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL9_BANK4_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL10_BANK5_PIN15_MASK		(0x3 << 30)
+#define	PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET		30
+#define	PINCTRL_MUXSEL10_BANK5_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL10_BANK5_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL10_BANK5_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL10_BANK5_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL10_BANK5_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL10_BANK5_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL10_BANK5_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL10_BANK5_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL10_BANK5_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL10_BANK5_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL10_BANK5_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL10_BANK5_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL10_BANK5_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL10_BANK5_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL10_BANK5_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL11_BANK5_PIN26_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET		20
+#define	PINCTRL_MUXSEL11_BANK5_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL11_BANK5_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL11_BANK5_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL11_BANK5_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL11_BANK5_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL11_BANK5_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL11_BANK5_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL11_BANK5_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET		0
+
+#define	PINCTRL_MUXSEL12_BANK6_PIN14_MASK		(0x3 << 28)
+#define	PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET		28
+#define	PINCTRL_MUXSEL12_BANK6_PIN13_MASK		(0x3 << 26)
+#define	PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET		26
+#define	PINCTRL_MUXSEL12_BANK6_PIN12_MASK		(0x3 << 24)
+#define	PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET		24
+#define	PINCTRL_MUXSEL12_BANK6_PIN11_MASK		(0x3 << 22)
+#define	PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET		22
+#define	PINCTRL_MUXSEL12_BANK6_PIN10_MASK		(0x3 << 20)
+#define	PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET		20
+#define	PINCTRL_MUXSEL12_BANK6_PIN09_MASK		(0x3 << 18)
+#define	PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET		18
+#define	PINCTRL_MUXSEL12_BANK6_PIN08_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET		16
+#define	PINCTRL_MUXSEL12_BANK6_PIN07_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET		14
+#define	PINCTRL_MUXSEL12_BANK6_PIN06_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET		12
+#define	PINCTRL_MUXSEL12_BANK6_PIN05_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET		10
+#define	PINCTRL_MUXSEL12_BANK6_PIN04_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET		8
+#define	PINCTRL_MUXSEL12_BANK6_PIN03_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET		6
+#define	PINCTRL_MUXSEL12_BANK6_PIN02_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET		4
+#define	PINCTRL_MUXSEL12_BANK6_PIN01_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET		2
+#define	PINCTRL_MUXSEL12_BANK6_PIN00_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET		0
+
+#define	PINCTRL_MUXSEL13_BANK6_PIN24_MASK		(0x3 << 16)
+#define	PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET		16
+#define	PINCTRL_MUXSEL13_BANK6_PIN23_MASK		(0x3 << 14)
+#define	PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET		14
+#define	PINCTRL_MUXSEL13_BANK6_PIN22_MASK		(0x3 << 12)
+#define	PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET		12
+#define	PINCTRL_MUXSEL13_BANK6_PIN21_MASK		(0x3 << 10)
+#define	PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET		10
+#define	PINCTRL_MUXSEL13_BANK6_PIN20_MASK		(0x3 << 8)
+#define	PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET		8
+#define	PINCTRL_MUXSEL13_BANK6_PIN19_MASK		(0x3 << 6)
+#define	PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET		6
+#define	PINCTRL_MUXSEL13_BANK6_PIN18_MASK		(0x3 << 4)
+#define	PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET		4
+#define	PINCTRL_MUXSEL13_BANK6_PIN17_MASK		(0x3 << 2)
+#define	PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET		2
+#define	PINCTRL_MUXSEL13_BANK6_PIN16_MASK		(0x3 << 0)
+#define	PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET		0
+
+#define	PINCTRL_DRIVE0_BANK0_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE0_BANK0_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE0_BANK0_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE0_BANK0_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE0_BANK0_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE0_BANK0_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE0_BANK0_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE0_BANK0_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE2_BANK0_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE2_BANK0_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE2_BANK0_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE2_BANK0_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE2_BANK0_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE2_BANK0_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE2_BANK0_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE2_BANK0_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE3_BANK0_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE3_BANK0_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE3_BANK0_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE3_BANK0_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE3_BANK0_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE4_BANK1_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE4_BANK1_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE4_BANK1_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE4_BANK1_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE4_BANK1_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE4_BANK1_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE4_BANK1_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE4_BANK1_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE5_BANK1_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE5_BANK1_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE5_BANK1_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE5_BANK1_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE5_BANK1_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE5_BANK1_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE5_BANK1_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE5_BANK1_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE6_BANK1_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE6_BANK1_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE6_BANK1_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE6_BANK1_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE6_BANK1_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE6_BANK1_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE6_BANK1_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE6_BANK1_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE7_BANK1_PIN31_V			(1 << 30)
+#define	PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET		28
+#define	PINCTRL_DRIVE7_BANK1_PIN30_V			(1 << 26)
+#define	PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET		24
+#define	PINCTRL_DRIVE7_BANK1_PIN29_V			(1 << 22)
+#define	PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET		20
+#define	PINCTRL_DRIVE7_BANK1_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE7_BANK1_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE7_BANK1_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE7_BANK1_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE7_BANK1_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE8_BANK2_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE8_BANK2_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE8_BANK2_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE8_BANK2_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE8_BANK2_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE8_BANK2_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE8_BANK2_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE8_BANK2_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE9_BANK2_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE9_BANK2_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE9_BANK2_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE9_BANK2_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE9_BANK2_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE9_BANK2_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE9_BANK2_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE10_BANK2_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE10_BANK2_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE10_BANK2_PIN19_V			(1 << 14)
+#define	PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET		12
+#define	PINCTRL_DRIVE10_BANK2_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE10_BANK2_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE10_BANK2_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE11_BANK2_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE11_BANK2_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE11_BANK2_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE11_BANK2_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE12_BANK3_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE12_BANK3_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE12_BANK3_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE12_BANK3_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE12_BANK3_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE12_BANK3_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE12_BANK3_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE12_BANK3_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE13_BANK3_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE13_BANK3_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE13_BANK3_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE13_BANK3_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE13_BANK3_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE13_BANK3_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE13_BANK3_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE13_BANK3_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE14_BANK3_PIN23_V			(1 << 30)
+#define	PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET		28
+#define	PINCTRL_DRIVE14_BANK3_PIN22_V			(1 << 26)
+#define	PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET		24
+#define	PINCTRL_DRIVE14_BANK3_PIN21_V			(1 << 22)
+#define	PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET		20
+#define	PINCTRL_DRIVE14_BANK3_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE14_BANK3_PIN18_V			(1 << 10)
+#define	PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET		8
+#define	PINCTRL_DRIVE14_BANK3_PIN17_V			(1 << 6)
+#define	PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET		4
+#define	PINCTRL_DRIVE14_BANK3_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE15_BANK3_PIN30_V			(1 << 26)
+#define	PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET		24
+#define	PINCTRL_DRIVE15_BANK3_PIN29_V			(1 << 22)
+#define	PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET		20
+#define	PINCTRL_DRIVE15_BANK3_PIN28_V			(1 << 18)
+#define	PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET		16
+#define	PINCTRL_DRIVE15_BANK3_PIN27_V			(1 << 14)
+#define	PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET		12
+#define	PINCTRL_DRIVE15_BANK3_PIN26_V			(1 << 10)
+#define	PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET		8
+#define	PINCTRL_DRIVE15_BANK3_PIN25_V			(1 << 6)
+#define	PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET		4
+#define	PINCTRL_DRIVE15_BANK3_PIN24_V			(1 << 2)
+#define	PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE16_BANK4_PIN07_V			(1 << 30)
+#define	PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET		28
+#define	PINCTRL_DRIVE16_BANK4_PIN06_V			(1 << 26)
+#define	PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET		24
+#define	PINCTRL_DRIVE16_BANK4_PIN05_V			(1 << 22)
+#define	PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET		20
+#define	PINCTRL_DRIVE16_BANK4_PIN04_V			(1 << 18)
+#define	PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET		16
+#define	PINCTRL_DRIVE16_BANK4_PIN03_V			(1 << 14)
+#define	PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET		12
+#define	PINCTRL_DRIVE16_BANK4_PIN02_V			(1 << 10)
+#define	PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET		8
+#define	PINCTRL_DRIVE16_BANK4_PIN01_V			(1 << 6)
+#define	PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET		4
+#define	PINCTRL_DRIVE16_BANK4_PIN00_V			(1 << 2)
+#define	PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE17_BANK4_PIN15_V			(1 << 30)
+#define	PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK		(0x3 << 28)
+#define	PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET		28
+#define	PINCTRL_DRIVE17_BANK4_PIN14_V			(1 << 26)
+#define	PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK		(0x3 << 24)
+#define	PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET		24
+#define	PINCTRL_DRIVE17_BANK4_PIN13_V			(1 << 22)
+#define	PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK		(0x3 << 20)
+#define	PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET		20
+#define	PINCTRL_DRIVE17_BANK4_PIN12_V			(1 << 18)
+#define	PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET		16
+#define	PINCTRL_DRIVE17_BANK4_PIN11_V			(1 << 14)
+#define	PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK		(0x3 << 12)
+#define	PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET		12
+#define	PINCTRL_DRIVE17_BANK4_PIN10_V			(1 << 10)
+#define	PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK		(0x3 << 8)
+#define	PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET		8
+#define	PINCTRL_DRIVE17_BANK4_PIN09_V			(1 << 6)
+#define	PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK		(0x3 << 4)
+#define	PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET		4
+#define	PINCTRL_DRIVE17_BANK4_PIN08_V			(1 << 2)
+#define	PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET		0
+
+#define	PINCTRL_DRIVE18_BANK4_PIN20_V			(1 << 18)
+#define	PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK		(0x3 << 16)
+#define	PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET		16
+#define	PINCTRL_DRIVE18_BANK4_PIN16_V			(1 << 2)
+#define	PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK		(0x3 << 0)
+#define	PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET		0
+
+#define	PINCTRL_PULL0_BANK0_PIN28			(1 << 28)
+#define	PINCTRL_PULL0_BANK0_PIN27			(1 << 27)
+#define	PINCTRL_PULL0_BANK0_PIN26			(1 << 26)
+#define	PINCTRL_PULL0_BANK0_PIN25			(1 << 25)
+#define	PINCTRL_PULL0_BANK0_PIN24			(1 << 24)
+#define	PINCTRL_PULL0_BANK0_PIN23			(1 << 23)
+#define	PINCTRL_PULL0_BANK0_PIN22			(1 << 22)
+#define	PINCTRL_PULL0_BANK0_PIN21			(1 << 21)
+#define	PINCTRL_PULL0_BANK0_PIN20			(1 << 20)
+#define	PINCTRL_PULL0_BANK0_PIN19			(1 << 19)
+#define	PINCTRL_PULL0_BANK0_PIN18			(1 << 18)
+#define	PINCTRL_PULL0_BANK0_PIN17			(1 << 17)
+#define	PINCTRL_PULL0_BANK0_PIN16			(1 << 16)
+#define	PINCTRL_PULL0_BANK0_PIN07			(1 << 7)
+#define	PINCTRL_PULL0_BANK0_PIN06			(1 << 6)
+#define	PINCTRL_PULL0_BANK0_PIN05			(1 << 5)
+#define	PINCTRL_PULL0_BANK0_PIN04			(1 << 4)
+#define	PINCTRL_PULL0_BANK0_PIN03			(1 << 3)
+#define	PINCTRL_PULL0_BANK0_PIN02			(1 << 2)
+#define	PINCTRL_PULL0_BANK0_PIN01			(1 << 1)
+#define	PINCTRL_PULL0_BANK0_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL1_BANK1_PIN31			(1 << 31)
+#define	PINCTRL_PULL1_BANK1_PIN30			(1 << 30)
+#define	PINCTRL_PULL1_BANK1_PIN29			(1 << 29)
+#define	PINCTRL_PULL1_BANK1_PIN28			(1 << 28)
+#define	PINCTRL_PULL1_BANK1_PIN27			(1 << 27)
+#define	PINCTRL_PULL1_BANK1_PIN26			(1 << 26)
+#define	PINCTRL_PULL1_BANK1_PIN25			(1 << 25)
+#define	PINCTRL_PULL1_BANK1_PIN24			(1 << 24)
+#define	PINCTRL_PULL1_BANK1_PIN23			(1 << 23)
+#define	PINCTRL_PULL1_BANK1_PIN22			(1 << 22)
+#define	PINCTRL_PULL1_BANK1_PIN21			(1 << 21)
+#define	PINCTRL_PULL1_BANK1_PIN20			(1 << 20)
+#define	PINCTRL_PULL1_BANK1_PIN19			(1 << 19)
+#define	PINCTRL_PULL1_BANK1_PIN18			(1 << 18)
+#define	PINCTRL_PULL1_BANK1_PIN17			(1 << 17)
+#define	PINCTRL_PULL1_BANK1_PIN16			(1 << 16)
+#define	PINCTRL_PULL1_BANK1_PIN15			(1 << 15)
+#define	PINCTRL_PULL1_BANK1_PIN14			(1 << 14)
+#define	PINCTRL_PULL1_BANK1_PIN13			(1 << 13)
+#define	PINCTRL_PULL1_BANK1_PIN12			(1 << 12)
+#define	PINCTRL_PULL1_BANK1_PIN11			(1 << 11)
+#define	PINCTRL_PULL1_BANK1_PIN10			(1 << 10)
+#define	PINCTRL_PULL1_BANK1_PIN09			(1 << 9)
+#define	PINCTRL_PULL1_BANK1_PIN08			(1 << 8)
+#define	PINCTRL_PULL1_BANK1_PIN07			(1 << 7)
+#define	PINCTRL_PULL1_BANK1_PIN06			(1 << 6)
+#define	PINCTRL_PULL1_BANK1_PIN05			(1 << 5)
+#define	PINCTRL_PULL1_BANK1_PIN04			(1 << 4)
+#define	PINCTRL_PULL1_BANK1_PIN03			(1 << 3)
+#define	PINCTRL_PULL1_BANK1_PIN02			(1 << 2)
+#define	PINCTRL_PULL1_BANK1_PIN01			(1 << 1)
+#define	PINCTRL_PULL1_BANK1_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL2_BANK2_PIN27			(1 << 27)
+#define	PINCTRL_PULL2_BANK2_PIN26			(1 << 26)
+#define	PINCTRL_PULL2_BANK2_PIN25			(1 << 25)
+#define	PINCTRL_PULL2_BANK2_PIN24			(1 << 24)
+#define	PINCTRL_PULL2_BANK2_PIN21			(1 << 21)
+#define	PINCTRL_PULL2_BANK2_PIN20			(1 << 20)
+#define	PINCTRL_PULL2_BANK2_PIN19			(1 << 19)
+#define	PINCTRL_PULL2_BANK2_PIN18			(1 << 18)
+#define	PINCTRL_PULL2_BANK2_PIN17			(1 << 17)
+#define	PINCTRL_PULL2_BANK2_PIN16			(1 << 16)
+#define	PINCTRL_PULL2_BANK2_PIN15			(1 << 15)
+#define	PINCTRL_PULL2_BANK2_PIN14			(1 << 14)
+#define	PINCTRL_PULL2_BANK2_PIN13			(1 << 13)
+#define	PINCTRL_PULL2_BANK2_PIN12			(1 << 12)
+#define	PINCTRL_PULL2_BANK2_PIN10			(1 << 10)
+#define	PINCTRL_PULL2_BANK2_PIN09			(1 << 9)
+#define	PINCTRL_PULL2_BANK2_PIN08			(1 << 8)
+#define	PINCTRL_PULL2_BANK2_PIN07			(1 << 7)
+#define	PINCTRL_PULL2_BANK2_PIN06			(1 << 6)
+#define	PINCTRL_PULL2_BANK2_PIN05			(1 << 5)
+#define	PINCTRL_PULL2_BANK2_PIN04			(1 << 4)
+#define	PINCTRL_PULL2_BANK2_PIN03			(1 << 3)
+#define	PINCTRL_PULL2_BANK2_PIN02			(1 << 2)
+#define	PINCTRL_PULL2_BANK2_PIN01			(1 << 1)
+#define	PINCTRL_PULL2_BANK2_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL3_BANK3_PIN30			(1 << 30)
+#define	PINCTRL_PULL3_BANK3_PIN29			(1 << 29)
+#define	PINCTRL_PULL3_BANK3_PIN28			(1 << 28)
+#define	PINCTRL_PULL3_BANK3_PIN27			(1 << 27)
+#define	PINCTRL_PULL3_BANK3_PIN26			(1 << 26)
+#define	PINCTRL_PULL3_BANK3_PIN25			(1 << 25)
+#define	PINCTRL_PULL3_BANK3_PIN24			(1 << 24)
+#define	PINCTRL_PULL3_BANK3_PIN23			(1 << 23)
+#define	PINCTRL_PULL3_BANK3_PIN22			(1 << 22)
+#define	PINCTRL_PULL3_BANK3_PIN21			(1 << 21)
+#define	PINCTRL_PULL3_BANK3_PIN20			(1 << 20)
+#define	PINCTRL_PULL3_BANK3_PIN18			(1 << 18)
+#define	PINCTRL_PULL3_BANK3_PIN17			(1 << 17)
+#define	PINCTRL_PULL3_BANK3_PIN16			(1 << 16)
+#define	PINCTRL_PULL3_BANK3_PIN15			(1 << 15)
+#define	PINCTRL_PULL3_BANK3_PIN14			(1 << 14)
+#define	PINCTRL_PULL3_BANK3_PIN13			(1 << 13)
+#define	PINCTRL_PULL3_BANK3_PIN12			(1 << 12)
+#define	PINCTRL_PULL3_BANK3_PIN11			(1 << 11)
+#define	PINCTRL_PULL3_BANK3_PIN10			(1 << 10)
+#define	PINCTRL_PULL3_BANK3_PIN09			(1 << 9)
+#define	PINCTRL_PULL3_BANK3_PIN08			(1 << 8)
+#define	PINCTRL_PULL3_BANK3_PIN07			(1 << 7)
+#define	PINCTRL_PULL3_BANK3_PIN06			(1 << 6)
+#define	PINCTRL_PULL3_BANK3_PIN05			(1 << 5)
+#define	PINCTRL_PULL3_BANK3_PIN04			(1 << 4)
+#define	PINCTRL_PULL3_BANK3_PIN03			(1 << 3)
+#define	PINCTRL_PULL3_BANK3_PIN02			(1 << 2)
+#define	PINCTRL_PULL3_BANK3_PIN01			(1 << 1)
+#define	PINCTRL_PULL3_BANK3_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL4_BANK4_PIN20			(1 << 20)
+#define	PINCTRL_PULL4_BANK4_PIN16			(1 << 16)
+#define	PINCTRL_PULL4_BANK4_PIN15			(1 << 15)
+#define	PINCTRL_PULL4_BANK4_PIN14			(1 << 14)
+#define	PINCTRL_PULL4_BANK4_PIN13			(1 << 13)
+#define	PINCTRL_PULL4_BANK4_PIN12			(1 << 12)
+#define	PINCTRL_PULL4_BANK4_PIN11			(1 << 11)
+#define	PINCTRL_PULL4_BANK4_PIN10			(1 << 10)
+#define	PINCTRL_PULL4_BANK4_PIN09			(1 << 9)
+#define	PINCTRL_PULL4_BANK4_PIN08			(1 << 8)
+#define	PINCTRL_PULL4_BANK4_PIN07			(1 << 7)
+#define	PINCTRL_PULL4_BANK4_PIN06			(1 << 6)
+#define	PINCTRL_PULL4_BANK4_PIN05			(1 << 5)
+#define	PINCTRL_PULL4_BANK4_PIN04			(1 << 4)
+#define	PINCTRL_PULL4_BANK4_PIN03			(1 << 3)
+#define	PINCTRL_PULL4_BANK4_PIN02			(1 << 2)
+#define	PINCTRL_PULL4_BANK4_PIN01			(1 << 1)
+#define	PINCTRL_PULL4_BANK4_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL5_BANK5_PIN26			(1 << 26)
+#define	PINCTRL_PULL5_BANK5_PIN23			(1 << 23)
+#define	PINCTRL_PULL5_BANK5_PIN22			(1 << 22)
+#define	PINCTRL_PULL5_BANK5_PIN21			(1 << 21)
+#define	PINCTRL_PULL5_BANK5_PIN20			(1 << 20)
+#define	PINCTRL_PULL5_BANK5_PIN19			(1 << 19)
+#define	PINCTRL_PULL5_BANK5_PIN18			(1 << 18)
+#define	PINCTRL_PULL5_BANK5_PIN17			(1 << 17)
+#define	PINCTRL_PULL5_BANK5_PIN16			(1 << 16)
+#define	PINCTRL_PULL5_BANK5_PIN15			(1 << 15)
+#define	PINCTRL_PULL5_BANK5_PIN14			(1 << 14)
+#define	PINCTRL_PULL5_BANK5_PIN13			(1 << 13)
+#define	PINCTRL_PULL5_BANK5_PIN12			(1 << 12)
+#define	PINCTRL_PULL5_BANK5_PIN11			(1 << 11)
+#define	PINCTRL_PULL5_BANK5_PIN10			(1 << 10)
+#define	PINCTRL_PULL5_BANK5_PIN09			(1 << 9)
+#define	PINCTRL_PULL5_BANK5_PIN08			(1 << 8)
+#define	PINCTRL_PULL5_BANK5_PIN07			(1 << 7)
+#define	PINCTRL_PULL5_BANK5_PIN06			(1 << 6)
+#define	PINCTRL_PULL5_BANK5_PIN05			(1 << 5)
+#define	PINCTRL_PULL5_BANK5_PIN04			(1 << 4)
+#define	PINCTRL_PULL5_BANK5_PIN03			(1 << 3)
+#define	PINCTRL_PULL5_BANK5_PIN02			(1 << 2)
+#define	PINCTRL_PULL5_BANK5_PIN01			(1 << 1)
+#define	PINCTRL_PULL5_BANK5_PIN00			(1 << 0)
+
+#define	PINCTRL_PULL6_BANK6_PIN24			(1 << 24)
+#define	PINCTRL_PULL6_BANK6_PIN23			(1 << 23)
+#define	PINCTRL_PULL6_BANK6_PIN22			(1 << 22)
+#define	PINCTRL_PULL6_BANK6_PIN21			(1 << 21)
+#define	PINCTRL_PULL6_BANK6_PIN20			(1 << 20)
+#define	PINCTRL_PULL6_BANK6_PIN19			(1 << 19)
+#define	PINCTRL_PULL6_BANK6_PIN18			(1 << 18)
+#define	PINCTRL_PULL6_BANK6_PIN17			(1 << 17)
+#define	PINCTRL_PULL6_BANK6_PIN16			(1 << 16)
+#define	PINCTRL_PULL6_BANK6_PIN14			(1 << 14)
+#define	PINCTRL_PULL6_BANK6_PIN13			(1 << 13)
+#define	PINCTRL_PULL6_BANK6_PIN12			(1 << 12)
+#define	PINCTRL_PULL6_BANK6_PIN11			(1 << 11)
+#define	PINCTRL_PULL6_BANK6_PIN10			(1 << 10)
+#define	PINCTRL_PULL6_BANK6_PIN09			(1 << 9)
+#define	PINCTRL_PULL6_BANK6_PIN08			(1 << 8)
+#define	PINCTRL_PULL6_BANK6_PIN07			(1 << 7)
+#define	PINCTRL_PULL6_BANK6_PIN06			(1 << 6)
+#define	PINCTRL_PULL6_BANK6_PIN05			(1 << 5)
+#define	PINCTRL_PULL6_BANK6_PIN04			(1 << 4)
+#define	PINCTRL_PULL6_BANK6_PIN03			(1 << 3)
+#define	PINCTRL_PULL6_BANK6_PIN02			(1 << 2)
+#define	PINCTRL_PULL6_BANK6_PIN01			(1 << 1)
+#define	PINCTRL_PULL6_BANK6_PIN00			(1 << 0)
+
+#define	PINCTRL_DOUT0_DOUT_MASK				0x1fffffff
+#define	PINCTRL_DOUT0_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT1_DOUT_MASK				0xffffffff
+#define	PINCTRL_DOUT1_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT2_DOUT_MASK				0xfffffff
+#define	PINCTRL_DOUT2_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT3_DOUT_MASK				0x7fffffff
+#define	PINCTRL_DOUT3_DOUT_OFFSET			0
+
+#define	PINCTRL_DOUT4_DOUT_MASK				0x1fffff
+#define	PINCTRL_DOUT4_DOUT_OFFSET			0
+
+#define	PINCTRL_DIN0_DIN_MASK				0x1fffffff
+#define	PINCTRL_DIN0_DIN_OFFSET				0
+
+#define	PINCTRL_DIN1_DIN_MASK				0xffffffff
+#define	PINCTRL_DIN1_DIN_OFFSET				0
+
+#define	PINCTRL_DIN2_DIN_MASK				0xfffffff
+#define	PINCTRL_DIN2_DIN_OFFSET				0
+
+#define	PINCTRL_DIN3_DIN_MASK				0x7fffffff
+#define	PINCTRL_DIN3_DIN_OFFSET				0
+
+#define	PINCTRL_DIN4_DIN_MASK				0x1fffff
+#define	PINCTRL_DIN4_DIN_OFFSET				0
+
+#define	PINCTRL_DOE0_DOE_MASK				0x1fffffff
+#define	PINCTRL_DOE0_DOE_OFFSET				0
+
+#define	PINCTRL_DOE1_DOE_MASK				0xffffffff
+#define	PINCTRL_DOE1_DOE_OFFSET				0
+
+#define	PINCTRL_DOE2_DOE_MASK				0xfffffff
+#define	PINCTRL_DOE2_DOE_OFFSET				0
+
+#define	PINCTRL_DOE3_DOE_MASK				0x7fffffff
+#define	PINCTRL_DOE3_DOE_OFFSET				0
+
+#define	PINCTRL_DOE4_DOE_MASK				0x1fffff
+#define	PINCTRL_DOE4_DOE_OFFSET				0
+
+#define	PINCTRL_PIN2IRQ0_PIN2IRQ_MASK			0x1fffffff
+#define	PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ1_PIN2IRQ_MASK			0xffffffff
+#define	PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ2_PIN2IRQ_MASK			0xfffffff
+#define	PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ3_PIN2IRQ_MASK			0x7fffffff
+#define	PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_PIN2IRQ4_PIN2IRQ_MASK			0x1fffff
+#define	PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET			0
+
+#define	PINCTRL_IRQEN0_IRQEN_MASK			0x1fffffff
+#define	PINCTRL_IRQEN0_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN1_IRQEN_MASK			0xffffffff
+#define	PINCTRL_IRQEN1_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN2_IRQEN_MASK			0xfffffff
+#define	PINCTRL_IRQEN2_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN3_IRQEN_MASK			0x7fffffff
+#define	PINCTRL_IRQEN3_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQEN4_IRQEN_MASK			0x1fffff
+#define	PINCTRL_IRQEN4_IRQEN_OFFSET			0
+
+#define	PINCTRL_IRQLEVEL0_IRQLEVEL_MASK			0x1fffffff
+#define	PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL1_IRQLEVEL_MASK			0xffffffff
+#define	PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL2_IRQLEVEL_MASK			0xfffffff
+#define	PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL3_IRQLEVEL_MASK			0x7fffffff
+#define	PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQLEVEL4_IRQLEVEL_MASK			0x1fffff
+#define	PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET		0
+
+#define	PINCTRL_IRQPOL0_IRQPOL_MASK			0x1fffffff
+#define	PINCTRL_IRQPOL0_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL1_IRQPOL_MASK			0xffffffff
+#define	PINCTRL_IRQPOL1_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL2_IRQPOL_MASK			0xfffffff
+#define	PINCTRL_IRQPOL2_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL3_IRQPOL_MASK			0x7fffffff
+#define	PINCTRL_IRQPOL3_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQPOL4_IRQPOL_MASK			0x1fffff
+#define	PINCTRL_IRQPOL4_IRQPOL_OFFSET			0
+
+#define	PINCTRL_IRQSTAT0_IRQSTAT_MASK			0x1fffffff
+#define	PINCTRL_IRQSTAT0_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT1_IRQSTAT_MASK			0xffffffff
+#define	PINCTRL_IRQSTAT1_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT2_IRQSTAT_MASK			0xfffffff
+#define	PINCTRL_IRQSTAT2_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT3_IRQSTAT_MASK			0x7fffffff
+#define	PINCTRL_IRQSTAT3_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_IRQSTAT4_IRQSTAT_MASK			0x1fffff
+#define	PINCTRL_IRQSTAT4_IRQSTAT_OFFSET			0
+
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK		(0x3 << 26)
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET	26
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK		(0x3 << 24)
+#define	PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET	24
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK		(0x3 << 22)
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET	22
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK		(0x3 << 20)
+#define	PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET	20
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK		(0x3 << 18)
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET	18
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK		(0x3 << 16)
+#define	PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET	16
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK		(0x3 << 14)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET	14
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK		(0x3 << 12)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET	12
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK		(0x3 << 10)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET	10
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK		(0x3 << 8)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET	8
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK		(0x3 << 6)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET	6
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK		(0x3 << 4)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET	4
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK		(0x3 << 2)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET	2
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK		(0x3 << 0)
+#define	PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET	0
+
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK		(0x3 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET		16
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR		(0x0 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO		(0x1 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2		(0x2 << 16)
+#define	PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2		(0x3 << 16)
+#define	PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK		(0x3 << 12)
+#define	PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET		12
+#define	PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK		(0x3 << 10)
+#define	PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET		10
+#define	PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK		(0x3 << 8)
+#define	PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET		8
+#define	PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK		(0x3 << 6)
+#define	PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET		6
+#define	PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK		(0x3 << 4)
+#define	PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET		4
+#define	PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK		(0x3 << 2)
+#define	PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET		2
+#define	PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK		(0x3 << 0)
+#define	PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET		0
+
+#endif /* __MX28_REGS_PINCTRL_H__ */

bjos/imx233/arch/regs-power-mx23.h

@@ -0,0 +1,345 @@
+/*
+ * Freescale i.MX23 Power Controller Register Definitions
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX23_REGS_POWER_H__
+#define __MX23_REGS_POWER_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_power_regs {
+	mxs_reg_32(hw_power_ctrl)
+	mxs_reg_32(hw_power_5vctrl)
+	mxs_reg_32(hw_power_minpwr)
+	mxs_reg_32(hw_power_charge)
+	uint32_t	hw_power_vdddctrl;
+	uint32_t	reserved_vddd[3];
+	uint32_t	hw_power_vddactrl;
+	uint32_t	reserved_vdda[3];
+	uint32_t	hw_power_vddioctrl;
+	uint32_t	reserved_vddio[3];
+	uint32_t	hw_power_vddmemctrl;
+	uint32_t	reserved_vddmem[3];
+	uint32_t	hw_power_dcdc4p2;
+	uint32_t	reserved_dcdc4p2[3];
+	uint32_t	hw_power_misc;
+	uint32_t	reserved_misc[3];
+	uint32_t	hw_power_dclimits;
+	uint32_t	reserved_dclimits[3];
+	mxs_reg_32(hw_power_loopctrl)
+	uint32_t	hw_power_sts;
+	uint32_t	reserved_sts[3];
+	mxs_reg_32(hw_power_speed)
+	uint32_t	hw_power_battmonitor;
+	uint32_t	reserved_battmonitor[3];
+
+	uint32_t	reserved1[4];
+
+	mxs_reg_32(hw_power_reset)
+
+	uint32_t	reserved2[4];
+
+	mxs_reg_32(hw_power_special)
+	mxs_reg_32(hw_power_version)
+};
+#endif
+
+#define	POWER_CTRL_CLKGATE				(1 << 30)
+#define	POWER_CTRL_PSWITCH_MID_TRAN			(1 << 27)
+#define	POWER_CTRL_DCDC4P2_BO_IRQ			(1 << 24)
+#define	POWER_CTRL_ENIRQ_DCDC4P2_BO			(1 << 23)
+#define	POWER_CTRL_VDD5V_DROOP_IRQ			(1 << 22)
+#define	POWER_CTRL_ENIRQ_VDD5V_DROOP			(1 << 21)
+#define	POWER_CTRL_PSWITCH_IRQ				(1 << 20)
+#define	POWER_CTRL_PSWITCH_IRQ_SRC			(1 << 19)
+#define	POWER_CTRL_POLARITY_PSWITCH			(1 << 18)
+#define	POWER_CTRL_ENIRQ_PSWITCH			(1 << 17)
+#define	POWER_CTRL_POLARITY_DC_OK			(1 << 16)
+#define	POWER_CTRL_DC_OK_IRQ				(1 << 15)
+#define	POWER_CTRL_ENIRQ_DC_OK				(1 << 14)
+#define	POWER_CTRL_BATT_BO_IRQ				(1 << 13)
+#define	POWER_CTRL_ENIRQ_BATT_BO			(1 << 12)
+#define	POWER_CTRL_VDDIO_BO_IRQ				(1 << 11)
+#define	POWER_CTRL_ENIRQ_VDDIO_BO			(1 << 10)
+#define	POWER_CTRL_VDDA_BO_IRQ				(1 << 9)
+#define	POWER_CTRL_ENIRQ_VDDA_BO			(1 << 8)
+#define	POWER_CTRL_VDDD_BO_IRQ				(1 << 7)
+#define	POWER_CTRL_ENIRQ_VDDD_BO			(1 << 6)
+#define	POWER_CTRL_POLARITY_VBUSVALID			(1 << 5)
+#define	POWER_CTRL_VBUS_VALID_IRQ			(1 << 4)
+#define	POWER_CTRL_ENIRQ_VBUS_VALID			(1 << 3)
+#define	POWER_CTRL_POLARITY_VDD5V_GT_VDDIO		(1 << 2)
+#define	POWER_CTRL_VDD5V_GT_VDDIO_IRQ			(1 << 1)
+#define	POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO			(1 << 0)
+
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_MASK		(0x3 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET		28
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V3			(0x0 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V4			(0x1 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V5			(0x2 << 28)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V7			(0x3 << 28)
+#define	POWER_5VCTRL_HEADROOM_ADJ_MASK			(0x7 << 24)
+#define	POWER_5VCTRL_HEADROOM_ADJ_OFFSET		24
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_MASK		(0x1 << 20)
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET		20
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK		(0x3f << 12)
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET		12
+#define	POWER_5VCTRL_VBUSVALID_TRSH_MASK		(0x7 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_OFFSET		8
+#define	POWER_5VCTRL_VBUSVALID_TRSH_2V9			(0x0 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V0			(0x1 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V1			(0x2 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V2			(0x3 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V3			(0x4 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V4			(0x5 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V5			(0x6 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V6			(0x7 << 8)
+#define	POWER_5VCTRL_PWDN_5VBRNOUT			(1 << 7)
+#define	POWER_5VCTRL_ENABLE_LINREG_ILIMIT		(1 << 6)
+#define	POWER_5VCTRL_DCDC_XFER				(1 << 5)
+#define	POWER_5VCTRL_VBUSVALID_5VDETECT			(1 << 4)
+#define	POWER_5VCTRL_VBUSVALID_TO_B			(1 << 3)
+#define	POWER_5VCTRL_ILIMIT_EQ_ZERO			(1 << 2)
+#define	POWER_5VCTRL_PWRUP_VBUS_CMPS			(1 << 1)
+#define	POWER_5VCTRL_ENABLE_DCDC			(1 << 0)
+
+#define	POWER_MINPWR_LOWPWR_4P2				(1 << 14)
+#define	POWER_MINPWR_VDAC_DUMP_CTRL			(1 << 13)
+#define	POWER_MINPWR_PWD_BO				(1 << 12)
+#define	POWER_MINPWR_USE_VDDXTAL_VBG			(1 << 11)
+#define	POWER_MINPWR_PWD_ANA_CMPS			(1 << 10)
+#define	POWER_MINPWR_ENABLE_OSC				(1 << 9)
+#define	POWER_MINPWR_SELECT_OSC				(1 << 8)
+#define	POWER_MINPWR_VBG_OFF				(1 << 7)
+#define	POWER_MINPWR_DOUBLE_FETS			(1 << 6)
+#define	POWER_MINPWR_HALFFETS				(1 << 5)
+#define	POWER_MINPWR_LESSANA_I				(1 << 4)
+#define	POWER_MINPWR_PWD_XTAL24				(1 << 3)
+#define	POWER_MINPWR_DC_STOPCLK				(1 << 2)
+#define	POWER_MINPWR_EN_DC_PFM				(1 << 1)
+#define	POWER_MINPWR_DC_HALFCLK				(1 << 0)
+
+#define	POWER_CHARGE_ADJ_VOLT_MASK			(0x7 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_OFFSET			24
+#define	POWER_CHARGE_ADJ_VOLT_M025P			(0x1 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P050P			(0x2 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M075P			(0x3 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P025P			(0x4 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M050P			(0x5 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P075P			(0x6 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M100P			(0x7 << 24)
+#define	POWER_CHARGE_ENABLE_LOAD			(1 << 22)
+#define	POWER_CHARGE_ENABLE_CHARGER_RESISTORS		(1 << 21)
+#define	POWER_CHARGE_ENABLE_FAULT_DETECT		(1 << 20)
+#define	POWER_CHARGE_CHRG_STS_OFF			(1 << 19)
+#define	POWER_CHARGE_USE_EXTERN_R			(1 << 17)
+#define	POWER_CHARGE_PWD_BATTCHRG			(1 << 16)
+#define	POWER_CHARGE_STOP_ILIMIT_MASK			(0xf << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_OFFSET			8
+#define	POWER_CHARGE_STOP_ILIMIT_10MA			(0x1 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_20MA			(0x2 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_50MA			(0x4 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_100MA			(0x8 << 8)
+#define	POWER_CHARGE_BATTCHRG_I_MASK			0x3f
+#define	POWER_CHARGE_BATTCHRG_I_OFFSET			0
+#define	POWER_CHARGE_BATTCHRG_I_10MA			0x01
+#define	POWER_CHARGE_BATTCHRG_I_20MA			0x02
+#define	POWER_CHARGE_BATTCHRG_I_50MA			0x04
+#define	POWER_CHARGE_BATTCHRG_I_100MA			0x08
+#define	POWER_CHARGE_BATTCHRG_I_200MA			0x10
+#define	POWER_CHARGE_BATTCHRG_I_400MA			0x20
+
+#define	POWER_VDDDCTRL_ADJTN_MASK			(0xf << 28)
+#define	POWER_VDDDCTRL_ADJTN_OFFSET			28
+#define	POWER_VDDDCTRL_PWDN_BRNOUT			(1 << 23)
+#define	POWER_VDDDCTRL_DISABLE_STEPPING			(1 << 22)
+#define	POWER_VDDDCTRL_ENABLE_LINREG			(1 << 21)
+#define	POWER_VDDDCTRL_DISABLE_FET			(1 << 20)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_MASK		(0x3 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_OFFSET		16
+#define	POWER_VDDDCTRL_LINREG_OFFSET_0STEPS		(0x0 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 16)
+#define	POWER_VDDDCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDDCTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDDCTRL_TRG_MASK				0x1f
+#define	POWER_VDDDCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDACTRL_PWDN_BRNOUT			(1 << 19)
+#define	POWER_VDDACTRL_DISABLE_STEPPING			(1 << 18)
+#define	POWER_VDDACTRL_ENABLE_LINREG			(1 << 17)
+#define	POWER_VDDACTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDACTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDACTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDACTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDACTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDACTRL_TRG_MASK				0x1f
+#define	POWER_VDDACTRL_TRG_OFFSET			0
+
+#define	POWER_VDDIOCTRL_ADJTN_MASK			(0xf << 20)
+#define	POWER_VDDIOCTRL_ADJTN_OFFSET			20
+#define	POWER_VDDIOCTRL_PWDN_BRNOUT			(1 << 18)
+#define	POWER_VDDIOCTRL_DISABLE_STEPPING		(1 << 17)
+#define	POWER_VDDIOCTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDIOCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDIOCTRL_BO_OFFSET_OFFSET		8
+#define	POWER_VDDIOCTRL_TRG_MASK			0x1f
+#define	POWER_VDDIOCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDMEMCTRL_PULLDOWN_ACTIVE		(1 << 10)
+#define	POWER_VDDMEMCTRL_ENABLE_ILIMIT			(1 << 9)
+#define	POWER_VDDMEMCTRL_ENABLE_LINREG			(1 << 8)
+#define	POWER_VDDMEMCTRL_TRG_MASK			0x1f
+#define	POWER_VDDMEMCTRL_TRG_OFFSET			0
+
+#define	POWER_DCDC4P2_DROPOUT_CTRL_MASK			(0xf << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_OFFSET		28
+#define	POWER_DCDC4P2_DROPOUT_CTRL_200MV		(0x3 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_100MV		(0x2 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_50MV			(0x1 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_25MV			(0x0 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2		(0x0 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT	(0x1 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL		(0x2 << 28)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_MASK		(0x3 << 24)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_OFFSET		24
+#define	POWER_DCDC4P2_ENABLE_4P2			(1 << 23)
+#define	POWER_DCDC4P2_ENABLE_DCDC			(1 << 22)
+#define	POWER_DCDC4P2_HYST_DIR				(1 << 21)
+#define	POWER_DCDC4P2_HYST_THRESH			(1 << 20)
+#define	POWER_DCDC4P2_TRG_MASK				(0x7 << 16)
+#define	POWER_DCDC4P2_TRG_OFFSET			16
+#define	POWER_DCDC4P2_TRG_4V2				(0x0 << 16)
+#define	POWER_DCDC4P2_TRG_4V1				(0x1 << 16)
+#define	POWER_DCDC4P2_TRG_4V0				(0x2 << 16)
+#define	POWER_DCDC4P2_TRG_3V9				(0x3 << 16)
+#define	POWER_DCDC4P2_TRG_BATT				(0x4 << 16)
+#define	POWER_DCDC4P2_BO_MASK				(0x1f << 8)
+#define	POWER_DCDC4P2_BO_OFFSET				8
+#define	POWER_DCDC4P2_CMPTRIP_MASK			0x1f
+#define	POWER_DCDC4P2_CMPTRIP_OFFSET			0
+
+#define	POWER_MISC_FREQSEL_MASK				(0x7 << 4)
+#define	POWER_MISC_FREQSEL_OFFSET			4
+#define	POWER_MISC_FREQSEL_20MHZ			(0x1 << 4)
+#define	POWER_MISC_FREQSEL_24MHZ			(0x2 << 4)
+#define	POWER_MISC_FREQSEL_19MHZ			(0x3 << 4)
+#define	POWER_MISC_FREQSEL_14MHZ			(0x4 << 4)
+#define	POWER_MISC_FREQSEL_18MHZ			(0x5 << 4)
+#define	POWER_MISC_FREQSEL_21MHZ			(0x6 << 4)
+#define	POWER_MISC_FREQSEL_17MHZ			(0x7 << 4)
+#define	POWER_MISC_DISABLE_FET_BO_LOGIC			(1 << 3)
+#define	POWER_MISC_DELAY_TIMING				(1 << 2)
+#define	POWER_MISC_TEST					(1 << 1)
+#define	POWER_MISC_SEL_PLLCLK				(1 << 0)
+
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_MASK		(0x7f << 8)
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET		8
+#define	POWER_DCLIMITS_NEGLIMIT_MASK			0x7f
+#define	POWER_DCLIMITS_NEGLIMIT_OFFSET			0
+
+#define	POWER_LOOPCTRL_TOGGLE_DIF			(1 << 20)
+#define	POWER_LOOPCTRL_HYST_SIGN			(1 << 19)
+#define	POWER_LOOPCTRL_EN_CM_HYST			(1 << 18)
+#define	POWER_LOOPCTRL_EN_DF_HYST			(1 << 17)
+#define	POWER_LOOPCTRL_CM_HYST_THRESH			(1 << 16)
+#define	POWER_LOOPCTRL_DF_HYST_THRESH			(1 << 15)
+#define	POWER_LOOPCTRL_RCSCALE_THRESH			(1 << 14)
+#define	POWER_LOOPCTRL_EN_RCSCALE_MASK			(0x3 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_OFFSET		12
+#define	POWER_LOOPCTRL_EN_RCSCALE_DIS			(0x0 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_2X			(0x1 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_4X			(0x2 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_8X			(0x3 << 12)
+#define	POWER_LOOPCTRL_DC_FF_MASK			(0x7 << 8)
+#define	POWER_LOOPCTRL_DC_FF_OFFSET			8
+#define	POWER_LOOPCTRL_DC_R_MASK			(0xf << 4)
+#define	POWER_LOOPCTRL_DC_R_OFFSET			4
+#define	POWER_LOOPCTRL_DC_C_MASK			0x3
+#define	POWER_LOOPCTRL_DC_C_OFFSET			0
+#define	POWER_LOOPCTRL_DC_C_MAX				0x0
+#define	POWER_LOOPCTRL_DC_C_2X				0x1
+#define	POWER_LOOPCTRL_DC_C_4X				0x2
+#define	POWER_LOOPCTRL_DC_C_MIN				0x3
+
+#define	POWER_STS_PWRUP_SOURCE_MASK			(0x3f << 24)
+#define	POWER_STS_PWRUP_SOURCE_OFFSET			24
+#define	POWER_STS_PWRUP_SOURCE_5V			(0x20 << 24)
+#define	POWER_STS_PWRUP_SOURCE_RTC			(0x10 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH		(0x02 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_MID		(0x01 << 24)
+#define	POWER_STS_PSWITCH_MASK				(0x3 << 20)
+#define	POWER_STS_PSWITCH_OFFSET			20
+#define	POWER_STS_AVALID0_STATUS			(1 << 17)
+#define	POWER_STS_BVALID0_STATUS			(1 << 16)
+#define	POWER_STS_VBUSVALID0_STATUS			(1 << 15)
+#define	POWER_STS_SESSEND0_STATUS			(1 << 14)
+#define	POWER_STS_BATT_BO				(1 << 13)
+#define	POWER_STS_VDD5V_FAULT				(1 << 12)
+#define	POWER_STS_CHRGSTS				(1 << 11)
+#define	POWER_STS_DCDC_4P2_BO				(1 << 10)
+#define	POWER_STS_DC_OK					(1 << 9)
+#define	POWER_STS_VDDIO_BO				(1 << 8)
+#define	POWER_STS_VDDA_BO				(1 << 7)
+#define	POWER_STS_VDDD_BO				(1 << 6)
+#define	POWER_STS_VDD5V_GT_VDDIO			(1 << 5)
+#define	POWER_STS_VDD5V_DROOP				(1 << 4)
+#define	POWER_STS_AVALID0				(1 << 3)
+#define	POWER_STS_BVALID0				(1 << 2)
+#define	POWER_STS_VBUSVALID0				(1 << 1)
+#define	POWER_STS_SESSEND0				(1 << 0)
+
+#define	POWER_SPEED_STATUS_MASK				(0xff << 16)
+#define	POWER_SPEED_STATUS_OFFSET			16
+#define	POWER_SPEED_CTRL_MASK				0x3
+#define	POWER_SPEED_CTRL_OFFSET				0
+#define	POWER_SPEED_CTRL_SS_OFF				0x0
+#define	POWER_SPEED_CTRL_SS_ON				0x1
+#define	POWER_SPEED_CTRL_SS_ENABLE			0x3
+
+#define	POWER_BATTMONITOR_BATT_VAL_MASK			(0x3ff << 16)
+#define	POWER_BATTMONITOR_BATT_VAL_OFFSET		16
+#define	POWER_BATTMONITOR_EN_BATADJ			(1 << 10)
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT		(1 << 9)
+#define	POWER_BATTMONITOR_BRWNOUT_PWD			(1 << 8)
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_MASK		0x1f
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET		0
+
+#define	POWER_RESET_UNLOCK_MASK				(0xffff << 16)
+#define	POWER_RESET_UNLOCK_OFFSET			16
+#define	POWER_RESET_UNLOCK_KEY				(0x3e77 << 16)
+#define	POWER_RESET_PWD_OFF				(1 << 1)
+#define	POWER_RESET_PWD					(1 << 0)
+
+#define	POWER_DEBUG_VBUSVALIDPIOLOCK			(1 << 3)
+#define	POWER_DEBUG_AVALIDPIOLOCK			(1 << 2)
+#define	POWER_DEBUG_BVALIDPIOLOCK			(1 << 1)
+#define	POWER_DEBUG_SESSENDPIOLOCK			(1 << 0)
+
+#define	POWER_SPECIAL_TEST_MASK				0xffffffff
+#define	POWER_SPECIAL_TEST_OFFSET			0
+
+#define	POWER_VERSION_MAJOR_MASK			(0xff << 24)
+#define	POWER_VERSION_MAJOR_OFFSET			24
+#define	POWER_VERSION_MINOR_MASK			(0xff << 16)
+#define	POWER_VERSION_MINOR_OFFSET			16
+#define	POWER_VERSION_STEP_MASK				0xffff
+#define	POWER_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX23_REGS_POWER_H__ */

bjos/imx233/arch/regs-power-mx28.h

@@ -0,0 +1,400 @@
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_POWER_H__
+#define __MX28_REGS_POWER_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_power_regs {
+	mxs_reg_32(hw_power_ctrl)
+	mxs_reg_32(hw_power_5vctrl)
+	mxs_reg_32(hw_power_minpwr)
+	mxs_reg_32(hw_power_charge)
+	uint32_t	hw_power_vdddctrl;
+	uint32_t	reserved_vddd[3];
+	uint32_t	hw_power_vddactrl;
+	uint32_t	reserved_vdda[3];
+	uint32_t	hw_power_vddioctrl;
+	uint32_t	reserved_vddio[3];
+	uint32_t	hw_power_vddmemctrl;
+	uint32_t	reserved_vddmem[3];
+	uint32_t	hw_power_dcdc4p2;
+	uint32_t	reserved_dcdc4p2[3];
+	uint32_t	hw_power_misc;
+	uint32_t	reserved_misc[3];
+	uint32_t	hw_power_dclimits;
+	uint32_t	reserved_dclimits[3];
+	mxs_reg_32(hw_power_loopctrl)
+	uint32_t	hw_power_sts;
+	uint32_t	reserved_sts[3];
+	mxs_reg_32(hw_power_speed)
+	uint32_t	hw_power_battmonitor;
+	uint32_t	reserved_battmonitor[3];
+
+	uint32_t	reserved[4];
+
+	mxs_reg_32(hw_power_reset)
+	mxs_reg_32(hw_power_debug)
+	mxs_reg_32(hw_power_thermal)
+	mxs_reg_32(hw_power_usb1ctrl)
+	mxs_reg_32(hw_power_special)
+	mxs_reg_32(hw_power_version)
+	mxs_reg_32(hw_power_anaclkctrl)
+	mxs_reg_32(hw_power_refctrl)
+};
+#endif
+
+#define	POWER_CTRL_PSWITCH_MID_TRAN			(1 << 27)
+#define	POWER_CTRL_DCDC4P2_BO_IRQ			(1 << 24)
+#define	POWER_CTRL_ENIRQ_DCDC4P2_BO			(1 << 23)
+#define	POWER_CTRL_VDD5V_DROOP_IRQ			(1 << 22)
+#define	POWER_CTRL_ENIRQ_VDD5V_DROOP			(1 << 21)
+#define	POWER_CTRL_PSWITCH_IRQ				(1 << 20)
+#define	POWER_CTRL_PSWITCH_IRQ_SRC			(1 << 19)
+#define	POWER_CTRL_POLARITY_PSWITCH			(1 << 18)
+#define	POWER_CTRL_ENIRQ_PSWITCH			(1 << 17)
+#define	POWER_CTRL_POLARITY_DC_OK			(1 << 16)
+#define	POWER_CTRL_DC_OK_IRQ				(1 << 15)
+#define	POWER_CTRL_ENIRQ_DC_OK				(1 << 14)
+#define	POWER_CTRL_BATT_BO_IRQ				(1 << 13)
+#define	POWER_CTRL_ENIRQ_BATT_BO			(1 << 12)
+#define	POWER_CTRL_VDDIO_BO_IRQ				(1 << 11)
+#define	POWER_CTRL_ENIRQ_VDDIO_BO			(1 << 10)
+#define	POWER_CTRL_VDDA_BO_IRQ				(1 << 9)
+#define	POWER_CTRL_ENIRQ_VDDA_BO			(1 << 8)
+#define	POWER_CTRL_VDDD_BO_IRQ				(1 << 7)
+#define	POWER_CTRL_ENIRQ_VDDD_BO			(1 << 6)
+#define	POWER_CTRL_POLARITY_VBUSVALID			(1 << 5)
+#define	POWER_CTRL_VBUS_VALID_IRQ			(1 << 4)
+#define	POWER_CTRL_ENIRQ_VBUS_VALID			(1 << 3)
+#define	POWER_CTRL_POLARITY_VDD5V_GT_VDDIO		(1 << 2)
+#define	POWER_CTRL_VDD5V_GT_VDDIO_IRQ			(1 << 1)
+#define	POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO			(1 << 0)
+
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_MASK		(0x3 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET		30
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V3			(0x0 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V4			(0x1 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V5			(0x2 << 30)
+#define	POWER_5VCTRL_VBUSDROOP_TRSH_4V7			(0x3 << 30)
+#define	POWER_5VCTRL_HEADROOM_ADJ_MASK			(0x7 << 24)
+#define	POWER_5VCTRL_HEADROOM_ADJ_OFFSET		24
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_MASK		(0x3 << 20)
+#define	POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET		20
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK		(0x3f << 12)
+#define	POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET		12
+#define	POWER_5VCTRL_VBUSVALID_TRSH_MASK		(0x7 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_OFFSET		8
+#define	POWER_5VCTRL_VBUSVALID_TRSH_2V9			(0x0 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V0			(0x1 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V1			(0x2 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V2			(0x3 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V3			(0x4 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V4			(0x5 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V5			(0x6 << 8)
+#define	POWER_5VCTRL_VBUSVALID_TRSH_4V6			(0x7 << 8)
+#define	POWER_5VCTRL_PWDN_5VBRNOUT			(1 << 7)
+#define	POWER_5VCTRL_ENABLE_LINREG_ILIMIT		(1 << 6)
+#define	POWER_5VCTRL_DCDC_XFER				(1 << 5)
+#define	POWER_5VCTRL_VBUSVALID_5VDETECT			(1 << 4)
+#define	POWER_5VCTRL_VBUSVALID_TO_B			(1 << 3)
+#define	POWER_5VCTRL_ILIMIT_EQ_ZERO			(1 << 2)
+#define	POWER_5VCTRL_PWRUP_VBUS_CMPS			(1 << 1)
+#define	POWER_5VCTRL_ENABLE_DCDC			(1 << 0)
+
+#define	POWER_MINPWR_LOWPWR_4P2				(1 << 14)
+#define	POWER_MINPWR_PWD_BO				(1 << 12)
+#define	POWER_MINPWR_USE_VDDXTAL_VBG			(1 << 11)
+#define	POWER_MINPWR_PWD_ANA_CMPS			(1 << 10)
+#define	POWER_MINPWR_ENABLE_OSC				(1 << 9)
+#define	POWER_MINPWR_SELECT_OSC				(1 << 8)
+#define	POWER_MINPWR_VBG_OFF				(1 << 7)
+#define	POWER_MINPWR_DOUBLE_FETS			(1 << 6)
+#define	POWER_MINPWR_HALFFETS				(1 << 5)
+#define	POWER_MINPWR_LESSANA_I				(1 << 4)
+#define	POWER_MINPWR_PWD_XTAL24				(1 << 3)
+#define	POWER_MINPWR_DC_STOPCLK				(1 << 2)
+#define	POWER_MINPWR_EN_DC_PFM				(1 << 1)
+#define	POWER_MINPWR_DC_HALFCLK				(1 << 0)
+
+#define	POWER_CHARGE_ADJ_VOLT_MASK			(0x7 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_OFFSET			24
+#define	POWER_CHARGE_ADJ_VOLT_M025P			(0x1 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P050P			(0x2 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M075P			(0x3 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P025P			(0x4 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M050P			(0x5 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_P075P			(0x6 << 24)
+#define	POWER_CHARGE_ADJ_VOLT_M100P			(0x7 << 24)
+#define	POWER_CHARGE_ENABLE_LOAD			(1 << 22)
+#define	POWER_CHARGE_ENABLE_FAULT_DETECT		(1 << 20)
+#define	POWER_CHARGE_CHRG_STS_OFF			(1 << 19)
+#define	POWER_CHARGE_LIION_4P1				(1 << 18)
+#define	POWER_CHARGE_PWD_BATTCHRG			(1 << 16)
+#define	POWER_CHARGE_ENABLE_CHARGER_USB1		(1 << 13)
+#define	POWER_CHARGE_ENABLE_CHARGER_USB0		(1 << 12)
+#define	POWER_CHARGE_STOP_ILIMIT_MASK			(0xf << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_OFFSET			8
+#define	POWER_CHARGE_STOP_ILIMIT_10MA			(0x1 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_20MA			(0x2 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_50MA			(0x4 << 8)
+#define	POWER_CHARGE_STOP_ILIMIT_100MA			(0x8 << 8)
+#define	POWER_CHARGE_BATTCHRG_I_MASK			0x3f
+#define	POWER_CHARGE_BATTCHRG_I_OFFSET			0
+#define	POWER_CHARGE_BATTCHRG_I_10MA			0x01
+#define	POWER_CHARGE_BATTCHRG_I_20MA			0x02
+#define	POWER_CHARGE_BATTCHRG_I_50MA			0x04
+#define	POWER_CHARGE_BATTCHRG_I_100MA			0x08
+#define	POWER_CHARGE_BATTCHRG_I_200MA			0x10
+#define	POWER_CHARGE_BATTCHRG_I_400MA			0x20
+
+#define	POWER_VDDDCTRL_ADJTN_MASK			(0xf << 28)
+#define	POWER_VDDDCTRL_ADJTN_OFFSET			28
+#define	POWER_VDDDCTRL_PWDN_BRNOUT			(1 << 23)
+#define	POWER_VDDDCTRL_DISABLE_STEPPING			(1 << 22)
+#define	POWER_VDDDCTRL_ENABLE_LINREG			(1 << 21)
+#define	POWER_VDDDCTRL_DISABLE_FET			(1 << 20)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_MASK		(0x3 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_OFFSET		16
+#define	POWER_VDDDCTRL_LINREG_OFFSET_0STEPS		(0x0 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 16)
+#define	POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 16)
+#define	POWER_VDDDCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDDCTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDDCTRL_TRG_MASK				0x1f
+#define	POWER_VDDDCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDACTRL_PWDN_BRNOUT			(1 << 19)
+#define	POWER_VDDACTRL_DISABLE_STEPPING			(1 << 18)
+#define	POWER_VDDACTRL_ENABLE_LINREG			(1 << 17)
+#define	POWER_VDDACTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDACTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDACTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDACTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDACTRL_BO_OFFSET_OFFSET			8
+#define	POWER_VDDACTRL_TRG_MASK				0x1f
+#define	POWER_VDDACTRL_TRG_OFFSET			0
+
+#define	POWER_VDDIOCTRL_ADJTN_MASK			(0xf << 20)
+#define	POWER_VDDIOCTRL_ADJTN_OFFSET			20
+#define	POWER_VDDIOCTRL_PWDN_BRNOUT			(1 << 18)
+#define	POWER_VDDIOCTRL_DISABLE_STEPPING		(1 << 17)
+#define	POWER_VDDIOCTRL_DISABLE_FET			(1 << 16)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_MASK		(0x3 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET		12
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS		(0x0 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE	(0x1 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW	(0x2 << 12)
+#define	POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW	(0x3 << 12)
+#define	POWER_VDDIOCTRL_BO_OFFSET_MASK			(0x7 << 8)
+#define	POWER_VDDIOCTRL_BO_OFFSET_OFFSET		8
+#define	POWER_VDDIOCTRL_TRG_MASK			0x1f
+#define	POWER_VDDIOCTRL_TRG_OFFSET			0
+
+#define	POWER_VDDMEMCTRL_PULLDOWN_ACTIVE		(1 << 10)
+#define	POWER_VDDMEMCTRL_ENABLE_ILIMIT			(1 << 9)
+#define	POWER_VDDMEMCTRL_ENABLE_LINREG			(1 << 8)
+#define	POWER_VDDMEMCTRL_BO_OFFSET_MASK			(0x7 << 5)
+#define	POWER_VDDMEMCTRL_BO_OFFSET_OFFSET		5
+#define	POWER_VDDMEMCTRL_TRG_MASK			0x1f
+#define	POWER_VDDMEMCTRL_TRG_OFFSET			0
+
+#define	POWER_DCDC4P2_DROPOUT_CTRL_MASK			(0xf << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_OFFSET		28
+#define	POWER_DCDC4P2_DROPOUT_CTRL_200MV		(0x3 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_100MV		(0x2 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_50MV			(0x1 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_25MV			(0x0 << 30)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2		(0x0 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT	(0x1 << 28)
+#define	POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL		(0x2 << 28)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_MASK		(0x3 << 24)
+#define	POWER_DCDC4P2_ISTEAL_THRESH_OFFSET		24
+#define	POWER_DCDC4P2_ENABLE_4P2			(1 << 23)
+#define	POWER_DCDC4P2_ENABLE_DCDC			(1 << 22)
+#define	POWER_DCDC4P2_HYST_DIR				(1 << 21)
+#define	POWER_DCDC4P2_HYST_THRESH			(1 << 20)
+#define	POWER_DCDC4P2_TRG_MASK				(0x7 << 16)
+#define	POWER_DCDC4P2_TRG_OFFSET			16
+#define	POWER_DCDC4P2_TRG_4V2				(0x0 << 16)
+#define	POWER_DCDC4P2_TRG_4V1				(0x1 << 16)
+#define	POWER_DCDC4P2_TRG_4V0				(0x2 << 16)
+#define	POWER_DCDC4P2_TRG_3V9				(0x3 << 16)
+#define	POWER_DCDC4P2_TRG_BATT				(0x4 << 16)
+#define	POWER_DCDC4P2_BO_MASK				(0x1f << 8)
+#define	POWER_DCDC4P2_BO_OFFSET				8
+#define	POWER_DCDC4P2_CMPTRIP_MASK			0x1f
+#define	POWER_DCDC4P2_CMPTRIP_OFFSET			0
+
+#define	POWER_MISC_FREQSEL_MASK				(0x7 << 4)
+#define	POWER_MISC_FREQSEL_OFFSET			4
+#define	POWER_MISC_FREQSEL_20MHZ			(0x1 << 4)
+#define	POWER_MISC_FREQSEL_24MHZ			(0x2 << 4)
+#define	POWER_MISC_FREQSEL_19MHZ			(0x3 << 4)
+#define	POWER_MISC_FREQSEL_14MHZ			(0x4 << 4)
+#define	POWER_MISC_FREQSEL_18MHZ			(0x5 << 4)
+#define	POWER_MISC_FREQSEL_21MHZ			(0x6 << 4)
+#define	POWER_MISC_FREQSEL_17MHZ			(0x7 << 4)
+#define	POWER_MISC_DISABLE_FET_BO_LOGIC			(1 << 3)
+#define	POWER_MISC_DELAY_TIMING				(1 << 2)
+#define	POWER_MISC_TEST					(1 << 1)
+#define	POWER_MISC_SEL_PLLCLK				(1 << 0)
+
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_MASK		(0x7f << 8)
+#define	POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET		8
+#define	POWER_DCLIMITS_NEGLIMIT_MASK			0x7f
+#define	POWER_DCLIMITS_NEGLIMIT_OFFSET			0
+
+#define	POWER_LOOPCTRL_TOGGLE_DIF			(1 << 20)
+#define	POWER_LOOPCTRL_HYST_SIGN			(1 << 19)
+#define	POWER_LOOPCTRL_EN_CM_HYST			(1 << 18)
+#define	POWER_LOOPCTRL_EN_DF_HYST			(1 << 17)
+#define	POWER_LOOPCTRL_CM_HYST_THRESH			(1 << 16)
+#define	POWER_LOOPCTRL_DF_HYST_THRESH			(1 << 15)
+#define	POWER_LOOPCTRL_RCSCALE_THRESH			(1 << 14)
+#define	POWER_LOOPCTRL_EN_RCSCALE_MASK			(0x3 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_OFFSET		12
+#define	POWER_LOOPCTRL_EN_RCSCALE_DIS			(0x0 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_2X			(0x1 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_4X			(0x2 << 12)
+#define	POWER_LOOPCTRL_EN_RCSCALE_8X			(0x3 << 12)
+#define	POWER_LOOPCTRL_DC_FF_MASK			(0x7 << 8)
+#define	POWER_LOOPCTRL_DC_FF_OFFSET			8
+#define	POWER_LOOPCTRL_DC_R_MASK			(0xf << 4)
+#define	POWER_LOOPCTRL_DC_R_OFFSET			4
+#define	POWER_LOOPCTRL_DC_C_MASK			0x3
+#define	POWER_LOOPCTRL_DC_C_OFFSET			0
+#define	POWER_LOOPCTRL_DC_C_MAX				0x0
+#define	POWER_LOOPCTRL_DC_C_2X				0x1
+#define	POWER_LOOPCTRL_DC_C_4X				0x2
+#define	POWER_LOOPCTRL_DC_C_MIN				0x3
+
+#define	POWER_STS_PWRUP_SOURCE_MASK			(0x3f << 24)
+#define	POWER_STS_PWRUP_SOURCE_OFFSET			24
+#define	POWER_STS_PWRUP_SOURCE_5V			(0x20 << 24)
+#define	POWER_STS_PWRUP_SOURCE_RTC			(0x10 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH		(0x02 << 24)
+#define	POWER_STS_PWRUP_SOURCE_PSWITCH_MID		(0x01 << 24)
+#define	POWER_STS_PSWITCH_MASK				(0x3 << 20)
+#define	POWER_STS_PSWITCH_OFFSET			20
+#define	POWER_STS_THERMAL_WARNING			(1 << 19)
+#define	POWER_STS_VDDMEM_BO				(1 << 18)
+#define	POWER_STS_AVALID0_STATUS			(1 << 17)
+#define	POWER_STS_BVALID0_STATUS			(1 << 16)
+#define	POWER_STS_VBUSVALID0_STATUS			(1 << 15)
+#define	POWER_STS_SESSEND0_STATUS			(1 << 14)
+#define	POWER_STS_BATT_BO				(1 << 13)
+#define	POWER_STS_VDD5V_FAULT				(1 << 12)
+#define	POWER_STS_CHRGSTS				(1 << 11)
+#define	POWER_STS_DCDC_4P2_BO				(1 << 10)
+#define	POWER_STS_DC_OK					(1 << 9)
+#define	POWER_STS_VDDIO_BO				(1 << 8)
+#define	POWER_STS_VDDA_BO				(1 << 7)
+#define	POWER_STS_VDDD_BO				(1 << 6)
+#define	POWER_STS_VDD5V_GT_VDDIO			(1 << 5)
+#define	POWER_STS_VDD5V_DROOP				(1 << 4)
+#define	POWER_STS_AVALID0				(1 << 3)
+#define	POWER_STS_BVALID0				(1 << 2)
+#define	POWER_STS_VBUSVALID0				(1 << 1)
+#define	POWER_STS_SESSEND0				(1 << 0)
+
+#define	POWER_SPEED_STATUS_MASK				(0xffff << 8)
+#define	POWER_SPEED_STATUS_OFFSET			8
+#define	POWER_SPEED_STATUS_SEL_MASK			(0x3 << 6)
+#define	POWER_SPEED_STATUS_SEL_OFFSET			6
+#define	POWER_SPEED_STATUS_SEL_DCDC_STAT		(0x0 << 6)
+#define	POWER_SPEED_STATUS_SEL_CORE_STAT		(0x1 << 6)
+#define	POWER_SPEED_STATUS_SEL_ARM_STAT			(0x2 << 6)
+#define	POWER_SPEED_CTRL_MASK				0x3
+#define	POWER_SPEED_CTRL_OFFSET				0
+#define	POWER_SPEED_CTRL_SS_OFF				0x0
+#define	POWER_SPEED_CTRL_SS_ON				0x1
+#define	POWER_SPEED_CTRL_SS_ENABLE			0x3
+
+#define	POWER_BATTMONITOR_BATT_VAL_MASK			(0x3ff << 16)
+#define	POWER_BATTMONITOR_BATT_VAL_OFFSET		16
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN	(1 << 11)
+#define	POWER_BATTMONITOR_EN_BATADJ			(1 << 10)
+#define	POWER_BATTMONITOR_PWDN_BATTBRNOUT		(1 << 9)
+#define	POWER_BATTMONITOR_BRWNOUT_PWD			(1 << 8)
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_MASK		0x1f
+#define	POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET		0
+
+#define	POWER_RESET_UNLOCK_MASK				(0xffff << 16)
+#define	POWER_RESET_UNLOCK_OFFSET			16
+#define	POWER_RESET_UNLOCK_KEY				(0x3e77 << 16)
+#define	POWER_RESET_FASTFALL_PSWITCH_OFF		(1 << 2)
+#define	POWER_RESET_PWD_OFF				(1 << 1)
+#define	POWER_RESET_PWD					(1 << 0)
+
+#define	POWER_DEBUG_VBUSVALIDPIOLOCK			(1 << 3)
+#define	POWER_DEBUG_AVALIDPIOLOCK			(1 << 2)
+#define	POWER_DEBUG_BVALIDPIOLOCK			(1 << 1)
+#define	POWER_DEBUG_SESSENDPIOLOCK			(1 << 0)
+
+#define	POWER_THERMAL_TEST				(1 << 8)
+#define	POWER_THERMAL_PWD				(1 << 7)
+#define	POWER_THERMAL_LOW_POWER				(1 << 6)
+#define	POWER_THERMAL_OFFSET_ADJ_MASK			(0x3 << 4)
+#define	POWER_THERMAL_OFFSET_ADJ_OFFSET			4
+#define	POWER_THERMAL_OFFSET_ADJ_ENABLE			(1 << 3)
+#define	POWER_THERMAL_TEMP_THRESHOLD_MASK		0x7
+#define	POWER_THERMAL_TEMP_THRESHOLD_OFFSET		0
+
+#define	POWER_USB1CTRL_AVALID1				(1 << 3)
+#define	POWER_USB1CTRL_BVALID1				(1 << 2)
+#define	POWER_USB1CTRL_VBUSVALID1			(1 << 1)
+#define	POWER_USB1CTRL_SESSEND1				(1 << 0)
+
+#define	POWER_SPECIAL_TEST_MASK				0xffffffff
+#define	POWER_SPECIAL_TEST_OFFSET			0
+
+#define	POWER_VERSION_MAJOR_MASK			(0xff << 24)
+#define	POWER_VERSION_MAJOR_OFFSET			24
+#define	POWER_VERSION_MINOR_MASK			(0xff << 16)
+#define	POWER_VERSION_MINOR_OFFSET			16
+#define	POWER_VERSION_STEP_MASK				0xffff
+#define	POWER_VERSION_STEP_OFFSET			0
+
+#define	POWER_ANACLKCTRL_CLKGATE_0			(1 << 31)
+#define	POWER_ANACLKCTRL_OUTDIV_MASK			(0x7 << 28)
+#define	POWER_ANACLKCTRL_OUTDIV_OFFSET			28
+#define	POWER_ANACLKCTRL_INVERT_OUTCLK			(1 << 27)
+#define	POWER_ANACLKCTRL_CLKGATE_I			(1 << 26)
+#define	POWER_ANACLKCTRL_DITHER_OFF			(1 << 10)
+#define	POWER_ANACLKCTRL_SLOW_DITHER			(1 << 9)
+#define	POWER_ANACLKCTRL_INVERT_INCLK			(1 << 8)
+#define	POWER_ANACLKCTRL_INCLK_SHIFT_MASK		(0x3 << 4)
+#define	POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET		4
+#define	POWER_ANACLKCTRL_INDIV_MASK			0x7
+#define	POWER_ANACLKCTRL_INDIV_OFFSET			0
+
+#define	POWER_REFCTRL_FASTSETTLING			(1 << 26)
+#define	POWER_REFCTRL_RAISE_REF				(1 << 25)
+#define	POWER_REFCTRL_XTAL_BGR_BIAS			(1 << 24)
+#define	POWER_REFCTRL_VBG_ADJ_MASK			(0x7 << 20)
+#define	POWER_REFCTRL_VBG_ADJ_OFFSET			20
+#define	POWER_REFCTRL_LOW_PWR				(1 << 19)
+#define	POWER_REFCTRL_BIAS_CTRL_MASK			(0x3 << 16)
+#define	POWER_REFCTRL_BIAS_CTRL_OFFSET			16
+#define	POWER_REFCTRL_VDDXTAL_TO_VDDD			(1 << 14)
+#define	POWER_REFCTRL_ADJ_ANA				(1 << 13)
+#define	POWER_REFCTRL_ADJ_VAG				(1 << 12)
+#define	POWER_REFCTRL_ANA_REFVAL_MASK			(0xf << 8)
+#define	POWER_REFCTRL_ANA_REFVAL_OFFSET			8
+#define	POWER_REFCTRL_VAG_VAL_MASK			(0xf << 4)
+#define	POWER_REFCTRL_VAG_VAL_OFFSET			4
+
+#endif	/* __MX28_REGS_POWER_H__ */

bjos/imx233/arch/regs-rtc.h

@@ -0,0 +1,134 @@
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_RTC_H__
+#define __MX28_REGS_RTC_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_rtc_regs {
+	mxs_reg_32(hw_rtc_ctrl)
+	mxs_reg_32(hw_rtc_stat)
+	mxs_reg_32(hw_rtc_milliseconds)
+	mxs_reg_32(hw_rtc_seconds)
+	mxs_reg_32(hw_rtc_rtc_alarm)
+	mxs_reg_32(hw_rtc_watchdog)
+	mxs_reg_32(hw_rtc_persistent0)
+	mxs_reg_32(hw_rtc_persistent1)
+	mxs_reg_32(hw_rtc_persistent2)
+	mxs_reg_32(hw_rtc_persistent3)
+	mxs_reg_32(hw_rtc_persistent4)
+	mxs_reg_32(hw_rtc_persistent5)
+	mxs_reg_32(hw_rtc_debug)
+	mxs_reg_32(hw_rtc_version)
+};
+#endif
+
+#define	RTC_CTRL_SFTRST				(1 << 31)
+#define	RTC_CTRL_CLKGATE			(1 << 30)
+#define	RTC_CTRL_SUPPRESS_COPY2ANALOG		(1 << 6)
+#define	RTC_CTRL_FORCE_UPDATE			(1 << 5)
+#define	RTC_CTRL_WATCHDOGEN			(1 << 4)
+#define	RTC_CTRL_ONEMSEC_IRQ			(1 << 3)
+#define	RTC_CTRL_ALARM_IRQ			(1 << 2)
+#define	RTC_CTRL_ONEMSEC_IRQ_EN			(1 << 1)
+#define	RTC_CTRL_ALARM_IRQ_EN			(1 << 0)
+
+#define	RTC_STAT_RTC_PRESENT			(1 << 31)
+#define	RTC_STAT_ALARM_PRESENT			(1 << 30)
+#define	RTC_STAT_WATCHDOG_PRESENT		(1 << 29)
+#define	RTC_STAT_XTAL32000_PRESENT		(1 << 28)
+#define	RTC_STAT_XTAL32768_PRESENT		(1 << 27)
+#define	RTC_STAT_STALE_REGS_MASK		(0xff << 16)
+#define	RTC_STAT_STALE_REGS_OFFSET		16
+#define	RTC_STAT_NEW_REGS_MASK			(0xff << 8)
+#define	RTC_STAT_NEW_REGS_OFFSET		8
+
+#define	RTC_MILLISECONDS_COUNT_MASK		0xffffffff
+#define	RTC_MILLISECONDS_COUNT_OFFSET		0
+
+#define	RTC_SECONDS_COUNT_MASK			0xffffffff
+#define	RTC_SECONDS_COUNT_OFFSET		0
+
+#define	RTC_ALARM_VALUE_MASK			0xffffffff
+#define	RTC_ALARM_VALUE_OFFSET			0
+
+#define	RTC_WATCHDOG_COUNT_MASK			0xffffffff
+#define	RTC_WATCHDOG_COUNT_OFFSET		0
+
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK	(0xf << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET	28
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83	(0x0 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78	(0x1 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73	(0x2 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68	(0x3 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62	(0x4 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57	(0x5 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52	(0x6 << 28)
+#define	RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48	(0x7 << 28)
+#define	RTC_PERSISTENT0_EXTERNAL_RESET		(1 << 21)
+#define	RTC_PERSISTENT0_THERMAL_RESET		(1 << 20)
+#define	RTC_PERSISTENT0_ENABLE_LRADC_PWRUP	(1 << 18)
+#define	RTC_PERSISTENT0_AUTO_RESTART		(1 << 17)
+#define	RTC_PERSISTENT0_DISABLE_PSWITCH		(1 << 16)
+#define	RTC_PERSISTENT0_LOWERBIAS_MASK		(0xf << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_OFFSET	14
+#define	RTC_PERSISTENT0_LOWERBIAS_NOMINAL	(0x0 << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_M25P		(0x1 << 14)
+#define	RTC_PERSISTENT0_LOWERBIAS_M50P		(0x3 << 14)
+#define	RTC_PERSISTENT0_DISABLE_XTALOK		(1 << 13)
+#define	RTC_PERSISTENT0_MSEC_RES_MASK		(0x1f << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_OFFSET		8
+#define	RTC_PERSISTENT0_MSEC_RES_1MS		(0x01 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_2MS		(0x02 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_4MS		(0x04 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_8MS		(0x08 << 8)
+#define	RTC_PERSISTENT0_MSEC_RES_16MS		(0x10 << 8)
+#define	RTC_PERSISTENT0_ALARM_WAKE		(1 << 7)
+#define	RTC_PERSISTENT0_XTAL32_FREQ		(1 << 6)
+#define	RTC_PERSISTENT0_XTAL32KHZ_PWRUP		(1 << 5)
+#define	RTC_PERSISTENT0_XTAL24KHZ_PWRUP		(1 << 4)
+#define	RTC_PERSISTENT0_LCK_SECS		(1 << 3)
+#define	RTC_PERSISTENT0_ALARM_EN		(1 << 2)
+#define	RTC_PERSISTENT0_ALARM_WAKE_EN		(1 << 1)
+#define	RTC_PERSISTENT0_CLOCKSOURCE		(1 << 0)
+
+#define	RTC_PERSISTENT1_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT1_GENERAL_OFFSET		0
+#define	RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE	0x0080
+#define	RTC_PERSISTENT1_GENERAL_OTG_HNP		0x0100
+#define	RTC_PERSISTENT1_GENERAL_USB_LPM		0x0200
+#define	RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK	0x0400
+#define	RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER	0x0800
+#define	RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X	0x1000
+
+#define	RTC_PERSISTENT2_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT2_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT3_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT3_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT4_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT4_GENERAL_OFFSET		0
+
+#define	RTC_PERSISTENT5_GENERAL_MASK		0xffffffff
+#define	RTC_PERSISTENT5_GENERAL_OFFSET		0
+
+#define	RTC_DEBUG_WATCHDOG_RESET_MASK		(1 << 1)
+#define	RTC_DEBUG_WATCHDOG_RESET		(1 << 0)
+
+#define	RTC_VERSION_MAJOR_MASK			(0xff << 24)
+#define	RTC_VERSION_MAJOR_OFFSET		24
+#define	RTC_VERSION_MINOR_MASK			(0xff << 16)
+#define	RTC_VERSION_MINOR_OFFSET		16
+#define	RTC_VERSION_STEP_MASK			0xffff
+#define	RTC_VERSION_STEP_OFFSET			0
+
+#endif	/* __MX28_REGS_RTC_H__ */

bjos/imx233/arch/regs-ssp.h

@@ -0,0 +1,416 @@
+/*
+ * Freescale i.MX28 SSP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_SSP_H__
+#define __MX28_REGS_SSP_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+#if defined(CONFIG_MX23)
+struct mxs_ssp_regs {
+	mxs_reg_32(hw_ssp_ctrl0)
+	mxs_reg_32(hw_ssp_cmd0)
+	mxs_reg_32(hw_ssp_cmd1)
+	mxs_reg_32(hw_ssp_compref)
+	mxs_reg_32(hw_ssp_compmask)
+	mxs_reg_32(hw_ssp_timing)
+	mxs_reg_32(hw_ssp_ctrl1)
+	mxs_reg_32(hw_ssp_data)
+	mxs_reg_32(hw_ssp_sdresp0)
+	mxs_reg_32(hw_ssp_sdresp1)
+	mxs_reg_32(hw_ssp_sdresp2)
+	mxs_reg_32(hw_ssp_sdresp3)
+	mxs_reg_32(hw_ssp_status)
+
+	uint32_t	reserved1[12];
+
+	mxs_reg_32(hw_ssp_debug)
+	mxs_reg_32(hw_ssp_version)
+};
+#elif defined(CONFIG_MX28)
+struct mxs_ssp_regs {
+	mxs_reg_32(hw_ssp_ctrl0)
+	mxs_reg_32(hw_ssp_cmd0)
+	mxs_reg_32(hw_ssp_cmd1)
+	mxs_reg_32(hw_ssp_xfer_size)
+	mxs_reg_32(hw_ssp_block_size)
+	mxs_reg_32(hw_ssp_compref)
+	mxs_reg_32(hw_ssp_compmask)
+	mxs_reg_32(hw_ssp_timing)
+	mxs_reg_32(hw_ssp_ctrl1)
+	mxs_reg_32(hw_ssp_data)
+	mxs_reg_32(hw_ssp_sdresp0)
+	mxs_reg_32(hw_ssp_sdresp1)
+	mxs_reg_32(hw_ssp_sdresp2)
+	mxs_reg_32(hw_ssp_sdresp3)
+	mxs_reg_32(hw_ssp_ddr_ctrl)
+	mxs_reg_32(hw_ssp_dll_ctrl)
+	mxs_reg_32(hw_ssp_status)
+	mxs_reg_32(hw_ssp_dll_sts)
+	mxs_reg_32(hw_ssp_debug)
+	mxs_reg_32(hw_ssp_version)
+};
+#endif
+
+static inline int mxs_ssp_bus_id_valid(int bus)
+{
+#if defined(CONFIG_MX23)
+	const unsigned int mxs_ssp_chan_count = 2;
+#elif defined(CONFIG_MX28)
+	const unsigned int mxs_ssp_chan_count = 4;
+#endif
+
+	if (bus >= mxs_ssp_chan_count)
+		return 0;
+
+	if (bus < 0)
+		return 0;
+
+	return 1;
+}
+
+static inline int mxs_ssp_clock_by_bus(unsigned int clock)
+{
+#if defined(CONFIG_MX23)
+	return 0;
+#elif defined(CONFIG_MX28)
+	return clock;
+#endif
+}
+
+static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
+{
+	switch (port) {
+	case 0:
+		return (struct mxs_ssp_regs *)MXS_SSP0_BASE;
+	case 1:
+		return (struct mxs_ssp_regs *)MXS_SSP1_BASE;
+#ifdef CONFIG_MX28
+	case 2:
+		return (struct mxs_ssp_regs *)MXS_SSP2_BASE;
+	case 3:
+		return (struct mxs_ssp_regs *)MXS_SSP3_BASE;
+#endif
+	default:
+		return NULL;
+	}
+}
+#endif
+
+#define	SSP_CTRL0_SFTRST			(1 << 31)
+#define	SSP_CTRL0_CLKGATE			(1 << 30)
+#define	SSP_CTRL0_RUN				(1 << 29)
+#define	SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
+#define	SSP_CTRL0_LOCK_CS			(1 << 27)
+#define	SSP_CTRL0_IGNORE_CRC			(1 << 26)
+#define	SSP_CTRL0_READ				(1 << 25)
+#define	SSP_CTRL0_DATA_XFER			(1 << 24)
+#define	SSP_CTRL0_BUS_WIDTH_MASK		(0x3 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_OFFSET		22
+#define	SSP_CTRL0_BUS_WIDTH_ONE_BIT		(0x0 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_FOUR_BIT		(0x1 << 22)
+#define	SSP_CTRL0_BUS_WIDTH_EIGHT_BIT		(0x2 << 22)
+#define	SSP_CTRL0_WAIT_FOR_IRQ			(1 << 21)
+#define	SSP_CTRL0_WAIT_FOR_CMD			(1 << 20)
+#define	SSP_CTRL0_LONG_RESP			(1 << 19)
+#define	SSP_CTRL0_CHECK_RESP			(1 << 18)
+#define	SSP_CTRL0_GET_RESP			(1 << 17)
+#define	SSP_CTRL0_ENABLE			(1 << 16)
+
+#ifdef CONFIG_MX23
+#define	SSP_CTRL0_XFER_COUNT_OFFSET		0
+#define	SSP_CTRL0_XFER_COUNT_MASK		0xffff
+#endif
+
+#define	SSP_CMD0_SOFT_TERMINATE			(1 << 26)
+#define	SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
+#define	SSP_CMD0_PRIM_BOOT_OP_EN		(1 << 24)
+#define	SSP_CMD0_BOOT_ACK_EN			(1 << 23)
+#define	SSP_CMD0_SLOW_CLKING_EN			(1 << 22)
+#define	SSP_CMD0_CONT_CLKING_EN			(1 << 21)
+#define	SSP_CMD0_APPEND_8CYC			(1 << 20)
+#if defined(CONFIG_MX23)
+#define	SSP_CMD0_BLOCK_SIZE_MASK		(0xf << 16)
+#define	SSP_CMD0_BLOCK_SIZE_OFFSET		16
+#define	SSP_CMD0_BLOCK_COUNT_MASK		(0xff << 8)
+#define	SSP_CMD0_BLOCK_COUNT_OFFSET		8
+#endif
+#define	SSP_CMD0_CMD_MASK			0xff
+#define	SSP_CMD0_CMD_OFFSET			0
+#define	SSP_CMD0_CMD_MMC_GO_IDLE_STATE		0x00
+#define	SSP_CMD0_CMD_MMC_SEND_OP_COND		0x01
+#define	SSP_CMD0_CMD_MMC_ALL_SEND_CID		0x02
+#define	SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR	0x03
+#define	SSP_CMD0_CMD_MMC_SET_DSR		0x04
+#define	SSP_CMD0_CMD_MMC_RESERVED_5		0x05
+#define	SSP_CMD0_CMD_MMC_SWITCH			0x06
+#define	SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD	0x07
+#define	SSP_CMD0_CMD_MMC_SEND_EXT_CSD		0x08
+#define	SSP_CMD0_CMD_MMC_SEND_CSD		0x09
+#define	SSP_CMD0_CMD_MMC_SEND_CID		0x0a
+#define	SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP	0x0b
+#define	SSP_CMD0_CMD_MMC_STOP_TRANSMISSION	0x0c
+#define	SSP_CMD0_CMD_MMC_SEND_STATUS		0x0d
+#define	SSP_CMD0_CMD_MMC_BUSTEST_R		0x0e
+#define	SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE	0x0f
+#define	SSP_CMD0_CMD_MMC_SET_BLOCKLEN		0x10
+#define	SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK	0x11
+#define	SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK	0x12
+#define	SSP_CMD0_CMD_MMC_BUSTEST_W		0x13
+#define	SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP	0x14
+#define	SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT	0x17
+#define	SSP_CMD0_CMD_MMC_WRITE_BLOCK		0x18
+#define	SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK	0x19
+#define	SSP_CMD0_CMD_MMC_PROGRAM_CID		0x1a
+#define	SSP_CMD0_CMD_MMC_PROGRAM_CSD		0x1b
+#define	SSP_CMD0_CMD_MMC_SET_WRITE_PROT		0x1c
+#define	SSP_CMD0_CMD_MMC_CLR_WRITE_PROT		0x1d
+#define	SSP_CMD0_CMD_MMC_SEND_WRITE_PROT	0x1e
+#define	SSP_CMD0_CMD_MMC_ERASE_GROUP_START	0x23
+#define	SSP_CMD0_CMD_MMC_ERASE_GROUP_END	0x24
+#define	SSP_CMD0_CMD_MMC_ERASE			0x26
+#define	SSP_CMD0_CMD_MMC_FAST_IO		0x27
+#define	SSP_CMD0_CMD_MMC_GO_IRQ_STATE		0x28
+#define	SSP_CMD0_CMD_MMC_LOCK_UNLOCK		0x2a
+#define	SSP_CMD0_CMD_MMC_APP_CMD		0x37
+#define	SSP_CMD0_CMD_MMC_GEN_CMD		0x38
+#define	SSP_CMD0_CMD_SD_GO_IDLE_STATE		0x00
+#define	SSP_CMD0_CMD_SD_ALL_SEND_CID		0x02
+#define	SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR	0x03
+#define	SSP_CMD0_CMD_SD_SET_DSR			0x04
+#define	SSP_CMD0_CMD_SD_IO_SEND_OP_COND		0x05
+#define	SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD	0x07
+#define	SSP_CMD0_CMD_SD_SEND_CSD		0x09
+#define	SSP_CMD0_CMD_SD_SEND_CID		0x0a
+#define	SSP_CMD0_CMD_SD_STOP_TRANSMISSION	0x0c
+#define	SSP_CMD0_CMD_SD_SEND_STATUS		0x0d
+#define	SSP_CMD0_CMD_SD_GO_INACTIVE_STATE	0x0f
+#define	SSP_CMD0_CMD_SD_SET_BLOCKLEN		0x10
+#define	SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK	0x11
+#define	SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK	0x12
+#define	SSP_CMD0_CMD_SD_WRITE_BLOCK		0x18
+#define	SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK	0x19
+#define	SSP_CMD0_CMD_SD_PROGRAM_CSD		0x1b
+#define	SSP_CMD0_CMD_SD_SET_WRITE_PROT		0x1c
+#define	SSP_CMD0_CMD_SD_CLR_WRITE_PROT		0x1d
+#define	SSP_CMD0_CMD_SD_SEND_WRITE_PROT		0x1e
+#define	SSP_CMD0_CMD_SD_ERASE_WR_BLK_START	0x20
+#define	SSP_CMD0_CMD_SD_ERASE_WR_BLK_END	0x21
+#define	SSP_CMD0_CMD_SD_ERASE_GROUP_START	0x23
+#define	SSP_CMD0_CMD_SD_ERASE_GROUP_END		0x24
+#define	SSP_CMD0_CMD_SD_ERASE			0x26
+#define	SSP_CMD0_CMD_SD_LOCK_UNLOCK		0x2a
+#define	SSP_CMD0_CMD_SD_IO_RW_DIRECT		0x34
+#define	SSP_CMD0_CMD_SD_IO_RW_EXTENDED		0x35
+#define	SSP_CMD0_CMD_SD_APP_CMD			0x37
+#define	SSP_CMD0_CMD_SD_GEN_CMD			0x38
+
+#define	SSP_CMD1_CMD_ARG_MASK			0xffffffff
+#define	SSP_CMD1_CMD_ARG_OFFSET			0
+
+#if defined(CONFIG_MX28)
+#define	SSP_XFER_SIZE_XFER_COUNT_MASK		0xffffffff
+#define	SSP_XFER_SIZE_XFER_COUNT_OFFSET		0
+
+#define	SSP_BLOCK_SIZE_BLOCK_COUNT_MASK		(0xffffff << 4)
+#define	SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET	4
+#define	SSP_BLOCK_SIZE_BLOCK_SIZE_MASK		0xf
+#define	SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET	0
+#endif
+
+#define	SSP_COMPREF_REFERENCE_MASK		0xffffffff
+#define	SSP_COMPREF_REFERENCE_OFFSET		0
+
+#define	SSP_COMPMASK_MASK_MASK			0xffffffff
+#define	SSP_COMPMASK_MASK_OFFSET		0
+
+#define	SSP_TIMING_TIMEOUT_MASK			(0xffff << 16)
+#define	SSP_TIMING_TIMEOUT_OFFSET		16
+#define	SSP_TIMING_CLOCK_DIVIDE_MASK		(0xff << 8)
+#define	SSP_TIMING_CLOCK_DIVIDE_OFFSET		8
+#define	SSP_TIMING_CLOCK_RATE_MASK		0xff
+#define	SSP_TIMING_CLOCK_RATE_OFFSET		0
+
+#define	SSP_CTRL1_SDIO_IRQ			(1 << 31)
+#define	SSP_CTRL1_SDIO_IRQ_EN			(1 << 30)
+#define	SSP_CTRL1_RESP_ERR_IRQ			(1 << 29)
+#define	SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
+#define	SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
+#define	SSP_CTRL1_RESP_TIMEOUT_IRQ_EN		(1 << 26)
+#define	SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
+#define	SSP_CTRL1_DATA_TIMEOUT_IRQ_EN		(1 << 24)
+#define	SSP_CTRL1_DATA_CRC_IRQ			(1 << 23)
+#define	SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
+#define	SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
+#define	SSP_CTRL1_FIFO_UNDERRUN_EN		(1 << 20)
+#define	SSP_CTRL1_CEATA_CCS_ERR_IRQ		(1 << 19)
+#define	SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN		(1 << 18)
+#define	SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
+#define	SSP_CTRL1_RECV_TIMEOUT_IRQ_EN		(1 << 16)
+#define	SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
+#define	SSP_CTRL1_FIFO_OVERRUN_IRQ_EN		(1 << 14)
+#define	SSP_CTRL1_DMA_ENABLE			(1 << 13)
+#define	SSP_CTRL1_CEATA_CCS_ERR_EN		(1 << 12)
+#define	SSP_CTRL1_SLAVE_OUT_DISABLE		(1 << 11)
+#define	SSP_CTRL1_PHASE				(1 << 10)
+#define	SSP_CTRL1_POLARITY			(1 << 9)
+#define	SSP_CTRL1_SLAVE_MODE			(1 << 8)
+#define	SSP_CTRL1_WORD_LENGTH_MASK		(0xf << 4)
+#define	SSP_CTRL1_WORD_LENGTH_OFFSET		4
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED0		(0x0 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED1		(0x1 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_RESERVED2		(0x2 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_FOUR_BITS		(0x3 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_EIGHT_BITS	(0x7 << 4)
+#define	SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS	(0xf << 4)
+#define	SSP_CTRL1_SSP_MODE_MASK			0xf
+#define	SSP_CTRL1_SSP_MODE_OFFSET		0
+#define	SSP_CTRL1_SSP_MODE_SPI			0x0
+#define	SSP_CTRL1_SSP_MODE_SSI			0x1
+#define	SSP_CTRL1_SSP_MODE_SD_MMC		0x3
+#define	SSP_CTRL1_SSP_MODE_MS			0x4
+
+#define	SSP_DATA_DATA_MASK			0xffffffff
+#define	SSP_DATA_DATA_OFFSET			0
+
+#define	SSP_SDRESP0_RESP0_MASK			0xffffffff
+#define	SSP_SDRESP0_RESP0_OFFSET		0
+
+#define	SSP_SDRESP1_RESP1_MASK			0xffffffff
+#define	SSP_SDRESP1_RESP1_OFFSET		0
+
+#define	SSP_SDRESP2_RESP2_MASK			0xffffffff
+#define	SSP_SDRESP2_RESP2_OFFSET		0
+
+#define	SSP_SDRESP3_RESP3_MASK			0xffffffff
+#define	SSP_SDRESP3_RESP3_OFFSET		0
+
+#define	SSP_DDR_CTRL_DMA_BURST_TYPE_MASK	(0x3 << 30)
+#define	SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET	30
+#define	SSP_DDR_CTRL_NIBBLE_POS			(1 << 1)
+#define	SSP_DDR_CTRL_TXCLK_DELAY_TYPE		(1 << 0)
+
+#define	SSP_DLL_CTRL_REF_UPDATE_INT_MASK	(0xf << 28)
+#define	SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET	28
+#define	SSP_DLL_CTRL_SLV_UPDATE_INT_MASK	(0xff << 20)
+#define	SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET	20
+#define	SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK	(0x3f << 10)
+#define	SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET	10
+#define	SSP_DLL_CTRL_SLV_OVERRIDE		(1 << 9)
+#define	SSP_DLL_CTRL_GATE_UPDATE		(1 << 7)
+#define	SSP_DLL_CTRL_SLV_DLY_TARGET_MASK	(0xf << 3)
+#define	SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET	3
+#define	SSP_DLL_CTRL_SLV_FORCE_UPD		(1 << 2)
+#define	SSP_DLL_CTRL_RESET			(1 << 1)
+#define	SSP_DLL_CTRL_ENABLE			(1 << 0)
+
+#define	SSP_STATUS_PRESENT			(1 << 31)
+#define	SSP_STATUS_MS_PRESENT			(1 << 30)
+#define	SSP_STATUS_SD_PRESENT			(1 << 29)
+#define	SSP_STATUS_CARD_DETECT			(1 << 28)
+#define	SSP_STATUS_DMABURST			(1 << 22)
+#define	SSP_STATUS_DMASENSE			(1 << 21)
+#define	SSP_STATUS_DMATERM			(1 << 20)
+#define	SSP_STATUS_DMAREQ			(1 << 19)
+#define	SSP_STATUS_DMAEND			(1 << 18)
+#define	SSP_STATUS_SDIO_IRQ			(1 << 17)
+#define	SSP_STATUS_RESP_CRC_ERR			(1 << 16)
+#define	SSP_STATUS_RESP_ERR			(1 << 15)
+#define	SSP_STATUS_RESP_TIMEOUT			(1 << 14)
+#define	SSP_STATUS_DATA_CRC_ERR			(1 << 13)
+#define	SSP_STATUS_TIMEOUT			(1 << 12)
+#define	SSP_STATUS_RECV_TIMEOUT_STAT		(1 << 11)
+#define	SSP_STATUS_CEATA_CCS_ERR		(1 << 10)
+#define	SSP_STATUS_FIFO_OVRFLW			(1 << 9)
+#define	SSP_STATUS_FIFO_FULL			(1 << 8)
+#define	SSP_STATUS_FIFO_EMPTY			(1 << 5)
+#define	SSP_STATUS_FIFO_UNDRFLW			(1 << 4)
+#define	SSP_STATUS_CMD_BUSY			(1 << 3)
+#define	SSP_STATUS_DATA_BUSY			(1 << 2)
+#define	SSP_STATUS_BUSY				(1 << 0)
+
+#define	SSP_DLL_STS_REF_SEL_MASK		(0x3f << 8)
+#define	SSP_DLL_STS_REF_SEL_OFFSET		8
+#define	SSP_DLL_STS_SLV_SEL_MASK		(0x3f << 2)
+#define	SSP_DLL_STS_SLV_SEL_OFFSET		2
+#define	SSP_DLL_STS_REF_LOCK			(1 << 1)
+#define	SSP_DLL_STS_SLV_LOCK			(1 << 0)
+
+#define	SSP_DEBUG_DATACRC_ERR_MASK		(0xf << 28)
+#define	SSP_DEBUG_DATACRC_ERR_OFFSET		28
+#define	SSP_DEBUG_DATA_STALL			(1 << 27)
+#define	SSP_DEBUG_DAT_SM_MASK			(0x7 << 24)
+#define	SSP_DEBUG_DAT_SM_OFFSET			24
+#define	SSP_DEBUG_DAT_SM_DSM_IDLE		(0x0 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_WORD		(0x2 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_CRC1		(0x3 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_CRC2		(0x4 << 24)
+#define	SSP_DEBUG_DAT_SM_DSM_END		(0x5 << 24)
+#define	SSP_DEBUG_MSTK_SM_MASK			(0xf << 20)
+#define	SSP_DEBUG_MSTK_SM_OFFSET		20
+#define	SSP_DEBUG_MSTK_SM_MSTK_IDLE		(0x0 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CKON		(0x1 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS1		(0x2 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_TPC		(0x3 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS2		(0x4 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_HDSHK		(0x5 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS3		(0x6 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_RW		(0x7 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CRC1		(0x8 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_CRC2		(0x9 << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_BS0		(0xa << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END1		(0xb << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END2W		(0xc << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_END2R		(0xd << 20)
+#define	SSP_DEBUG_MSTK_SM_MSTK_DONE		(0xe << 20)
+#define	SSP_DEBUG_CMD_OE			(1 << 19)
+#define	SSP_DEBUG_DMA_SM_MASK			(0x7 << 16)
+#define	SSP_DEBUG_DMA_SM_OFFSET			16
+#define	SSP_DEBUG_DMA_SM_DMA_IDLE		(0x0 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DMAREQ		(0x1 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DMAACK		(0x2 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_STALL		(0x3 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_BUSY		(0x4 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_DONE		(0x5 << 16)
+#define	SSP_DEBUG_DMA_SM_DMA_COUNT		(0x6 << 16)
+#define	SSP_DEBUG_MMC_SM_MASK			(0xf << 12)
+#define	SSP_DEBUG_MMC_SM_OFFSET			12
+#define	SSP_DEBUG_MMC_SM_MMC_IDLE		(0x0 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CMD		(0x1 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_TRC		(0x2 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RESP		(0x3 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RPRX		(0x4 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_TX			(0x5 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CTOK		(0x6 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_RX			(0x7 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_CCS		(0x8 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_PUP		(0x9 << 12)
+#define	SSP_DEBUG_MMC_SM_MMC_WAIT		(0xa << 12)
+#define	SSP_DEBUG_CMD_SM_MASK			(0x3 << 10)
+#define	SSP_DEBUG_CMD_SM_OFFSET			10
+#define	SSP_DEBUG_CMD_SM_CSM_IDLE		(0x0 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_INDEX		(0x1 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_ARG		(0x2 << 10)
+#define	SSP_DEBUG_CMD_SM_CSM_CRC		(0x3 << 10)
+#define	SSP_DEBUG_SSP_CMD			(1 << 9)
+#define	SSP_DEBUG_SSP_RESP			(1 << 8)
+#define	SSP_DEBUG_SSP_RXD_MASK			0xff
+#define	SSP_DEBUG_SSP_RXD_OFFSET		0
+
+#define	SSP_VERSION_MAJOR_MASK			(0xff << 24)
+#define	SSP_VERSION_MAJOR_OFFSET		24
+#define	SSP_VERSION_MINOR_MASK			(0xff << 16)
+#define	SSP_VERSION_MINOR_OFFSET		16
+#define	SSP_VERSION_STEP_MASK			0xffff
+#define	SSP_VERSION_STEP_OFFSET			0
+
+#endif /* __MX28_REGS_SSP_H__ */

bjos/imx233/arch/regs-timrot.h

@@ -0,0 +1,259 @@
+/*
+ * Freescale i.MX28 TIMROT Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_TIMROT_H__
+#define __MX28_REGS_TIMROT_H__
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mxs_timrot_regs {
+	mxs_reg_32(hw_timrot_rotctrl)
+	mxs_reg_32(hw_timrot_rotcount)
+#if defined(CONFIG_MX23)
+	mxs_reg_32(hw_timrot_timctrl0)
+	mxs_reg_32(hw_timrot_timcount0)
+	mxs_reg_32(hw_timrot_timctrl1)
+	mxs_reg_32(hw_timrot_timcount1)
+	mxs_reg_32(hw_timrot_timctrl2)
+	mxs_reg_32(hw_timrot_timcount2)
+	mxs_reg_32(hw_timrot_timctrl3)
+	mxs_reg_32(hw_timrot_timcount3)
+#elif defined(CONFIG_MX28)
+	mxs_reg_32(hw_timrot_timctrl0)
+	mxs_reg_32(hw_timrot_running_count0)
+	mxs_reg_32(hw_timrot_fixed_count0)
+	mxs_reg_32(hw_timrot_match_count0)
+	mxs_reg_32(hw_timrot_timctrl1)
+	mxs_reg_32(hw_timrot_running_count1)
+	mxs_reg_32(hw_timrot_fixed_count1)
+	mxs_reg_32(hw_timrot_match_count1)
+	mxs_reg_32(hw_timrot_timctrl2)
+	mxs_reg_32(hw_timrot_running_count2)
+	mxs_reg_32(hw_timrot_fixed_count2)
+	mxs_reg_32(hw_timrot_match_count2)
+	mxs_reg_32(hw_timrot_timctrl3)
+	mxs_reg_32(hw_timrot_running_count3)
+	mxs_reg_32(hw_timrot_fixed_count3)
+	mxs_reg_32(hw_timrot_match_count3)
+#endif
+	mxs_reg_32(hw_timrot_version)
+};
+#endif
+
+#define	TIMROT_ROTCTRL_SFTRST				(1 << 31)
+#define	TIMROT_ROTCTRL_CLKGATE				(1 << 30)
+#define	TIMROT_ROTCTRL_ROTARY_PRESENT			(1 << 29)
+#define	TIMROT_ROTCTRL_TIM3_PRESENT			(1 << 28)
+#define	TIMROT_ROTCTRL_TIM2_PRESENT			(1 << 27)
+#define	TIMROT_ROTCTRL_TIM1_PRESENT			(1 << 26)
+#define	TIMROT_ROTCTRL_TIM0_PRESENT			(1 << 25)
+#define	TIMROT_ROTCTRL_STATE_MASK			(0x7 << 22)
+#define	TIMROT_ROTCTRL_STATE_OFFSET			22
+#define	TIMROT_ROTCTRL_DIVIDER_MASK			(0x3f << 16)
+#define	TIMROT_ROTCTRL_DIVIDER_OFFSET			16
+#define	TIMROT_ROTCTRL_RELATIVE				(1 << 12)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_MASK			(0x3 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_OFFSET		10
+#define	TIMROT_ROTCTRL_OVERSAMPLE_8X			(0x0 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_4X			(0x1 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_2X			(0x2 << 10)
+#define	TIMROT_ROTCTRL_OVERSAMPLE_1X			(0x3 << 10)
+#define	TIMROT_ROTCTRL_POLARITY_B			(1 << 9)
+#define	TIMROT_ROTCTRL_POLARITY_A			(1 << 8)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_MASK			(0x7 << 4)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_B_MASK			(0xf << 4)
+#endif
+#define	TIMROT_ROTCTRL_SELECT_B_OFFSET			4
+#define	TIMROT_ROTCTRL_SELECT_B_NEVER_TICK		(0x0 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM0			(0x1 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM1			(0x2 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM2			(0x3 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM3			(0x4 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM4			(0x5 << 4)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYA		(0x6 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYB		(0x7 << 4)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM5			(0x6 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM6			(0x7 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_PWM7			(0x8 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYA			(0x9 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYB			(0xa << 4)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_MASK			0x7
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_A_MASK			0xf
+#endif
+#define	TIMROT_ROTCTRL_SELECT_A_OFFSET			0
+#define	TIMROT_ROTCTRL_SELECT_A_NEVER_TICK		0x0
+#define	TIMROT_ROTCTRL_SELECT_A_PWM0			0x1
+#define	TIMROT_ROTCTRL_SELECT_A_PWM1			0x2
+#define	TIMROT_ROTCTRL_SELECT_A_PWM2			0x3
+#define	TIMROT_ROTCTRL_SELECT_A_PWM3			0x4
+#define	TIMROT_ROTCTRL_SELECT_A_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYA		0x6
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYB		0x7
+#elif defined(CONFIG_MX28)
+#define	TIMROT_ROTCTRL_SELECT_A_PWM5			0x6
+#define	TIMROT_ROTCTRL_SELECT_A_PWM6			0x7
+#define	TIMROT_ROTCTRL_SELECT_A_PWM7			0x8
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYA			0x9
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYB			0xa
+#endif
+
+#define	TIMROT_ROTCOUNT_UPDOWN_MASK			0xffff
+#define	TIMROT_ROTCOUNT_UPDOWN_OFFSET			0
+
+#define	TIMROT_TIMCTRLn_IRQ				(1 << 15)
+#define	TIMROT_TIMCTRLn_IRQ_EN				(1 << 14)
+#if defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRLn_MATCH_MODE			(1 << 11)
+#endif
+#define	TIMROT_TIMCTRLn_POLARITY			(1 << 8)
+#define	TIMROT_TIMCTRLn_UPDATE				(1 << 7)
+#define	TIMROT_TIMCTRLn_RELOAD				(1 << 6)
+#define	TIMROT_TIMCTRLn_PRESCALE_MASK			(0x3 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_OFFSET			4
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1		(0x0 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2		(0x1 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4		(0x2 << 4)
+#define	TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8		(0x3 << 4)
+#define	TIMROT_TIMCTRLn_SELECT_MASK			0xf
+#define	TIMROT_TIMCTRLn_SELECT_OFFSET			0
+#define	TIMROT_TIMCTRLn_SELECT_NEVER_TICK		0x0
+#define	TIMROT_TIMCTRLn_SELECT_PWM0			0x1
+#define	TIMROT_TIMCTRLn_SELECT_PWM1			0x2
+#define	TIMROT_TIMCTRLn_SELECT_PWM2			0x3
+#define	TIMROT_TIMCTRLn_SELECT_PWM3			0x4
+#define	TIMROT_TIMCTRLn_SELECT_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xc
+#elif defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRLn_SELECT_PWM5			0x6
+#define	TIMROT_TIMCTRLn_SELECT_PWM6			0x7
+#define	TIMROT_TIMCTRLn_SELECT_PWM7			0x8
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYA			0x9
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYB			0xa
+#define	TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL		0xc
+#define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xd
+#define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xe
+#define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xf
+#endif
+
+#if defined(CONFIG_MX23)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	16
+#elif defined(CONFIG_MX28)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	0xffffffff
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	0
+#endif
+
+#if defined(CONFIG_MX23)
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffff
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#elif defined(CONFIG_MX28)
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffffffff
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#endif
+
+#if defined(CONFIG_MX28)
+#define	TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK		0xffffffff
+#define	TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET		0
+#endif
+
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_MASK		(0xf << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET		16
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK		(0x0 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0		(0x1 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1		(0x2 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2		(0x3 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3		(0x4 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4		(0x5 << 16)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA		(0x6 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB		(0x7 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL		(0x8 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL		(0x9 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xa << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xb << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xc << 16)
+#elif defined(CONFIG_MX28)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5		(0x6 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6		(0x7 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7		(0x8 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA		(0x9 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB		(0xa << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL		(0xb << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL		(0xc << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xd << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xe << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xf << 16)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_IRQ				(1 << 15)
+#define	TIMROT_TIMCTRL3_IRQ_EN				(1 << 14)
+#define	TIMROT_TIMCTRL3_DUTU_VALID			(1 << 10)
+#endif
+#define	TIMROT_TIMCTRL3_DUTY_CYCLE			(1 << 9)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_POLARITY_MASK			(0x1 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_OFFSET		8
+#define	TIMROT_TIMCTRL3_POLARITY_POSITIVE		(0x0 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_NEGATIVE		(0x1 << 8)
+#define	TIMROT_TIMCTRL3_UPDATE				(1 << 7)
+#define	TIMROT_TIMCTRL3_RELOAD				(1 << 6)
+#define	TIMROT_TIMCTRL3_PRESCALE_MASK			(0x3 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_OFFSET		4
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1		(0x0 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2		(0x1 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4		(0x2 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8		(0x3 << 4)
+#define	TIMROT_TIMCTRL3_SELECT_MASK			0xf
+#define	TIMROT_TIMCTRL3_SELECT_OFFSET			0
+#define	TIMROT_TIMCTRL3_SELECT_NEVER_TICK		0x0
+#define	TIMROT_TIMCTRL3_SELECT_PWM0			0x1
+#define	TIMROT_TIMCTRL3_SELECT_PWM1			0x2
+#define	TIMROT_TIMCTRL3_SELECT_PWM2			0x3
+#define	TIMROT_TIMCTRL3_SELECT_PWM3			0x4
+#define	TIMROT_TIMCTRL3_SELECT_PWM4			0x5
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS		0xc
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET	16
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK	0xffff
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET	0
+#endif
+
+#define	TIMROT_VERSION_MAJOR_MASK			(0xff << 24)
+#define	TIMROT_VERSION_MAJOR_OFFSET			24
+#define	TIMROT_VERSION_MINOR_MASK			(0xff << 16)
+#define	TIMROT_VERSION_MINOR_OFFSET			16
+#define	TIMROT_VERSION_STEP_MASK			0xffff
+#define	TIMROT_VERSION_STEP_OFFSET			0
+
+#endif /* __MX28_REGS_TIMROT_H__ */

bjos/imx233/arch/regs-uartapp.h

@@ -0,0 +1,220 @@
+/*
+ * Freescale MXS UARTAPP Register Definitions
+ *
+ * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ARCH_ARM___MXS_UARTAPP_H
+#define __ARCH_ARM___MXS_UARTAPP_H
+
+#include <asm/imx-common/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_uartapp_regs {
+	mxs_reg_32(hw_uartapp_ctrl0)
+	mxs_reg_32(hw_uartapp_ctrl1)
+	mxs_reg_32(hw_uartapp_ctrl2)
+	mxs_reg_32(hw_uartapp_linectrl)
+	mxs_reg_32(hw_uartapp_linectrl2)
+	mxs_reg_32(hw_uartapp_intr)
+	mxs_reg_32(hw_uartapp_data)
+	mxs_reg_32(hw_uartapp_stat)
+	mxs_reg_32(hw_uartapp_debug)
+	mxs_reg_32(hw_uartapp_version)
+	mxs_reg_32(hw_uartapp_autobaud)
+};
+#endif
+
+#define UARTAPP_CTRL0_SFTRST_MASK				(1 << 31)
+#define UARTAPP_CTRL0_CLKGATE_MASK			(1 << 30)
+#define UARTAPP_CTRL0_RUN_MASK				(1 << 29)
+#define UARTAPP_CTRL0_RX_SOURCE_MASK			(1 << 28)
+#define UARTAPP_CTRL0_RXTO_ENABLE_MASK			(1 << 27)
+#define UARTAPP_CTRL0_RXTIMEOUT_OFFSET			16
+#define UARTAPP_CTRL0_RXTIMEOUT_MASK			(0x7FF << 16)
+#define UARTAPP_CTRL0_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL0_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL1_RUN_MASK				(1 << 28)
+
+#define UARTAPP_CTRL1_XFER_COUNT_OFFSET			0
+#define UARTAPP_CTRL1_XFER_COUNT_MASK			0xFFFF
+
+#define UARTAPP_CTRL2_INVERT_RTS_MASK			(1 << 31)
+#define UARTAPP_CTRL2_INVERT_CTS_MASK			(1 << 30)
+#define UARTAPP_CTRL2_INVERT_TX_MASK			(1 << 29)
+#define UARTAPP_CTRL2_INVERT_RX_MASK			(1 << 28)
+#define UARTAPP_CTRL2_RTS_SEMAPHORE_MASK			(1 << 27)
+#define UARTAPP_CTRL2_DMAONERR_MASK			(1 << 26)
+#define UARTAPP_CTRL2_TXDMAE_MASK				(1 << 25)
+#define UARTAPP_CTRL2_RXDMAE_MASK				(1 << 24)
+#define UARTAPP_CTRL2_RXIFLSEL_OFFSET			20
+#define UARTAPP_CTRL2_RXIFLSEL_MASK			(0x7 << 20)
+
+#define UARTAPP_CTRL2_RXIFLSEL_NOT_EMPTY		(0x0 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_QUARTER		(0x1 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_ONE_HALF		(0x2 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_THREE_QUARTERS		(0x3 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_SEVEN_EIGHTHS		(0x4 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID5		(0x5 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID6		(0x6 << 20)
+#define UARTAPP_CTRL2_RXIFLSEL_INVALID7		(0x7 << 20)
+#define UARTAPP_CTRL2_TXIFLSEL_OFFSET			16
+#define UARTAPP_CTRL2_TXIFLSEL_MASK			(0x7 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_EMPTY			(0x0 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_QUARTER		(0x1 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_ONE_HALF		(0x2 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_THREE_QUARTERS		(0x3 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_SEVEN_EIGHTHS		(0x4 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID5		(0x5 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID6		(0x6 << 16)
+#define UARTAPP_CTRL2_TXIFLSEL_INVALID7		(0x7 << 16)
+#define UARTAPP_CTRL2_CTSEN_MASK				(1 << 15)
+#define UARTAPP_CTRL2_RTSEN_MASK				(1 << 14)
+#define UARTAPP_CTRL2_OUT2_MASK				(1 << 13)
+#define UARTAPP_CTRL2_OUT1_MASK				(1 << 12)
+#define UARTAPP_CTRL2_RTS_MASK				(1 << 11)
+#define UARTAPP_CTRL2_DTR_MASK				(1 << 10)
+#define UARTAPP_CTRL2_RXE_MASK				(1 << 9)
+#define UARTAPP_CTRL2_TXE_MASK				(1 << 8)
+#define UARTAPP_CTRL2_LBE_MASK				(1 << 7)
+#define UARTAPP_CTRL2_USE_LCR2_MASK			(1 << 6)
+
+#define UARTAPP_CTRL2_SIRLP_MASK				(1 << 2)
+#define UARTAPP_CTRL2_SIREN_MASK				(1 << 1)
+#define UARTAPP_CTRL2_UARTEN_MASK				0x01
+
+#define UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET			16
+#define UARTAPP_LINECTRL_BAUD_DIVINT_MASK			(0xFFFF << 16)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET		6
+
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL_SPS_MASK				(1 << 7)
+#define UARTAPP_LINECTRL_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL_FEN_MASK				(1 << 4)
+#define UARTAPP_LINECTRL_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL_EPS_MASK				(1 << 2)
+#define UARTAPP_LINECTRL_PEN_MASK				(1 << 1)
+#define UARTAPP_LINECTRL_BRK_MASK				1
+
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_OFFSET		16
+#define UARTAPP_LINECTRL2_BAUD_DIVINT_MASK		(0xFFFF << 16)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVINT_OFFSET	6
+
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_OFFSET		8
+#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_MASK		(0x3F << 8)
+#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVFRAC_MASK	0x3F
+
+#define UARTAPP_LINECTRL2_SPS_MASK			(1 << 7)
+#define UARTAPP_LINECTRL2_WLEN_OFFSET			5
+#define UARTAPP_LINECTRL2_WLEN_MASK			(0x03 << 5)
+#define UARTAPP_LINECTRL2_WLEN_5BITS			(0x00 << 5)
+#define UARTAPP_LINECTRL2_WLEN_6BITS			(0x01 << 5)
+#define UARTAPP_LINECTRL2_WLEN_7BITS			(0x02 << 5)
+#define UARTAPP_LINECTRL2_WLEN_8BITS			(0x03 << 5)
+
+#define UARTAPP_LINECTRL2_FEN_MASK			(1 << 4)
+#define UARTAPP_LINECTRL2_STP2_MASK			(1 << 3)
+#define UARTAPP_LINECTRL2_EPS_MASK			(1 << 2)
+#define UARTAPP_LINECTRL2_PEN_MASK			(1 << 1)
+
+#define UARTAPP_INTR_ABDIEN_MASK				(1 << 27)
+#define UARTAPP_INTR_OEIEN_MASK				(1 << 26)
+#define UARTAPP_INTR_BEIEN_MASK				(1 << 25)
+#define UARTAPP_INTR_PEIEN_MASK				(1 << 24)
+#define UARTAPP_INTR_FEIEN_MASK				(1 << 23)
+#define UARTAPP_INTR_RTIEN_MASK				(1 << 22)
+#define UARTAPP_INTR_TXIEN_MASK				(1 << 21)
+#define UARTAPP_INTR_RXIEN_MASK				(1 << 20)
+#define UARTAPP_INTR_DSRMIEN_MASK				(1 << 19)
+#define UARTAPP_INTR_DCDMIEN_MASK				(1 << 18)
+#define UARTAPP_INTR_CTSMIEN_MASK				(1 << 17)
+#define UARTAPP_INTR_RIMIEN_MASK				(1 << 16)
+
+#define UARTAPP_INTR_ABDIS_MASK				(1 << 11)
+#define UARTAPP_INTR_OEIS_MASK				(1 << 10)
+#define UARTAPP_INTR_BEIS_MASK				(1 << 9)
+#define UARTAPP_INTR_PEIS_MASK				(1 << 8)
+#define UARTAPP_INTR_FEIS_MASK				(1 << 7)
+#define UARTAPP_INTR_RTIS_MASK				(1 << 6)
+#define UARTAPP_INTR_TXIS_MASK				(1 << 5)
+#define UARTAPP_INTR_RXIS_MASK				(1 << 4)
+#define UARTAPP_INTR_DSRMIS_MASK				(1 << 3)
+#define UARTAPP_INTR_DCDMIS_MASK				(1 << 2)
+#define UARTAPP_INTR_CTSMIS_MASK				(1 << 1)
+#define UARTAPP_INTR_RIMIS_MASK				0x1
+
+#define UARTAPP_DATA_DATA_OFFSET				0
+#define UARTAPP_DATA_DATA_MASK				0xFFFFFFFF
+#define UARTAPP_STAT_PRESENT_MASK				(1 << 31)
+#define UARTAPP_STAT_PRESENT_UNAVAILABLE		(0x0 << 31)
+#define UARTAPP_STAT_PRESENT_AVAILABLE			(0x1 << 31)
+
+#define UARTAPP_STAT_HISPEED_MASK				(1 << 30)
+#define UARTAPP_STAT_HISPEED_UNAVAILABLE		(0x0 << 30)
+#define UARTAPP_STAT_HISPEED_AVAILABLE			(0x1 << 30)
+
+#define UARTAPP_STAT_BUSY_MASK				(1 << 29)
+#define UARTAPP_STAT_CTS_MASK				(1 << 28)
+#define UARTAPP_STAT_TXFE_MASK				(1 << 27)
+#define UARTAPP_STAT_RXFF_MASK				(1 << 26)
+#define UARTAPP_STAT_TXFF_MASK				(1 << 25)
+#define UARTAPP_STAT_RXFE_MASK				(1 << 24)
+#define UARTAPP_STAT_RXBYTE_INVALID_OFFSET			20
+#define UARTAPP_STAT_RXBYTE_INVALID_MASK		(0xF << 20)
+
+#define UARTAPP_STAT_OERR_MASK				(1 << 19)
+#define UARTAPP_STAT_BERR_MASK				(1 << 18)
+#define UARTAPP_STAT_PERR_MASK				(1 << 17)
+#define UARTAPP_STAT_FERR_MASK				(1 << 16)
+#define UARTAPP_STAT_RXCOUNT_OFFSET				0
+#define UARTAPP_STAT_RXCOUNT_MASK				0xFFFF
+
+#define UARTAPP_DEBUG_RXIBAUD_DIV_OFFSET			16
+#define UARTAPP_DEBUG_RXIBAUD_DIV_MASK				(0xFFFF << 16)
+
+#define UARTAPP_DEBUG_RXFBAUD_DIV_OFFSET			10
+#define UARTAPP_DEBUG_RXFBAUD_DIV_MASK				(0x3F << 10)
+
+#define UARTAPP_DEBUG_TXDMARUN_MASK			(1 << 5)
+#define UARTAPP_DEBUG_RXDMARUN_MASK			(1 << 4)
+#define UARTAPP_DEBUG_TXCMDEND_MASK			(1 << 3)
+#define UARTAPP_DEBUG_RXCMDEND_MASK			(1 << 2)
+#define UARTAPP_DEBUG_TXDMARQ_MASK			(1 << 1)
+#define UARTAPP_DEBUG_RXDMARQ_MASK			0x01
+
+#define UARTAPP_VERSION_MAJOR_OFFSET			24
+#define UARTAPP_VERSION_MAJOR_MASK			(0xFF << 24)
+
+#define UARTAPP_VERSION_MINOR_OFFSET			16
+#define UARTAPP_VERSION_MINOR_MASK			(0xFF << 16)
+
+#define UARTAPP_VERSION_STEP_OFFSET				0
+#define UARTAPP_VERSION_STEP_MASK				0xFFFF
+
+#define UARTAPP_AUTOBAUD_REFCHAR1_OFFSET			24
+#define UARTAPP_AUTOBAUD_REFCHAR1_MASK				(0xFF << 24)
+
+#define UARTAPP_AUTOBAUD_REFCHAR0_OFFSET			16
+#define UARTAPP_AUTOBAUD_REFCHAR0_MASK				(0xFF << 16)
+
+#define UARTAPP_AUTOBAUD_UPDATE_TX_MASK			(1 << 4)
+#define UARTAPP_AUTOBAUD_TWO_REF_CHARS_MASK		(1 << 3)
+#define UARTAPP_AUTOBAUD_START_WITH_RUNBIT_MASK		(1 << 2)
+#define UARTAPP_AUTOBAUD_START_BAUD_DETECT_MASK		(1 << 1)
+#define UARTAPP_AUTOBAUD_BAUD_DETECT_ENABLE_MASK		0x01
+#endif /* __ARCH_ARM___UARTAPP_H */

bjos/imx233/arch/regs-usb.h

@@ -0,0 +1,165 @@
+/*
+ * Freescale i.MX28 USB OTG Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __REGS_USB_H__
+#define __REGS_USB_H__
+
+struct mxs_usb_regs {
+	uint32_t		hw_usbctrl_id;			/* 0x000 */
+	uint32_t		hw_usbctrl_hwgeneral;		/* 0x004 */
+	uint32_t		hw_usbctrl_hwhost;		/* 0x008 */
+	uint32_t		hw_usbctrl_hwdevice;		/* 0x00c */
+	uint32_t		hw_usbctrl_hwtxbuf;		/* 0x010 */
+	uint32_t		hw_usbctrl_hwrxbuf;		/* 0x014 */
+
+	uint32_t		reserved1[26];
+
+	uint32_t		hw_usbctrl_gptimer0ld;		/* 0x080 */
+	uint32_t		hw_usbctrl_gptimer0ctrl;	/* 0x084 */
+	uint32_t		hw_usbctrl_gptimer1ld;		/* 0x088 */
+	uint32_t		hw_usbctrl_gptimer1ctrl;	/* 0x08c */
+	uint32_t		hw_usbctrl_sbuscfg;		/* 0x090 */
+
+	uint32_t		reserved2[27];
+
+	uint32_t		hw_usbctrl_caplength;		/* 0x100 */
+	uint32_t		hw_usbctrl_hcsparams;		/* 0x104 */
+	uint32_t		hw_usbctrl_hccparams;		/* 0x108 */
+
+	uint32_t		reserved3[5];
+
+	uint32_t		hw_usbctrl_dciversion;		/* 0x120 */
+	uint32_t		hw_usbctrl_dccparams;		/* 0x124 */
+
+	uint32_t		reserved4[6];
+
+	uint32_t		hw_usbctrl_usbcmd;		/* 0x140 */
+	uint32_t		hw_usbctrl_usbsts;		/* 0x144 */
+	uint32_t		hw_usbctrl_usbintr;		/* 0x148 */
+	uint32_t		hw_usbctrl_frindex;		/* 0x14c */
+
+	uint32_t		reserved5;
+
+	union {
+		uint32_t	hw_usbctrl_periodiclistbase;	/* 0x154 */
+		uint32_t	hw_usbctrl_deviceaddr;		/* 0x154 */
+	};
+	union {
+		uint32_t	hw_usbctrl_asynclistaddr;	/* 0x158 */
+		uint32_t	hw_usbctrl_endpointlistaddr;	/* 0x158 */
+	};
+
+	uint32_t		hw_usbctrl_ttctrl;		/* 0x15c */
+	uint32_t		hw_usbctrl_burstsize;		/* 0x160 */
+	uint32_t		hw_usbctrl_txfilltuning;	/* 0x164 */
+
+	uint32_t		reserved6;
+
+	uint32_t		hw_usbctrl_ic_usb;		/* 0x16c */
+	uint32_t		hw_usbctrl_ulpi;		/* 0x170 */
+
+	uint32_t		reserved7;
+
+	uint32_t		hw_usbctrl_endptnak;		/* 0x178 */
+	uint32_t		hw_usbctrl_endptnaken;		/* 0x17c */
+
+	uint32_t		reserved8;
+
+	uint32_t		hw_usbctrl_portsc1;		/* 0x184 */
+
+	uint32_t		reserved9[7];
+
+	uint32_t		hw_usbctrl_otgsc;		/* 0x1a4 */
+	uint32_t		hw_usbctrl_usbmode;		/* 0x1a8 */
+	uint32_t		hw_usbctrl_endptsetupstat;	/* 0x1ac */
+	uint32_t		hw_usbctrl_endptprime;		/* 0x1b0 */
+	uint32_t		hw_usbctrl_endptflush;		/* 0x1b4 */
+	uint32_t		hw_usbctrl_endptstat;		/* 0x1b8 */
+	uint32_t		hw_usbctrl_endptcomplete;	/* 0x1bc */
+	uint32_t		hw_usbctrl_endptctrl0;		/* 0x1c0 */
+	uint32_t		hw_usbctrl_endptctrl1;		/* 0x1c4 */
+	uint32_t		hw_usbctrl_endptctrl2;		/* 0x1c8 */
+	uint32_t		hw_usbctrl_endptctrl3;		/* 0x1cc */
+	uint32_t		hw_usbctrl_endptctrl4;		/* 0x1d0 */
+	uint32_t		hw_usbctrl_endptctrl5;		/* 0x1d4 */
+	uint32_t		hw_usbctrl_endptctrl6;		/* 0x1d8 */
+	uint32_t		hw_usbctrl_endptctrl7;		/* 0x1dc */
+};
+
+#define	CLKCTRL_PLL0CTRL0_LFR_SEL_MASK		(0x3 << 28)
+
+#define	HW_USBCTRL_ID_CIVERSION_OFFSET		29
+#define	HW_USBCTRL_ID_CIVERSION_MASK		(0x7 << 29)
+#define	HW_USBCTRL_ID_VERSION_OFFSET		25
+#define	HW_USBCTRL_ID_VERSION_MASK		(0xf << 25)
+#define	HW_USBCTRL_ID_REVISION_OFFSET		21
+#define	HW_USBCTRL_ID_REVISION_MASK		(0xf << 21)
+#define	HW_USBCTRL_ID_TAG_OFFSET		16
+#define	HW_USBCTRL_ID_TAG_MASK			(0x1f << 16)
+#define	HW_USBCTRL_ID_NID_OFFSET		8
+#define	HW_USBCTRL_ID_NID_MASK			(0x3f << 8)
+#define	HW_USBCTRL_ID_ID_OFFSET			0
+#define	HW_USBCTRL_ID_ID_MASK			(0x3f << 0)
+
+#define	HW_USBCTRL_HWGENERAL_SM_OFFSET		9
+#define	HW_USBCTRL_HWGENERAL_SM_MASK		(0x3 << 9)
+#define	HW_USBCTRL_HWGENERAL_PHYM_OFFSET	6
+#define	HW_USBCTRL_HWGENERAL_PHYM_MASK		(0x7 << 6)
+#define	HW_USBCTRL_HWGENERAL_PHYW_OFFSET	4
+#define	HW_USBCTRL_HWGENERAL_PHYW_MASK		(0x3 << 4)
+#define	HW_USBCTRL_HWGENERAL_BWT		(1 << 3)
+#define	HW_USBCTRL_HWGENERAL_CLKC_OFFSET	1
+#define	HW_USBCTRL_HWGENERAL_CLKC_MASK		(0x3 << 1)
+#define	HW_USBCTRL_HWGENERAL_RT			(1 << 0)
+
+#define	HW_USBCTRL_HWHOST_TTPER_OFFSET		24
+#define	HW_USBCTRL_HWHOST_TTPER_MASK		(0xff << 24)
+#define	HW_USBCTRL_HWHOST_TTASY_OFFSET		16
+#define	HW_USBCTRL_HWHOST_TTASY_MASK		(0xff << 19)
+#define	HW_USBCTRL_HWHOST_NPORT_OFFSET		1
+#define	HW_USBCTRL_HWHOST_NPORT_MASK		(0x7 << 1)
+#define	HW_USBCTRL_HWHOST_HC			(1 << 0)
+
+#define	HW_USBCTRL_HWDEVICE_DEVEP_OFFSET	1
+#define	HW_USBCTRL_HWDEVICE_DEVEP_MASK		(0x1f << 1)
+#define	HW_USBCTRL_HWDEVICE_DC			(1 << 0)
+
+#define	HW_USBCTRL_HWTXBUF_TXLCR		(1 << 31)
+#define	HW_USBCTRL_HWTXBUF_TXCHANADD_OFFSET	16
+#define	HW_USBCTRL_HWTXBUF_TXCHANADD_MASK	(0xff << 16)
+#define	HW_USBCTRL_HWTXBUF_TXADD_OFFSET		8
+#define	HW_USBCTRL_HWTXBUF_TXADD_MASK		(0xff << 8)
+#define	HW_USBCTRL_HWTXBUF_TXBURST_OFFSET	0
+#define	HW_USBCTRL_HWTXBUF_TXBURST_MASK		0xff
+
+#define	HW_USBCTRL_HWRXBUF_RXADD_OFFSET		8
+#define	HW_USBCTRL_HWRXBUF_RXADD_MASK		(0xff << 8)
+#define	HW_USBCTRL_HWRXBUF_RXBURST_OFFSET	0
+#define	HW_USBCTRL_HWRXBUF_RXBURST_MASK		0xff
+
+#define	HW_USBCTRL_GPTIMERLD_GPTLD_OFFSET	0
+#define	HW_USBCTRL_GPTIMERLD_GPTLD_MASK		0xffffff
+
+#define	HW_USBCTRL_GPTIMERCTRL_GPTRUN		(1 << 31)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTRST		(1 << 30)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTMODE		(1 << 24)
+#define	HW_USBCTRL_GPTIMERCTRL_GPTCNT_OFFSET	0
+#define	HW_USBCTRL_GPTIMERCTRL_GPTCNT_MASK	0xffffff
+
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_OFFSET	0
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_MASK	0x7
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR	0x0
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR4	0x1
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR8	0x2
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR16	0x3
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR4	0x5
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR8	0x6
+#define	HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR16	0x7
+
+#endif	/* __REGS_USB_H__ */

bjos/imx233/arch/regs-usbphy.h

@@ -0,0 +1,138 @@
+/*
+ * Freescale i.MX28 USB PHY Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __REGS_USBPHY_H__
+#define __REGS_USBPHY_H__
+
+struct mxs_usbphy_regs {
+	mxs_reg_32(hw_usbphy_pwd)
+	mxs_reg_32(hw_usbphy_tx)
+	mxs_reg_32(hw_usbphy_rx)
+	mxs_reg_32(hw_usbphy_ctrl)
+	mxs_reg_32(hw_usbphy_status)
+	mxs_reg_32(hw_usbphy_debug)
+	mxs_reg_32(hw_usbphy_debug0_status)
+	mxs_reg_32(hw_usbphy_debug1)
+	mxs_reg_32(hw_usbphy_version)
+	mxs_reg_32(hw_usbphy_ip)
+};
+
+#define	USBPHY_PWD_RXPWDRX				(1 << 20)
+#define	USBPHY_PWD_RXPWDDIFF				(1 << 19)
+#define	USBPHY_PWD_RXPWD1PT1				(1 << 18)
+#define	USBPHY_PWD_RXPWDENV				(1 << 17)
+#define	USBPHY_PWD_TXPWDV2I				(1 << 12)
+#define	USBPHY_PWD_TXPWDIBIAS				(1 << 11)
+#define	USBPHY_PWD_TXPWDFS				(1 << 10)
+
+#define	USBPHY_TX_USBPHY_TX_EDGECTRL_OFFSET		26
+#define	USBPHY_TX_USBPHY_TX_EDGECTRL_MASK		(0x7 << 26)
+#define	USBPHY_TX_USBPHY_TX_SYNC_INVERT			(1 << 25)
+#define	USBPHY_TX_USBPHY_TX_SYNC_MUX			(1 << 24)
+#define	USBPHY_TX_TXENCAL45DP				(1 << 21)
+#define	USBPHY_TX_TXCAL45DP_OFFSET			16
+#define	USBPHY_TX_TXCAL45DP_MASK			(0xf << 16)
+#define	USBPHY_TX_TXENCAL45DM				(1 << 13)
+#define	USBPHY_TX_TXCAL45DM_OFFSET			8
+#define	USBPHY_TX_TXCAL45DM_MASK			(0xf << 8)
+#define	USBPHY_TX_D_CAL_OFFSET				0
+#define	USBPHY_TX_D_CAL_MASK				0xf
+
+#define	USBPHY_RX_RXDBYPASS				(1 << 22)
+#define	USBPHY_RX_DISCONADJ_OFFSET			4
+#define	USBPHY_RX_DISCONADJ_MASK			(0x7 << 4)
+#define	USBPHY_RX_ENVADJ_OFFSET				0
+#define	USBPHY_RX_ENVADJ_MASK				0x7
+
+#define	USBPHY_CTRL_SFTRST				(1 << 31)
+#define	USBPHY_CTRL_CLKGATE				(1 << 30)
+#define	USBPHY_CTRL_UTMI_SUSPENDM			(1 << 29)
+#define	USBPHY_CTRL_HOST_FORCE_LS_SE0			(1 << 28)
+#define	USBPHY_CTRL_ENAUTOSET_USBCLKS			(1 << 26)
+#define	USBPHY_CTRL_ENAUTOCLR_USBCLKGATE		(1 << 25)
+#define	USBPHY_CTRL_FSDLL_RST_EN			(1 << 24)
+#define	USBPHY_CTRL_ENVBUSCHG_WKUP			(1 << 23)
+#define	USBPHY_CTRL_ENIDCHG_WKUP			(1 << 22)
+#define	USBPHY_CTRL_ENDPDMCHG_WKUP			(1 << 21)
+#define	USBPHY_CTRL_ENAUTOCLR_PHY_PWD			(1 << 20)
+#define	USBPHY_CTRL_ENAUTOCLR_CLKGATE			(1 << 19)
+#define	USBPHY_CTRL_ENAUTO_PWRON_PLL			(1 << 18)
+#define	USBPHY_CTRL_WAKEUP_IRQ				(1 << 17)
+#define	USBPHY_CTRL_ENIRQWAKEUP				(1 << 16)
+#define	USBPHY_CTRL_ENUTMILEVEL3			(1 << 15)
+#define	USBPHY_CTRL_ENUTMILEVEL2			(1 << 14)
+#define	USBPHY_CTRL_DATA_ON_LRADC			(1 << 13)
+#define	USBPHY_CTRL_DEVPLUGIN_IRQ			(1 << 12)
+#define	USBPHY_CTRL_ENIRQDEVPLUGIN			(1 << 11)
+#define	USBPHY_CTRL_RESUME_IRQ				(1 << 10)
+#define	USBPHY_CTRL_ENIRQRESUMEDETECT			(1 << 9)
+#define	USBPHY_CTRL_RESUMEIRQSTICKY			(1 << 8)
+#define	USBPHY_CTRL_ENOTGIDDETECT			(1 << 7)
+#define	USBPHY_CTRL_DEVPLUGIN_POLARITY			(1 << 5)
+#define	USBPHY_CTRL_ENDEVPLUGINDETECT			(1 << 4)
+#define	USBPHY_CTRL_HOSTDISCONDETECT_IRQ		(1 << 3)
+#define	USBPHY_CTRL_ENIRQHOSTDISCON			(1 << 2)
+#define	USBPHY_CTRL_ENHOSTDISCONDETECT			(1 << 1)
+
+#define	USBPHY_STATUS_RESUME_STATUS			(1 << 10)
+#define	USBPHY_STATUS_OTGID_STATUS			(1 << 8)
+#define	USBPHY_STATUS_DEVPLUGIN_STATUS			(1 << 6)
+#define	USBPHY_STATUS_HOSTDISCONDETECT_STATUS		(1 << 3)
+
+#define	USBPHY_DEBUG_CLKGATE				(1 << 30)
+#define	USBPHY_DEBUG_HOST_RESUME_DEBUG			(1 << 29)
+#define	USBPHY_DEBUG_SQUELCHRESETLENGTH_OFFSET		25
+#define	USBPHY_DEBUG_SQUELCHRESETLENGTH_MASK		(0xf << 25)
+#define	USBPHY_DEBUG_ENSQUELCHRESET			(1 << 24)
+#define	USBPHY_DEBUG_SQUELCHRESETCOUNT_OFFSET		16
+#define	USBPHY_DEBUG_SQUELCHRESETCOUNT_MASK		(0x1f << 16)
+#define	USBPHY_DEBUG_ENTX2RXCOUNT			(1 << 12)
+#define	USBPHY_DEBUG_TX2RXCOUNT_OFFSET			8
+#define	USBPHY_DEBUG_TX2RXCOUNT_MASK			(0xf << 8)
+#define	USBPHY_DEBUG_ENHSTPULLDOWN_OFFSET		4
+#define	USBPHY_DEBUG_ENHSTPULLDOWN_MASK			(0x3 << 4)
+#define	USBPHY_DEBUG_HSTPULLDOWN_OFFSET			2
+#define	USBPHY_DEBUG_HSTPULLDOWN_MASK			(0x3 << 2)
+#define	USBPHY_DEBUG_DEBUG_INTERFACE_HOLD		(1 << 1)
+#define	USBPHY_DEBUG_OTGIDPIDLOCK			(1 << 0)
+
+#define	USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_OFFSET	26
+#define	USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_MASK		(0x3f << 26)
+#define	USBPHY_DEBUG0_STATUS_UTMI_RXERROR_OFFSET	16
+#define	USBPHY_DEBUG0_STATUS_UTMI_RXERROR_MASK		(0x3ff << 16)
+#define	USBPHY_DEBUG0_STATUS_LOOP_BACK_OFFSET		0
+#define	USBPHY_DEBUG0_STATUS_LOOP_BACK_MASK		0xffff
+
+#define	USBPHY_DEBUG1_ENTAILADJVD_OFFSET		13
+#define	USBPHY_DEBUG1_ENTAILADJVD_MASK			(0x3 << 13)
+#define	USBPHY_DEBUG1_ENTX2TX				(1 << 12)
+#define	USBPHY_DEBUG1_DBG_ADDRESS_OFFSET		0
+#define	USBPHY_DEBUG1_DBG_ADDRESS_MASK			0xf
+
+#define	USBPHY_VERSION_MAJOR_MASK			(0xff << 24)
+#define	USBPHY_VERSION_MAJOR_OFFSET			24
+#define	USBPHY_VERSION_MINOR_MASK			(0xff << 16)
+#define	USBPHY_VERSION_MINOR_OFFSET			16
+#define	USBPHY_VERSION_STEP_MASK			0xffff
+#define	USBPHY_VERSION_STEP_OFFSET			0
+
+#define	USBPHY_IP_DIV_SEL_OFFSET			23
+#define	USBPHY_IP_DIV_SEL_MASK				(0x3 << 23)
+#define	USBPHY_IP_LFR_SEL_OFFSET			21
+#define	USBPHY_IP_LFR_SEL_MASK				(0x3 << 21)
+#define	USBPHY_IP_CP_SEL_OFFSET				19
+#define	USBPHY_IP_CP_SEL_MASK				(0x3 << 19)
+#define	USBPHY_IP_TSTI_TX_DP				(1 << 18)
+#define	USBPHY_IP_TSTI_TX_DM				(1 << 17)
+#define	USBPHY_IP_ANALOG_TESTMODE			(1 << 16)
+#define	USBPHY_IP_EN_USB_CLKS				(1 << 2)
+#define	USBPHY_IP_PLL_LOCKED				(1 << 1)
+#define	USBPHY_IP_PLL_POWER				(1 << 0)
+
+#endif	/* __REGS_USBPHY_H__ */

bjos/imx233/arch/sys_proto.h

@@ -0,0 +1,101 @@
+/*
+ * Freescale i.MX23/i.MX28 specific functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SYS_PROTO_H__
+#define __SYS_PROTO_H__
+
+#include <asm/imx-common/regs-common.h>
+
+int mxs_reset_block(struct mxs_register_32 *reg);
+int mxs_wait_mask_set(struct mxs_register_32 *reg,
+		       uint32_t mask,
+		       unsigned int timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg,
+		       uint32_t mask,
+		       unsigned int timeout);
+
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
+
+#ifdef CONFIG_SPL_BUILD
+
+#if defined(CONFIG_MX23)
+#include <asm/arch/iomux-mx23.h>
+#elif defined(CONFIG_MX28)
+#include <asm/arch/iomux-mx28.h>
+#endif
+
+void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
+			 const iomux_cfg_t *iomux_setup,
+			 const unsigned int iomux_size);
+#endif
+
+struct mxs_pair {
+	uint8_t	boot_pads;
+	uint8_t boot_mask;
+	const char *mode;
+};
+
+static const struct mxs_pair mxs_boot_modes[] = {
+#if defined(CONFIG_MX23)
+	{ 0x00, 0x0f, "USB" },
+	{ 0x01, 0x1f, "I2C, master" },
+	{ 0x02, 0x1f, "SSP SPI #1, master, NOR" },
+	{ 0x03, 0x1f, "SSP SPI #2, master, NOR" },
+	{ 0x04, 0x1f, "NAND" },
+	{ 0x06, 0x1f, "JTAG" },
+	{ 0x08, 0x1f, "SSP SPI #3, master, EEPROM" },
+	{ 0x09, 0x1f, "SSP SD/MMC #0" },
+	{ 0x0a, 0x1f, "SSP SD/MMC #1" },
+	{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
+#elif defined(CONFIG_MX28)
+	{ 0x00, 0x0f, "USB #0" },
+	{ 0x01, 0x1f, "I2C #0, master, 3V3" },
+	{ 0x11, 0x1f, "I2C #0, master, 1V8" },
+	{ 0x02, 0x1f, "SSP SPI #2, master, 3V3 NOR" },
+	{ 0x12, 0x1f, "SSP SPI #2, master, 1V8 NOR" },
+	{ 0x03, 0x1f, "SSP SPI #3, master, 3V3 NOR" },
+	{ 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" },
+	{ 0x04, 0x1f, "NAND, 3V3" },
+	{ 0x14, 0x1f, "NAND, 1V8" },
+	{ 0x06, 0x1f, "JTAG" },
+	{ 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" },
+	{ 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" },
+	{ 0x09, 0x1f, "SSP SD/MMC #0, 3V3" },
+	{ 0x19, 0x1f, "SSP SD/MMC #0, 1V8" },
+	{ 0x0a, 0x1f, "SSP SD/MMC #1, 3V3" },
+	{ 0x1a, 0x1f, "SSP SD/MMC #1, 1V8" },
+	{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
+#endif
+};
+
+#define MXS_BM_USB			0x00
+#define MXS_BM_I2C_MASTER_3V3		0x01
+#define MXS_BM_I2C_MASTER_1V8		0x11
+#define MXS_BM_SPI2_MASTER_3V3_NOR	0x02
+#define MXS_BM_SPI2_MASTER_1V8_NOR	0x12
+#define MXS_BM_SPI3_MASTER_3V3_NOR	0x03
+#define MXS_BM_SPI3_MASTER_1V8_NOR	0x13
+#define MXS_BM_NAND_3V3			0x04
+#define MXS_BM_NAND_1V8			0x14
+#define MXS_BM_JTAG			0x06
+#define MXS_BM_SPI3_MASTER_3V3_EEPROM	0x08
+#define MXS_BM_SPI3_MASTER_1V8_EEPROM	0x18
+#define MXS_BM_SDMMC0_3V3		0x09
+#define MXS_BM_SDMMC0_1V8		0x19
+#define MXS_BM_SDMMC1_3V3		0x0a
+#define MXS_BM_SDMMC1_1V8		0x1a
+
+struct mxs_spl_data {
+	uint8_t		boot_mode_idx;
+	uint32_t	mem_dram_size;
+};
+
+int mxs_dram_init(void);
+
+#endif	/* __SYS_PROTO_H__ */

bjos/imx233/imx233.c

@@ -0,0 +1,53 @@
+#include <stdint.h>
+#include <string.h>
+#include "imx233.h"
+
+// /code/u-boot/arch/arm/include/asm/arch-mxs
+
+void mmio_write(uint32_t reg, uint32_t data)
+{
+	*(volatile uint32_t *)reg = data;
+}
+ 
+uint32_t mmio_read(uint32_t reg)
+{
+	return *(volatile uint32_t *)reg;
+}
+
+void uart_putc(unsigned char byte)
+{
+	// Wait for UART to become ready to transmit.
+	//while (mmio_read(UART0_FR) & (1 << 5)) { }
+  while (*((volatile uint32_t*)0x80070018) & 32) {}; // check flag register for TXFF
+	*((volatile uint32_t *)UART0_DR) = byte;
+}
+
+unsigned char uart_getc()
+{
+  // Wait for UART to have received something.
+  while (*((volatile uint32_t*)0x80070018) & 16) {};
+  //while (mmio_read(UART0_FR) & (1 << 4)) { }
+  return *((volatile uint32_t *)UART0_DR);
+    //return 0;
+}
+
+void delay(int32_t count)
+{
+	__asm("__delay_%=: subs %[count], %[count], #1; bne __delay_%=\n"
+		 : : [count]"r"(count) : "cc");
+}
+
+void uart_write(const unsigned char* buffer, uint32_t size)
+{
+	for (uint32_t i = 0; i < size; i++) {
+		uart_putc(buffer[i]);
+  }
+}
+
+void uart_puts(const char* str)
+{
+	uart_write((const unsigned char*) str, strlen(str));
+}
+
+void uart_init() {
+}

bjos/imx233/imx233.h

@@ -0,0 +1,13 @@
+#define CONFIG_MX23
+
+#include "regs-base.h"
+
+#define HW_UARTDBGDR MXS_UARTDBG_BASE
+
+#define UART0_DR HW_UARTDBGDR
+
+void uart_putc(unsigned char byte);
+unsigned char uart_getc();
+void uart_write(const unsigned char* buffer, uint32_t size);
+void uart_puts(const char* str);
+void uart_init();

bjos/imx233/imx_fb.c

@@ -0,0 +1,516 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <stdint.h>
+
+//#include <common.h>
+//#include <exports.h>
+#include <video_fb.h>
+
+//#define BF_CS1(addr,mask,value) (value? (*(addr) |= mask) : (*(addr) ^= mask))
+
+#include "io.h"
+#include "arch/clock.h"
+#include "arch/imx-regs.h"
+//#include "arch/sys_proto.h"
+//#include "asm/imx-common/dma.h"
+
+/* 1 second delay should be plenty of time for block reset. */
+#define	RESET_MAX_TIMEOUT	1000000
+
+#define	MXS_BLOCK_SFTRST	(1 << 31)
+#define	MXS_BLOCK_CLKGATE	(1 << 30)
+
+#define	PS2KHZ(ps)	(1000000000UL / (ps))
+
+/*
+ * The PLL frequency is 480MHz and XTAL frequency is 24MHz
+ *   iMX23: datasheet section 4.2
+ *   iMX28: datasheet section 10.2
+ */
+#define	PLL_FREQ_KHZ	480000
+#define	PLL_FREQ_COEF	18
+#define	XTAL_FREQ_KHZ	24000
+
+#define	PLL_FREQ_MHZ	(PLL_FREQ_KHZ / 1000)
+#define	XTAL_FREQ_MHZ	(XTAL_FREQ_KHZ / 1000)
+#define MXC_SSPCLK_MAX MXC_SSPCLK0
+
+/******************************************************************
+ * Resolution Struct
+ ******************************************************************/
+struct ctfb_res_modes {
+	int xres;		/* visible resolution		*/
+	int yres;
+	int refresh;		/* vertical refresh rate in hz  */
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	int pixclock;		/* pixel clock in ps (pico seconds) */
+	int pixclock_khz;	/* pixel clock in kHz           */
+	int left_margin;	/* time from sync to picture	*/
+	int right_margin;	/* time from picture to sync	*/
+	int upper_margin;	/* time from sync to picture	*/
+	int lower_margin;
+	int hsync_len;		/* length of horizontal sync	*/
+	int vsync_len;		/* length of vertical sync	*/
+	int sync;		/* see FB_SYNC_*		*/
+	int vmode;		/* see FB_VMODE_*		*/
+};
+
+static void mxs_lcd_init(GraphicDevice *panel, struct ctfb_res_modes *mode, int bpp);
+
+int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
+                      int timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
+                      int timeout);
+int mxs_reset_block(struct mxs_register_32 *reg);
+void mxs_set_lcdclk(uint32_t freq);
+
+void blit_string(char* str, int len, int x, int y);
+void *memset(void *s, int c, size_t n);
+
+#define FRAMEBUFFER (uint8_t*)0x40003e80
+#define FB_PITCH 640
+
+int hello_world (int argc, char * const argv[])
+{
+	int i;
+
+  struct ctfb_res_modes mode;
+
+/*
+ * DENX M28EVK:
+ * setenv videomode
+ * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
+ *       le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
+ *
+ * Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel:
+ * setenv videomode
+ * video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851,
+ * 	 le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
+ */
+
+  // http://tinyvga.com/vga-timing/640x480@60Hz
+
+  // success!
+  // green line: mw.b 0x40003e80 0x04 0x280
+
+  // loadx 0x43000000
+  // go 0x43000000
+  
+  mode.xres = 640;
+  mode.yres = 480;
+  mode.refresh = 31468; // seems unused
+  mode.pixclock_khz = 25175; // unused, see picoseconds
+  mode.hsync_len = 96;
+  mode.vsync_len = 2;
+  mode.pixclock = 39721; // picoseconds
+  mode.lower_margin = 33;
+  mode.upper_margin = 10;
+  mode.left_margin = 48;
+  mode.right_margin = 16;
+
+  // exec !! sx /home/mntmn/code/u-boot/examples/standalone/hello_world.bin
+
+  GraphicDevice gdevice; // only framebuffer is relevant here
+
+  gdevice.frameAdrs = (uint32_t)(FRAMEBUFFER-0x3e80);
+
+  /*
+    PINS:
+
+    CON1
+    28 VSYNC
+    29 HSYNC
+
+    4-11 DATA (RGB)
+  */ 
+
+  //printf ("Interim? MXS_LCDIF_BASE at %p\n", (void*)MXS_LCDIF_BASE);
+
+  mxs_lcd_init(&gdevice, &mode, 8);
+
+  //printf("mxs_lcd_init done!\n");
+
+  //&imx_ccm->cgr3 |= (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | MXC_CCM_CCGR3_DISP_AXI_MASK);
+  //&imx_ccm->cgr2 |= (MXC_CCM_CCGR2_LCD_MASK);
+
+  /*
+	mxs_set_lcdclk(PS2KHZ(mode->pixclock));
+	mxs_reset_block(&lcdif->hw_lcdif_ctrl_reg);
+
+  
+  //enable_lcdif_clock(&lcdif->hw_lcdif_ctrl);
+
+  BF_CS1(&lcdif->hw_lcdif_ctrl, LCDIF_CTRL_DOTCLK_MODE, 1);
+  BF_CS1(&lcdif->hw_lcdif_ctrl, LCDIF_CTRL_BYPASS_COUNT, 1);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_VSYNC_OEB, 0); //Vsync is always an output in the DOTCLK mode
+
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_VSYNC_POL, 0);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_HSYNC_POL, 0);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_DOTCLK_POL, 0);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_ENABLE_POL, 0);
+
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_ENABLE_PRESENT, 1);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT, 1);
+  BF_CS1(&lcdif->hw_lcdif_vdctrl0, LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT, 1);
+  
+  lcdif->hw_lcdif_vdctrl0 ^= LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK;
+  lcdif->hw_lcdif_vdctrl0 |= 2<<LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET;
+  
+  lcdif->hw_lcdif_vdctrl1 ^= LCDIF_VDCTRL1_VSYNC_PERIOD_MASK;
+  lcdif->hw_lcdif_vdctrl1 |= 280<<LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET;
+
+  lcdif->hw_lcdif_vdctrl2 ^= LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK;
+  lcdif->hw_lcdif_vdctrl2 |= 10<<LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET;
+  
+  lcdif->hw_lcdif_vdctrl2 ^= LCDIF_VDCTRL2_HSYNC_PERIOD_MASK;
+  lcdif->hw_lcdif_vdctrl2 |= 360<<LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET;
+  
+  //Assuming LCD_DATABUS_WIDTH
+  //is 24bit
+
+  BF_CS1(&lcdif->hw_lcdif_vdctrl3, LCDIF_VDCTRL3_VSYNC_ONLY, 0);
+  
+  lcdif->hw_lcdif_vdctrl3 ^= LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK;
+  lcdif->hw_lcdif_vdctrl3 |= 20<<LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET;
+  
+  lcdif->hw_lcdif_vdctrl3 ^= LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK;
+  lcdif->hw_lcdif_vdctrl3 |= 20<<LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET;
+  
+  lcdif->hw_lcdif_vdctrl4 ^= LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK;
+  lcdif->hw_lcdif_vdctrl4 |= 320<<LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET;
+  
+  //Note that DOTCLK_V_VALID_DATA_CNT is
+  //implicitly assumed to be HW_LCDIF_TRANSFER_COUNT_V_COUNT
+
+  BF_CS1(&lcdif->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON, 1);
+  BF_CS1(&lcdif->hw_lcdif_ctrl, LCDIF_CTRL_RUN, 1);
+
+  // HW_LCDIF_CUR_BUF*/
+
+  
+	//printf("Enter + to exit ... \n");
+
+  //memset(FRAMEBUFFER, 0, 640*480);
+  
+  int cursor_x=0;
+  int cursor_y=32;
+  char* greeting = "Welcome to Interim/IMX 0.0.1!";
+  blit_string(greeting,29,0,16);
+  
+  while (true) {
+    while (!tstc());
+    /* consume input */
+    char c = getc();
+    blit_string(&c,1,cursor_x,cursor_y);
+    cursor_x+=8;
+    if (cursor_x>=640) {
+      cursor_x=0;
+      cursor_y+=8;
+    }
+    if (c==10 || c==13) {
+      cursor_x=0;
+      cursor_y+=8;
+    }
+    if (c=='+') {
+      //printf ("\n\n");
+      return(0);
+    }
+  }
+
+	return (0);
+}
+
+
+static void mxs_lcd_init(GraphicDevice *panel,
+			struct ctfb_res_modes *mode, int bpp)
+{
+	struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+	uint32_t word_len = 0, bus_width = 0;
+	uint8_t valid_data = 0;
+
+	/* Kick in the LCDIF clock */
+	mxs_set_lcdclk(mode->pixclock_khz); //PS2KHZ(mode->pixclock));
+
+	/* Restart the LCDIF block */
+	mxs_reset_block(&regs->hw_lcdif_ctrl_reg);
+
+  struct mxs_pinctrl_regs *pin = (struct mxs_pinctrl_regs*)MXS_PINCTRL_BASE;
+
+  // switch lcd hsync, vsync pins on
+  pin->hw_pinctrl_muxsel3 ^= ((1<<16)|(1<<17)|(1<<18)|(1<<19));
+  pin->hw_pinctrl_muxsel3 ^= ((1<<12)|(1<<13)|(1<<14)|(1<<15));
+
+  // rgb pins (lcd data)
+  pin->hw_pinctrl_muxsel2 ^= ((1<<0)|(1<<1)|(1<<2)|(1<<3));
+  pin->hw_pinctrl_muxsel2 ^= ((1<<4)|(1<<5)|(1<<6)|(1<<7));
+  pin->hw_pinctrl_muxsel2 ^= ((1<<8)|(1<<9)|(1<<10)|(1<<11));
+  pin->hw_pinctrl_muxsel2 ^= ((1<<12)|(1<<13)|(1<<14)|(1<<15));
+  
+  
+	switch (bpp) {
+	case 24:
+		word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
+		bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT;
+		valid_data = 0x7;
+		break;
+	case 18:
+		word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
+		bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT;
+		valid_data = 0x7;
+		break;
+	case 16:
+		word_len = LCDIF_CTRL_WORD_LENGTH_16BIT;
+		bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT;
+		valid_data = 0xf;
+		break;
+	case 8:
+		word_len = LCDIF_CTRL_WORD_LENGTH_8BIT;
+		bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT;
+		valid_data = 0xf;
+		break;
+	}
+
+	writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE |
+		LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER,
+		&regs->hw_lcdif_ctrl);
+
+	writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET,
+		&regs->hw_lcdif_ctrl1);
+
+	//mxsfb_system_setup();
+
+	writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres,
+		&regs->hw_lcdif_transfer_count);
+
+	writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL |
+		LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT |
+		LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
+		mode->vsync_len, &regs->hw_lcdif_vdctrl0);
+  
+	writel(mode->upper_margin + mode->lower_margin +
+		mode->vsync_len + mode->yres,
+		&regs->hw_lcdif_vdctrl1);
+  
+	writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) |
+		(mode->left_margin + mode->right_margin +
+		mode->hsync_len + mode->xres),
+		&regs->hw_lcdif_vdctrl2);
+  
+	writel(((mode->left_margin + mode->hsync_len) <<
+		LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) |
+		(mode->upper_margin + mode->vsync_len) | LCDIF_VDCTRL3_MUX_SYNC_SIGNALS,
+		&regs->hw_lcdif_vdctrl3);
+  
+	writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres,
+		&regs->hw_lcdif_vdctrl4);
+
+	writel(panel->frameAdrs, &regs->hw_lcdif_cur_buf);
+	writel(panel->frameAdrs, &regs->hw_lcdif_next_buf);
+
+	/* Flush FIFO first */
+	writel(LCDIF_CTRL1_FIFO_CLEAR, &regs->hw_lcdif_ctrl1_set);
+
+	/* Sync signals ON */
+	setbits_le32(&regs->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON);
+
+	/* FIFO cleared */
+	writel(LCDIF_CTRL1_FIFO_CLEAR, &regs->hw_lcdif_ctrl1_clr);
+
+	/* RUN! */
+	writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);
+}
+
+
+void mxs_set_lcdclk(uint32_t freq)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	uint32_t fp, x, k_rest, k_best, x_best, tk;
+	int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff;
+
+	if (freq == 0)
+		return;
+
+#if defined(CONFIG_MX23)
+	writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#elif defined(CONFIG_MX28)
+	writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
+#endif
+
+	/*
+	 *             /               18 \     1       1
+	 * freq kHz = | 480000000 Hz * --  | * --- * ------
+	 *             \                x /     k     1000
+	 *
+	 *      480000000 Hz   18
+	 *      ------------ * --
+	 *        freq kHz      x
+	 * k = -------------------
+	 *             1000
+	 */
+
+	fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18;
+
+	for (x = 18; x <= 35; x++) {
+		tk = fp / x;
+		if ((tk / 1000 == 0) || (tk / 1000 > 255))
+			continue;
+
+		k_rest = tk % 1000;
+
+		if (k_rest < (k_best_l % 1000)) {
+			k_best_l = tk;
+			x_best_l = x;
+		}
+
+		if (k_rest > (k_best_t % 1000)) {
+			k_best_t = tk;
+			x_best_t = x;
+		}
+	}
+
+	if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) {
+		k_best = k_best_l;
+		x_best = x_best_l;
+	} else {
+		k_best = k_best_t;
+		x_best = x_best_t;
+	}
+
+	k_best /= 1000;
+
+#if defined(CONFIG_MX23)
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);
+
+	writel(CLKCTRL_PIX_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_pix_set);
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
+			CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE,
+			k_best << CLKCTRL_PIX_DIV_OFFSET);
+
+	while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
+		;
+#elif defined(CONFIG_MX28)
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]);
+	writeb(CLKCTRL_FRAC_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]);
+
+	writel(CLKCTRL_DIS_LCDIF_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_lcdif_set);
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif,
+			CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE,
+			k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET);
+
+	while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY)
+		;
+#endif
+}
+
+
+int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned
+								int timeout)
+{
+	while (--timeout) {
+		if ((readl(&reg->reg) & mask) == mask)
+			break;
+		udelay(1);
+	}
+
+	return !timeout;
+}
+
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned
+								int timeout)
+{
+	while (--timeout) {
+		if ((readl(&reg->reg) & mask) == 0)
+			break;
+		udelay(1);
+	}
+
+	return !timeout;
+}
+
+
+int mxs_reset_block(struct mxs_register_32 *reg)
+{
+	/* Clear SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear CLKGATE */
+	writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
+
+	/* Set SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_set);
+
+	/* Wait for CLKGATE being set */
+	if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear SFTRST */
+	writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+		return 1;
+
+	/* Clear CLKGATE */
+	writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
+
+	if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+		return 1;
+
+	return 0;
+}
+
+void *memset(void *s, int c, size_t n)
+{
+    unsigned char* p=s;
+    while(n--)
+        *p++ = (unsigned char)c;
+    return s;
+}
+
+#include "font_c64.h"
+#define FONT FONT_C64
+
+void blit_string(char* str, int len, int x, int y) {
+
+  uint8_t* dst = FRAMEBUFFER+y*FB_PITCH+x;
+  int i = 0, line = 0;
+  
+  for (i=0; i<len; i++) {
+    int offset = ((int)str[i]) * 8;
+    for (line=0; line<8; line++) {
+      uint8_t pixels = FONT[offset+line];
+      
+      *dst++ = (pixels&128)>0?0xff:0x00;
+      *dst++ = (pixels&64)>0?0xff:0x00;
+      *dst++ = (pixels&32)>0?0xff:0x00;
+      *dst++ = (pixels&16)>0?0xff:0x00;
+      *dst++ = (pixels&8)>0?0xff:0x00;
+      *dst++ = (pixels&4)>0?0xff:0x00;
+      *dst++ = (pixels&2)>0?0xff:0x00;
+      *dst   = (pixels&1)>0?0xff:0x00;
+      
+      dst+=FB_PITCH-7;
+    }
+    dst-=(FB_PITCH*8);
+    dst+=8;
+  }
+}

bjos/imx233/io.h

@@ -0,0 +1,458 @@
+/*
+ *  linux/include/asm-arm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+//#include <linux/types.h>
+//#include <asm/byteorder.h>
+//#include <asm/memory.h>
+#if 0	/* XXX###XXX */
+#include <asm/arch/hardware.h>
+#endif	/* XXX###XXX */
+
+static inline void sync(void)
+{
+}
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+#define MAP_NOCACHE	(0)
+#define MAP_WRCOMBINE	(0)
+#define MAP_WRBACK	(0)
+#define MAP_WRTHROUGH	(0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+	return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
+/*
+ * Generic virtual read/write.  Note that we don't support half-word
+ * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
+ * to the architecture specific code.
+ */
+#define __arch_getb(a)			(*(volatile unsigned char *)(a))
+#define __arch_getw(a)			(*(volatile unsigned short *)(a))
+#define __arch_getl(a)			(*(volatile unsigned int *)(a))
+#define __arch_getq(a)			(*(volatile unsigned long long *)(a))
+
+#define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+#define __arch_putq(v,a)		(*(volatile unsigned long long *)(a) = (v))
+
+static inline void __raw_writesb(unsigned long addr, const void *data,
+				 int bytelen)
+{
+	uint8_t *buf = (uint8_t *)data;
+	while(bytelen--)
+		__arch_putb(*buf++, addr);
+}
+
+static inline void __raw_writesw(unsigned long addr, const void *data,
+				 int wordlen)
+{
+	uint16_t *buf = (uint16_t *)data;
+	while(wordlen--)
+		__arch_putw(*buf++, addr);
+}
+
+static inline void __raw_writesl(unsigned long addr, const void *data,
+				 int longlen)
+{
+	uint32_t *buf = (uint32_t *)data;
+	while(longlen--)
+		__arch_putl(*buf++, addr);
+}
+
+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+{
+	uint8_t *buf = (uint8_t *)data;
+	while(bytelen--)
+		*buf++ = __arch_getb(addr);
+}
+
+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+{
+	uint16_t *buf = (uint16_t *)data;
+	while(wordlen--)
+		*buf++ = __arch_getw(addr);
+}
+
+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+{
+	uint32_t *buf = (uint32_t *)data;
+	while(longlen--)
+		*buf++ = __arch_getl(addr);
+}
+
+#define __raw_writeb(v,a)	__arch_putb(v,a)
+#define __raw_writew(v,a)	__arch_putw(v,a)
+#define __raw_writel(v,a)	__arch_putl(v,a)
+#define __raw_writeq(v,a)	__arch_putq(v,a)
+
+#define __raw_readb(a)		__arch_getb(a)
+#define __raw_readw(a)		__arch_getw(a)
+#define __raw_readl(a)		__arch_getl(a)
+#define __raw_readq(a)		__arch_getq(a)
+
+/*
+ * TODO: The kernel offers some more advanced versions of barriers, it might
+ * have some advantages to use them instead of the simple one here.
+ */
+#define mb()		asm volatile("dsb sy" : : : "memory")
+#define dmb()		__asm__ __volatile__ ("" : : : "memory")
+#define __iormb()	dmb()
+#define __iowmb()	dmb()
+
+#define writeb(v,c)	({ u8  __v = v; __iowmb(); __arch_putb(__v,c); __v; })
+#define writew(v,c)	({ u16 __v = v; __iowmb(); __arch_putw(__v,c); __v; })
+#define writel(v,c)	({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
+#define writeq(v,c)	({ u64 __v = v; __iowmb(); __arch_putq(__v,c); __v; })
+
+#define readb(c)	({ u8  __v = __arch_getb(c); __iormb(); __v; })
+#define readw(c)	({ u16 __v = __arch_getw(c); __iormb(); __v; })
+#define readl(c)	({ u32 __v = __arch_getl(c); __iormb(); __v; })
+#define readq(c)	({ u64 __v = __arch_getq(c); __iormb(); __v; })
+
+/*
+ * The compiler seems to be incapable of optimising constants
+ * properly.  Spell it out to the compiler in some cases.
+ * These are only valid for small values of "off" (< 1<<12)
+ */
+#define __raw_base_writeb(val,base,off)	__arch_base_putb(val,base,off)
+#define __raw_base_writew(val,base,off)	__arch_base_putw(val,base,off)
+#define __raw_base_writel(val,base,off)	__arch_base_putl(val,base,off)
+
+#define __raw_base_readb(base,off)	__arch_base_getb(base,off)
+#define __raw_base_readw(base,off)	__arch_base_getw(base,off)
+#define __raw_base_readl(base,off)	__arch_base_getl(base,off)
+
+/*
+ * Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define out_arch(type,endian,a,v)	__raw_write##type(cpu_to_##endian(v),a)
+#define in_arch(type,endian,a)		endian##_to_cpu(__raw_read##type(a))
+
+#define out_le64(a,v)	out_arch(q,le64,a,v)
+#define out_le32(a,v)	out_arch(l,le32,a,v)
+#define out_le16(a,v)	out_arch(w,le16,a,v)
+
+#define in_le64(a)	in_arch(q,le64,a)
+#define in_le32(a)	in_arch(l,le32,a)
+#define in_le16(a)	in_arch(w,le16,a)
+
+#define out_be32(a,v)	out_arch(l,be32,a,v)
+#define out_be16(a,v)	out_arch(w,be16,a,v)
+
+#define in_be32(a)	in_arch(l,be32,a)
+#define in_be16(a)	in_arch(w,be16,a)
+
+#define out_8(a,v)	__raw_writeb(v,a)
+#define in_8(a)		__raw_readb(a)
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#if 0	/* XXX###XXX */
+#include <asm/arch/io.h>
+#endif	/* XXX###XXX */
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerous
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)			__raw_writeb(v,__io(p))
+#define outw(v,p)			__raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p)			__raw_writel(cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)			__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)			__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)			__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)			__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)			__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)			__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)		outb((val),(port))
+#define outw_p(val,port)		outw((val),(port))
+#define outl_p(val,port)		outl((val),(port))
+#define inb_p(port)			inb((port))
+#define inw_p(port)			inw((port))
+#define inl_p(port)			inl((port))
+
+#define outsb_p(port,from,len)		outsb(port,from,len)
+#define outsw_p(port,from,len)		outsw(port,from,len)
+#define outsl_p(port,from,len)		outsl(port,from,len)
+#define insb_p(port,to,len)		insb(port,to,len)
+#define insw_p(port,to,len)		insw(port,to,len)
+#define insl_p(port,to,len)		insl(port,to,len)
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * linux/Documentation/IO-mapping.txt.  If you want a
+ * physical address, use __ioremap instead.
+ */
+extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags);
+extern void __iounmap(void *addr);
+
+/*
+ * Generic ioremap support.
+ *
+ * Define:
+ *  iomem_valid_addr(off,size)
+ *  iomem_to_phys(off)
+ */
+#ifdef iomem_valid_addr
+#define __arch_ioremap(off,sz,nocache)					\
+ ({									\
+	unsigned long _off = (off), _size = (sz);			\
+	void *_ret = (void *)0;						\
+	if (iomem_valid_addr(_off, _size))				\
+		_ret = __ioremap(iomem_to_phys(_off),_size,nocache);	\
+	_ret;								\
+ })
+
+#define __arch_iounmap __iounmap
+#endif
+
+#define ioremap(off,sz)			__arch_ioremap((off),(sz),0)
+#define ioremap_nocache(off,sz)		__arch_ioremap((off),(sz),1)
+#define iounmap(_addr)			__arch_iounmap(_addr)
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * If this architecture has PCI memory IO, then define the read/write
+ * macros.  These should only be used with the cookie passed from
+ * ioremap.
+ */
+#ifdef __mem_pci
+
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
+
+#define memset_io(c,v,l)		_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio(__mem_pci(c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(unsigned long io_addr, const unsigned char *signature,
+		int length)
+{
+	int retval = 0;
+	do {
+		if (readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#else
+#define memset_io(a, b, c)		memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c)		memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)		memcpy((void *)(a), (b), (c))
+
+#if !defined(readb)
+
+#define readb(addr)			(__readwrite_bug("readb"),0)
+#define readw(addr)			(__readwrite_bug("readw"),0)
+#define readl(addr)			(__readwrite_bug("readl"),0)
+#define writeb(v,addr)			__readwrite_bug("writeb")
+#define writew(v,addr)			__readwrite_bug("writew")
+#define writel(v,addr)			__readwrite_bug("writel")
+
+#define eth_io_copy_and_sum(a,b,c,d)	__readwrite_bug("eth_io_copy_and_sum")
+
+#define check_signature(io,sig,len)	(0)
+
+#endif
+#endif	/* __mem_pci */
+
+/*
+ * If this architecture has ISA IO, then define the isa_read/isa_write
+ * macros.
+ */
+#ifdef __mem_isa
+
+#define isa_readb(addr)			__raw_readb(__mem_isa(addr))
+#define isa_readw(addr)			__raw_readw(__mem_isa(addr))
+#define isa_readl(addr)			__raw_readl(__mem_isa(addr))
+#define isa_writeb(val,addr)		__raw_writeb(val,__mem_isa(addr))
+#define isa_writew(val,addr)		__raw_writew(val,__mem_isa(addr))
+#define isa_writel(val,addr)		__raw_writel(val,__mem_isa(addr))
+#define isa_memset_io(a,b,c)		_memset_io(__mem_isa(a),(b),(c))
+#define isa_memcpy_fromio(a,b,c)	_memcpy_fromio((a),__mem_isa(b),(c))
+#define isa_memcpy_toio(a,b,c)		_memcpy_toio(__mem_isa((a)),(b),(c))
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				eth_copy_and_sum((a),__mem_isa(b),(c),(d))
+
+static inline int
+isa_check_signature(unsigned long io_addr, const unsigned char *signature,
+		    int length)
+{
+	int retval = 0;
+	do {
+		if (isa_readb(io_addr) != *signature)
+			goto out;
+		io_addr++;
+		signature++;
+		length--;
+	} while (length);
+	retval = 1;
+out:
+	return retval;
+}
+
+#else	/* __mem_isa */
+
+#define isa_readb(addr)			(__readwrite_bug("isa_readb"),0)
+#define isa_readw(addr)			(__readwrite_bug("isa_readw"),0)
+#define isa_readl(addr)			(__readwrite_bug("isa_readl"),0)
+#define isa_writeb(val,addr)		__readwrite_bug("isa_writeb")
+#define isa_writew(val,addr)		__readwrite_bug("isa_writew")
+#define isa_writel(val,addr)		__readwrite_bug("isa_writel")
+#define isa_memset_io(a,b,c)		__readwrite_bug("isa_memset_io")
+#define isa_memcpy_fromio(a,b,c)	__readwrite_bug("isa_memcpy_fromio")
+#define isa_memcpy_toio(a,b,c)		__readwrite_bug("isa_memcpy_toio")
+
+#define isa_eth_io_copy_and_sum(a,b,c,d) \
+				__readwrite_bug("isa_eth_io_copy_and_sum")
+
+#define isa_check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_isa */
+#endif	/* __KERNEL__ */
+
+#include <iotrace.h>
+
+#endif	/* __ASM_ARM_IO_H */

bjos/imx233/regs-base.h

@@ -0,0 +1,121 @@
+/*
+ * Freescale i.MX23/i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MXS_REGS_BASE_H__
+#define __MXS_REGS_BASE_H__
+
+/*
+ * Register base addresses for i.MX23
+ */
+#if defined(CONFIG_MX23)
+#define	MXS_ICOLL_BASE		0x80000000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_ECC8_BASE		0x80008000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_ETM_BASE		0x80014000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_EMI_BASE		0x80020000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_BASE		0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_TVENC_BASE		0x80038000
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_AUDIOOUT_BASE	0x80048000
+#define	MXS_AUDIOIN_BASE	0x8004C000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_RTC_BASE		0x8005C000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006C000
+#define	MXS_UARTAPP1_BASE	0x8006E000
+#define	MXS_UARTDBG_BASE	0x80070000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_DRAM_BASE		0x800E0000
+
+/*
+ * Register base addresses for i.MX28
+ */
+#elif defined(CONFIG_MX28)
+#define	MXS_ICOL_BASE		0x80000000
+#define	MXS_HSADC_BASE		0x80002000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_PERFMON_BASE	0x80006000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80012000
+#define	MXS_SSP2_BASE		0x80014000
+#define	MXS_SSP3_BASE		0x80016000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_ETM_BASE		0x80022000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_AHB0_BASE	0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_CAN0_BASE		0x80032000
+#define	MXS_CAN1_BASE		0x80034000
+#define	MXS_SIMDBG_BASE		0x8003C000
+#define	MXS_SIMGPMISEL_BASE	0x8003C200
+#define	MXS_SIMSSPSEL_BASE	0x8003C300
+#define	MXS_SIMMEMSEL_BASE	0x8003C400
+#define	MXS_GPIOMON_BASE	0x8003C500
+#define	MXS_SIMENET_BASE	0x8003C700
+#define	MXS_ARMJTAG_BASE	0x8003C800
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_RTC_BASE		0x80056000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_I2C1_BASE		0x8005A000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006A000
+#define	MXS_UARTAPP1_BASE	0x8006C000
+#define	MXS_UARTAPP2_BASE	0x8006E000
+#define	MXS_UARTAPP3_BASE	0x80070000
+#define	MXS_UARTAPP4_BASE	0x80072000
+#define	MXS_UARTDBG_BASE	0x80074000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBPHY1_BASE	0x8007E000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_USBCTRL1_BASE	0x80090000
+#define	MXS_DFLPT_BASE		0x800C0000
+#define	MXS_DRAM_BASE		0x800E0000
+#define	MXS_ENET0_BASE		0x800F0000
+#define	MXS_ENET1_BASE		0x800F4000
+#else
+#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28
+#endif
+
+#endif /* __MXS_REGS_BASE_H__ */

bjos/main_imx233.c

@@ -0,0 +1,416 @@
+#include <stddef.h>
+#include <stdint.h>
+#include <stdio.h>
+#include "imx233/imx233.h"
+#include "sledge/machine.h"
+#include "sledge/minilisp.h"
+#include "sledge/alloc.h"
+#include "sledge/blit.h"
+
+#include <lightning.h>
+
+void main();
+
+extern uint32_t _bss_end;
+uint8_t* heap_end;
+
+void _cstartup(unsigned int r0, unsigned int r1, unsigned int r2)
+{
+  int i;
+  for (i=0;i<2000;i++) {
+    while (*((volatile uint32_t*)(0x80070018)) & 32) {}; // UART_PL01x_FR_TXFF
+    *((volatile uint32_t*)0x80070000) = '@';
+  }
+  
+  uart_puts("[interim] _cstartup\n");
+  heap_end = (uint8_t*)0x42300000; // 0x300000 reserved for kernel binary + stack
+  //memset(heap_end,0,1024*1024*16); // clear 16 MB of memory
+  main();
+  while(1) {};
+}
+
+// GPIO Register set
+volatile unsigned int* gpio;
+
+COLOR_TYPE* FB;
+COLOR_TYPE* FB_MEM;
+
+char buf[128];
+
+void enable_mmu(void);
+extern void* _get_stack_pointer();
+void uart_repl();
+
+//extern void libfs_init();
+//extern void uspi_keypress_handler(const char *str);
+
+static int have_eth = 0;
+uint8_t* eth_rx_buffer;
+
+void init_mini_ip(Cell* buffer_cell);
+
+void main()
+{
+  //enable_mmu();
+  //arm_invalidate_data_caches();
+
+  //uart_init(); // gpio setup also affects emmc TODO: document
+  
+  uart_puts("-- BOMBERJACKET/IMX233 kernel_main entered.\r\n");
+  setbuf(stdout, NULL);
+  
+  //libfs_init();
+
+  //init_rpi_qpu();
+  //uart_puts("-- QPU enabled.\r\n");
+
+  FB = (COLOR_TYPE*)0x40000000;
+  FB_MEM = FB;
+
+  init_blitter(FB);
+  
+  sprintf(buf, "-- framebuffer at %p.\r\n",FB);
+  uart_puts(buf);
+  
+  sprintf(buf, "-- heap starts at %p.\r\n", heap_end);
+  uart_puts(buf);
+  
+  sprintf(buf, "-- stack pointer at %p.\r\n", _get_stack_pointer());
+  uart_puts(buf);
+
+  memset(FB, 0x88, SCREEN_W*SCREEN_H*SCREEN_BPP);
+  
+  //eth_rx_buffer=malloc(64*1024);
+  
+  uart_repl();
+}
+
+//static struct fs* fat_fs;
+
+/*void vfs_register(struct fs *fs) {
+  printf("~~ vfs_register: %s/%s block_size: %d\r\n",fs->parent->device_name,fs->fs_name,fs->block_size);
+  printf("~~ read_directory: %p fopen: %p\r\n",fs->read_directory,fs->fopen);
+
+  //char* name = "/";
+
+  //struct dirent* dir = fs->read_directory(fs,&name);
+
+  //printf("~~ dirent: %p name: %s\r\n",dir,dir->name);
+  fat_fs = fs;
+  }*/
+
+void printhex(uint32_t num) {
+  char buf[9];
+  buf[8] = 0;
+  for (int i=7; i>=0; i--) {
+    int d = num&0xf;
+    if (d<10) buf[i]='0'+d;
+    else buf[i]='a'+d-10;
+    num=num>>4;
+  }
+  uart_puts(buf);
+}
+
+void printhex_signed(int32_t num) {
+  char buf[9];
+  buf[8] = 0;
+  if (num<0) {
+    uart_putc('-');
+    num=-num;
+  }
+  for (int i=7; i>=0; i--) {
+    int d = num&0xf;
+    if (d<10) buf[i]='0'+d;
+    else buf[i]='a'+d-10;
+    num=num/16;
+  }
+  uart_puts(buf);
+}
+
+#include "libc_glue.c"
+
+int machine_video_set_pixel(uint32_t x, uint32_t y, COLOR_TYPE color) {
+  if (x>=SCREEN_W || y>=SCREEN_H) return 0;
+  FB_MEM[y*1920+x] = color;
+  
+  return 0;
+}
+
+int machine_video_rect(uint32_t x, uint32_t y, uint32_t w, uint32_t h, COLOR_TYPE color) {
+  uint32_t y1=y;
+  uint32_t y2=y+h;
+  uint32_t x2=x+w;
+  uint32_t off = y1*SCREEN_W;
+
+  // FIXME: clip!
+  
+  for (; y1<y2; y1++) {
+    for (uint32_t x1=x; x1<x2; x1++) {
+      FB_MEM[off+x1] = color;
+    }
+    off+=SCREEN_W;
+  }
+
+  return 0;
+}
+
+Cell* lookup_global_symbol(char* name);
+
+void memdump(jit_word_t start,uint32_t len,int raw);
+
+int ethernet_rx(uint8_t* packet) {
+  int frame_len = 0;
+  if (have_eth) {
+    //USPiReceiveFrame(packet, &frame_len);
+
+    if (frame_len) {
+      printf("[eth] frame received! len: %d\r\n",frame_len);   
+      memdump((uint32_t)packet,frame_len,0);
+    }
+  }
+  return frame_len;
+}
+
+void ethernet_tx(uint8_t* packet, int len) {
+  //USPiSendFrame(packet, len);
+  printf("[eth] frame sent (%d)\r\n",len);
+}
+
+int machine_video_flip() {
+  //memset(FB_MEM, 0xffffff, 1920*1080*4);
+  return 0;
+}
+
+static char usb_key_in = 0;
+static int usb_keyboard_enabled = 0;
+
+int machine_get_key(int modifiers) {
+  if (modifiers) return 0;
+  int k = 0;
+  if (usb_keyboard_enabled) {
+    k = usb_key_in;
+    usb_key_in = 0;
+  } else {
+    k = uart_getc();
+    if (k==27) {
+      k = uart_getc();
+      if (k==91) {
+        k = uart_getc();
+        if (k==27) {
+          // fast repetition
+          k = uart_getc();
+          k = uart_getc();
+        }
+        if (k==68) return 130;
+        if (k==67) return 131;
+        if (k==65) return 132;
+        if (k==66) return 133;
+        printf("~~ inkey unknown sequence: 91,%d\r\n",k);
+        return 0;
+      }
+    }
+  }
+  return k;
+}
+
+Cell* machine_save_file(Cell* cell, char* path) {
+  return alloc_int(0);
+}
+
+static char sysfs_tmp[1024];
+
+Cell* machine_load_file(char* path) {
+  // sysfs
+  if (!strcmp(path,"/sys/mem")) {
+    MemStats* mst = alloc_stats();
+    sprintf(sysfs_tmp, "(%d %d %d %d)", mst->byte_heap_used, mst->byte_heap_max, mst->cells_used, mst->cells_max);
+    return read_string(sysfs_tmp);
+  }
+
+  Cell* result_cell = alloc_int(0);
+  return result_cell;
+}
+
+typedef jit_word_t (*funcptr)();
+static jit_state_t *_jit;
+static jit_state_t *_jit_saved;
+static void *stack_ptr, *stack_base;
+
+#include "sledge/compiler.c"
+
+void insert_rootfs_symbols() {
+  // until we have a file system, inject binaries that are compiled in the kernel
+  // into the environment
+  
+  /*extern uint8_t _binary_bjos_rootfs_unifont_start;
+  extern uint32_t _binary_bjos_rootfs_unifont_size;
+  Cell* unif = alloc_bytes(16);
+  unif->addr = &_binary_bjos_rootfs_unifont_start;
+  unif->size = _binary_bjos_rootfs_unifont_size;
+
+  printf("~~ unifont is at %p\r\n",unif->addr);
+  
+  extern uint8_t* blitter_speedtest(uint8_t* font);
+  unif->addr = blitter_speedtest(unif->addr);
+
+  insert_symbol(alloc_sym("unifont"), unif, &global_env);
+  */
+  
+  /*extern uint8_t _binary_bjos_rootfs_editor_l_start;
+  extern uint32_t _binary_bjos_rootfs_editor_l_size;
+  Cell* editor = alloc_string("boot");
+  editor->addr = &_binary_bjos_rootfs_editor_l_start;
+  editor->size = read_word((uint8_t*)&_binary_bjos_rootfs_editor_l_size,0); //_binary_bjos_rootfs_editor_l_size;
+
+  printf("~~ editor-source is at %p, size %d\r\n",editor->addr,editor->size);
+  
+  insert_symbol(alloc_sym("editor-source"), editor, &global_env);*/
+
+  //Cell* boot = alloc_string("(eval (load \"/sd/boot.l\"))");
+  //insert_symbol(alloc_sym("boot-source"), boot, &global_env);
+  
+  //Cell* udp_cell = alloc_num_bytes(65535);
+  //insert_symbol(alloc_sym("network-input"), udp_cell, &global_env);
+
+  //init_mini_ip(udp_cell);
+}
+
+void uart_repl() {
+  uart_puts("~~ trying to malloc repl buffers\r\n");
+  char* out_buf = malloc(1024*10);
+  char* in_line = malloc(1024*2);
+  char* in_buf = malloc(1024*10);
+  uart_puts("\r\n\r\n++ welcome to sledge arm/32 (c)2015 mntmn.\r\n");
+  
+  init_compiler();
+  insert_rootfs_symbols();
+
+  uart_puts("\r\n~~ compiler initialized.\r\n");
+  
+  memset(out_buf,0,1024*10);
+  memset(in_line,0,1024*2);
+  memset(in_buf,0,1024*10);
+
+  // jit stack
+  stack_ptr = stack_base = malloc(4096 * sizeof(jit_word_t));
+
+  long count = 0;  
+  int fullscreen = 0;
+  
+  int in_offset = 0;
+  int parens = 0;
+
+  int linec = 0;
+
+  Cell* expr;
+  char c = 13;
+
+  //strcpy(in_line,"(eval (load \"/sd/boot.l\"))\n");
+  
+  init_jit(NULL);
+  uart_puts("\r\n\r\n~~ JIT initialized.\r\n");
+
+  while (1) {
+    expr = NULL;
+    
+    uart_puts("sledge> ");
+
+    int i = 0;
+
+    while (c!=13) {
+      c = uart_getc();
+      uart_putc(c);
+      in_line[i++] = c;
+      in_line[i] = 0;
+    }
+    c = 0;
+    
+    int len = strlen(in_line);
+
+    // recognize parens
+    
+    for (i=0; i<len; i++) {
+      if (in_line[i] == '(') {
+        parens++;
+      } else if (in_line[i] == ')') {
+        parens--;
+      }
+    }
+
+    //printf("parens: %d in_offset: %d\n",parens,in_offset);
+
+    if (len>1) {
+      strncpy(in_buf+in_offset, in_line, len-1);
+      in_buf[in_offset+len-1] = 0;
+      
+      //printf("line: '%s' (%d)\n",in_buf,strlen(in_buf));
+      
+      linec++;
+      //if (linec>10) while (1) {};
+    }
+    printf("\r\n[%s]\r\n",in_buf);
+    
+    if (parens>0) {
+      printf("\r\n...\r\n");
+      in_offset+=len-1;
+    } else {
+      if (len>1) {
+        expr = read_string(in_buf);
+        in_offset=0;
+      }
+    }
+    //printf("parens: %d offset: %d\n",parens,in_offset);
+    
+    jit_node_t  *in;
+    //funcptr     compiled;
+
+    if (expr) {
+      _jit = jit_new_state();
+      
+      //jit_prolog();
+      
+      int success = compile_arg(JIT_R0, expr, TAG_ANY);
+
+      //jit_movi(JIT_R0, 0);
+      
+      jit_retr(JIT_R0);
+
+      //int success = 1;
+
+      if (success) {
+        funcptr compiled = jit_emit();
+
+        //jit_disassemble();
+
+        //start_clock();
+
+        /*uint32_t compiled[] = {
+          0xe3a03005,  // mov     r3, #5
+          0xe1a00003,  // mov     r0, r3
+          0xe12fff1e   // bx      lr
+          };*/
+        
+        printf("-- compiled: %p\r\n",compiled);
+        memdump((uint32_t)compiled,200,1);
+
+        printf("-- jumping to code…");
+        //Cell* res = expr;
+        Cell* res = (Cell*)((funcptr)compiled)();
+        printf("-- res at: %p\r\n",res);
+
+        // TODO: move to write op
+        if (!res || res<heap_end) {
+          uart_puts("null\n");
+        } else {
+          lisp_write(res, out_buf, 1024*10);
+          uart_puts(out_buf);
+        }
+      }
+      
+      uart_puts("\r\n");
+      
+      jit_clear_state();
+      jit_destroy_state();
+    }
+  }
+}

bjos/rpi2/arm_start.S

@@ -14,13 +14,13 @@ _start:
 	blt 1b	// if not repeat
   
   // enable FPU (VFP/NEON)
-  mrc p15, #0, r1, c1, c0, #2	
+  /*mrc p15, #0, r1, c1, c0, #2	
 	orr r1, r1, #(0xf << 20)
 	mcr p15, #0, r1, c1, c0, #2
 	mov r1, #0
 	mcr p15, #0, r1, c7, c5, #4
 	mov r0,#0x40000000
-	fmxr FPEXC, r0
+	fmxr FPEXC, r0*/
   
 	// jump to kernel_main
 	ldr r3, =_cstartup

bjos/sledge/alloc.c

@@ -14,8 +14,9 @@ uint32_t free_list_consumed;
 
 Cell oom_cell;
 
-#define MAX_CELLS 5000000
-#define MAX_BYTE_HEAP 1024*1024*128
+// TODO define in machine specs
+#define MAX_CELLS 1000000
+#define MAX_BYTE_HEAP 1024*1024*8
 
 static struct MemStats mem_stats;
 
@@ -35,10 +36,16 @@ void init_allocator() {
   memset(cell_heap,0,cell_mem_reserved);
 
   free_list = malloc(MAX_CELLS*sizeof(Cell*));
+
+  printf("[allocator] initialized.\r\n");
   
   //byte_heap = malloc(MAX_BYTE_HEAP);
 }
 
+Cell* get_cell_heap() {
+  return cell_heap;
+}
+
 Cell* cell_alloc() {
   if (free_list_avail>free_list_consumed) {
     // serve from free list
@@ -103,24 +110,34 @@ void mark_tree(Cell* c) {
       lisp_write((Cell*)c->addr, buf, 511);
       printf("~~ mark lambda args: %s\n",buf);*/
       mark_tree((Cell*)c->addr); // function arguments
+      mark_tree((Cell*)c->next); // function signature
     }
   }
 }
 
-int collect_garbage(env_entry* global_env) {
+void collect_garbage_iter(const char *key, void *value, const void *obj)
+{
+  env_entry* e = (env_entry*)value;
+  printf("key: %s value: %s\n", key, value);
+  mark_tree(e->cell);
+}
+
+int collect_garbage(env_t* global_env) {
   // mark
 
   // check all symbols in the environment
   // and look where they lead (cons trees, bytes, strings)
   // mark all of them as usable
 
-  for (env_entry* e=global_env; e != NULL; e=e->hh.next) {
+  sm_enum(global_env, collect_garbage_iter, NULL);
+
+  /*for (env_entry* e=global_env; e != NULL; e=e->hh.next) {
     //printf("env entry: %s pointing to %p\n",e->name,e->cell);
     if (!e->cell) {
       //printf("~! warning: NULL env entry %s.\n",e->name);
     }
     mark_tree(e->cell);
-  }
+  }*/
 
   // sweep -- free all things that are not marked
 
@@ -198,6 +215,14 @@ Cell* alloc_cons(Cell* ar, Cell* dr) {
   return cons;
 }
 
+Cell* alloc_list(Cell** items, int num) {
+  Cell* list = alloc_nil();
+  for (int i=num-1; i>=0; i--) {
+    list = alloc_cons(items[i], list);
+  }
+  return list;
+}
+
 //extern void uart_puts(char* str);
 extern void memdump(jit_word_t start,uint32_t len,int raw);
 
@@ -295,11 +320,11 @@ Cell* alloc_concat(Cell* str1, Cell* str2) {
   return cell;
 }
 
-Cell* alloc_builtin(unsigned int b) {
+Cell* alloc_builtin(unsigned int b, Cell* signature) {
   Cell* num = cell_alloc();
   num->tag = TAG_BUILTIN;
   num->value = b;
-  num->next = 0;
+  num->next = signature;
   return num;
 }
 

bjos/sledge/alloc.h

@@ -4,6 +4,9 @@
 #include "minilisp.h"
 #include <string.h>
 #include <stdio.h>
+#include "strmap.h"
+
+#define env_t StrMap
 
 enum cell_allocator_t {
   CA_STACK,
@@ -19,11 +22,13 @@ typedef struct MemStats {
 
 void init_allocator();
 
+Cell* get_cell_heap();
 void* cell_malloc(int num_bytes);
 void* cell_realloc(void* old_addr, unsigned int old_size, unsigned int num_bytes);
-int collect_garbage(env_entry* global_env);
+int collect_garbage(env_t* global_env);
 
 Cell* alloc_cons(Cell* ar, Cell* dr);
+Cell* alloc_list(Cell** items, int num);
 Cell* alloc_sym(char* str);
 Cell* alloc_bytes();
 Cell* alloc_num_bytes(unsigned int num_bytes);
@@ -36,7 +41,7 @@ Cell* alloc_int(int i);
 Cell* alloc_nil();
 Cell* alloc_error(unsigned int code);
 Cell* alloc_lambda(Cell* args);
-Cell* alloc_builtin(unsigned int b);
+Cell* alloc_builtin(unsigned int b, Cell* signature);
 Cell* alloc_clone(Cell* orig);
 
 MemStats* alloc_stats();

bjos/sledge/arm_emu.c

@@ -0,0 +1,1034 @@
+/*
+ * Arm Processor Emulator
+ *
+ *  Created on: Nov 12, 2012
+ *      Author: mdixon
+ *   Edited By: omufeed
+ */
+
+// #include some headers you will be probably need
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+
+//Defines some types of our own. note: base these on platform independent types defined in <stdint.h>
+typedef uint64_t REGISTER;		//registers are 32 bits
+typedef uint64_t WORD;			//words are 32 bits
+typedef int32_t SWORD;			//swords are 32 bits
+typedef uint8_t BYTE;			//bytes are 8 bits
+typedef uint8_t BIT;			//define bit data type
+
+//Define the shift amount for specific bits
+#define POS_CONDCODE (28)//Condition code
+#define POS_INSTYPE (26)//Instruction type
+#define POS_OPCODE (21)//Operation code
+#define POS_I (25)//Immediate bit
+#define POS_L (24)//Link bit
+#define POS_S (20)//Status bit
+#define POS_REGN (16)//regN
+#define POS_REGDEST (12)//regDest
+#define POS_ISHIFT (8)//Shift amount for immediate value
+#define POS_SHIFT (4)//Shift amount for operand register
+#define POS_IOPERAND (0)//Immediate value
+#define POS_OPERAND (0)//Operand register
+#define POS_N (31)//Negative bit
+
+#define POS_BOFFSET (0)//Offset for branch
+
+#define POS_P (24)//Pre/Post bit
+#define POS_U (23)//Up/Down bit
+#define POS_B (22)//Byte/Word bit
+#define POS_W (21)//Writeback into base register bit
+#define POS_LS (20)//Load/Store bit
+
+#define POS_SWICODE (0)//Software interrupt code
+
+//Define mask amount size
+#define MASK_1BIT (0x1)
+#define MASK_2BIT (0x3)
+#define MASK_3BIT (0x7)
+#define MASK_4BIT (0xf)
+#define MASK_5BIT (0x1f)
+#define MASK_6BIT (0x3f)
+#define MASK_7BIT (0x7f)
+#define MASK_8BIT (0xff)
+#define MASK_24BIT (0xffffff)
+
+//Define each condition code.
+#define CC_EQ	(0x0)
+#define CC_NE	(0x1)
+#define CC_CS	(0x2)
+#define CC_CC	(0x3)
+#define CC_MI	(0x4)
+#define CC_PL	(0x5)
+#define CC_VS	(0x6)
+#define CC_VC	(0x7)
+#define CC_HI	(0x8)
+#define CC_LS	(0x9)
+#define CC_GE	(0xa)
+#define CC_LT	(0xb)
+#define CC_GT	(0xc)
+#define CC_LE	(0xd)
+#define CC_AL	(0xe)
+#define CC_NV	(0xf)
+
+// Define each instruction type code.
+#define IT_DP	(0x0)
+#define IT_DT	(0x1)
+#define IT_BR	(0x2)
+#define IT_SI	(0x3)
+
+// Define each status flag
+#define STAT_N	(1<<7)//Negative
+#define STAT_Z	(1<<6)//Zero
+#define STAT_C	(1<<5)//Carry
+#define STAT_V	(1<<4)//Overflow
+#define STAT_I	(1<<3)//Interrupt disabled
+#define STAT_F	(1<<2)//Fast interrupt disabled
+#define STAT_P	(3)//Processor operation mode, the last two bits. 00: User mode
+
+// Define each op code.
+#define OP_AND	(0x0)
+#define OP_EOR	(0x1)
+#define OP_SUB	(0x2)
+#define OP_RSB	(0x3)
+#define OP_ADD	(0x4)
+#define OP_ADC	(0x5)
+#define OP_SBC	(0x6)
+#define OP_RSC	(0x7)
+#define OP_TST	(0x8)
+#define OP_TEQ	(0x9)
+#define OP_CMP	(0xa)
+#define OP_CMN	(0xb)
+#define OP_ORR	(0xc)
+#define OP_MOV	(0xd)
+#define OP_BIC	(0xe)
+#define OP_MVN	(0xf)
+
+//custom SWI
+#define SYS_ADD10		(0x01)//Add 10 to R0
+
+#define SYS_POS_ADD10	(0x01)//Add 10 to R0
+
+//Define instruction handling result type, include further error types
+#define INST_VALID (1<<1)
+#define INST_CONDITIONNOTMET (1<<2)
+#define INST_INVALID (1<<3)
+#define INST_MULTIPLYBYZERO (1<<4)
+#define INST_RESTRICTEDMEMORYBLOCK (1<<5)
+
+int maxMemorySize = 4096;//Temporarily set the memory size to 140 to better monitor the data in memory during the output, increase this value as required.
+int userMemoryIndex = 120;//from 120 to maxMemorySize can be used by user to load/store data
+int stkMemoryIndex = 100;//next 20 are reserved for stack
+int instMemoryIndex = 52;//next 48 are reserved for user instructions. No access for user load/store data
+int swiMemoryIndex = 12;//next 40 are reserved for interrupt instructions. No access for user load/store data
+int swibMemoryIndex = 0;//First 12 rows are the interrupts branch instruction. No access for user load/store data
+
+//storing registers within array makes execution code simpler
+REGISTER registers[16];
+//4 kilobytes of RAM in this example (since 1 word = 4 bytes)
+WORD* memory = (WORD)0;
+//the variable to fetch the instruction into
+WORD inst;
+
+BYTE regStatus = 0;//status register
+
+int totalCycleCount = 0, instCycleCount = 0;
+
+BYTE instResult = INST_VALID;//Instruction result handler
+
+//Variables for data processing instructions
+BIT iBit = 0, sBit = 0, lBit = 0, pBit = 0, uBit = 0, bBit = 0, wBit = 0, lsBit = 0;
+BYTE opCode, regN, regDest, shiftAmount;
+WORD operand, offset, swiCode;
+
+//Turn on/off the debug mode; prints assisting data about the operation steps
+int debugEnabled = 1;
+
+//Turn on/off the instruction log; prints the type and input of the instruction
+int instructionLogEnabled = 1;
+
+//Listens to the keyboard input and is turned on if space is clicked. If it is on, an interrupt is fired
+int feedback = 0;
+
+//Get the negative value, use two's complement for negation
+WORD getNegative(WORD value){
+	return ~value + 1;
+}
+
+//Check if a specific value is negative, use two's complement for negation
+int isNegative(WORD value){
+	return (((value >> POS_N) & MASK_1BIT));
+}
+
+//Check if a specific value is positive
+int isPositive(WORD value){
+	return !(((value >> POS_N) & MASK_1BIT));
+}
+
+//Check if a specific 24 bit value is negative, use two's complement for negation. 24bit negative value is used for offset
+int isNegative24bit(WORD value){
+	return (((value >> (23)) & MASK_1BIT));
+}
+
+//Get the negative value, use two's complement for negation
+WORD getNegative24bit(WORD value){
+	return (~value & MASK_24BIT) + 1;
+}
+
+//The carry flag is set if the addition of two numbers causes a carry out of the most significant (leftmost) bits added.
+int isCarryAdd(WORD op1Value, WORD op2Value, WORD result)
+{
+	return ((isNegative(op1Value) && isNegative(op2Value)) || (isNegative(op1Value) && isPositive(result)) || (isNegative(op2Value) && isPositive(result)));
+}
+
+//The carry (borrow) flag is also set if the subtraction of two numbers requires a borrow into the most significant (leftmost) bits subtracted.
+int isCarrySub(WORD op1Value, WORD op2Value, WORD result){
+	return ((isNegative(op1Value) && isPositive(op2Value)) || (isNegative(op1Value) && isPositive(result)) || (isPositive(op2Value) && isPositive(result)));
+}
+
+//If the sum of two numbers with the sign bits off yields a result number with the sign bit on, the "overflow" flag is turned on.
+int isOverflowAdd(WORD op1Value, WORD op2Value, WORD result)
+{
+	return ((isNegative(op1Value) && isNegative(op2Value) && isPositive(result)) || (isPositive(op1Value) && isPositive(op2Value) && isNegative(result)));
+}
+
+//If the sum of two numbers with the sign bits on yields a result number with the sign bit off, the "overflow" flag is turned on.
+int isOverflowSub(WORD op1Value, WORD op2Value, WORD result){
+	return ((isNegative(op1Value) && isPositive(op2Value) && isPositive(result)) || (isPositive(op1Value) && isNegative(op2Value) && isNegative(result)));
+}
+
+//Provide some support functions to test condition of a specified SR flag
+int isSet(int flag)
+{
+	return (regStatus & flag) == flag;
+}
+
+int isClear(int flag)
+{
+	return ((~regStatus) & flag) == flag;
+}
+
+void setFlag(int flag)
+{
+	regStatus = regStatus | flag;
+}
+
+void clearFlag(int flag)
+{
+	regStatus = regStatus & (~flag);
+}
+
+//set the SR flags by examining the result. The previous value of flags get initiated as well.
+void setStatusReg(int isZ, int isN, int isC, int isV, int isI, int isF, int isP){
+	//Set or clear the Zero, Negative, Carry, Overflow, Interrupt disabled and Fast interrupt disabled flags
+	isN ? setFlag(STAT_N) : clearFlag(STAT_N);
+	isZ ? setFlag(STAT_Z) : clearFlag(STAT_Z);
+	isC ? setFlag(STAT_C) : clearFlag(STAT_C);
+	isV ? setFlag(STAT_V) : clearFlag(STAT_V);
+	isI ? setFlag(STAT_I) : clearFlag(STAT_I);
+	isF ? setFlag(STAT_F) : clearFlag(STAT_F);
+
+	//Check the processor operation mode and set the flags
+}
+
+// Write a function for each supported operation
+void doAnd(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: AND %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value & op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), 0, 0, 0, 0, 0);
+}
+
+void doOrr(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: ORR %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value | op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), 0, 0, 0, 0, 0);
+}
+
+void doEor(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: EOR %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value ^ op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), 0, 0, 0, 0, 0);
+}
+
+/*doAdd
+ * Adds op1Value to op2Value and stores in the specified register
+ *
+ * enter: 	regNumber - the number of the destination register (0-15)
+ * 			op1Value  - the first value to be added
+ * 			op2Value  -  the second value to be added
+ * 			setSR     - flag, if non-zero then the status register should be updated, else it shouldn't
+ */
+void doAdd(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: ADD %d %d\n", op1Value, op2Value);
+	WORD result = op1Value + op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarryAdd(op1Value, op2Value, result), isOverflowAdd(op1Value, op2Value, result), 0, 0, 0);
+}
+
+void doAdc(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: ADD %d %d\n", op1Value, op2Value);
+	WORD result = op1Value + op2Value + isSet(STAT_C);
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarryAdd(op1Value, op2Value, result), isOverflowAdd(op1Value, op2Value, result), 0, 0, 0);
+}
+
+void doSub(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: SUB %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value - op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarrySub(op1Value, op2Value, result), isOverflowSub(op1Value, op2Value, result), 0, 0, 0);
+}
+
+void doSbc(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: SUB %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value - op2Value - isClear(STAT_C);
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarrySub(op1Value, op2Value, result), isOverflowSub(op1Value, op2Value, result), 0, 0, 0);
+}
+
+void doRsb(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: RSB %d %d\n", op1Value, op2Value);
+
+	WORD result = op2Value - op1Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarrySub(op2Value, op1Value, result), isOverflowSub(op2Value, op1Value, result), 0, 0, 0);
+}
+
+void doRsc(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: RSB %d %d\n", op1Value, op2Value);
+
+	WORD result = op2Value - op1Value - isClear(STAT_C);
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), isCarrySub(op2Value, op1Value, result), isOverflowSub(op2Value, op1Value, result), 0, 0, 0);
+}
+
+void doMov(int regNumber, WORD opValue, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: MOV R%d %d\n", regNumber, opValue);
+
+	registers[regNumber] = opValue;
+
+	if (setSR) setStatusReg(opValue == 0, isNegative(opValue), 0, 0, 0, 0, 0);
+}
+
+void doMvn(int regNumber, WORD opValue, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: MVN R%d %d\n", regNumber, opValue);
+
+	registers[regNumber] = ~opValue;
+
+	if (setSR) setStatusReg(~opValue == 0, isNegative(~opValue), 0, 0, 0, 0, 0);
+}
+
+//The processor always assumes the status flag is set, either it is actually set or not
+void doCmp(WORD op1Value, WORD op2Value)
+{
+	if (instructionLogEnabled) printf("Operation: CMP %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value - op2Value;
+	setStatusReg(result == 0, isNegative(result), isCarrySub(op1Value, op2Value, result), isOverflowSub(op1Value, op2Value, result), 0, 0, 0);
+}
+
+//The processor always assumes the status flag is set, either it is actually set or not
+void doCmn(WORD op1Value, WORD op2Value)
+{
+	if (instructionLogEnabled) printf("Operation: CMN %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value + op2Value;
+
+	setStatusReg(result == 0, isNegative(result), isCarryAdd(op1Value, op2Value, result), isOverflowAdd(op1Value, op2Value, result), 0, 0, 0);
+}
+
+//The processor always assumes the status flag is set, either it is actually set or not
+void doTst(WORD op1Value, WORD op2Value)
+{
+	if (instructionLogEnabled) printf("Operation: TST %d %d\n", op1Value, op2Value);
+
+	setStatusReg((op1Value & op2Value) == 0, isNegative(op1Value & op2Value), 0, 0, 0, 0, 0);
+}
+
+//The processor always assumes the status flag is set, either it is actually set or not
+void doTeq(WORD op1Value, WORD op2Value)
+{
+	if (instructionLogEnabled) printf("Operation: TEQ %d %d\n", op1Value, op2Value);
+
+	setStatusReg((op1Value ^ op2Value) == 0, isNegative(op1Value ^ op2Value), 0, 0, 0, 0, 0);
+}
+
+void doBic(int regNumber, WORD op1Value, WORD op2Value, int setSR)
+{
+	if (instructionLogEnabled) printf("Operation: BIC %d %d\n", op1Value, op2Value);
+
+	WORD result = op1Value & ~op2Value;
+
+	registers[regNumber] = result;
+
+	if (setSR) setStatusReg(result == 0, isNegative(result), 0, 0, 0, 0, 0);
+}
+
+//Store a value of register regNumber into stack and increase the stack pointer
+void stkPush(int regNumber){
+	memory[registers[13]++] = registers[regNumber];
+}
+
+//Load a latest from stack into the register regNumber and decrease the stack pointer
+void stkPop(int regNumber){
+	registers[regNumber] = memory[registers[13]--];
+}
+
+//Decide whether the instruction should be executed by examining the appropriate status register flags, depending on condition code.
+int getConditionCode(WORD inst){
+	int exec = 0;
+	int conditionCode;
+	// Start by extracting the condition code
+	conditionCode = inst >> POS_CONDCODE;	// get the condition flags (top 4 bits of the instruction).
+
+	switch ( conditionCode ) {
+		case CC_EQ:
+			// check if zero flag is set
+			exec = isSet(STAT_Z);
+			break;
+		case CC_NE:
+			// check if zero flag is clear
+			exec = isClear(STAT_Z);
+			break;
+		case CC_CS:
+			exec = isSet(STAT_C);
+			break;
+		case CC_CC:
+			exec = isClear(STAT_C);
+			break;
+		case CC_MI:
+			exec = isSet(STAT_N);
+			break;
+		case CC_PL:
+			exec = isClear(STAT_N);
+			break;
+		case CC_VS:
+			exec = isSet(STAT_V);
+			break;
+		case CC_VC:
+			exec = isClear(STAT_V);
+			break;
+		case CC_HI:
+			//If C is set and Z is clear, means > for unsigned
+			exec = isSet(STAT_C) && isClear(STAT_Z);
+			break;
+		case CC_LS:
+			//<= unsigned
+			exec = isClear(STAT_C) && isSet(STAT_Z);
+			break;
+		case CC_GE:
+			//>= signed
+			exec = (isClear(STAT_N) && isClear(STAT_V)) || (isSet(STAT_N) && isSet(STAT_V));
+			break;
+		case CC_LT:
+			// < signed
+			exec = ( isSet( STAT_N ) && isClear( STAT_V ) ) || ( isClear(STAT_N) && isSet(STAT_V) ) ;
+			break;
+		case CC_GT:
+			// > signed
+			exec = isClear(STAT_Z) && ((isClear(STAT_N) && isClear(STAT_V)) || (isSet(STAT_N) && isSet(STAT_V)));
+			break;
+		case CC_LE:
+			// <= signed
+			exec = isSet(STAT_Z) || ( isSet( STAT_N ) && isClear( STAT_V ) ) || ( isClear(STAT_N) && isSet(STAT_V) ) ;
+			break;
+		case CC_AL:
+			exec = 1;
+			break;
+		case CC_NV:
+			exec = 0;
+			break;
+	}
+	return exec;
+}
+
+//Do the data processing type operations
+void doDataProcessing(WORD inst){
+	iBit = (inst >> POS_I) & MASK_1BIT;//Get Immediate bit
+	opCode = (inst >> POS_OPCODE) & MASK_4BIT;//Get Opcode, 4 bits
+	sBit = (inst >> POS_S) & MASK_1BIT;//Get Status bit
+	regN = (inst >> POS_REGN) & MASK_4BIT;//Get RegN, 4 bits
+	regDest = (inst >> POS_REGDEST) & MASK_4BIT;//Get RegDest, 4 bits
+
+	//Get the operand depending to the Immediate code
+	if(iBit){
+		shiftAmount = (inst >> POS_ISHIFT) & MASK_4BIT;//Immediate shift is 4 bits
+		operand = (inst >> POS_IOPERAND) & MASK_8BIT;//Immediate value is 8 bits
+	}
+	else{
+		shiftAmount = (inst >> POS_SHIFT) & MASK_8BIT;//Non-immediate shift is 8 bits
+		operand = registers[(inst >> POS_OPERAND) & MASK_4BIT];//Non-immediate register number is 4 bits
+	}
+
+	//Apply the shift amount to the operand
+	operand = operand << shiftAmount;
+
+	//Print the decoded instruction if debug is enabled
+	if (debugEnabled){
+		printf("Immediate bit: %01X\n", iBit);
+		printf("Op code: %01X\n", opCode);
+		printf("Status bit: %01X\n", sBit);
+		printf("RegN code: %01X\n", regN);
+		printf("RegDest code: %01X\n", regDest);
+		printf("operand : %d\n", operand);
+	}
+
+	switch(opCode)
+	{
+		case OP_AND:
+			doAnd(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_EOR:
+			doEor(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_SUB:
+			doSub(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_RSB:
+			doRsb(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_ADD:
+			doAdd(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_ADC:
+			doAdc(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_SBC:
+			doSbc(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_RSC:
+			doRsc(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_TST:
+			doTst(registers[regN], operand);
+			break;
+		case OP_TEQ:
+			doTeq(registers[regN], operand);
+			break;
+		case OP_CMP:
+			doCmp(registers[regN], operand);
+			break;
+		case OP_CMN:
+			doCmn(registers[regN], operand);
+			break;
+		case OP_ORR:
+			doOrr(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_MOV:
+			doMov(regDest, operand, sBit);
+			break;
+		case OP_BIC:
+			doBic(regDest, registers[regN], operand, sBit);
+			break;
+		case OP_MVN:
+			doMvn(regDest, operand, sBit);
+			break;
+		default:
+			instResult = INST_INVALID;
+			break;
+	}
+
+	//Update the cycle count. If regDest is PC the +2, otherwise 1 cycle.
+	instCycleCount = (regDest == 15) ? 3 : 1;
+}
+
+//Do the branch type operations
+void doBranch(WORD inst){
+	lBit = (inst >> POS_L) & MASK_1BIT;//Get Link bit
+	offset = (inst >> POS_BOFFSET) & MASK_24BIT;//Get the offset, 24 bits
+
+	if (instructionLogEnabled) printf("Operation: B %d\n", offset);
+
+	if(lBit){
+		//Check if there is already a link value in R14. Push to the stack if there is before overwriting it
+		if (registers[14] > 0) stkPush(14);
+
+		//Store the PC in link(R14)
+		registers[14] = registers[15];
+	}
+
+	//Check if the 24bit offset value is negative? if yes then subtract the positive value of the offset, otherwise add the offset value
+	if(isNegative24bit(offset)){
+		registers[15] -= getNegative24bit(offset) / 4;
+	}else{
+		registers[15] += offset / 4;
+	}
+
+	registers[15] += 4;//Add 4 to the PC, because of the pipeline
+
+	//Update the cycle count
+	instCycleCount = 3;
+}
+
+//Do the data transfer operation
+void doDataTransfer(WORD inst){
+
+	iBit = (inst >> POS_I) & MASK_1BIT;//Get Immediate bit
+	pBit = (inst >> POS_P) & MASK_1BIT;//Get Pre/Post bit
+	uBit = (inst >> POS_U) & MASK_1BIT;//Get Up/Down bit
+	bBit = (inst >> POS_B) & MASK_1BIT;//Get Byte/Word bit
+	wBit = (inst >> POS_W) & MASK_1BIT;//Get Writeback to base register bit
+	lsBit = (inst >> POS_LS) & MASK_1BIT;//Get Load/Store bit
+	regN = (inst >> POS_REGN) & MASK_4BIT;//Get RegN, 4 bits
+	regDest = (inst >> POS_REGDEST) & MASK_4BIT;//Get RegDest, 4 bits
+
+	//Get the operand depending to the Immediate code
+	if(iBit){
+		shiftAmount = (inst >> POS_ISHIFT) & MASK_4BIT;//Immediate shift is 4 bits
+		offset = (inst >> POS_IOPERAND) & MASK_8BIT;//Immediate value is 8 bits
+
+		if (debugEnabled) printf("Shift amount code: %01X\n", shiftAmount);
+	}
+	else{
+		shiftAmount = (inst >> POS_SHIFT) & MASK_8BIT;//Non-immediate shift is 8 bits
+		offset = registers[(inst >> POS_OPERAND) & MASK_4BIT];//Non-immediate register number is 4 bits
+
+		if (debugEnabled) printf("Shift amount code: %02X\n", shiftAmount);
+	}
+
+	if (instructionLogEnabled){
+		printf("Operation: ");
+		printf(lsBit ? "LDR" : "STR");
+		printf(" R%d R%d, %d\n", regDest, regN, offset);
+	}
+
+	//Print the decoded instruction if debug is enabled
+	if (debugEnabled){
+		printf("Immediate bit: %01X\n", iBit);
+		printf("Pre/Post bit: %01X\n", pBit);
+		printf("Up/Down bit: %01X\n", uBit);
+		printf("Byte/Word bit: %01X\n", bBit);
+		printf("Writeback to base register bit: %01X\n", wBit);
+		printf("Load/Store bit: %01X\n", lsBit);
+		printf("RegN code: %01X\n", regN);
+		printf("RegDest code: %01X\n", regDest);
+		printf("offset : %d\n", offset);
+	}
+
+	//Set the initial memory index
+	int memoryIndex = registers[regN];
+
+	//If the pre bit is set, add/subtract offset to the base register before the transfer
+	if(pBit) memoryIndex = (uBit) ? memoryIndex + offset :  memoryIndex - offset;
+
+	//Check if the instruction is trying to access the restricted memory blocks
+	if ((memoryIndex >= userMemoryIndex) && (memoryIndex <= maxMemorySize)){
+		//If load/store bit is set load, if not store
+		if(lsBit) registers[regDest] = (wBit) ? memory[memoryIndex] : memory[memoryIndex] & MASK_4BIT;//If the word/byte bit is set, load the least significant byte from the noted memory address
+		else memory[memoryIndex] = (wBit) ? registers[regDest] : registers[regDest] & MASK_4BIT;//If the word/byte bit is set, store the least significant byte from regDest
+
+		//If the pre bit is not set, add/subtract offset to the base register after the transfer
+		if(!pBit) memoryIndex = (uBit) ? memoryIndex + offset :  memoryIndex - offset;
+
+		//Set the base register value with the new index if the writeback is set
+		if(wBit) registers[regN] = memoryIndex;
+
+		//Update the cycle count. If it is LDR 3 cycles and +2 if regDest is PC. If it is STR then 2 cycles.
+		instCycleCount = (lsBit) ? (regDest == 15) ? 5 : 3 : 2;
+	}
+	else{
+		instResult = INST_RESTRICTEDMEMORYBLOCK;
+	}
+}
+
+//Handle the software interrupt
+void doSoftwareInterrupt(WORD inst){
+
+	swiCode = (inst >> POS_SWICODE) & MASK_24BIT;//Interrupt code value is 24 bits
+
+	if (instructionLogEnabled) printf("Interrup: SWI %d\n", swiCode);
+
+	registers[14] = registers[15];//Backup the PC from return from interrupt
+
+	registers[15] = swiCode + 4;//Jump to the branch address in vector table +4 for pipeline
+
+	//Update the cycle count
+	instCycleCount = 5;
+}
+
+// The main work will happen inside this function. It should decode then execute the passed instruction.
+void decodeAndExecute(WORD inst){
+	int insTypeCode;
+	int exec;
+
+	if (debugEnabled) printf("Decoding: %04X\n",inst);	// output the instruction being decoded
+
+	exec = getConditionCode(inst);
+
+	// only decode and execute the instruction if required to do so, i.e. condition satisfied.
+	if ( exec ) {
+
+		// next stage is to decode which type of instruction we have, so want to look at bits 27, 26
+		insTypeCode = (inst >> POS_INSTYPE) & MASK_2BIT;
+
+		if (debugEnabled) printf("Ins type code: %01X\n", insTypeCode);
+
+		// once we know the instruction we can execute it!
+		switch(insTypeCode){
+			case IT_DP:
+				doDataProcessing(inst);
+				break;
+			case IT_DT:
+				doDataTransfer(inst);
+				break;
+			case IT_BR:
+				doBranch(inst);
+				break;
+			case IT_SI:
+				doSoftwareInterrupt(inst);
+				break;
+			default:
+				instResult = INST_INVALID;
+				break;
+		}
+	}
+	else{
+		instResult = INST_CONDITIONNOTMET;
+	}
+}
+
+//Add delay and get feedback either to interrupt, exit or continue to next instruction
+void getFeedback(){
+	printf("Please enter (i)Interrupt, (x)Exit, (g)Continue: ");
+	feedback = getchar();
+	//Another getchar() to absorb the enter pressed after the value entered
+	getchar();
+
+	//if entered char = i(105) then set interrupt
+	if ((feedback == 105)){
+		//If hardware interrupt has happened, then execute the sample interrupt
+		doSoftwareInterrupt(0xEF000001);
+	}else if(feedback == 120){//if feedback is x(120)
+		memory[(registers[15] - 4)] = 0;//Set next instruction as 0, so the program will eixt
+	}
+}
+
+// Print the result of the registers, memory and the other required optputs
+void printOutput(){
+	if (instResult == INST_VALID){
+		//Print register values
+		printf("Registers\n");
+		int i;
+		for(i = 0; i<16; i++){
+			printf("-R%d: %d ", i, registers[i]);
+		}
+		printf("\n");
+
+		//Print only the user accessible memory values
+		printf("Memory\n");
+		for(i = userMemoryIndex; i < maxMemorySize; i++){
+			printf("-M[%d]: %d ", i, memory[i]);
+		}
+		printf("\n");
+
+		//Print the stack
+		printf("Stack\n");
+		for(i = stkMemoryIndex; i < userMemoryIndex; i++){
+			printf("-S[%d]: %d ", i, memory[i]);
+		}
+		printf("\n");
+
+		if (debugEnabled) printf("-Status Register: %X ", regStatus);//Print status register
+		//Print status flags
+		printf("Flags\n");
+		printf("-Negative: %d ", isSet(STAT_N));
+		printf("-Zero: %d ", isSet(STAT_Z));
+		printf("-Carry: %d ", isSet(STAT_C));
+		printf("-Overflow: %d ", isSet(STAT_V));
+		printf("-Interrupt disabled: %d ", isSet(STAT_I));
+		printf("-Fast interrupt disabled: %d ", isSet(STAT_F));
+		printf("-Processor operation mode: %d ", isSet(STAT_P));
+		printf("\n");
+
+	} else{
+		switch(instResult){
+			case INST_CONDITIONNOTMET:
+				printf("The condition is not met.\n");
+				break;
+			case INST_INVALID:
+				printf("The instruction is invalid.\n");
+				break;
+			case INST_MULTIPLYBYZERO:
+				printf("The instruction causes multiply by zero.\n");
+				break;
+			case INST_RESTRICTEDMEMORYBLOCK:
+				printf("Restricted memory block. End users have access to memory indexes greater then %d\n", (userMemoryIndex - 1) );
+				break;
+			default:
+				printf("Unexpected error happened.\n");
+				break;
+		}
+	}
+}
+
+int arm_emulate(uint64_t* binary) {
+  int isFinished = 0;
+	uint64_t* memoryIndex = (WORD)binary;//Initialise the memory index for the instructions block
+	int instCount = 0;
+  
+  int i = 0;
+	for(i = 0; i < 16; i++) {
+		registers[i] = 0;
+	}
+  registers[15] = binary+4;
+
+  printf("r15: %p\n",registers[15]);
+  printf("r15-4: %p\n",(WORD*)registers[15] - 4);
+
+  while(!isFinished)
+	{
+		//After each instruction is completed, get user feedback
+		getFeedback();
+
+		// fetch the next instruction. Subtract 4 from the PC, because of the pipeline PC points to 4 instructions forward
+    
+		inst = *((WORD*)registers[15] - 4) & 0xffffffff;
+
+		//increment the PC(register[15]) to point at the next instruction
+		registers[15]++;
+
+		//Initialise the instruction result values
+		instResult = INST_VALID;
+
+		//Initialise the instruction cycle count to 1, because it will take at least 1 cycle even if the condition is not met
+		instCycleCount = 1;
+
+		if ( inst != 0 ) {
+			printf("---------- Instruction %d ----------\n", instCount);
+			decodeAndExecute(inst);
+			printOutput();
+
+			//Update total cycle count
+			totalCycleCount += instCycleCount;
+
+			printf("---------- %d Cycles, end of instruction %d----------\n", instCycleCount, instCount);
+
+			//Increase the amount of instructions executed
+			instCount++;
+		}
+		else {
+			// found an instruction with the value 0
+			// finish once a 0 hit. Not correct behaviour but good for testing
+			isFinished = 1;
+
+			//Total instruction count doesn't include the finish instruction
+			printf("========== %d Total cycles for %d instructions ==========\n", totalCycleCount, instCount);
+			printf("Press enter to exit...\n");
+			getchar();
+		}
+	}
+	// all ok
+	return 0;
+}
+
+int arm_emu_main(void)
+{
+	int isFinished = 0;
+	int memoryIndex = instMemoryIndex;//Initialise the memory index for the instructions block
+	int instCount = 0;
+
+	//Technically the register values would be 0 anyway, yet this is a double check to make sure they are initialised
+	int i = 0;
+	for(i = 0; i < 16; i++){
+		registers[i] = 0;
+	}
+
+	//initialise the stack pointer to the initial index of stack memory
+	registers[13] = stkMemoryIndex;
+
+	//initialise the PC to start from the instruction memory index. Add 4 for pipeline
+	registers[15] = instMemoryIndex + 4;
+
+	/*Interrupt branch instructions*/
+	//B #28 		1110 1010 0000 0000 0000 0000 0001 1100 //branch to #13: Add 10 to R0. Jump to 11-4 next memory location, since PC is already showing the next instruction and another 4 because of pipeline
+	memory[swibMemoryIndex + SYS_ADD10] = 0xEA00001C;
+	//End Interrupt branch instructions
+
+	/*Interrupt instructions*/
+	//ADD R0,R0,#10 1110 0010 1000 0000 0000 0000 0000 1010 //Add 10 to R0
+	memory[swiMemoryIndex + SYS_POS_ADD10] = 0xE280000A;
+	//MOV R15,R14	1110 0001 1010 0000 1111 0000 0000 1110 //branch back to where interrupt was called
+	memory[swiMemoryIndex + SYS_POS_ADD10 + 1] = 0xE1A0F00E;
+	//End Interrupt instructions
+
+	//for testing purposes put some data into the memory. This data represents the instructions to be executed.
+
+	/*Math instructions
+	//MOV r0,#9    		1110 0011 1010 0000 0000 0000 0000 1001
+	memory[memoryIndex++] = 0xE3A00009;
+	//MOV r1,#8			1110 0011 1010 0000 0001 0000 0000 1000
+	memory[memoryIndex++] = 0xE3A01008;
+	//ADD r2,r0,r1		1110 0000 1000 0000 0010 0000 0000 0001
+	memory[memoryIndex++] = 0xE0802001;
+	//ADD r3,r0,#5		1110 0010 1000 0000 0011 0000 0000 0101
+	memory[memoryIndex++] = 0xE2803005;
+	//SUB r4,r2,#5		1110 0010 0100 0010 0100 0000 0000 0101
+	memory[memoryIndex++] = 0xE2424005;
+	//RSBS r5,r0,#5		1110 0010 0111 0000 0101 0000 0000 0101
+	memory[memoryIndex++] = 0xE2705005;
+	//ADDS r6,r0,#205	1110 0010 1001 0000 0110 0000 1100 1101
+	memory[memoryIndex++] = 0xE29060CD;
+	//BICS r7,r0,#1		1110 0011 1101 0000 0111 0000 0000 0001
+	memory[memoryIndex++] = 0xE3D07001;*/
+	//End Math instructions
+
+	/*Logic instructions
+	//MOVS r0,#9    	1110 0011 1011 0000 0000 0000 0000 1001
+	memory[memoryIndex++] = 0xE3B00009;
+	//MOVS r1,#12		1110 0011 1011 0000 0001 0000 0000 1100
+	memory[memoryIndex++] = 0xE3B0100C;
+	//MVNS r5,#2			1110 0011 1111 0000 0101 0000 0000 0010
+	//memory[memoryIndex++] = 0xE3F05002;
+	//AND r2,r0,r1		1110 0000 0000 0000 0010 0000 0000 0001
+	//memory[memoryIndex++] = 0xE0002001;
+	//ORR r3,r0,r1		1110 0001 1000 0000 0011 0000 0000 0001
+	//memory[memoryIndex++] = 0xE1803001;
+	//EOR r4,r0,r1		1110 0000 0010 0000 0100 0000 0000 0001
+	//memory[memoryIndex++] = 0xE0204001;
+	//CMP r2,#9			1110 0011 0101 0010 0000 0000 0000 1001
+	//memory[memoryIndex++] = 0xE3520009;
+	//CMN r5,#1			1110 0011 0111 0101 0000 0000 0000 0001
+	//memory[memoryIndex++] = 0xE3750001;
+	//TST r1,#0			1110 0011 0001 0001 0000 0000 0000 0000
+	memory[memoryIndex++] = 0xE3110000;
+	//TEQ r1,#12			1110 0011 0011 0001 0000 0000 0000 1100
+	memory[memoryIndex++] = 0xE331000C;
+	//End Logic instructions*/
+
+	/*Loop instructions*/
+	//MOV R4,#100 		1110 0011 1010 0000 0100 0000 0110 0100
+	memory[memoryIndex++] = 0xE3A04064;
+	//MOV R3,#0    		1110 0011 1010 0000 0011 0000 0000 0000
+	memory[memoryIndex++] = 0xE3A03000;
+	//SUB R4,R4,R3		1110 0000 0100 0100 0100 0000 0000 0011 //.strR4100
+	memory[memoryIndex++] = 0xE0444003;
+	//ADD R3,R3,#1		1110 0010 1000 0011 0011 0000 0000 0001
+	memory[memoryIndex++] = 0xE2833001;
+	//CMP R3,#100		1110 0011 0101 0011 0000 0000 0110 0100
+	memory[memoryIndex++] = 0xE3530064;
+	//BNE #-32			0001 1010 1111 1111 1111 1111 1110 0000 //return to .strR4100 if loop not completed. 4+4 instructions back, because of pipeline
+	memory[memoryIndex++] = 0x1AFFFFE0;
+	//End Loop instructions
+
+	/*Data transfer instructions
+	//MOV R0,#10 		1110 0011 1010 0000 0000 0000 0000 1010 //Counter for loop = 10
+	memory[memoryIndex++] = 0xE3A0000A;
+	//MOV R4,#100 		1110 0011 1010 0000 0100 0000 0110 0100
+	memory[memoryIndex++] = 0xE3A04064;
+	//MOV R3,#120    		1110 0011 1010 0000 0011 0000 0111 1000
+	memory[memoryIndex++] = 0xE3A03078;
+	//STR R4,R3,#1!   1110 0110 1110 0011 0100 0000 0000 0001 //Post bit set .strR4100
+	memory[memoryIndex++] = 0xE6E34001;
+	//SUBS R0,R0,#1		1110 0010 0101 0000 0000 0000 0000 0001 //Start loop counter
+	memory[memoryIndex++] = 0xE2500001;
+	//BNE #-28			0001 1010 1111 1111 1111 1111 1110 0100 //return to .strR4100 if loop not completed. 3+4 instructions back, because of pipeline
+	memory[memoryIndex++] = 0x1AFFFFE4;
+	//End Data transfer instructions*/
+
+	/*Software Interrupt instructions
+	//SWI #1			1110 1111 0000 0000 0000 0000 0000 0001 //SWI to Add 10 to R0
+	memory[memoryIndex++] = 0xEF000001;
+	//SUBS r0,r0,#10	1110 0010 0101 0000 0000 0000 0000 1010
+	memory[memoryIndex++] = 0xE250000A;
+	//End Software Interrupt instructions*/
+
+	/*Overflow and Carry instructions
+	//MOV r0,#9    						1110 0011 1010 0000 0000 0000 0000 1001
+	//memory[memoryIndex++] = 0xE3A00009;
+	//MOV r1,#255,LSL #15				1110 0011 1010 0000 0001 1111 1111 1111//r1 = 8355840 		00000000011111111000000000000000
+	memory[memoryIndex++] = 0xE3A01FFF;
+	//MOV r1,r1,LSL #8					1110 0001 1010 0000 0001 0000 1000 0001//r1 = 2139095040	01111111100000000000000000000000
+	memory[memoryIndex++] = 0xE1A01081;
+	//ADDS r2,r1,r1						1110 0000 1001 0001 0010 0000 0000 0001//r2 = 4278190080	11111111000000000000000000000000 //causes overflow
+	memory[memoryIndex++] = 0xE0912001;
+	//MOV r3,r1,LSL #1					1110 0001 1010 0000 0011 0000 0001 0001//r3 = 4278190080	11111111000000000000000000000000
+	memory[memoryIndex++] = 0xE1A03011;
+	//ADDS r4,r3,r1						1110 0000 1001 0011 0100 0000 0000 0001//r4 = 6417285120 (1)01111110100000000000000000000000 //causes carry
+	memory[memoryIndex++] = 0xE0934001;*/
+	//End Overflow and Carry instructions
+
+	//at the moment this will terminate the main loop (see comments below)
+	memory[memoryIndex++] = 0;
+
+	while(!isFinished)
+	{
+		//After each instruction is completed, get user feedback
+		getFeedback();
+
+		// fetch the next instruction. Subtract 4 from the PC, because of the pipeline PC points to 4 instructions forward
+		inst = memory[(registers[15] - 4)];
+
+		//increment the PC(register[15]) to point at the next instruction
+		registers[15]++;
+
+		//Initialise the instruction result values
+		instResult = INST_VALID;
+
+		//Initialise the instruction cycle count to 1, because it will take at least 1 cycle even if the condition is not met
+		instCycleCount = 1;
+
+		if ( inst != 0 ) {
+			printf("---------- Instruction %d ----------\n", instCount);
+			decodeAndExecute(inst);
+			printOutput();
+
+			//Update total cycle count
+			totalCycleCount += instCycleCount;
+
+			printf("---------- %d Cycles, end of instruction %d----------\n", instCycleCount, instCount);
+
+			//Increase the amount of instructions executed
+			instCount++;
+		}
+		else {
+			// found an instruction with the value 0
+			// finish once a 0 hit. Not correct behaviour but good for testing
+			isFinished = 1;
+
+			//Total instruction count doesn't include the finish instruction
+			printf("========== %d Total cycles for %d instructions ==========\n", totalCycleCount, instCount);
+			printf("Press enter to exit...\n");
+			getchar();
+		}
+	}
+	// all ok
+	return 0;
+}

bjos/sledge/blit.c

@@ -4,7 +4,6 @@
 #include "utf8.h"
 #include <stdio.h>
 #include <stdint.h>
-#include "../rpi2/rpi-boot/util.h"
 
 #define FAST_BLIT
 
@@ -32,14 +31,12 @@ int blit_vector32(int h, int w, int dy, int dx, Cell* bytes_c)
   return 0;
 }
 
-static uint32_t* FB;
-void init_blitter(uint32_t* fb) {
+static COLOR_TYPE* FB;
+void init_blitter(COLOR_TYPE* fb) {
   FB = fb;
 }
 
-#define T_PITCH 1920
-
-int blit_string1(uint32_t color, int h, int w, int y, int x, int cursor_pos, Cell* str_c, Cell* font) {
+int blit_string1(COLOR_TYPE color, int h, int w, int y, int x, int cursor_pos, Cell* str_c, Cell* font) {
   uint8_t* pixels = font->addr;
   uint8_t* str = str_c->addr;
 
@@ -86,13 +83,13 @@ int blit_string1(uint32_t color, int h, int w, int y, int x, int cursor_pos, Cel
 
 #ifdef FAST_BLIT
 
-int blit_vector1(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels)
+int blit_vector1(COLOR_TYPE color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels)
 {
   uint32_t s_offset = sy*pitch+sx;
-  uint32_t t_offset = dy*T_PITCH+dx;
+  uint32_t t_offset = dy*SCREEN_W+dx;
  
   for (unsigned int y=0; y<h; y++) {
-    register uint32_t* tfb = FB+t_offset;
+    register COLOR_TYPE* tfb = FB+t_offset;
     /*for (unsigned int x=0; x<w; x++) {
       register uint32_t px = pixels[s_offset+x];
       px |= (px<<8);
@@ -105,7 +102,7 @@ int blit_vector1(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, u
     register uint8_t* ptr = pixels+s_offset;
 
     for (unsigned int x=0; x<16; x++) {
-      register uint32_t px = *ptr - 1;
+      register COLOR_TYPE px = *ptr - 1;
       //px |= (px<<8);
       //px |= (px<<16);
       
@@ -115,23 +112,23 @@ int blit_vector1(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, u
     }
     
     s_offset += pitch;
-    t_offset += T_PITCH;
+    t_offset += SCREEN_W;
   }
   
   return 0;
 }
 
-int blit_vector1_invert(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels)
+int blit_vector1_invert(COLOR_TYPE color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels)
 {
   uint32_t s_offset = sy*pitch+sx;
-  uint32_t t_offset = dy*T_PITCH+dx;
+  uint32_t t_offset = dy*SCREEN_W+dx;
  
   for (unsigned int y=0; y<h; y++) {
-    register uint32_t* tfb = FB+t_offset;
+    register COLOR_TYPE* tfb = FB+t_offset;
     register uint8_t* ptr = pixels+s_offset;
 
     for (unsigned int x=0; x<16; x++) {
-      register uint32_t px = (1-*ptr) - 1;
+      register COLOR_TYPE px = (1-*ptr) - 1;
       //px |= (px<<8);
       //px |= (px<<16);
       
@@ -141,7 +138,7 @@ int blit_vector1_invert(uint32_t color, uint dy, uint dx, uint h, uint w, uint p
     }
     
     s_offset += pitch;
-    t_offset += T_PITCH;
+    t_offset += SCREEN_W;
   }
   
   return 0;

bjos/sledge/blit.h

@@ -1,16 +1,17 @@
 #ifndef BLIT_H
 #define BLIT_H
 #include <stdint.h>
+#include "machine.h"
 
 #define uint unsigned int
 
 int blit_vector32(int h, int w, int dy, int dx, Cell* bytes_c);
 //int blit_vector32(uint32_t* pixels, uint sx, uint sy, uint pitch, uint w, uint h, uint dx, uint dy);
 //int blit_vector1(void* pixels, uint sx, uint sy, uint pitch, uint w, uint h, uint dx, uint dy, uint color);
-int blit_vector1(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels);
-int blit_vector1_invert(uint32_t color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels);
-int blit_string1(uint32_t color, int h, int w, int y, int x, int cursor_pos, Cell* str_c, Cell* font);
+int blit_vector1(COLOR_TYPE color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels);
+int blit_vector1_invert(COLOR_TYPE color, uint dy, uint dx, uint h, uint w, uint pitch, uint sy, uint sx, uint8_t* pixels);
+int blit_string1(COLOR_TYPE color, int h, int w, int y, int x, int cursor_pos, Cell* str_c, Cell* font);
 
-void init_blitter(uint32_t* fb);
+void init_blitter(COLOR_TYPE* fb);
 
 #endif

bjos/sledge/build.sh

@@ -1,4 +1,4 @@
 
-gcc -g -o sledge --std=c99 -fsanitize=address -I ./lightning/include -L ./lightning/build/lib -I ./udis86/libudis86 sledge.c reader.c writer.c alloc.c blit.c sdl.c -llightning -lSDL2 -lm
+gcc -g -o sledge --std=gnu99 -fsanitize=address sledge.c reader.c writer.c alloc.c blit.c strmap.c -lm
 
 #  ./udis86/libudis86/decode.c ./udis86/libudis86/itab.c  ./udis86/libudis86/udis86.c 

bjos/sledge/compiler.c

@@ -81,8 +81,9 @@ typedef enum builtin_t {
   BUILTIN_SQRT
 } builtin_t;
 
+#define env_t StrMap
 
-static struct env_entry* global_env = NULL;
+static env_t* global_env = NULL;
 
 static Cell* coerce_int_cell; // recycled cell used to return coereced integers
 static Cell* error_cell; // recycled cell used to return errors
@@ -92,55 +93,62 @@ static size_t* jit_state_stack;
 int jit_state_stack_usage = 0;
 
 Cell* lookup_global_symbol(char* name) {
+  //HASH_FIND_STR(global_env, name, res);
   env_entry* res;
-  HASH_FIND_STR(global_env, name, res);
-  if (!res) return NULL;
+  int found = sm_get(global_env, name, (void**)&res);
+  if (!found) return NULL;
   return res->cell;
 }
 
-Cell* lookup_symbol(char* name, env_entry** env) {
+Cell* lookup_symbol(char* name, env_t** env) {
   env_entry* res;
-  HASH_FIND_STR(*env, name, res);
-  if (!res) return NULL;
+  //HASH_FIND_STR(*env, name, res);
+  int found = sm_get(*env, name, (void**)&res);
+  if (!found) return NULL;
   return res->cell;
 }
 
-env_entry* intern_symbol(Cell* symbol, env_entry** env) {
+env_entry* intern_symbol(Cell* symbol, env_t** env) {
   env_entry* e;
-  HASH_FIND_STR(*env, symbol->addr, e);
-  if (!e) {
+  //HASH_FIND_STR(*env, symbol->addr, e);
+  int found = sm_get(*env, symbol->addr, (void**)&e);
+  if (!found) {
     e = malloc(sizeof(env_entry));
     strcpy(e->name, (char*)symbol->addr);
     e->cell = NULL;
-    HASH_ADD_STR(*env, name, e);
+    //HASH_ADD_STR(*env, name, e);
+    sm_put(*env, e->name, &e);
   }
   //printf("intern: %s at %p cell %p\n",symbol->addr,e,e->cell);
   return e;
 }
 
-Cell* insert_symbol(Cell* symbol, Cell* cell, env_entry** env) {
+Cell* insert_symbol(Cell* symbol, Cell* cell, env_t** env) {
   env_entry* e;
-  HASH_FIND_STR(*env, symbol->addr, e);
-
-#ifdef DEBUG
-  if (cell) {
+  printf("sm_get %s\r\n",symbol->addr);
+  //HASH_FIND_STR(*env, symbol->addr, e);
+  int found = sm_get(*env, symbol->addr, (void**)&e);
+  
+  printf("sm_get res: %d\r\n",found);
+  
+  /*if (cell) {
     printf("insert_symbol %s <- %x\n",symbol->addr,cell->value);
   } else {
     printf("insert_symbol %s <- NULL\n",symbol->addr);
-  }
-#endif
+    }*/
 
-  if (e) {
+  if (found) {
     e->cell = cell;
     return e->cell;
   }
-  //printf("++ alloc env entry %s (%d), symbol size %d\r\n",symbol->addr,sizeof(env_entry),symbol->size);
+  printf("++ alloc env entry %s (%d), symbol size %d\r\n",symbol->addr,sizeof(env_entry),symbol->size);
     
   e = malloc(sizeof(env_entry));
   memcpy(e->name, (char*)symbol->addr, symbol->size);
   e->cell = cell;
 
-  HASH_ADD_STR(*env, name, e);
+  //HASH_ADD_STR(*env, name, e);
+  sm_put(*env, e->name, &e);
 
   return e->cell;
 }
@@ -529,9 +537,9 @@ int compile_print(int retreg, Cell* args, tag_t required) {
 
 Cell* make_symbol_list() {
   Cell* end = alloc_nil();
-  for (env_entry* e=global_env; e != NULL; e=e->hh.next) {
+  /*for (env_entry* e=global_env; e != NULL; e=e->hh.next) {
     end = alloc_cons(alloc_string_copy(e->name), end);
-  }
+    }*/
   return end;
 }
 
@@ -732,7 +740,7 @@ Cell* call_dynamic_lambda(Cell** lbd_and_args, int args_supplied) {
   return result;
 }
 
-int compile_dynamic_lambda(int retreg, int lbd_reg, Cell* args, tag_t requires, env_entry** env) {
+int compile_dynamic_lambda(int retreg, int lbd_reg, Cell* args, tag_t requires, env_t** env) {
   // apply a function whose parameters we only learn at runtime
 
   // push the actual lambda to call
@@ -768,7 +776,7 @@ int compile_dynamic_lambda(int retreg, int lbd_reg, Cell* args, tag_t requires,
 }
 
 // compile application of a compiled function
-int compile_lambda(int retreg, Cell* lbd, Cell* args, tag_t requires, env_entry** env, int recursion) {
+int compile_lambda(int retreg, Cell* lbd, Cell* args, tag_t requires, env_t** env, int recursion) {
   jit_node_t* ret_label = jit_note(__FILE__, __LINE__);
 
   //printf("<lambda: %p>\n",lbd->next);
@@ -1520,8 +1528,12 @@ void init_compiler() {
   //memdump(0x6f460,0x200,0);
   //uart_getc();
   
-  printf("malloc test: %p\r\n",malloc(1024));
-  
+  //printf("malloc test: %p\r\n",malloc(1024));
+
+  printf("[compiler] creating global env hash table…\r\n");
+  global_env = sm_new(1000);
+
+  printf("[compiler] init_allocator…\r\n");
   init_allocator();
 
   int_cell_regs = (Cell*)malloc(10*sizeof(Cell));
@@ -1533,6 +1545,8 @@ void init_compiler() {
   jit_state_stack = (void*)malloc(3*50*sizeof(void*));
   
   error_cell = alloc_error(0);
+
+  printf("[compiler] inserting symbols…\r\n");
   
   insert_symbol(alloc_sym("+"), alloc_builtin(BUILTIN_ADD), &global_env);
   insert_symbol(alloc_sym("-"), alloc_builtin(BUILTIN_SUB), &global_env);
@@ -1540,9 +1554,13 @@ void init_compiler() {
   insert_symbol(alloc_sym("/"), alloc_builtin(BUILTIN_DIV), &global_env);
   insert_symbol(alloc_sym("%"), alloc_builtin(BUILTIN_MOD), &global_env);
   
+  printf("[compiler] arithmetic…\r\n");
+  
   insert_symbol(alloc_sym("lt"), alloc_builtin(BUILTIN_LT), &global_env);
   insert_symbol(alloc_sym("gt"), alloc_builtin(BUILTIN_GT), &global_env);
   
+  printf("[compiler] compare…\r\n");
+  
   insert_symbol(alloc_sym("if"), alloc_builtin(BUILTIN_IF), &global_env);
   insert_symbol(alloc_sym("while"), alloc_builtin(BUILTIN_WHILE), &global_env);
   insert_symbol(alloc_sym("def"), alloc_builtin(BUILTIN_DEF), &global_env);
@@ -1550,6 +1568,8 @@ void init_compiler() {
   insert_symbol(alloc_sym("do"), alloc_builtin(BUILTIN_DO), &global_env);
   insert_symbol(alloc_sym("fn"), alloc_builtin(BUILTIN_FN), &global_env);
   
+  printf("[compiler] flow…\r\n");
+  
   insert_symbol(alloc_sym("quote"), alloc_builtin(BUILTIN_QUOTE), &global_env);
   insert_symbol(alloc_sym("car"), alloc_builtin(BUILTIN_CAR), &global_env);
   insert_symbol(alloc_sym("cdr"), alloc_builtin(BUILTIN_CDR), &global_env);
@@ -1557,11 +1577,15 @@ void init_compiler() {
   insert_symbol(alloc_sym("list"), alloc_builtin(BUILTIN_LIST), &global_env);
   insert_symbol(alloc_sym("map"), alloc_builtin(BUILTIN_MAP), &global_env);
 
+  printf("[compiler] lists…\r\n");
+  
   insert_symbol(alloc_sym("concat"), alloc_builtin(BUILTIN_CONCAT), &global_env);
   insert_symbol(alloc_sym("substr"), alloc_builtin(BUILTIN_SUBSTR), &global_env);
   insert_symbol(alloc_sym("alloc"), alloc_builtin(BUILTIN_ALLOC), &global_env);
   insert_symbol(alloc_sym("alloc-str"), alloc_builtin(BUILTIN_ALLOC_STR), &global_env);
 
+  printf("[compiler] strings…\r\n");
+  
   insert_symbol(alloc_sym("get"), alloc_builtin(BUILTIN_GET), &global_env);
   insert_symbol(alloc_sym("uget"), alloc_builtin(BUILTIN_UGET), &global_env);
   insert_symbol(alloc_sym("put"), alloc_builtin(BUILTIN_PUT), &global_env);
@@ -1569,9 +1593,13 @@ void init_compiler() {
   insert_symbol(alloc_sym("size"), alloc_builtin(BUILTIN_SIZE), &global_env);
   insert_symbol(alloc_sym("usize"), alloc_builtin(BUILTIN_USIZE), &global_env);
 
+  printf("[compiler] get/put…\r\n");
+  
   insert_symbol(alloc_sym("write"), alloc_builtin(BUILTIN_WRITE), &global_env);
   insert_symbol(alloc_sym("eval"), alloc_builtin(BUILTIN_EVAL), &global_env);
   
+  printf("[compiler] write/eval…\r\n");
+  
   insert_symbol(alloc_sym("pixel"), alloc_builtin(BUILTIN_PIXEL), &global_env);
   insert_symbol(alloc_sym("rectfill"), alloc_builtin(BUILTIN_RECTFILL), &global_env);
   insert_symbol(alloc_sym("flip"), alloc_builtin(BUILTIN_FLIP), &global_env);
@@ -1581,22 +1609,33 @@ void init_compiler() {
   insert_symbol(alloc_sym("blit-string"), alloc_builtin(BUILTIN_BLIT_STRING), &global_env);
   insert_symbol(alloc_sym("inkey"), alloc_builtin(BUILTIN_INKEY), &global_env);
   
+  printf("[compiler] graphics…\r\n");
+  
   insert_symbol(alloc_sym("gc"), alloc_builtin(BUILTIN_GC), &global_env);
   insert_symbol(alloc_sym("symbols"), alloc_builtin(BUILTIN_SYMBOLS), &global_env);
   insert_symbol(alloc_sym("load"), alloc_builtin(BUILTIN_LOAD), &global_env);
   insert_symbol(alloc_sym("save"), alloc_builtin(BUILTIN_SAVE), &global_env);
   
+  printf("[compiler] gc/load/save…\r\n");
+  
   insert_symbol(alloc_sym("udp-poll"), alloc_builtin(BUILTIN_UDP_POLL), &global_env);
   insert_symbol(alloc_sym("udp-send"), alloc_builtin(BUILTIN_UDP_SEND), &global_env);
 
+  printf("[compiler] udp…\r\n");
+  
   insert_symbol(alloc_sym("tcp-bind"), alloc_builtin(BUILTIN_TCP_BIND), &global_env);
   insert_symbol(alloc_sym("tcp-connect"), alloc_builtin(BUILTIN_TCP_CONNECT), &global_env);
   insert_symbol(alloc_sym("tcp-send"), alloc_builtin(BUILTIN_TCP_SEND), &global_env);
 
+  printf("[compiler] tcp…\r\n");
+  
   insert_symbol(alloc_sym("sin"), alloc_builtin(BUILTIN_SIN), &global_env);
   insert_symbol(alloc_sym("cos"), alloc_builtin(BUILTIN_COS), &global_env);
   insert_symbol(alloc_sym("sqrt"), alloc_builtin(BUILTIN_SQRT), &global_env);
 
-  int num_syms=HASH_COUNT(global_env);
+  printf("[compiler] math.\r\n");
+  
+  //int num_syms=HASH_COUNT(global_env);
+  int num_syms = sm_get_count(global_env);
   printf("sledge knows %u symbols. enter (symbols) to see them.\r\n", num_syms);
 }

bjos/sledge/compiler_new.c

@@ -0,0 +1,761 @@
+#include "minilisp.h"
+#include "reader.h"
+#include "writer.h"
+#include "alloc.h"
+#include "machine.h"
+#include "compiler_new.h"
+#include "utf8.c"
+
+#define env_t StrMap
+static env_t* global_env = NULL;
+
+env_entry* lookup_global_symbol(char* name) {
+  env_entry* res;
+  int found = sm_get(global_env, name, (void**)&res);
+  //printf("[lookup] %s res: %p\n",name,res);
+  if (!found) return NULL;
+  return res;
+}
+
+Cell* insert_symbol(Cell* symbol, Cell* cell, env_t** env) {
+  env_entry* e;
+  //HASH_FIND_STR(*env, symbol->addr, e);
+  int found = sm_get(*env, symbol->addr, (void**)&e);
+  
+  //printf("sm_get res: %d\r\n",found);
+  
+  if (found) {
+    e->cell = cell;
+    //printf("[insert_symbol] update %s entry at %p (cell: %p value: %d)\r\n",symbol->addr,e,e->cell,e->cell->value);
+    return e->cell;
+  }
+  //printf("++ alloc env entry %s (%d), symbol size %d\r\n",symbol->addr,sizeof(env_entry),symbol->size);
+    
+  e = malloc(sizeof(env_entry));
+  memcpy(e->name, (char*)symbol->addr, symbol->size);
+  e->cell = cell;
+
+  //HASH_ADD_STR(*env, name, e);
+  printf("[insert_symbol] %s entry at %p (cell: %p)\r\n",symbol->addr,e,e->cell);
+  sm_put(*env, e->name, e);
+
+  return e->cell;
+}
+
+Cell* insert_global_symbol(Cell* symbol, Cell* cell) {
+  return insert_symbol(symbol, cell, &global_env);
+}
+
+enum jit_reg {
+  R0 = 0,
+  R1,
+  R2,
+  R3,
+  R4,
+  R5,
+  R6
+};
+
+static FILE* jit_out;
+static Cell* cell_heap_start;
+static int label_skip_count = 0;
+static char temp_print_buffer[1024];
+static Cell* consed_type_error;
+
+#define CPU_X64
+
+#ifdef CPU_ARM
+#include "jit_arm.c"
+#endif
+
+#ifdef CPU_X64
+#include "jit_x64.c"
+#endif
+
+typedef enum arg_t {
+  ARGT_CONST,
+  ARGT_CELL,
+  ARGT_ENV,
+  ARGT_LAMBDA,
+  ARGT_REG
+} arg_t;
+
+typedef struct Arg {
+  arg_t type;
+  Cell* cell;
+  env_entry* env;
+  int slot;
+  char* name;
+} Arg;
+
+Cell* lisp_print(Cell* arg) {
+  lisp_write(arg, temp_print_buffer, sizeof(temp_print_buffer)-1);
+  printf("%s\r\n",temp_print_buffer);
+  return arg;
+}
+
+void load_int(int dreg, Arg arg) {
+  if (arg.type == ARGT_CONST) {
+    jit_movi(dreg, (void*)arg.cell->value);
+  }
+  else if (arg.type == ARGT_CELL) {
+    if (arg.cell == NULL) {
+      //jit_movr(dreg, R0);
+      jit_ldr(dreg);
+    } else {
+      jit_lea(dreg, arg.cell);
+      jit_ldr(dreg);
+    }
+  }
+  else if (arg.type == ARGT_ENV) {
+    jit_lea(dreg, arg.env);
+    jit_ldr(dreg);
+    jit_ldr(dreg);
+  }
+  else if (arg.type == ARGT_REG) {
+    jit_movr(dreg, R3+arg.slot);
+    jit_ldr(dreg);
+  }
+  else {
+    jit_movi(dreg, (void*)0xdeadbeef);
+  }
+}
+
+void load_cell(int dreg, Arg arg) {
+  if (arg.type == ARGT_CELL || arg.type == ARGT_CONST) {
+    if (arg.cell == NULL) {
+      jit_movr(dreg, R0);
+    } else {
+      jit_lea(dreg, arg.cell);
+    }
+  }
+  else if (arg.type == ARGT_ENV) {
+    jit_lea(dreg, arg.env);
+    jit_ldr(dreg);
+  }
+  else if (arg.type == ARGT_REG) {
+    jit_movr(dreg, R3+arg.slot);
+  }
+  else {
+    jit_movi(dreg, (void*)0xdeadcafe);
+  }
+}
+
+#define MAXARGS 4
+
+int get_sym_arg_slot(char* argname, Arg* fn_frame) {
+  if (!fn_frame) return 0;
+  
+  for (int i=0; i<MAXARGS; i++) {
+    printf("fn_frame %d: %p\n",i,fn_frame[i]);
+    printf("get_sym_arg_slot %i: %p %s\n",i,fn_frame[i].name,fn_frame[i].name);
+    if (fn_frame[i].name) {
+      if (!strcmp(argname, fn_frame[i].name)) {
+        return i+1;
+      }
+    }
+  }
+  return 0;
+}
+
+int compile_expr(Cell* expr, Arg* fn_frame) {
+
+  if (expr->tag != TAG_CONS) {
+    if (expr->tag == TAG_SYM) {
+      env_entry* env = lookup_global_symbol(expr->addr);
+      if (env) {
+        Cell* value = env->cell;
+        jit_movi(R0,value);
+      } else {
+        printf("undefined symbol %s\n",expr->addr);
+        jit_movi(R0,0);
+        return 0;
+      }
+    } else {
+      // return the expr
+      jit_movi(R0,expr);
+    }
+    return 0;
+  }
+
+  cell_heap_start = get_cell_heap();
+  
+  Cell* opsym = car(expr);
+  Cell* args = cdr(expr);
+  Cell* orig_args = args; // keep around for specials forms like DO
+  Cell* signature_args = NULL;
+
+  char debug_buf[256];
+
+  //printf("opsym tag: %d\n",opsym->tag);
+
+  if (!opsym || opsym->tag != TAG_SYM) {
+    printf("[compile_expr] error: non-symbol in operator position.\n");
+    return 0;
+  }
+
+  env_entry* op_env = lookup_global_symbol(opsym->addr);
+
+  if (!op_env || !op_env->cell) {
+    printf("[compile_expr] error: undefined symbol %s in operator position.\n",opsym->addr);
+    return 0;
+  }
+  Cell* op = op_env->cell;
+  
+  //printf("op tag: %d\n",op->tag);
+  if (op->tag == TAG_BUILTIN) {
+    signature_args = op->next;
+  } else if (op->tag == TAG_LAMBDA) {
+    signature_args = op->addr;
+  }
+  
+  //lisp_write(op, debug_buf, sizeof(debug_buf));
+  //printf("[op] %s\n",debug_buf);
+  //lisp_write(signature_args, debug_buf, sizeof(debug_buf));
+  //printf("[sig] %s\n",debug_buf);
+  
+  // first, we need a signature
+
+  int argi = 0;
+  Arg argdefs[MAXARGS];
+
+  do {
+    Cell* arg = car(args);
+    Cell* signature_arg = car(signature_args);
+    char arg_name[32];
+    snprintf(arg_name,sizeof(arg_name),"a%d",argi+1,arg_name,10);
+    // 1. is the arg the required type? i.e. a pointer or a number?
+
+    if (signature_arg && signature_arg->tag == TAG_CONS) {
+      // named argument
+      snprintf(arg_name,sizeof(arg_name),car(signature_arg)->addr);
+      signature_arg = cdr(signature_arg);
+    }
+
+    if (arg && (!signature_args || signature_arg)) {
+
+      int given_tag = arg->tag;
+
+      if (!signature_args) {
+        // any number of arguments allowed
+        argdefs[argi].cell = arg;
+        argdefs[argi].type = ARGT_CELL;
+      }
+      else if (arg->tag == TAG_CONS) {
+        if (signature_arg->value == TAG_LAMBDA) {
+          // lazy evaluation by form
+          argdefs[argi].cell = arg;
+          argdefs[argi].type = ARGT_LAMBDA;
+        } else {
+          // eager evaluation
+          // nested expression
+          if (argi>0) {
+            // save registers
+            jit_push(R1,R1+argi-1);
+          }
+          given_tag = compile_expr(arg, fn_frame);
+          argdefs[argi].cell = NULL; // cell is in R0 at runtime
+          argdefs[argi].type = ARGT_CELL;
+          jit_movr(argi+R1,R0);
+        
+          if (argi>0) {
+            jit_pop(R1,R1+argi-1);
+          }
+        }
+      }
+      else if (given_tag == TAG_SYM && signature_arg->value != TAG_SYM) {
+        // symbol given, lookup (indirect)
+        //printf("indirect symbol lookup (name: %p)\n",arg->value);
+
+        int arg_slot = get_sym_arg_slot(arg->addr, fn_frame);
+
+        // argument passed to function in register
+        if (arg_slot) {
+          argdefs[argi].slot = arg_slot-1;
+          argdefs[argi].type = ARGT_REG;
+
+          printf("argument %s from register slot %d\n",arg_name, arg_slot-1);
+        } else {
+          argdefs[argi].env = lookup_global_symbol((char*)arg->addr);
+          argdefs[argi].type = ARGT_ENV;
+        }
+        //printf("lookup result: %p\n",argptrs[argi]);
+
+        if (!argdefs[argi].env && !arg_slot) {
+          printf("undefined symbol given for argument %s!\n",arg_name);
+          return 0;
+        }
+      }
+      else if (given_tag == signature_arg->value || signature_arg->value==TAG_ANY) {
+        argdefs[argi].cell = arg;
+        argdefs[argi].type = ARGT_CELL;
+
+        if (given_tag == TAG_INT || given_tag == TAG_STR || given_tag == TAG_BYTES) {
+          argdefs[argi].type = ARGT_CONST;
+        }
+      } else {
+        // check if we can typecast
+        // else, fail with type error
+
+        printf("type mismatch for argument %s (given %d, expected %d)!\n",arg_name,given_tag,signature_arg->value);
+        return 0;
+      }
+    } else {
+      if (!arg && signature_arg) {
+        // missing arguments
+        printf("argument %s missing!\n",arg_name);
+        return 0;
+      } else if (arg && !signature_arg) {
+        // surplus arguments
+        printf("surplus arguments!\n");
+        return 0;
+      }
+    }
+    
+    argi++;
+  } while (argi<MAXARGS && (args = cdr(args)) && (!signature_args || (signature_args = cdr(signature_args))));
+
+  if (op->tag == TAG_BUILTIN) {
+    switch (op->value) {
+    case BUILTIN_ADD: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_addr(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_SUB: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_subr(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_MUL: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_mulr(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_DIV: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_divr(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_GT: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_subr(R2,R1);
+      jit_movi(R1,(void*)0);
+      jit_movi(R2,(void*)1);
+      jit_movneg(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_LT: {
+      load_int(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      jit_subr(R1,R2);
+      jit_movi(R1,(void*)0);
+      jit_movi(R2,(void*)1);
+      jit_movneg(R1,R2);
+      jit_call(alloc_int, "alloc_int");
+      return TAG_INT;
+    }
+    case BUILTIN_DEF: {
+      jit_lea(R1,argdefs[0].cell);
+      if (argdefs[1].type == ARGT_CONST) {
+        jit_lea(R2,argdefs[1].cell); // load cell
+      } else if (argdefs[1].type == ARGT_CELL) {
+        jit_movr(R2,R0);
+      } else if (argdefs[1].type == ARGT_ENV) {
+        jit_lea(R2,argdefs[1].env);
+        jit_ldr(R2); // load cell
+      }
+      jit_call(insert_global_symbol, "insert_global_symbol");
+      break;
+    }
+    case BUILTIN_FN: {
+      if (argi<2) {
+        printf("error: trying to define fn without body.\n");
+        return 0;
+      }
+      
+      // scan args (build signature)
+      Cell* fn_args = alloc_nil();
+      Arg fn_new_frame[MAXARGS];
+      for (int i=0; i<MAXARGS; i++) {
+        fn_new_frame[i].type = 0;
+        fn_new_frame[i].slot = -1;
+        fn_new_frame[i].name = NULL;
+      }
+
+      int slotc = 0;
+      for (int j=argi-3; j>=0; j--) {
+        printf("fn arg %d\n",j);
+        Cell* arg = alloc_cons(alloc_sym(argdefs[j].cell->addr),alloc_int(TAG_ANY));
+        fn_args = alloc_cons(arg,fn_args);
+        
+        fn_new_frame[j].type = ARGT_REG;
+        fn_new_frame[j].slot = j;
+        fn_new_frame[j].name = argdefs[j].cell->addr;
+      }
+      char sig_debug[128];
+      lisp_write(fn_args, sig_debug, sizeof(sig_debug));
+      printf("signature: %s\n",sig_debug);
+
+      // body
+      Cell* fn_body = argdefs[argi-2].cell;
+
+      Cell* lambda = alloc_lambda(fn_args);
+      lambda->next = 0;
+
+
+      char label_fn[64];
+      char label_fe[64];
+      sprintf(label_fn,"f0_%p",lambda);
+      sprintf(label_fe,"f1_%p",lambda);
+      
+      jit_jmp(label_fe);
+      jit_label(label_fn);
+      compile_expr(fn_body, fn_new_frame);
+      jit_ret();
+      jit_label(label_fe);
+      jit_lea(R0,lambda);
+      
+      break;
+    }
+    case BUILTIN_IF: {
+      // load the condition
+      load_int(R1,argdefs[0]);
+
+      char label_skip[64];
+      sprintf(label_skip,"else_%d",++label_skip_count);
+      
+      // compare to zero
+      jit_cmpi(R1,0);
+      jit_je(label_skip);
+
+      compile_expr(argdefs[1].cell, fn_frame);
+
+      // else?
+      if (argdefs[2].cell) {
+        char label_end[64];
+        sprintf(label_end,"endif_%d",label_skip_count);
+        jit_jmp(label_end);
+        
+        jit_label(label_skip);
+        compile_expr(argdefs[2].cell, fn_frame);
+        jit_label(label_end);
+      } else {
+        jit_label(label_skip);
+      }
+      
+      break;
+    }
+    case BUILTIN_WHILE: {
+      // load the condition
+      char label_loop[64];
+      sprintf(label_loop,"loop_%d",++label_skip_count);
+      char label_skip[64];
+      sprintf(label_skip,"skip_%d",label_skip_count);
+      
+      jit_label(label_loop);
+      
+      compile_expr(argdefs[0].cell, fn_frame);
+      jit_ldr(R0);
+      //load_int(R1,argdefs[0]);
+      // compare to zero
+      jit_cmpi(R0,0);
+      jit_je(label_skip);
+
+      compile_expr(argdefs[1].cell, fn_frame);
+
+      jit_jmp(label_loop);
+      jit_label(label_skip);
+      
+      break;
+    }
+    case BUILTIN_DO: {
+      args = orig_args;
+      Cell* arg;
+      while ((arg = car(args))) {
+        compile_expr(arg, fn_frame);
+        args = cdr(args);
+      }
+      break;
+    }
+    case BUILTIN_QUOTE: {
+      args = orig_args;
+      Cell* arg = car(args);
+      jit_lea(R0,arg);
+      break;
+    }
+    case BUILTIN_CAR: {
+      load_cell(R0,argdefs[0]);
+      
+      // type check -------------------
+      jit_movr(R1,R0);
+      jit_addi(R1,16);
+      jit_ldr(R1);
+      jit_lea(R2,consed_type_error);
+      jit_cmpi(R1,TAG_CONS);
+      jit_movne(R0,R2);
+      // ------------------------------
+      
+      jit_ldr(R0);
+      break;
+    }
+    case BUILTIN_CDR: {
+      load_cell(R0,argdefs[0]);
+      jit_addi(R0,8); // TODO depends on machine word size
+
+      // type check -------------------
+      jit_movr(R1,R0);
+      jit_addi(R1,8);
+      jit_ldr(R1);
+      jit_lea(R2,consed_type_error);
+      jit_cmpi(R1,TAG_CONS);
+      jit_movne(R0,R2);
+      // ------------------------------
+
+      jit_ldr(R0);
+      break;
+    }
+    case BUILTIN_CONS: {
+      load_cell(R1,argdefs[0]);
+      load_cell(R2,argdefs[1]);
+      jit_call(alloc_cons,"alloc_cons");
+      break;
+    }
+    case BUILTIN_CONCAT: {
+      load_cell(R1,argdefs[0]);
+      load_cell(R2,argdefs[1]);
+      jit_call(alloc_concat,"alloc_concat");
+      break;
+    }
+    case BUILTIN_SUBSTR: {
+      load_cell(R1,argdefs[0]);
+      load_int(R2,argdefs[1]);
+      load_int(R3,argdefs[2]);
+      jit_call(alloc_substr,"alloc_substr");
+      break;
+    }
+    case BUILTIN_GET: {
+      char label_skip[64];
+      sprintf(label_skip,"skip_%d",++label_skip_count);
+
+      jit_movi(R1,(void*)0);    
+      load_cell(R3,argdefs[0]);
+      load_int(R2,argdefs[1]); // offset -> R2
+      jit_cmpi(R2,0);
+      jit_jneg(label_skip); // negative offset?
+
+      jit_movr(R0,R3);
+      jit_addi(R0,8); // fetch size -> R0
+      jit_ldr(R0);
+
+      jit_subr(R0,R2);
+      jit_jneg(label_skip); // overflow? (R2>R0)
+      jit_je(label_skip); // overflow? (R2==R0)
+
+      jit_movr(R1,R2);
+      jit_ldr(R3); // string address
+      jit_addr(R1,R3);
+      jit_ldrb(R1);
+
+      jit_label(label_skip);
+      
+      jit_call(alloc_int,"alloc_int");
+      break;
+    }
+    case BUILTIN_PUT: {
+      char label_skip[64];
+      //char label_noskip[64];
+      sprintf(label_skip,"skip_%d",++label_skip_count);
+      //sprintf(label_noskip,"noskip_%d",label_skip_count);
+    
+      load_cell(R1,argdefs[0]);
+      jit_movr(R4,R1);
+      load_int(R2,argdefs[1]); // offset -> R2
+      jit_cmpi(R2,0);
+      jit_jneg(label_skip); // negative offset?
+      load_int(R3,argdefs[2]); // byte to store -> R3
+
+      jit_movr(R0,R1);
+      jit_addi(R0,8); // fetch size -> R0
+      jit_ldr(R0);
+
+      jit_subr(R0,R2);
+      jit_jneg(label_skip); // overflow? (R2>R0)
+      jit_je(label_skip); // overflow? (R2==R0)
+
+      jit_ldr(R1); // string address
+      jit_addr(R1,R2);
+      jit_strb(R1); // strb is always from R3
+      
+      //jit_jmp(label_noskip);
+      
+      jit_label(label_skip);
+      jit_movr(R0,R4);
+      //jit_lea(R0,alloc_error(ERR_OUT_OF_BOUNDS));
+      //jit_label(label_noskip);
+      
+      break;
+    }
+    case BUILTIN_ALLOC: {
+      load_int(R1,argdefs[0]);
+      jit_call(alloc_num_bytes,"alloc_bytes");
+      break;
+    }
+    case BUILTIN_ALLOC_STR: {
+      load_int(R1,argdefs[0]);
+      jit_call(alloc_num_string,"alloc_string");
+      break;
+    }
+    case BUILTIN_SIZE: {
+      load_cell(R1,argdefs[0]);
+      jit_addi(R1,8); // fetch size -> R0
+      jit_ldr(R1);
+      jit_call(alloc_int,"alloc_int");
+      
+      break;
+    }
+    case BUILTIN_GC: {
+      jit_lea(R1,global_env);
+      jit_call(collect_garbage,"collect_garbage");
+      break;
+    }
+    case BUILTIN_PRINT: {
+      load_cell(R1,argdefs[0]);
+      jit_call(lisp_print,"lisp_print");
+      break;
+    }
+    }
+  } else {
+    // lambda call
+    //printf("-> would jump to lambda at %p\n",op->next);
+    for (int j=0; j<argi-1; j++) {
+      load_cell(R3+j, argdefs[j]);
+    }
+    jit_call(op->next,"lambda");
+  }
+
+  fflush(jit_out);
+
+  // at this point, registers R1-R6 are filled, execute
+  return 0;
+}
+
+
+void init_compiler() {
+  
+  //memdump(0x6f460,0x200,0);
+  //uart_getc();
+  
+  //printf("malloc test: %p\r\n",malloc(1024));
+
+  printf("[compiler] creating global env hash table…\r\n");
+  global_env = sm_new(1000);
+
+  printf("[compiler] init_allocator…\r\n");
+  init_allocator();
+
+  consed_type_error = alloc_cons(alloc_error(ERR_INVALID_PARAM_TYPE),alloc_nil());
+  
+  printf("[compiler] inserting symbols…\r\n");
+  
+  insert_symbol(alloc_sym("def"), alloc_builtin(BUILTIN_DEF, alloc_list((Cell*[]){alloc_int(TAG_SYM), alloc_int(TAG_ANY)}, 2)), &global_env);
+
+  insert_symbol(alloc_sym("+"), alloc_builtin(BUILTIN_ADD, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  insert_symbol(alloc_sym("-"), alloc_builtin(BUILTIN_SUB, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  insert_symbol(alloc_sym("*"), alloc_builtin(BUILTIN_MUL, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  insert_symbol(alloc_sym("/"), alloc_builtin(BUILTIN_DIV, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  //insert_symbol(alloc_sym("%"), alloc_builtin(BUILTIN_MOD), &global_env);
+  
+  printf("[compiler] arithmetic…\r\n");
+  
+  insert_symbol(alloc_sym("lt"), alloc_builtin(BUILTIN_LT, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  insert_symbol(alloc_sym("gt"), alloc_builtin(BUILTIN_GT, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_INT)}, 2)), &global_env);
+  
+  printf("[compiler] compare…\r\n");
+  
+  insert_symbol(alloc_sym("if"), alloc_builtin(BUILTIN_IF, alloc_list((Cell*[]){alloc_int(TAG_INT), alloc_int(TAG_LAMBDA), alloc_int(TAG_LAMBDA)}, 3)), &global_env);
+  insert_symbol(alloc_sym("fn"), alloc_builtin(BUILTIN_FN, NULL), &global_env);
+  insert_symbol(alloc_sym("while"), alloc_builtin(BUILTIN_WHILE, NULL), &global_env);
+  insert_symbol(alloc_sym("print"), alloc_builtin(BUILTIN_PRINT, alloc_list((Cell*[]){alloc_int(TAG_ANY)}, 1)), &global_env);
+  insert_symbol(alloc_sym("do"), alloc_builtin(BUILTIN_DO, NULL), &global_env);
+  
+  printf("[compiler] flow…\r\n");
+  
+  insert_symbol(alloc_sym("car"), alloc_builtin(BUILTIN_CAR, alloc_list((Cell*[]){alloc_int(TAG_CONS)}, 1)), &global_env);
+  insert_symbol(alloc_sym("cdr"), alloc_builtin(BUILTIN_CDR, alloc_list((Cell*[]){alloc_int(TAG_CONS)}, 1)), &global_env);
+  insert_symbol(alloc_sym("cons"), alloc_builtin(BUILTIN_CONS, alloc_list((Cell*[]){alloc_int(TAG_ANY), alloc_int(TAG_ANY)}, 2)), &global_env);
+  insert_symbol(alloc_sym("list"), alloc_builtin(BUILTIN_LIST, NULL), &global_env);
+  insert_symbol(alloc_sym("quote"), alloc_builtin(BUILTIN_QUOTE, NULL), &global_env);
+  //insert_symbol(alloc_sym("map"), alloc_builtin(BUILTIN_MAP), &global_env);
+
+  printf("[compiler] lists…\r\n");
+  
+  insert_symbol(alloc_sym("concat"), alloc_builtin(BUILTIN_CONCAT, alloc_list((Cell*[]){alloc_int(TAG_STR), alloc_int(TAG_STR)}, 2)), &global_env);
+  insert_symbol(alloc_sym("substr"), alloc_builtin(BUILTIN_SUBSTR, alloc_list((Cell*[]){alloc_int(TAG_STR), alloc_int(TAG_INT), alloc_int(TAG_INT)}, 3)), &global_env);
+  insert_symbol(alloc_sym("get"), alloc_builtin(BUILTIN_GET, alloc_list((Cell*[]){alloc_int(TAG_STR), alloc_int(TAG_INT)}, 2)), &global_env);
+  insert_symbol(alloc_sym("put"), alloc_builtin(BUILTIN_PUT, alloc_list((Cell*[]){alloc_int(TAG_STR), alloc_int(TAG_INT), alloc_int(TAG_INT)}, 3)), &global_env);
+  insert_symbol(alloc_sym("size"), alloc_builtin(BUILTIN_SIZE, alloc_list((Cell*[]){alloc_int(TAG_STR)}, 1)), &global_env);
+  insert_symbol(alloc_sym("alloc"), alloc_builtin(BUILTIN_ALLOC, alloc_list((Cell*[]){alloc_int(TAG_INT)}, 1)), &global_env);
+  insert_symbol(alloc_sym("alloc-str"), alloc_builtin(BUILTIN_ALLOC_STR, alloc_list((Cell*[]){alloc_int(TAG_INT)}, 1)), &global_env);
+
+  printf("[compiler] strings…\r\n");
+  
+  /*insert_symbol(alloc_sym("uget"), alloc_builtin(BUILTIN_UGET), &global_env);
+  insert_symbol(alloc_sym("uput"), alloc_builtin(BUILTIN_UPUT), &global_env);
+  insert_symbol(alloc_sym("usize"), alloc_builtin(BUILTIN_USIZE), &global_env);
+
+  printf("[compiler] get/put…\r\n");
+  
+  insert_symbol(alloc_sym("write"), alloc_builtin(BUILTIN_WRITE), &global_env);
+  insert_symbol(alloc_sym("eval"), alloc_builtin(BUILTIN_EVAL), &global_env);
+  
+  printf("[compiler] write/eval…\r\n");
+  
+  insert_symbol(alloc_sym("pixel"), alloc_builtin(BUILTIN_PIXEL), &global_env);
+  insert_symbol(alloc_sym("rectfill"), alloc_builtin(BUILTIN_RECTFILL), &global_env);
+  insert_symbol(alloc_sym("flip"), alloc_builtin(BUILTIN_FLIP), &global_env);
+  insert_symbol(alloc_sym("blit"), alloc_builtin(BUILTIN_BLIT), &global_env);
+  insert_symbol(alloc_sym("blit-mono"), alloc_builtin(BUILTIN_BLIT_MONO), &global_env);
+  insert_symbol(alloc_sym("blit-mono-inv"), alloc_builtin(BUILTIN_BLIT_MONO_INV), &global_env);
+  insert_symbol(alloc_sym("blit-string"), alloc_builtin(BUILTIN_BLIT_STRING), &global_env);
+  insert_symbol(alloc_sym("inkey"), alloc_builtin(BUILTIN_INKEY), &global_env);
+  
+  printf("[compiler] graphics…\r\n");
+  */
+  insert_symbol(alloc_sym("gc"), alloc_builtin(BUILTIN_GC, NULL), &global_env);
+  /*insert_symbol(alloc_sym("symbols"), alloc_builtin(BUILTIN_SYMBOLS), &global_env);
+  insert_symbol(alloc_sym("load"), alloc_builtin(BUILTIN_LOAD), &global_env);
+  insert_symbol(alloc_sym("save"), alloc_builtin(BUILTIN_SAVE), &global_env);
+  
+  printf("[compiler] gc/load/save…\r\n");
+  
+  insert_symbol(alloc_sym("udp-poll"), alloc_builtin(BUILTIN_UDP_POLL), &global_env);
+  insert_symbol(alloc_sym("udp-send"), alloc_builtin(BUILTIN_UDP_SEND), &global_env);
+
+  printf("[compiler] udp…\r\n");
+  
+  insert_symbol(alloc_sym("tcp-bind"), alloc_builtin(BUILTIN_TCP_BIND), &global_env);
+  insert_symbol(alloc_sym("tcp-connect"), alloc_builtin(BUILTIN_TCP_CONNECT), &global_env);
+  insert_symbol(alloc_sym("tcp-send"), alloc_builtin(BUILTIN_TCP_SEND), &global_env);
+
+  printf("[compiler] tcp…\r\n");
+  
+  insert_symbol(alloc_sym("sin"), alloc_builtin(BUILTIN_SIN), &global_env);
+  insert_symbol(alloc_sym("cos"), alloc_builtin(BUILTIN_COS), &global_env);
+  insert_symbol(alloc_sym("sqrt"), alloc_builtin(BUILTIN_SQRT), &global_env);
+
+  printf("[compiler] math.\r\n");*/
+  
+  int num_syms = sm_get_count(global_env);
+  printf("sledge knows %u symbols. enter (symbols) to see them.\r\n", num_syms);
+}

bjos/sledge/compiler_new.h

@@ -0,0 +1,71 @@
+
+typedef enum builtin_t {
+  BUILTIN_ADD = 1,
+  BUILTIN_SUB,
+  BUILTIN_MUL,
+  BUILTIN_DIV,
+  BUILTIN_MOD,
+
+  BUILTIN_LT,
+  BUILTIN_GT,
+  BUILTIN_EQ,
+
+  BUILTIN_WHILE,
+
+  BUILTIN_DEF,
+  BUILTIN_IF ,
+  BUILTIN_FN ,
+
+  BUILTIN_CAR,
+  BUILTIN_CDR,
+  BUILTIN_CONS,
+  BUILTIN_LIST,
+
+  BUILTIN_ALLOC,
+  BUILTIN_ALLOC_STR,
+  BUILTIN_CONCAT,
+  BUILTIN_SUBSTR,
+
+  BUILTIN_GET,
+  BUILTIN_PUT,
+  BUILTIN_SIZE,
+
+  BUILTIN_UGET,
+  BUILTIN_UPUT,
+  BUILTIN_USIZE,
+
+  BUILTIN_TYPE,
+  BUILTIN_LET,
+  BUILTIN_QUOTE,
+  BUILTIN_MAP,
+  BUILTIN_DO,
+
+  BUILTIN_EVAL,
+  BUILTIN_WRITE,
+
+  BUILTIN_PRINT,
+
+  BUILTIN_PIXEL,
+  BUILTIN_FLIP,
+  BUILTIN_RECTFILL,
+  BUILTIN_BLIT,
+  BUILTIN_BLIT_MONO,
+  BUILTIN_BLIT_MONO_INV,
+  BUILTIN_BLIT_STRING,
+  BUILTIN_INKEY,
+
+  BUILTIN_ALIEN,
+  BUILTIN_GC,
+  BUILTIN_SYMBOLS,
+  BUILTIN_LOAD,
+  BUILTIN_SAVE,
+  BUILTIN_UDP_POLL,
+  BUILTIN_UDP_SEND,
+  BUILTIN_TCP_CONNECT,
+  BUILTIN_TCP_BIND,
+  BUILTIN_TCP_SEND,
+
+  BUILTIN_SIN,
+  BUILTIN_COS,
+  BUILTIN_SQRT
+} builtin_t;

bjos/sledge/jit_arm.c

@@ -0,0 +1,42 @@
+
+void jit_movi(int reg, int imm) {
+  fprintf(jit_out, "ldr r%d, =%d\n", reg, imm);
+}
+
+void jit_movr(int dreg, int sreg) {
+  fprintf(jit_out, "mov r%d, r%d\n", dreg, sreg);
+}
+
+void jit_ldr(int reg, void* addr) {
+  fprintf(jit_out, "ldr r%d, =%p\n",  reg, addr);
+  fprintf(jit_out, "ldr r%d, [r%d]\n", reg, reg);
+}
+
+void jit_lea(int reg, void* addr) {
+  fprintf(jit_out, "ldr r%d, =%p\n", reg, addr);
+}
+
+void jit_addr(int dreg, int sreg) {
+  fprintf(jit_out, "add r%d, r%d, r%d\n", dreg, sreg, sreg);
+}
+
+void jit_call(void* func, char* note) {
+  fprintf(jit_out, "ldr lr, =%p // %s\n",func,note);
+  fprintf(jit_out, "bx lr\n");
+}
+
+void jit_push(int r1, int r2) {
+  if (r1==r2) {
+    fprintf(jit_out, "push {r%d}\n",r1);
+  } else {
+    fprintf(jit_out, "push {r%d-r%d}\n",r1,r2);
+  }
+}
+
+void jit_pop(int r1, int r2) {
+  if (r1==r2) {
+    fprintf(jit_out, "pop {r%d}\n",r1);
+  } else {
+    fprintf(jit_out, "pop {r%d-r%d}\n",r2,r1);
+  }
+}

bjos/sledge/jit_x64.c

@@ -0,0 +1,118 @@
+
+char* regnames[] = {
+  "%rax",
+  "%rdi",
+  "%rsi",
+  "%rdx",
+  "%rcx",
+  "%r8",
+  "%r9",
+  "%r10",
+  "%r11"
+};
+
+void jit_movi(int reg, void* imm) {
+  fprintf(jit_out, "movq $%p, %s\n", imm, regnames[reg]);
+}
+
+void jit_movr(int dreg, int sreg) {
+  fprintf(jit_out, "movq %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_movneg(int dreg, int sreg) {
+  fprintf(jit_out, "cmovs %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_movne(int dreg, int sreg) {
+  fprintf(jit_out, "cmovne %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_lea(int reg, void* addr) {
+  fprintf(jit_out, "mov $%p, %s\n", addr, regnames[reg]);
+}
+
+void jit_ldr(int reg) {
+  fprintf(jit_out, "mov (%s), %s\n", regnames[reg], regnames[reg]);
+}
+
+// clobbers rdx!
+void jit_ldrb(int reg) {
+  fprintf(jit_out, "movb (%s), %%dl\n", regnames[reg]);
+  fprintf(jit_out, "andq $0xff, %rdx\n", regnames[reg]);
+  if (reg!=3) {
+    fprintf(jit_out, "movq %%rdx, %s\n", regnames[reg]);
+  }
+}
+
+// only from rdx!
+void jit_strb(int reg) {
+  fprintf(jit_out, "movb %%dl, (%s)\n", regnames[reg]);
+}
+
+void jit_addr(int dreg, int sreg) {
+  fprintf(jit_out, "addq %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_addi(int dreg, int imm) {
+  fprintf(jit_out, "addq $%d, %s\n", imm, regnames[dreg]);
+}
+
+void jit_subr(int dreg, int sreg) {
+  fprintf(jit_out, "subq %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_mulr(int dreg, int sreg) {
+  fprintf(jit_out, "imulq %s, %s\n", regnames[sreg], regnames[dreg]);
+}
+
+void jit_divr(int dreg, int sreg) {
+  fprintf(jit_out, "movq %s, %%rax\n", regnames[dreg]);
+  fprintf(jit_out, "cqto\n");
+  fprintf(jit_out, "idivq %s\n", regnames[sreg]);
+  fprintf(jit_out, "movq %%rax, %s\n", regnames[dreg]);
+}
+
+void jit_call(void* func, char* note) {
+  fprintf(jit_out, "mov $%p, %%rax\n", func);
+  fprintf(jit_out, "callq *%%rax # %s\n", note);
+}
+
+void jit_cmpi(int sreg, int imm) {
+  fprintf(jit_out, "cmp $%d, %s\n", imm, regnames[sreg]);
+}
+
+void jit_cmpr(int sreg, int dreg) {
+  fprintf(jit_out, "cmp %s, %s\n", regnames[dreg], regnames[sreg]);
+}
+
+void jit_je(char* label) {
+  fprintf(jit_out, "je %s\n", label);
+}
+
+void jit_jneg(char* label) {
+  fprintf(jit_out, "js %s\n", label);
+}
+
+void jit_jmp(char* label) {
+  fprintf(jit_out, "jmp %s\n", label);
+}
+
+void jit_label(char* label) {
+  fprintf(jit_out, "%s:\n", label);
+}
+
+void jit_ret() {
+  fprintf(jit_out, "ret\n");
+}
+
+void jit_push(int r1, int r2) {
+  for (int i=r1; i<=r2; i++) {
+    fprintf(jit_out, "push %s\n",regnames[i]);
+  }
+}
+
+void jit_pop(int r1, int r2) {
+  for (int i=r2; i>=r1; i--) {
+    fprintf(jit_out, "pop %s\n",regnames[i]);
+  }
+}

bjos/sledge/machine.h

@@ -1,8 +1,13 @@
 #include "minilisp.h"
 #include <stdint.h>
 
-int machine_video_set_pixel(uint32_t x,uint32_t y,uint32_t c);
-int machine_video_rect(uint32_t x,uint32_t y,uint32_t w,uint32_t h,uint32_t c);
+#define SCREEN_W 640
+#define SCREEN_H 480
+#define COLOR_TYPE uint8_t
+#define SCREEN_BPP 1 // bytes per pixel
+
+int machine_video_set_pixel(uint32_t x,uint32_t y,COLOR_TYPE c);
+int machine_video_rect(uint32_t x,uint32_t y,uint32_t w,uint32_t h,COLOR_TYPE c);
 int machine_video_flip();
 
 int machine_get_key();

bjos/sledge/minilisp.h

@@ -1,8 +1,10 @@
 #ifndef MINILISP_H
 #define MINILISP_H
 
-#include "lightning.h" // for jit_word_t
-#include "uthash.h"
+#define jit_word_t unsigned long
+
+//#include "lightning.h" // for jit_word_t
+#include "strmap.h"
 
 #define TAG_FREED 0
 #define TAG_INT  1
@@ -64,7 +66,6 @@ int is_nil(Cell* c);
 typedef struct env_entry {
   Cell* cell;
   char name[64];
-  UT_hash_handle hh;
 } env_entry;
 
 typedef Cell* (*alien_func)(Cell* args, Cell* env);

bjos/sledge/sledge.c

@@ -1,27 +1,39 @@
 #include <sys/time.h>
 #include <sys/stat.h>
 #include <stdio.h>
-#include <lightning.h>
+#include "minilisp.h"
 #include <stdint.h>
 #include <stdlib.h>
+#include <sys/mman.h> // mprotect
 
 #include "sdl.h"
 
 #define MAX_INT 4294967296
-#define DEBUG 1
+//#define DEBUG 0
+
+#define KNRM  "\x1B[0m"
+#define KRED  "\x1B[31m"
+#define KGRN  "\x1B[32m"
+#define KYEL  "\x1B[33m"
+#define KBLU  "\x1B[34m"
+#define KMAG  "\x1B[35m"
+#define KCYN  "\x1B[36m"
+#define KWHT  "\x1B[37m"
 
 typedef jit_word_t (*funcptr)();
-static jit_state_t *_jit;
+//static jit_state_t *_jit;
 static void *stack_ptr, *stack_base;
 
-#include "compiler.c"
+//#include "compiler.c"
+
+#include "compiler_new.c"
 
-inline int machine_video_set_pixel(uint32_t x, uint32_t y, uint32_t color) {
-  sdl_setpixel(x,y,color);
+int machine_video_set_pixel(uint32_t x, uint32_t y, COLOR_TYPE color) {
+  //sdl_setpixel(x,y,color);
   return 1;
 }
 
-inline int machine_video_rect(uint32_t x, uint32_t y, uint32_t w, uint32_t h, uint32_t color) {
+int machine_video_rect(uint32_t x, uint32_t y, uint32_t w, uint32_t h, COLOR_TYPE color) {
   uint32_t y1=y;
   uint32_t y2=y+h;
   uint32_t x2=x+w;
@@ -29,20 +41,21 @@ inline int machine_video_rect(uint32_t x, uint32_t y, uint32_t w, uint32_t h, ui
   for (; y1<y2; y1++) {
     uint32_t x1=x;
     for (; x1<x2; x1++) {
-      sdl_setpixel(x1,y1,color);
+      //sdl_setpixel(x1,y1,color);
     }
   }
 }
 
 inline int machine_video_flip() {
-  sdl_mainloop();
-  machine_video_rect(0,0,1920,1080,0xffffff);
+  //sdl_mainloop();
+  machine_video_rect(0,0,1920,1080,0xff);
   return 1;
 }
 
 int machine_get_key(int modifiers) {
-  if (modifiers) return sdl_get_modifiers();
-  int k = sdl_get_key();
+  //if (modifiers) return sdl_get_modifiers();
+  //int k = sdl_get_key();
+  int k = 0;
   //if (k) printf("k: %d\n",k);
   if (k==43) k=134;
   if (k==80) k=130;
@@ -100,6 +113,7 @@ Cell* machine_load_file(char* path) {
 
 #include <sys/socket.h>
 #include <netinet/in.h>
+#include <unistd.h>
 
 // TODO: create socket handle and return it
 
@@ -191,6 +205,10 @@ static inline void stop_clock()
   printf("%llu ms\n", t);
 }
 
+Cell* execute_jitted(void* binary) {
+  return (Cell*)((funcptr)binary)(0);
+}
+
 ssize_t getline(char **lineptr, size_t *n, FILE *stream);
 
 int main(int argc, char *argv[])
@@ -208,8 +226,8 @@ int main(int argc, char *argv[])
     fullscreen = 1;
   }
 
-  uint32_t* FB = (uint32_t*)sdl_init(fullscreen);
-  init_blitter(FB);
+  uint32_t* FB = 0; //(uint32_t*)sdl_init(fullscreen);
+  //init_blitter(FB);
   
   Cell* unif = machine_load_file("unifont");
   printf("~~ unifont is at %p\r\n",unif->addr);
@@ -263,44 +281,120 @@ int main(int argc, char *argv[])
       in_offset=0;
     }
     
-    jit_node_t  *in;
+    //jit_node_t  *in;
     funcptr     compiled;
     
     if (expr) {
       if (!jit_inited) { 
-        init_jit(argv[0]);
+        //init_jit(argv[0]);
         jit_inited = 1;
       }
 
       //stack_ptr = stack_base;
         
-      _jit = jit_new_state();
-      jit_prolog();
+      //_jit = jit_new_state();
+      //jit_prolog();
       
       Cell* res;
-      int success = compile_arg(JIT_R0, expr, TAG_ANY);
+      //int success = compile_arg(JIT_R0, expr, TAG_ANY);
+      int success = 1;
+      
+      jit_out = fopen("/tmp/jit_out.s","w");
+  
+      int tag = compile_expr(expr, NULL);
+      jit_ret();
 
       if (success) {
-        compiled = jit_emit();
+        //compiled = jit_emit();
       
 #ifdef DEBUG
         //jit_disassemble();
-      start_clock();
+        start_clock();
 #endif
+        fclose(jit_out);
+
+        FILE* asm_f = fopen("/tmp/jit_out.s","r");
+        uint32_t* jit_asm = malloc(4096);
+        memset(jit_asm, 0, 4096);
+        fread(jit_asm,1,4096,asm_f);
+        fclose(asm_f);
+        printf("\nJIT ---------------------\n%s-------------------------\n\n",jit_asm);
 
-        res = (Cell*)compiled(0);
+        // prefix with arm-none-eabi- on ARM  -mlittle-endian
+      
+        system("as /tmp/jit_out.s -o /tmp/jit_out.o");
+        system("objcopy /tmp/jit_out.o -O binary /tmp/jit_out.bin");
+
+        FILE* binary_f = fopen("/tmp/jit_out.bin","r");
+        //uint32_t* jit_binary = malloc(4096);
+
+        uint32_t* jit_binary = mmap(0, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, 0, 0);
+        
+        int bytes_read = fread(jit_binary,1,4096,binary_f);
+        fclose(binary_f);
+
+        printf("<assembled bytes: %d at: %p>\n",bytes_read,jit_binary);
+
+        // read symbols for linking lambdas
+        system("nm /tmp/jit_out.o > /tmp/jit_out.syms");
+        FILE* link_f = fopen("/tmp/jit_out.syms","r");
+        if (link_f) {
+          char link_line[128];
+          while(fgets(link_line, sizeof(link_line), link_f)) {
+
+            if (strlen(link_line)>22) {
+              char ida=link_line[19];
+              char idb=link_line[20];
+              char idc=link_line[21];
+              //printf("link_line: %s %c %c %c\n",link_line,ida,idb,idc);
+
+              if (ida=='f' && idc=='_') {
+                Cell* lambda = (Cell*)strtoul(&link_line[24], NULL, 16);
+                if (idb=='0') {
+                  // function entrypoint
+                  // TODO: 64/32 bit
+                  unsigned long long offset = strtoul(link_line, NULL, 16);
+                  void* binary = ((uint8_t*)jit_binary) + offset;
+                  printf("function %p entrypoint: %p (+%ld)\n",lambda,binary,offset);
+
+                  if (lambda->tag == TAG_LAMBDA) {
+                    lambda->next = binary;
+                  } else {
+                    printf("fatal error: no lambda found at %p!\n",lambda);
+                  }
+                }
+                else if (idb=='1') {
+                  // function exit
+                  unsigned long long offset = strtoul(link_line, NULL, 16);
+                  printf("function exit point: %p\n",offset);
+                }
+              }
+            }
+          }
+        }
+      
+        //arm_emulate(jit_binary);
+        int mp_res = mprotect(jit_binary, 4096, PROT_EXEC|PROT_READ);
+
+        if (!mp_res) {
+          res = execute_jitted(jit_binary);
+        } else {
+          printf("<mprotect result: %d\n>",mp_res);
+          res = NULL;
+        }
+        
       } else {
         printf("<compilation failed>\n");
         res = NULL;
       }
 
       // TODO: move to write op
-      if (!res) {
-        printf("null\n");
+      if (res<cell_heap_start) {
+        printf("invalid cell (%p)\n",res);
       } else {
         char out_buf[1024*10];
         lisp_write(res, out_buf, 1024*10);
-        printf("%s\n",out_buf);
+        printf(KBLU "\n%s\n\n" KWHT,out_buf);
       }
       
 #ifdef DEBUG
@@ -312,13 +406,13 @@ int main(int argc, char *argv[])
 
       //collect_garbage(global_env);
       
-      jit_clear_state();
-      jit_destroy_state();
+      //jit_clear_state();
+      //jit_destroy_state();
     } else {
     }
 
-    sdl_mainloop();
+    //sdl_mainloop();
   }
-  finish_jit();
+  //finish_jit();
   return 0;
 }

bjos/sledge/strmap.c

@@ -0,0 +1,502 @@
+/*
+ *    strmap version 2.0.1
+ *
+ *    ANSI C hash table for strings.
+ *
+ *	  Version history:
+ *	  1.0.0 - initial release
+ *	  2.0.0 - changed function prefix from strmap to sm to ensure
+ *	      ANSI C compatibility 
+ *	  2.0.1 - improved documentation 
+ *
+ *    strmap.c
+ *
+ *    Copyright (c) 2009, 2011, 2013 Per Ola Kristensson.
+ *
+ *    Per Ola Kristensson <pok21@cam.ac.uk> 
+ *    Inference Group, Department of Physics
+ *    University of Cambridge
+ *    Cavendish Laboratory
+ *    JJ Thomson Avenue
+ *    CB3 0HE Cambridge
+ *    United Kingdom
+ *
+ *    strmap is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    strmap is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with strmap.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "strmap.h"
+
+typedef struct Pair Pair;
+
+typedef struct Bucket Bucket;
+
+struct Pair {
+	char *key;
+	void *value;
+};
+
+struct Bucket {
+	unsigned int count;
+	Pair *pairs;
+};
+
+struct StrMap {
+	unsigned int count;
+	Bucket *buckets;
+};
+
+static Pair * get_pair(Bucket *bucket, const char *key);
+static unsigned long hash(const char *str);
+
+StrMap * sm_new(unsigned int capacity)
+{
+	StrMap *map;
+	
+	map = malloc(sizeof(StrMap));
+	if (map == NULL) {
+		return NULL;
+	}
+	map->count = capacity;
+	map->buckets = malloc(map->count * sizeof(Bucket));
+	if (map->buckets == NULL) {
+		free(map);
+		return NULL;
+	}
+	memset(map->buckets, 0, map->count * sizeof(Bucket));
+	return map;
+}
+
+void sm_delete(StrMap *map)
+{
+	unsigned int i, j, n, m;
+	Bucket *bucket;
+	Pair *pair;
+
+	if (map == NULL) {
+		return;
+	}
+	n = map->count;
+	bucket = map->buckets;
+	i = 0;
+	while (i < n) {
+		m = bucket->count;
+		pair = bucket->pairs;
+		j = 0;
+		while(j < m) {
+			free(pair->key);
+			//free(pair->value);
+			pair++;
+			j++;
+		}
+		free(bucket->pairs);
+		bucket++;
+		i++;
+	}
+	free(map->buckets);
+	free(map);
+}
+
+int sm_get(const StrMap *map, const char *key, void **out_buf)
+{
+	unsigned int index;
+	Bucket *bucket;
+	Pair *pair;
+
+	if (map == NULL) {
+		return 0;
+	}
+	if (key == NULL) {
+		return 0;
+	}
+	index = hash(key) % map->count;
+	bucket = &(map->buckets[index]);
+	pair = get_pair(bucket, key);
+	if (pair == NULL) {
+		return 0;
+	}
+  *out_buf = pair->value;
+	return 1;
+}
+
+int sm_exists(const StrMap *map, const char *key)
+{
+	unsigned int index;
+	Bucket *bucket;
+	Pair *pair;
+
+	if (map == NULL) {
+		return 0;
+	}
+	if (key == NULL) {
+		return 0;
+	}
+	index = hash(key) % map->count;
+	bucket = &(map->buckets[index]);
+	pair = get_pair(bucket, key);
+	if (pair == NULL) {
+		return 0;
+	}
+	return 1;
+}
+
+int sm_put(StrMap *map, const char *key, void* value)
+{
+	unsigned int key_len, index;
+	Bucket *bucket;
+	Pair *tmp_pairs, *pair;
+	//char *tmp_value;
+	char *new_key; //, *new_value;
+
+	if (map == NULL) {
+		return 0;
+	}
+	if (key == NULL || value == NULL) {
+		return 0;
+	}
+	key_len = strlen(key);
+	/* Get a pointer to the bucket the key string hashes to */
+	index = hash(key) % map->count;
+	bucket = &(map->buckets[index]);
+	/* Check if we can handle insertion by simply replacing
+	 * an existing value in a key-value pair in the bucket.
+	 */
+	if ((pair = get_pair(bucket, key)) != NULL) {
+		/* The bucket contains a pair that matches the provided key,
+		 * change the value for that pair to the new value.
+		 */
+		/*if (strlen(pair->value) < value_len) {
+			tmp_value = realloc(pair->value, (value_len + 1) * sizeof(char));
+			if (tmp_value == NULL) {
+				return 0;
+			}
+			pair->value = tmp_value;
+      }*/
+		/* Copy the new value into the pair that matches the key */
+		pair->value = value;
+		return 1;
+	}
+	/* Allocate space for a new key and value */
+	new_key = malloc((key_len + 1) * sizeof(char));
+	if (new_key == NULL) {
+		return 0;
+	}
+	/*new_value = malloc((value_len) * sizeof(char));
+	if (new_value == NULL) {
+		free(new_key);
+		return 0;
+    }*/
+	/* Create a key-value pair */
+	if (bucket->count == 0) {
+		/* The bucket is empty, lazily allocate space for a single
+		 * key-value pair.
+		 */
+		bucket->pairs = malloc(sizeof(Pair));
+		if (bucket->pairs == NULL) {
+			free(new_key);
+			//free(new_value);
+			return 0;
+		}
+		bucket->count = 1;
+	}
+	else {
+		/* The bucket wasn't empty but no pair existed that matches the provided
+		 * key, so create a new key-value pair.
+		 */
+		tmp_pairs = realloc(bucket->pairs, (bucket->count + 1) * sizeof(Pair));
+		if (tmp_pairs == NULL) {
+			free(new_key);
+			//free(new_value);
+			return 0;
+		}
+		bucket->pairs = tmp_pairs;
+		bucket->count++;
+	}
+	/* Get the last pair in the chain for the bucket */
+	pair = &(bucket->pairs[bucket->count - 1]);
+	pair->key = new_key;
+	//pair->value = new_value;
+	/* Copy the key and its value into the key-value pair */
+	strcpy(pair->key, key);
+	pair->value = value;
+	return 1;
+}
+
+int sm_get_count(const StrMap *map)
+{
+	unsigned int i, j, n, m;
+	unsigned int count;
+	Bucket *bucket;
+	Pair *pair;
+
+	if (map == NULL) {
+		return 0;
+	}
+	bucket = map->buckets;
+	n = map->count;
+	i = 0;
+	count = 0;
+	while (i < n) {
+		pair = bucket->pairs;
+		m = bucket->count;
+		j = 0;
+		while (j < m) {
+			count++;
+			pair++;
+			j++;
+		}
+		bucket++;
+		i++;
+	}
+	return count;
+}
+
+int sm_enum(const StrMap *map, sm_enum_func enum_func, const void *obj)
+{
+	unsigned int i, j, n, m;
+	Bucket *bucket;
+	Pair *pair;
+
+	if (map == NULL) {
+		return 0;
+	}
+	if (enum_func == NULL) {
+		return 0;
+	}
+	bucket = map->buckets;
+	n = map->count;
+	i = 0;
+	while (i < n) {
+		pair = bucket->pairs;
+		m = bucket->count;
+		j = 0;
+		while (j < m) {
+			enum_func(pair->key, pair->value, obj);
+			pair++;
+			j++;
+		}
+		bucket++;
+		i++;
+	}
+	return 1;
+}
+
+/*
+ * Returns a pair from the bucket that matches the provided key,
+ * or null if no such pair exist.
+ */
+static Pair * get_pair(Bucket *bucket, const char *key)
+{
+	unsigned int i, n;
+	Pair *pair;
+
+	n = bucket->count;
+	if (n == 0) {
+		return NULL;
+	}
+	pair = bucket->pairs;
+	i = 0;
+	while (i < n) {
+		if (pair->key != NULL && pair->value != NULL) {
+			if (strcmp(pair->key, key) == 0) {
+				return pair;
+			}
+		}
+		pair++;
+		i++;
+	}
+	return NULL;
+}
+
+/*
+ * Returns a hash code for the provided string.
+ */
+static unsigned long hash(const char *str)
+{
+	unsigned long hash = 5381;
+	int c;
+
+	while (c = *str++) {
+		hash = ((hash << 5) + hash) + c;
+	}
+	return hash;
+}
+
+/*
+
+		   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+
+*/

bjos/sledge/strmap.h

@@ -0,0 +1,356 @@
+/*
+ *    strmap version 2.0.1
+ *
+ *    ANSI C hash table for strings.
+ *
+ *	  Version history:
+ *	  1.0.0 - initial release
+ *	  2.0.0 - changed function prefix from strmap to sm to ensure
+ *	      ANSI C compatibility
+ *	  2.0.1 - improved documentation 
+ *
+ *    strmap.h
+ *
+ *    Copyright (c) 2009, 2011, 2013 Per Ola Kristensson.
+ *
+ *    Per Ola Kristensson <pok21@cam.ac.uk> 
+ *    Inference Group, Department of Physics
+ *    University of Cambridge
+ *    Cavendish Laboratory
+ *    JJ Thomson Avenue
+ *    CB3 0HE Cambridge
+ *    United Kingdom
+ *
+ *    strmap is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    strmap is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with strmap.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _STRMAP_H_
+#define _STRMAP_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+
+typedef struct StrMap StrMap;
+
+/*
+ * This callback function is called once per key-value when iterating over
+ * all keys associated to values.
+ *
+ * Parameters:
+ *
+ * key: A pointer to a null-terminated C string. The string must not
+ * be modified by the client.
+ *
+ * value: A pointer to a null-terminated C string. The string must
+ * not be modified by the client.
+ *
+ * obj: A pointer to a client-specific object. This parameter may be
+ * null.
+ *
+ * Return value: None.
+ */
+typedef void(*sm_enum_func)(const char *key, void *value, const void *obj);
+
+/*
+ * Creates a string map.
+ *
+ * Parameters:
+ *
+ * capacity: The number of top-level slots this string map
+ * should allocate. This parameter must be > 0.
+ *
+ * Return value: A pointer to a string map object, 
+ * or null if a new string map could not be allocated.
+ */
+StrMap * sm_new(unsigned int capacity);
+
+/*
+ * Releases all memory held by a string map object.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ * If the supplied string map has been previously released, the
+ * behaviour of this function is undefined.
+ *
+ * Return value: None.
+ */
+void sm_delete(StrMap *map);
+
+/*
+ * Returns the value associated with the supplied key.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ *
+ * key: A pointer to a null-terminated C string. This parameter cannot
+ * be null.
+ *
+ * out_buf: A pointer to an output buffer which will contain the value,
+ * if it exists and fits into the buffer.
+ *
+ * n_out_buf: The size of the output buffer in bytes.
+ *
+ * Return value: If out_buf is set to null and n_out_buf is set to 0 the return
+ * value will be the number of bytes required to store the value (if it exists)
+ * and its null-terminator. For all other parameter configurations the return value
+ * is 1 if an associated value was found and completely copied into the output buffer,
+ * 0 otherwise.
+ */
+int sm_get(const StrMap *map, const char *key, void **out_buf);
+
+/*
+ * Queries the existence of a key.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ *
+ * key: A pointer to a null-terminated C string. This parameter cannot
+ * be null.
+ *
+ * Return value: 1 if the key exists, 0 otherwise.
+ */
+int sm_exists(const StrMap *map, const char *key);
+
+/*
+ * Associates a value with the supplied key. If the key is already
+ * associated with a value, the previous value is replaced.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ *
+ * key: A pointer to a null-terminated C string. This parameter
+ * cannot be null. The string must have a string length > 0. The
+ * string will be copied.
+ *
+ * value: A pointer to a null-terminated C string. This parameter
+ * cannot be null. The string must have a string length > 0. The
+ * string will be copied.
+ *
+ * Return value: 1 if the association succeeded, 0 otherwise.
+ */
+int sm_put(StrMap *map, const char *key, void *value);
+
+/*
+ * Returns the number of associations between keys and values.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ *
+ * Return value: The number of associations between keys and values.
+ */
+int sm_get_count(const StrMap *map);
+
+/*
+ * An enumerator over all associations between keys and values.
+ *
+ * Parameters:
+ *
+ * map: A pointer to a string map. This parameter cannot be null.
+ *
+ * enum_func: A pointer to a callback function that will be
+ * called by this procedure once for every key associated
+ * with a value. This parameter cannot be null.
+ *
+ * obj: A pointer to a client-specific object. This parameter will be
+ * passed back to the client's callback function. This parameter can
+ * be null.
+ *
+ * Return value: 1 if enumeration completed, 0 otherwise.
+ */
+int sm_enum(const StrMap *map, sm_enum_func enum_func, const void *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/*
+
+		   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+
+*/

bjos/sledge/test.s

@@ -0,0 +1,15 @@
+push {r1}
+ldr r1, =0x7f0baab61bc0
+ldr r1, [r1]
+ldr r2, =0x7f0baab61bf0
+ldr r2, [r2]
+add r1, r2, r2
+ldr lr, =0x408b58 // alloc_int
+bx lr
+mov r2, r1
+pop {r1}
+ldr r1, =0x7f0baab61b48
+ldr r1, [r1]
+add r1, r2, r2
+ldr lr, =0x408b58 // alloc_int
+bx lr

bjos/sledge/writer.c

@@ -9,7 +9,7 @@ char* write_(Cell* cell, char* buffer, int in_list, int bufsize) {
   bufsize--;
   
   buffer[0]=0;
-  if (cell == 0) {
+  if (cell == NULL) {
     snprintf(buffer, bufsize, "null");
   } else if (cell->tag == TAG_INT) {
     snprintf(buffer, bufsize, "%lld", cell->value);

pi2-build.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# -mtune=cortex-a7 -mfpu=neon-vfpv4  -ftree-vectorize
+
+set -e
+GCC_OPTS=" -g -O2 -nostartfiles -nostdlib -msoft-float -ffreestanding -fno-toplevel-reorder -march=armv5 -std=c11 -L../newlib/arm-none-eabi/lib -I../newlib/arm-none-eabi/include"
+
+# -Wcast-align
+
+COMPILE="arm-none-eabi-gcc $GCC_OPTS -I. -I./lightning/lightning -I./lightning/"
+
+if [ $1 ]
+then
+   mkdir -p obj
+   $COMPILE -c -o obj/lightning.o  lightning/lightning.c 
+   $COMPILE -c -o obj/jit_names.o  lightning/jit_names.c
+   $COMPILE -c -o obj/jit_note.o   lightning/jit_note.c
+   $COMPILE -c -o obj/jit_size.o   lightning/jit_size.c
+   $COMPILE -c -o obj/jit_memory.o lightning/jit_memory.c
+
+   $COMPILE -c -o obj/glue.o   lightning/glue.c
+   $COMPILE -c -o obj/reader.o bjos/sledge/reader.c
+   $COMPILE -c -o obj/strmap.o bjos/sledge/strmap.c
+   $COMPILE -c -o obj/alloc.o  bjos/sledge/alloc.c
+   $COMPILE -c -o obj/blit.o   bjos/sledge/blit.c
+   $COMPILE -c -o obj/writer.o bjos/sledge/writer.c
+fi
+
+arm-none-eabi-objcopy -I binary -O elf32-littlearm -B arm  bjos/rootfs/unifont  obj/unifont.o
+arm-none-eabi-objcopy -I binary -O elf32-littlearm -B arm  bjos/rootfs/editor.l obj/editor.o
+
+$COMPILE -o build/bomberjacket-arm.elf bjos/rpi2/arm_start.S bjos/main_imx233.c bjos/imx233/imx233.c -T bjos/arm.ld  obj/lightning.o obj/jit_names.o obj/jit_note.o obj/jit_size.o obj/jit_memory.o obj/glue.o obj/reader.o obj/strmap.o obj/alloc.o obj/blit.o obj/writer.o -lc -lgcc -lm obj/editor.o bjos/mini-ip.c
+
+arm-none-eabi-objcopy build/bomberjacket-arm.elf -O binary build/interim.imx
+