123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121 |
- /dts-v1/;
- #include "rt3050.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- / {
- compatible = "dlink,dir-615-d1", "ralink,rt3050-soc";
- model = "D-Link DIR-615 D";
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
- gpio-leds {
- compatible = "gpio-leds";
- status {
- label = "dir-615-d:amber:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- led_status_green: status2 {
- label = "dir-615-d:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- wan {
- label = "dir-615-d:amber:wan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- wan2 {
- label = "dir-615-d:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "dir-615-d:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
- };
- &esw {
- mediatek,portmap = <0x2f>;
- };
- &wmac {
- ralink,mtd-eeprom = <&devdata 0x4000>;
- };
- &pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
- };
|