libreCMC-next/target/linux/ramips/dts/MIWIFI-NANO.dts

/dts-v1/;

#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
	model = "MiWiFi Nano";

	aliases {
		led-boot = &led_blue;
		led-failsafe = &led_blue;
		led-running = &led_blue;
		led-upgrade = &led_blue;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x4000000>;
	};

	gpio-leds {
		compatible = "gpio-leds";

		led_blue: status_blue {
			label = "miwifi-nano:blue:status";
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
		};
		status_red {
			label = "miwifi-nano:red:status";
			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
		};
		status_amber {
			label = "miwifi-nano:amber:status";
			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys-polled";
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "refclk", "wled_an", "gpio";
			ralink,function = "gpio";
		};
	};
};

&wmac {
	status = "okay";
	ralink,mtd-eeprom = <&factory 0x4>;
};

&ethernet {
	mtd-mac-address = <&factory 0x28>;
};

&spi0 {
	status = "okay";

	m25p80@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;
		m25p,chunked-io = <32>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				label = "firmware";
				reg = <0x50000 0xfb0000>;
			};
		};
	};
};