--- /dev/null +++ b/Documentation/x86/rdc.txt @@ -0,0 +1,69 @@ + +Introduction +============ + +RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC +(system-on-chips) for a number of years. They are not the fastest of +CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility +coupled with very low power consumption[1] and low cost make them ideal +for embedded applications. + + +Where to find +============= + +RDC chips show up in numerous embedded devices, but be careful since +many of them will not run Linux 2.6 without significant expertise. + +There are several variants of what the linux kernel refers to generically +as RDC321X: R8610, R321x, S3282 and AMRISC20000. + +R321x: Found in various routers, see the libreCMC project for details, + http://wiki.openwrt.org/oldwiki/rdcport + +R8610: Found on the RDC evaluation board + http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/ + +AMRISC20000: Found in the MGB-100 wireless hard disk + http://tintuc.no-ip.com/linux/tipps/mgb100/ + +S3282: Found in various NAS devices, including the Bifferboard + http://www.bifferos.com + + +Kernel Configuration +==================== + +Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths +emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE +(CONFIG_X86_MCE not selected). + + +CPU detection +============= + +None of these chips support the cpuid instruction, so as with some +other x86 compatible SoCs, we must check the north bridge and look +for specific 'signature' PCI device config. + +The current detection code has been tested only on the Bifferboard +(S3282 CPU), please send bug reports or success stories with +other devices to bifferos@yahoo.co.uk. + + +Credits +======= + +Many thanks to RDC for providing the customer codes to allow +detection of all known variants, without which this detection code +would have been very hard to ascertain. + + +References +========== + +[1] S3282 in certain NAS solutions consumes less than 1W + + +mark@bifferos.com 2009 + --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -464,6 +464,7 @@ config X86_RDC321X bool "RDC R-321x SoC" depends on X86_32 depends on X86_EXTENDED_PLATFORM + select PCI select M486 select X86_REBOOTFIXUPS select EMBEDDED --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -119,7 +119,8 @@ struct cpuinfo_x86 { #define X86_VENDOR_CENTAUR 5 #define X86_VENDOR_TRANSMETA 7 #define X86_VENDOR_NSC 8 -#define X86_VENDOR_NUM 9 +#define X86_VENDOR_RDC 9 +#define X86_VENDOR_NUM 10 #define X86_VENDOR_UNKNOWN 0xff --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o +obj-$(CONFIG_X86_RDC321X) += rdc.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o --- /dev/null +++ b/arch/x86/kernel/cpu/rdc.c @@ -0,0 +1,69 @@ +/* + * See Documentation/x86/rdc.txt + * + * mark@bifferos.com + */ + +#include +#include +#include "cpu.h" + + +static void __cpuinit rdc_identify(struct cpuinfo_x86 *c) +{ + u16 vendor, device; + u32 customer_id; + + if (!early_pci_allowed()) + return; + + /* RDC CPU is SoC (system-on-chip), Northbridge is always present */ + vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID); + device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID); + + if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020) + return; /* not RDC */ + /* + * NB: We could go on and check other devices, e.g. r6040 NIC, but + * that's probably overkill + */ + + customer_id = read_pci_config(0, 0, 0, 0x90); + + switch (customer_id) { + /* id names are from RDC */ + case 0x00321000: + strcpy(c->x86_model_id, "R3210/R3211"); + break; + case 0x00321001: + strcpy(c->x86_model_id, "AMITRISC20000/20010"); + break; + case 0x00321002: + strcpy(c->x86_model_id, "R3210X/Edimax"); + break; + case 0x00321003: + strcpy(c->x86_model_id, "R3210/Kcodes"); + break; + case 0x00321004: /* tested */ + strcpy(c->x86_model_id, "S3282/CodeTek"); + break; + case 0x00321007: + strcpy(c->x86_model_id, "R8610"); + break; + default: + pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id); + break; + } + + strcpy(c->x86_vendor_id, "RDC"); + c->x86_vendor = X86_VENDOR_RDC; +} + +static const struct cpu_dev __cpuinitconst rdc_cpu_dev = { + .c_vendor = "RDC", + .c_ident = { "RDC" }, + .c_identify = rdc_identify, + .c_x86_vendor = X86_VENDOR_RDC, +}; + +cpu_dev_register(rdc_cpu_dev);