| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- From 2fc6dcd5e7c76c203d2e174e70ef21393a231163 Mon Sep 17 00:00:00 2001
- From: Zoltan HERPAI <wigyori@uid0.hu>
- Date: Mon, 13 Jan 2014 14:15:01 +0100
- Subject: [PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite
- pcDuino
- This patch will add a basic board support DT for the
- LinkSprite pcDuino board.
- Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
- Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
- ---
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 48 +++++++++++++++++++++++++++++++++
- 2 files changed, 49 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun4i-a10-cubieboard.dtb \
- sun4i-a10-mini-xplus.dtb \
- sun4i-a10-hackberry.dtb \
- + sun4i-a10-pcduino.dtb \
- sun5i-a10s-olinuxino-micro.dtb \
- sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb \
- --- /dev/null
- +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
- @@ -0,0 +1,48 @@
- +/*
- + * Copyright 2014 Zoltan HERPAI
- + * Zoltan HERPAI <wigyori@uid0.hu>
- + *
- + * The code contained herein is licensed under the GNU General Public
- + * License. You may obtain a copy of the GNU General Public License
- + * Version 2 or later at the following locations:
- + *
- + * http://www.opensource.org/licenses/gpl-license.html
- + * http://www.gnu.org/copyleft/gpl.html
- + */
- +
- +/dts-v1/;
- +/include/ "sun4i-a10.dtsi"
- +
- +/ {
- + model = "LinkSprite pcDuino";
- + compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
- +
- + soc@01c00000 {
- + emac: ethernet@01c0b000 {
- + pinctrl-names = "default";
- + pinctrl-0 = <&emac_pins_a>;
- + phy = <&phy1>;
- + status = "okay";
- + };
- +
- + mdio@01c0b080 {
- + status = "okay";
- +
- + phy1: ethernet-phy@1 {
- + reg = <1>;
- + };
- + };
- +
- + uart0: serial@01c28000 {
- + pinctrl-names = "default";
- + pinctrl-0 = <&uart0_pins_a>;
- + status = "okay";
- + };
- +
- + i2c0: i2c@01c2ac00 {
- + pinctrl-names = "default";
- + pinctrl-0 = <&i2c0_pins_a>;
- + status = "okay";
- + };
- + };
- +};
|
