| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697 |
- From 6e763a8ebe7a16ae5635ade146fd2930749ed775 Mon Sep 17 00:00:00 2001
- From: Hans de Goede <hdegoede@redhat.com>
- Date: Sat, 1 Mar 2014 14:57:56 +0100
- Subject: [PATCH] ARM: sunxi: dt: Add sunxi-common-regulators include file
- Most sunxi boards with a sata connector also have a gpio controlled connector
- for sata target power and almost all sunxi boards have a gpio controlled vbus
- for usb1 and usb2.
- This commit adds an include file for the regulators representing these
- supplies, avoiding the need to copy and paste the regulator code to allmost
- all sunxi board dts files.
- Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- ---
- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 75 ++++++++++++++++++++++++++
- 1 file changed, 75 insertions(+)
- create mode 100644 arch/arm/boot/dts/sunxi-common-regulators.dtsi
- --- /dev/null
- +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
- @@ -0,0 +1,75 @@
- +/*
- + * sunxi boards common regulator (ahci target power supply, usb-vbus) code
- + *
- + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- + *
- + * The code contained herein is licensed under the GNU General Public
- + * License. You may obtain a copy of the GNU General Public License
- + * Version 2 or later at the following locations:
- + *
- + * http://www.opensource.org/licenses/gpl-license.html
- + * http://www.gnu.org/copyleft/gpl.html
- + */
- +
- +/ {
- + soc@01c00000 {
- + pio: pinctrl@01c20800 {
- + ahci_pwr_pin_a: ahci_pwr_pin@0 {
- + allwinner,pins = "PB8";
- + allwinner,function = "gpio_out";
- + allwinner,drive = <0>;
- + allwinner,pull = <0>;
- + };
- +
- + usb1_vbus_pin_a: usb1_vbus_pin@0 {
- + allwinner,pins = "PH6";
- + allwinner,function = "gpio_out";
- + allwinner,drive = <0>;
- + allwinner,pull = <0>;
- + };
- +
- + usb2_vbus_pin_a: usb2_vbus_pin@0 {
- + allwinner,pins = "PH3";
- + allwinner,function = "gpio_out";
- + allwinner,drive = <0>;
- + allwinner,pull = <0>;
- + };
- + };
- + };
- +
- + reg_ahci_5v: ahci-5v {
- + compatible = "regulator-fixed";
- + pinctrl-names = "default";
- + pinctrl-0 = <&ahci_pwr_pin_a>;
- + regulator-name = "ahci-5v";
- + regulator-min-microvolt = <5000000>;
- + regulator-max-microvolt = <5000000>;
- + enable-active-high;
- + gpio = <&pio 1 8 0>;
- + status = "disabled";
- + };
- +
- + reg_usb1_vbus: usb1-vbus {
- + compatible = "regulator-fixed";
- + pinctrl-names = "default";
- + pinctrl-0 = <&usb1_vbus_pin_a>;
- + regulator-name = "usb1-vbus";
- + regulator-min-microvolt = <5000000>;
- + regulator-max-microvolt = <5000000>;
- + enable-active-high;
- + gpio = <&pio 7 6 0>;
- + status = "disabled";
- + };
- +
- + reg_usb2_vbus: usb2-vbus {
- + compatible = "regulator-fixed";
- + pinctrl-names = "default";
- + pinctrl-0 = <&usb2_vbus_pin_a>;
- + regulator-name = "usb2-vbus";
- + regulator-min-microvolt = <5000000>;
- + regulator-max-microvolt = <5000000>;
- + enable-active-high;
- + gpio = <&pio 7 3 0>;
- + status = "disabled";
- + };
- +};
|
