123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502 |
- From 509326e0138b762067904c0c60f818e9bdba4cd4 Mon Sep 17 00:00:00 2001
- From: Carlo Caione <carlo@caione.org>
- Date: Sat, 1 Mar 2014 17:45:46 +0100
- Subject: [PATCH] mfd: AXP20x: Add mfd driver for AXP20x PMIC
- This patch introduces the preliminary support for PMICs X-Powers AXP202
- and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit)
- used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company
- of Allwinner.
- The core enables support for two subsystems:
- - PEK (Power Enable Key)
- - Regulators
- Signed-off-by: Carlo Caione <carlo@caione.org>
- ---
- arch/arm/configs/sunxi_defconfig | 1 +
- drivers/mfd/Kconfig | 12 ++
- drivers/mfd/Makefile | 1 +
- drivers/mfd/axp20x.c | 250 +++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/axp20x.h | 180 ++++++++++++++++++++++++++++
- 5 files changed, 444 insertions(+)
- create mode 100644 drivers/mfd/axp20x.c
- create mode 100644 include/linux/mfd/axp20x.h
- --- a/arch/arm/configs/sunxi_defconfig
- +++ b/arch/arm/configs/sunxi_defconfig
- @@ -55,6 +55,7 @@ CONFIG_GPIO_SYSFS=y
- # CONFIG_HWMON is not set
- CONFIG_WATCHDOG=y
- CONFIG_SUNXI_WATCHDOG=y
- +CONFIG_MFD_AXP20X=y
- # CONFIG_USB_SUPPORT is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
- --- a/drivers/mfd/Kconfig
- +++ b/drivers/mfd/Kconfig
- @@ -59,6 +59,18 @@ config MFD_AAT2870_CORE
- additional drivers must be enabled in order to use the
- functionality of the device.
-
- +config MFD_AXP20X
- + bool "X-Powers AXP20X"
- + select MFD_CORE
- + select REGMAP_I2C
- + select REGMAP_IRQ
- + depends on I2C=y
- + help
- + If you say Y here you get support for the AXP20X.
- + This driver provides common support for accessing the device,
- + additional drivers must be enabled in order to use the
- + functionality of the device.
- +
- config MFD_CROS_EC
- tristate "ChromeOS Embedded Controller"
- select MFD_CORE
- --- a/drivers/mfd/Makefile
- +++ b/drivers/mfd/Makefile
- @@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.
- obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
- obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
- obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
- +obj-$(CONFIG_MFD_AXP20X) += axp20x.o
-
- obj-$(CONFIG_MFD_LP3943) += lp3943.o
- obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
- --- /dev/null
- +++ b/drivers/mfd/axp20x.c
- @@ -0,0 +1,250 @@
- +/*
- + * axp20x.c - mfd core driver for the X-Powers AXP202 and AXP209
- + *
- + * Author: Carlo Caione <carlo@caione.org>
- + *
- + * This program is free software; you can redistribute it and/or modify
- + * it under the terms of the GNU General Public License version 2 as
- + * published by the Free Software Foundation.
- + */
- +
- +#include <linux/err.h>
- +#include <linux/i2c.h>
- +#include <linux/interrupt.h>
- +#include <linux/kernel.h>
- +#include <linux/module.h>
- +#include <linux/pm_runtime.h>
- +#include <linux/regmap.h>
- +#include <linux/slab.h>
- +#include <linux/regulator/consumer.h>
- +#include <linux/mfd/axp20x.h>
- +#include <linux/mfd/core.h>
- +#include <linux/of_device.h>
- +#include <linux/of_irq.h>
- +
- +#define AXP20X_OFF 0x80
- +
- +static const struct regmap_range axp20x_writeable_ranges[] = {
- + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
- + regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
- +};
- +
- +static const struct regmap_range axp20x_volatile_ranges[] = {
- + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
- +};
- +
- +static const struct regmap_access_table axp20x_writeable_table = {
- + .yes_ranges = axp20x_writeable_ranges,
- + .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
- +};
- +
- +static const struct regmap_access_table axp20x_volatile_table = {
- + .yes_ranges = axp20x_volatile_ranges,
- + .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
- +};
- +
- +static struct resource axp20x_pek_resources[] = {
- + {
- + .name = "PEK_DBR",
- + .start = AXP20X_IRQ_PEK_RIS_EDGE,
- + .end = AXP20X_IRQ_PEK_RIS_EDGE,
- + .flags = IORESOURCE_IRQ,
- + },
- + {
- + .name = "PEK_DBF",
- + .start = AXP20X_IRQ_PEK_FAL_EDGE,
- + .end = AXP20X_IRQ_PEK_FAL_EDGE,
- + .flags = IORESOURCE_IRQ,
- + },
- +};
- +
- +static const struct regmap_config axp20x_regmap_config = {
- + .reg_bits = 8,
- + .val_bits = 8,
- + .wr_table = &axp20x_writeable_table,
- + .volatile_table = &axp20x_volatile_table,
- + .max_register = AXP20X_FG_RES,
- + .cache_type = REGCACHE_RBTREE,
- +};
- +
- +#define AXP20X_IRQ(_irq, _off, _mask) \
- + [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
- +
- +static const struct regmap_irq axp20x_regmap_irqs[] = {
- + AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- + AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- + AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- + AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- + AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- + AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- + AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- + AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- + AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- + AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- + AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- + AXP20X_IRQ(CHARG, 1, 3),
- + AXP20X_IRQ(CHARG_DONE, 1, 2),
- + AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- + AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- + AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- + AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- + AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- + AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- + AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- + AXP20X_IRQ(PEK_SHORT, 2, 1),
- + AXP20X_IRQ(PEK_LONG, 2, 0),
- + AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- + AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- + AXP20X_IRQ(VBUS_VALID, 3, 5),
- + AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- + AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- + AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- + AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- + AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- + AXP20X_IRQ(TIMER, 4, 7),
- + AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- + AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- + AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- + AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- + AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- + AXP20X_IRQ(GPIO0_INPUT, 4, 0),
- +};
- +
- +static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
- + .name = "axp20x_irq_chip",
- + .status_base = AXP20X_IRQ1_STATE,
- + .ack_base = AXP20X_IRQ1_STATE,
- + .mask_base = AXP20X_IRQ1_EN,
- + .num_regs = 5,
- + .irqs = axp20x_regmap_irqs,
- + .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
- + .mask_invert = true,
- + .init_ack_masked = true,
- +};
- +
- +static struct mfd_cell axp20x_cells[] = {
- + {
- + .name = "axp20x-pek",
- + .of_compatible = "x-powers,axp20x-pek",
- + .num_resources = ARRAY_SIZE(axp20x_pek_resources),
- + .resources = axp20x_pek_resources,
- + }, {
- + .name = "axp20x-regulator",
- + },
- +};
- +
- +const struct of_device_id axp20x_of_match[] = {
- + { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
- + { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
- + { },
- +};
- +
- +static struct axp20x_dev *axp20x_pm_power_off;
- +static void axp20x_power_off(void)
- +{
- + regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
- + AXP20X_OFF);
- +}
- +
- +static int axp20x_i2c_probe(struct i2c_client *i2c,
- + const struct i2c_device_id *id)
- +{
- + struct axp20x_dev *axp20x;
- + const struct of_device_id *of_id;
- + struct device_node *node = i2c->dev.of_node;
- + int ret;
- +
- + axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
- + if (!axp20x)
- + return -ENOMEM;
- +
- + of_id = of_match_device(axp20x_of_match, &i2c->dev);
- + if (!of_id) {
- + dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- + return -ENODEV;
- + }
- + axp20x->variant = (int) of_id->data;
- +
- + axp20x->i2c_client = i2c;
- + axp20x->dev = &i2c->dev;
- + dev_set_drvdata(axp20x->dev, axp20x);
- +
- + axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
- + if (IS_ERR(axp20x->regmap)) {
- + ret = PTR_ERR(axp20x->regmap);
- + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
- + return ret;
- + }
- +
- + axp20x->irq = i2c->irq;
- + ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
- + IRQF_ONESHOT | IRQF_SHARED, -1,
- + &axp20x_regmap_irq_chip,
- + &axp20x->regmap_irqc);
- + if (ret) {
- + dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
- + return ret;
- + }
- +
- + ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- + ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
- + if (ret) {
- + dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
- + goto mfd_err;
- + }
- +
- + axp20x->pm_off = of_property_read_bool(node, "axp,system-power-controller");
- +
- + if (axp20x->pm_off && !pm_power_off) {
- + axp20x_pm_power_off = axp20x;
- + pm_power_off = axp20x_power_off;
- + }
- +
- + dev_info(&i2c->dev, "AXP20X driver loaded\n");
- +
- + return 0;
- +
- +mfd_err:
- + regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
- +
- + return ret;
- +}
- +
- +static int axp20x_i2c_remove(struct i2c_client *i2c)
- +{
- + struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
- +
- + if (axp20x == axp20x_pm_power_off) {
- + axp20x_pm_power_off = NULL;
- + pm_power_off = NULL;
- + }
- +
- + mfd_remove_devices(axp20x->dev);
- + regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
- +
- + return 0;
- +}
- +
- +static const struct i2c_device_id axp20x_i2c_id[] = {
- + { "axp202", AXP202_ID },
- + { "axp209", AXP209_ID },
- + { }
- +};
- +MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
- +
- +static struct i2c_driver axp20x_i2c_driver = {
- + .driver = {
- + .name = "axp20x",
- + .owner = THIS_MODULE,
- + .of_match_table = of_match_ptr(axp20x_of_match),
- + },
- + .probe = axp20x_i2c_probe,
- + .remove = axp20x_i2c_remove,
- + .id_table = axp20x_i2c_id,
- +};
- +
- +module_i2c_driver(axp20x_i2c_driver);
- +
- +MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
- +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
- +MODULE_LICENSE("GPL");
- --- /dev/null
- +++ b/include/linux/mfd/axp20x.h
- @@ -0,0 +1,180 @@
- +/*
- + * Functions to access AXP20X power management chip.
- + *
- + * Copyright (C) 2013, Carlo Caione <carlo@caione.org>
- + *
- + * This program is free software; you can redistribute it and/or modify
- + * it under the terms of the GNU General Public License version 2 as
- + * published by the Free Software Foundation.
- + */
- +
- +#ifndef __LINUX_MFD_AXP20X_H
- +#define __LINUX_MFD_AXP20X_H
- +
- +#define AXP202_ID 0
- +#define AXP209_ID 1
- +
- +#define AXP20X_DATACACHE(m) (0x04 + (m))
- +
- +/* Power supply */
- +#define AXP20X_PWR_INPUT_STATUS 0x00
- +#define AXP20X_PWR_OP_MODE 0x01
- +#define AXP20X_USB_OTG_STATUS 0x02
- +#define AXP20X_PWR_OUT_CTRL 0x12
- +#define AXP20X_DCDC2_V_OUT 0x23
- +#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
- +#define AXP20X_DCDC3_V_OUT 0x27
- +#define AXP20X_LDO24_V_OUT 0x28
- +#define AXP20X_LDO3_V_OUT 0x29
- +#define AXP20X_VBUS_IPSOUT_MGMT 0x30
- +#define AXP20X_V_OFF 0x31
- +#define AXP20X_OFF_CTRL 0x32
- +#define AXP20X_CHRG_CTRL1 0x33
- +#define AXP20X_CHRG_CTRL2 0x34
- +#define AXP20X_CHRG_BAK_CTRL 0x35
- +#define AXP20X_PEK_KEY 0x36
- +#define AXP20X_DCDC_FREQ 0x37
- +#define AXP20X_V_LTF_CHRG 0x38
- +#define AXP20X_V_HTF_CHRG 0x39
- +#define AXP20X_APS_WARN_L1 0x3a
- +#define AXP20X_APS_WARN_L2 0x3b
- +#define AXP20X_V_LTF_DISCHRG 0x3c
- +#define AXP20X_V_HTF_DISCHRG 0x3d
- +
- +/* Interrupt */
- +#define AXP20X_IRQ1_EN 0x40
- +#define AXP20X_IRQ2_EN 0x41
- +#define AXP20X_IRQ3_EN 0x42
- +#define AXP20X_IRQ4_EN 0x43
- +#define AXP20X_IRQ5_EN 0x44
- +#define AXP20X_IRQ1_STATE 0x48
- +#define AXP20X_IRQ2_STATE 0x49
- +#define AXP20X_IRQ3_STATE 0x4a
- +#define AXP20X_IRQ4_STATE 0x4b
- +#define AXP20X_IRQ5_STATE 0x4c
- +
- +/* ADC */
- +#define AXP20X_ACIN_V_ADC_H 0x56
- +#define AXP20X_ACIN_V_ADC_L 0x57
- +#define AXP20X_ACIN_I_ADC_H 0x58
- +#define AXP20X_ACIN_I_ADC_L 0x59
- +#define AXP20X_VBUS_V_ADC_H 0x5a
- +#define AXP20X_VBUS_V_ADC_L 0x5b
- +#define AXP20X_VBUS_I_ADC_H 0x5c
- +#define AXP20X_VBUS_I_ADC_L 0x5d
- +#define AXP20X_TEMP_ADC_H 0x5e
- +#define AXP20X_TEMP_ADC_L 0x5f
- +#define AXP20X_TS_IN_H 0x62
- +#define AXP20X_TS_IN_L 0x63
- +#define AXP20X_GPIO0_V_ADC_H 0x64
- +#define AXP20X_GPIO0_V_ADC_L 0x65
- +#define AXP20X_GPIO1_V_ADC_H 0x66
- +#define AXP20X_GPIO1_V_ADC_L 0x67
- +#define AXP20X_PWR_BATT_H 0x70
- +#define AXP20X_PWR_BATT_M 0x71
- +#define AXP20X_PWR_BATT_L 0x72
- +#define AXP20X_BATT_V_H 0x78
- +#define AXP20X_BATT_V_L 0x79
- +#define AXP20X_BATT_CHRG_I_H 0x7a
- +#define AXP20X_BATT_CHRG_I_L 0x7b
- +#define AXP20X_BATT_DISCHRG_I_H 0x7c
- +#define AXP20X_BATT_DISCHRG_I_L 0x7d
- +#define AXP20X_IPSOUT_V_HIGH_H 0x7e
- +#define AXP20X_IPSOUT_V_HIGH_L 0x7f
- +
- +/* Power supply */
- +#define AXP20X_DCDC_MODE 0x80
- +#define AXP20X_ADC_EN1 0x82
- +#define AXP20X_ADC_EN2 0x83
- +#define AXP20X_ADC_RATE 0x84
- +#define AXP20X_GPIO10_IN_RANGE 0x85
- +#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
- +#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
- +#define AXP20X_TIMER_CTRL 0x8a
- +#define AXP20X_VBUS_MON 0x8b
- +#define AXP20X_OVER_TMP 0x8f
- +
- +/* GPIO */
- +#define AXP20X_GPIO0_CTRL 0x90
- +#define AXP20X_LDO5_V_OUT 0x91
- +#define AXP20X_GPIO1_CTRL 0x92
- +#define AXP20X_GPIO2_CTRL 0x93
- +#define AXP20X_GPIO20_SS 0x94
- +#define AXP20X_GPIO3_CTRL 0x95
- +
- +/* Battery */
- +#define AXP20X_CHRG_CC_31_24 0xb0
- +#define AXP20X_CHRG_CC_23_16 0xb1
- +#define AXP20X_CHRG_CC_15_8 0xb2
- +#define AXP20X_CHRG_CC_7_0 0xb3
- +#define AXP20X_DISCHRG_CC_31_24 0xb4
- +#define AXP20X_DISCHRG_CC_23_16 0xb5
- +#define AXP20X_DISCHRG_CC_15_8 0xb6
- +#define AXP20X_DISCHRG_CC_7_0 0xb7
- +#define AXP20X_CC_CTRL 0xb8
- +#define AXP20X_FG_RES 0xb9
- +
- +/* Regulators IDs */
- +enum {
- + AXP20X_LDO1 = 0,
- + AXP20X_LDO2,
- + AXP20X_LDO3,
- + AXP20X_LDO4,
- + AXP20X_LDO5,
- + AXP20X_DCDC2,
- + AXP20X_DCDC3,
- + AXP20X_REG_ID_MAX,
- +};
- +
- +/* IRQs */
- +enum {
- + AXP20X_IRQ_ACIN_OVER_V = 1,
- + AXP20X_IRQ_ACIN_PLUGIN,
- + AXP20X_IRQ_ACIN_REMOVAL,
- + AXP20X_IRQ_VBUS_OVER_V,
- + AXP20X_IRQ_VBUS_PLUGIN,
- + AXP20X_IRQ_VBUS_REMOVAL,
- + AXP20X_IRQ_VBUS_V_LOW,
- + AXP20X_IRQ_BATT_PLUGIN,
- + AXP20X_IRQ_BATT_REMOVAL,
- + AXP20X_IRQ_BATT_ENT_ACT_MODE,
- + AXP20X_IRQ_BATT_EXIT_ACT_MODE,
- + AXP20X_IRQ_CHARG,
- + AXP20X_IRQ_CHARG_DONE,
- + AXP20X_IRQ_BATT_TEMP_HIGH,
- + AXP20X_IRQ_BATT_TEMP_LOW,
- + AXP20X_IRQ_DIE_TEMP_HIGH,
- + AXP20X_IRQ_CHARG_I_LOW,
- + AXP20X_IRQ_DCDC1_V_LONG,
- + AXP20X_IRQ_DCDC2_V_LONG,
- + AXP20X_IRQ_DCDC3_V_LONG,
- + AXP20X_IRQ_PEK_SHORT = 22,
- + AXP20X_IRQ_PEK_LONG,
- + AXP20X_IRQ_N_OE_PWR_ON,
- + AXP20X_IRQ_N_OE_PWR_OFF,
- + AXP20X_IRQ_VBUS_VALID,
- + AXP20X_IRQ_VBUS_NOT_VALID,
- + AXP20X_IRQ_VBUS_SESS_VALID,
- + AXP20X_IRQ_VBUS_SESS_END,
- + AXP20X_IRQ_LOW_PWR_LVL1,
- + AXP20X_IRQ_LOW_PWR_LVL2,
- + AXP20X_IRQ_TIMER,
- + AXP20X_IRQ_PEK_RIS_EDGE,
- + AXP20X_IRQ_PEK_FAL_EDGE,
- + AXP20X_IRQ_GPIO3_INPUT,
- + AXP20X_IRQ_GPIO2_INPUT,
- + AXP20X_IRQ_GPIO1_INPUT,
- + AXP20X_IRQ_GPIO0_INPUT,
- +};
- +
- +struct axp20x_dev {
- + struct device *dev;
- + struct i2c_client *i2c_client;
- + struct regmap *regmap;
- + struct regmap_irq_chip_data *regmap_irqc;
- + int variant;
- + int irq;
- + bool pm_off;
- +};
- +
- +#endif /* __LINUX_MFD_AXP20X_H */
|