Old libreCMC gitorious repository.
rcall1
9c2ac9b2c7
libreCMC name change for v1.3
|
vor 10 Jahren | |
|---|---|---|
| config | vor 10 Jahren | |
| docs | vor 10 Jahren | |
| include | vor 10 Jahren | |
| package | vor 10 Jahren | |
| scripts | vor 10 Jahren | |
| target | vor 10 Jahren | |
| toolchain | vor 10 Jahren | |
| tools | vor 10 Jahren | |
| BSDmakefile | vor 10 Jahren | |
| Config.in | vor 10 Jahren | |
| LICENSE | vor 10 Jahren | |
| Makefile | vor 10 Jahren | |
| README | vor 10 Jahren | |
| README.md | vor 10 Jahren | |
| rules.mk | vor 10 Jahren |
README
This is the buildsystem for the libreCMC Linux distribution.
Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.
You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.
Use "make menuconfig" to configure your image.
Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.
You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.
The libreCMC system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
Your libreCMC Project
http://librecmc.org
Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.
You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.
Use "make menuconfig" to configure your image.
Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.
You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.
The libreCMC system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
Your libreCMC Project
http://librecmc.org