README 1.2 KB

1234567891011121314151617181920212223242526272829303132333435
  1. This is the buildsystem for the libreCMC Linux distribution.
  2. Please use "make menuconfig" to configure your appreciated
  3. configuration for the toolchain and firmware.
  4. You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
  5. find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.
  6. Run "./scripts/feeds update -a" to get all the latest package definitions
  7. defined in feeds.conf / feeds.conf.default respectively
  8. and "./scripts/feeds install -a" to install symlinks of all of them into
  9. package/feeds/.
  10. Use "make menuconfig" to configure your image.
  11. Simply running "make" will build your firmware.
  12. It will download all sources, build the cross-compile toolchain,
  13. the kernel and all choosen applications.
  14. You can use "scripts/flashing/flash.sh" for remotely updating your embedded
  15. system via tftp.
  16. The libreCMC system is documented in docs/. You will need a LaTeX distribution
  17. and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
  18. To build your own firmware you need to have access to a Linux, BSD or MacOSX system
  19. (case-sensitive filesystem required). Cygwin will not be supported because of
  20. the lack of case sensitiveness in the file system.
  21. Sunshine!
  22. Your libreCMC Project
  23. http://librecmc.org