|
|
@@ -4,7 +4,10 @@ OC.L10N.register(
|
|
|
"Cannot write into \"config\" directory!" : "無法寫入 \"config\" 目錄！",
|
|
|
"This can usually be fixed by giving the webserver write access to the config directory" : "允許網頁伺服器寫入 \"config\" 目錄通常可以解決這個問題",
|
|
|
"See %s" : "見 %s",
|
|
|
+ "Or, if you prefer to keep config.php file read only, set the option \"config_is_read_only\" to true in it." : "或者，如果您比較希望保留 config.php 的唯讀狀態，請在該設定檔中將 \"config_is_read_only\" 設定為 true。",
|
|
|
"This can usually be fixed by giving the webserver write access to the config directory. See %s" : "允許網頁伺服器寫入 \"config\" 目錄通常可以解決這個問題，詳見 %s",
|
|
|
+ "Or, if you prefer to keep config.php file read only, set the option \"config_is_read_only\" to true in it. See %s" : "或者，如果您比較希望保留 config.php 的唯讀狀態，請在該設定檔中將 \"config_is_read_only\" 設定為 true。見%s",
|
|
|
+ "The files of the app %1$s were not replaced correctly. Make sure it is a version compatible with the server." : "應用程式 %1$s 中的檔案沒有被正確取代，請確認它的版本與伺服器相容。",
|
|
|
"Sample configuration detected" : "您目前正在使用範例設定",
|
|
|
"It has been detected that the sample configuration has been copied. This can break your installation and is unsupported. Please read the documentation before performing changes on config.php" : "您似乎直接複製了範例設定來使用，這樣的安裝很可能會無法運作，請閱讀說明文件後對 config.php 進行適當的修改",
|
|
|
"%1$s and %2$s" : "%1$s 和 %2$s",
|
|
|
@@ -21,6 +24,8 @@ OC.L10N.register(
|
|
|
"Following databases are supported: %s" : "支援下列資料庫： %s",
|
|
|
"The command line tool %s could not be found" : "找不到命令列工具指令 %s",
|
|
|
"The library %s is not available." : "套件庫 %s 無法使用",
|
|
|
+ "Library %1$s with a version higher than %2$s is required - available version %3$s." : "需要使用 %2$s 版以上的 %1$s 函式庫，目前可用的版本是 %3$s",
|
|
|
+ "Library %1$s with a version lower than %2$s is required - available version %3$s." : "需要使用 %2$s 版以下的 %1$s 函式庫，目前可用的版本是 %3$s",
|
|
|
"Following platforms are supported: %s" : "支援下列平台： %s",
|
|
|
"Server version %s or higher is required." : "需要伺服器版本 %s 或更高",
|
|
|
"Server version %s or lower is required." : "需要伺服器版本 %s 或更低",
|
|
|
@@ -98,13 +103,19 @@ OC.L10N.register(
|
|
|
"Sharing backend %s must implement the interface OCP\\Share_Backend" : "分享後端 %s 必須實作 OCP\\Share_Backend 界面",
|
|
|
"Sharing backend %s not found" : "找不到分享後端 %s",
|
|
|
"Sharing backend for %s not found" : "找不到 %s 的分享後端",
|
|
|
+ "%1$s shared »%2$s« with you and wants to add:" : "%1$s 與您分享了 %2$s ，且想要加入：",
|
|
|
+ "%1$s shared »%2$s« with you and wants to add" : "%1$s 與您分享了 %2$s ，且想要加入",
|
|
|
+ "»%s« added a note to a file shared with you" : "%s 在與您分享的檔案中加入了註解",
|
|
|
"Open »%s«" : "開啟 »%s«",
|
|
|
+ "%1$s via %2$s" : "%1$s 由 %2$s",
|
|
|
"You are not allowed to share %s" : "你不被允許分享 %s",
|
|
|
"Can’t increase permissions of %s" : "無法增加 %s 的權限",
|
|
|
"Files can’t be shared with delete permissions" : "無法分享具有刪除權限的檔案",
|
|
|
"Files can’t be shared with create permissions" : "無法分享具有新建權限的檔案",
|
|
|
"Expiration date is in the past" : "到期日為過去的日期",
|
|
|
"Can’t set expiration date more than %s days in the future" : "到期日不能設定為 %s 天以後的日期",
|
|
|
+ "%1$s shared »%2$s« with you" : "%1$s 與您分享了 %2$s",
|
|
|
+ "%1$s shared »%2$s« with you." : "%1$s 與您分享了 %2$s",
|
|
|
"Click the button below to open it." : "點下方連結開啟",
|
|
|
"The requested share does not exist anymore" : "該分享已經不存在",
|
|
|
"Could not find category \"%s\"" : "找不到分類：\"%s\"",
|
|
|
@@ -162,6 +173,7 @@ OC.L10N.register(
|
|
|
"Could not create user" : "無法建立使用者",
|
|
|
"User disabled" : "使用者已停用",
|
|
|
"Login canceled by app" : "應用程式取消了登入",
|
|
|
+ "App \"%1$s\" cannot be installed because the following dependencies are not fulfilled: %2$s" : "應用程式 \"%1$s\" 無法被安裝，缺少下列所需元件： %2$s",
|
|
|
"a safe home for all your data" : "您資料的安全屋",
|
|
|
"File is currently busy, please try again later" : "檔案目前忙碌中，請稍候再試",
|
|
|
"Can't read file" : "無法讀取檔案",
|
|
|
@@ -197,6 +209,10 @@ OC.L10N.register(
|
|
|
"Check the value of \"datadirectory\" in your configuration" : "請檢查您的設定檔中 \"datadirectory\" 的值",
|
|
|
"Your data directory is invalid" : "您的資料目錄無效",
|
|
|
"Ensure there is a file called \".ocdata\" in the root of the data directory." : "請確保資料目錄最上層有一個 \".ocdata\" 檔案",
|
|
|
+ "Action \"%s\" not supported or implemented." : "操作 \"%s\" 並未支援，或是尚未實作",
|
|
|
+ "Authentication failed, wrong token or provider ID given" : "認證失敗，提供了錯誤的 token 或是 provider ID",
|
|
|
+ "Parameters missing in order to complete the request. Missing Parameters: \"%s\"" : "欠缺完成請求所需的參數： \"%s\"",
|
|
|
+ "ID \"%1$s\" already used by cloud federation provider \"%2$s\"" : "ID \"%1$s\" 已經被另一個雲端聯盟供應者 \"%2$s\" 所使用",
|
|
|
"Could not obtain lock type %d on \"%s\"." : "無法取得鎖定：類型 %d ，檔案 %s",
|
|
|
"Storage unauthorized. %s" : "儲存空間未經授權。%s",
|
|
|
"Storage incomplete configuration. %s" : "儲存空間配置尚未完成。%s",
|
Nextcloud bot