1
0

zh_TW.json 17 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219
  1. { "translations": {
  2. "Cannot write into \"config\" directory!" : "無法寫入 \"config\" 目錄!",
  3. "This can usually be fixed by giving the webserver write access to the config directory" : "允許網頁伺服器寫入 \"config\" 目錄通常可以解決這個問題",
  4. "See %s" : "見 %s",
  5. "This can usually be fixed by giving the webserver write access to the config directory. See %s" : "允許網頁伺服器寫入 \"config\" 目錄通常可以解決這個問題,詳見 %s",
  6. "Sample configuration detected" : "偵測到範本設定",
  7. "It has been detected that the sample configuration has been copied. This can break your installation and is unsupported. Please read the documentation before performing changes on config.php" : "看來您直接複製了範本設定來使用,這可能會毀掉你的安裝,請閱讀說明文件後對 config.php 進行適當的修改",
  8. "%1$s and %2$s" : "%1$s 和 %2$s",
  9. "%1$s, %2$s and %3$s" : "%1$s, %2$s 和 %3$s",
  10. "PHP %s or higher is required." : "需要 PHP %s 或更高版本",
  11. "PHP with a version lower than %s is required." : "需要 PHP 版本低於 %s ",
  12. "%sbit or higher PHP required." : "%s 或需要更高階版本的php",
  13. "Following databases are supported: %s" : "支援下列資料庫: %s",
  14. "The command line tool %s could not be found" : "找不到命令列工具指令 %s",
  15. "The library %s is not available." : "套件庫 %s 無法使用",
  16. "Library %s with a version higher than %s is required - available version %s." : "需要套件庫 %s 版本高於 %s - 可使用的版本是 %s",
  17. "Library %s with a version lower than %s is required - available version %s." : "需要套件庫 %s 版本低於 %s - 可使用的版本是 %s",
  18. "Following platforms are supported: %s" : "支援下列平台: %s",
  19. "Server version %s or higher is required." : "需要伺服器版本 %s 或更高",
  20. "Server version %s or lower is required." : "需要伺服器版本 %s 或更低",
  21. "Unknown filetype" : "未知的檔案類型",
  22. "Invalid image" : "無效的圖片",
  23. "Avatar image is not square" : "頭像不是正方形",
  24. "today" : "今天",
  25. "tomorrow" : "明天",
  26. "yesterday" : "昨天",
  27. "_in %n day_::_in %n days_" : ["在 %n 天內"],
  28. "_%n day ago_::_%n days ago_" : ["%n 天前"],
  29. "next month" : "下個月",
  30. "last month" : "上個月",
  31. "_in %n month_::_in %n months_" : ["在 %n 月內"],
  32. "_%n month ago_::_%n months ago_" : ["%n 個月前"],
  33. "next year" : "明年",
  34. "last year" : "去年",
  35. "_%n year ago_::_%n years ago_" : ["%n 幾年前"],
  36. "_%n hour ago_::_%n hours ago_" : ["%n 小時前"],
  37. "_%n minute ago_::_%n minutes ago_" : ["%n 分鐘前"],
  38. "seconds ago" : "幾秒前",
  39. "Module with ID: %s does not exist. Please enable it in your apps settings or contact your administrator." : "名為 %s 的模組不存在,請在應用程式設定中啟用,或是聯絡系統管理員",
  40. "File name is a reserved word" : "檔案名稱是保留字",
  41. "File name contains at least one invalid character" : "檔案名稱含有不允許的字元",
  42. "File name is too long" : "檔案名稱太長",
  43. "Dot files are not allowed" : "不允許小數點開頭的檔案",
  44. "Empty filename is not allowed" : "不允許空白的檔名",
  45. "App \"%s\" cannot be installed because appinfo file cannot be read." : "應用程式 \"%s\" 無法安裝,因為無法讀取 appinfo 檔案。",
  46. "App \"%s\" cannot be installed because it is not compatible with this version of the server." : "應用程式 \"%s\" 無法安裝,因為該應用程式不相容於目前版本的伺服器。",
  47. "This is an automatically sent email, please do not reply." : "此為自動寄送的電子郵件,請不要回覆。",
  48. "Help" : "說明",
  49. "Apps" : "應用程式",
  50. "Settings" : "設定",
  51. "Log out" : "登出",
  52. "Users" : "使用者",
  53. "Unknown user" : "未知的使用者",
  54. "APCu" : "APCu",
  55. "Redis" : "Redis",
  56. "Basic settings" : "基本設定",
  57. "Sharing" : "分享",
  58. "Security" : "安全性",
  59. "Encryption" : "加密",
  60. "Additional settings" : "其他設定",
  61. "Tips & tricks" : "使用祕訣",
  62. "Personal info" : "個人資訊",
  63. "Sync clients" : "同步客戶端",
  64. "Unlimited" : "無限",
  65. "__language_name__" : "正體中文(臺灣)",
  66. "Verifying" : "驗證中",
  67. "Verifying …" : "驗證中…",
  68. "Verify" : "驗證",
  69. "%s enter the database username and name." : "%s 輸入資料庫名稱及使用者名稱",
  70. "%s enter the database username." : "%s 輸入資料庫使用者名稱",
  71. "%s enter the database name." : "%s 輸入資料庫名稱",
  72. "%s you may not use dots in the database name" : "%s 資料庫名稱不能包含小數點",
  73. "Oracle connection could not be established" : "無法建立 Oracle 資料庫連線",
  74. "Oracle username and/or password not valid" : "Oracle 用戶名和/或密碼無效",
  75. "PostgreSQL username and/or password not valid" : "PostgreSQL 用戶名和/或密碼無效",
  76. "You need to enter details of an existing account." : "您必須輸入現有帳號的資訊",
  77. "Mac OS X is not supported and %s will not work properly on this platform. Use it at your own risk! " : "不支援 Mac OS X 而且 %s 在這個平台上面無法正常運作,請自行衡量風險後使用!",
  78. "For the best results, please consider using a GNU/Linux server instead." : "請考慮使用 GNU/Linux 伺服器以獲得最佳體驗",
  79. "It seems that this %s instance is running on a 32-bit PHP environment and the open_basedir has been configured in php.ini. This will lead to problems with files over 4 GB and is highly discouraged." : "看起來 %s 是在 32 位元的 PHP 環境運行,並且 php.ini 中被設置了 open_basedir 參數,這將讓超過 4GB 的檔案操作發生問題,強烈建議您更改設定。",
  80. "Please remove the open_basedir setting within your php.ini or switch to 64-bit PHP." : "請移除 php.ini 中的 open_basedir 設定,或是改用 64 位元的 PHP",
  81. "Set an admin username." : "設定管理員帳號",
  82. "Set an admin password." : "設定管理員密碼",
  83. "Can't create or write into the data directory %s" : "無法建立或寫入資料目錄 %s",
  84. "Invalid Federated Cloud ID" : "無效的雲端聯邦 ID",
  85. "Sharing %s failed, because the backend does not allow shares from type %i" : "分享 %s失敗,不允許分享這樣的 %i 類別",
  86. "Sharing %s failed, because the file does not exist" : "分享 %s 失敗,因為檔案不存在",
  87. "You are not allowed to share %s" : "你不被允許分享 %s",
  88. "Sharing %s failed, because you can not share with yourself" : "分享 %s 失敗,不能分享給自己",
  89. "Sharing %s failed, because the user %s does not exist" : "分享 %s 失敗,因為使用者 %s 不存在",
  90. "Sharing %s failed, because the user %s is not a member of any groups that %s is a member of" : "分享 %s 失敗,使用者 %s 並不屬於該項目擁有者 %s 所隸屬的任何一個群組",
  91. "Sharing %s failed, because this item is already shared with %s" : "分享 %s 失敗,因為此項目目前已經與 %s 分享",
  92. "Sharing %s failed, because this item is already shared with user %s" : "分享 %s 失敗,因為此項目目前已經與 %s 分享",
  93. "Sharing %s failed, because the group %s does not exist" : "分享 %s 失敗,因為群組 %s 不存在",
  94. "Sharing %s failed, because %s is not a member of the group %s" : "分享 %s 失敗,因為 %s 不是群組 %s 的一員",
  95. "You need to provide a password to create a public link, only protected links are allowed" : "您必須為公開連結設定一組密碼,我們只允許受密碼保護的連結",
  96. "Sharing %s failed, because sharing with links is not allowed" : "分享 %s 失敗,因為目前不允許使用連結分享",
  97. "Not allowed to create a federated share with the same user" : "不允許與同一個使用者建立聯邦分享",
  98. "Sharing %s failed, could not find %s, maybe the server is currently unreachable." : "分享%s失敗,找不到%s,或許目前無法連線到該伺服器",
  99. "Share type %s is not valid for %s" : "分享類型 %s 對於 %s 來說無效",
  100. "Cannot set expiration date. Shares cannot expire later than %s after they have been shared" : "無法設定到期日,在分享之後,到期日不能設定為 %s 之後",
  101. "Cannot set expiration date. Expiration date is in the past" : "無法設定過去的日期為到期日",
  102. "Sharing backend %s must implement the interface OCP\\Share_Backend" : "分享後端 %s 必須實作 OCP\\Share_Backend 界面",
  103. "Sharing backend %s not found" : "找不到分享後端 %s",
  104. "Sharing backend for %s not found" : "找不到 %s 的分享後端",
  105. "Sharing failed, because the user %s is the original sharer" : "分享失敗,因為使用者 %s 即是原本的分享者",
  106. "Sharing %s failed, because the permissions exceed permissions granted to %s" : "分享 %s 失敗,因為權限設定超出了授權給 %s 的範圍",
  107. "Sharing %s failed, because resharing is not allowed" : "分享 %s 失敗,不允許重複分享",
  108. "Sharing %s failed, because the sharing backend for %s could not find its source" : "分享 %s 失敗,因為 %s 的分享後端找不到它的來源",
  109. "Sharing %s failed, because the file could not be found in the file cache" : "分享 %s 失敗,因為在快取中找不到該檔案",
  110. "Can’t increase permissions of %s" : "無法增加 %s 的權限",
  111. "Files can’t be shared with delete permissions" : "無法分享具有刪除權限的檔案",
  112. "Files can’t be shared with create permissions" : "無法分享具有新建權限的檔案",
  113. "Expiration date is in the past" : "到期日為過去的日期",
  114. "Can’t set expiration date more than %s days in the future" : "到期日不能設定為 %s 天以後的日期",
  115. "%s shared »%s« with you" : "%s 與您分享了 %s",
  116. "%s shared »%s« with you." : "%s 與您分享了 %s",
  117. "Click the button below to open it." : "點下方連結開啟",
  118. "Open »%s«" : "開啟 »%s«",
  119. "%s via %s" : "%s 經由 %s",
  120. "The requested share does not exist anymore" : "該分享已經不存在",
  121. "Could not find category \"%s\"" : "找不到分類:\"%s\"",
  122. "Sunday" : "週日",
  123. "Monday" : "週一",
  124. "Tuesday" : "週二",
  125. "Wednesday" : "週三",
  126. "Thursday" : "週四",
  127. "Friday" : "週五",
  128. "Saturday" : "週六",
  129. "Sun." : "日",
  130. "Mon." : "一",
  131. "Tue." : "二",
  132. "Wed." : "三",
  133. "Thu." : "四",
  134. "Fri." : "五",
  135. "Sat." : "六",
  136. "Su" : "日",
  137. "Mo" : "一",
  138. "Tu" : "二",
  139. "We" : "三",
  140. "Th" : "四",
  141. "Fr" : "五",
  142. "Sa" : "六",
  143. "January" : "一月",
  144. "February" : "二月",
  145. "March" : "三月",
  146. "April" : "四月",
  147. "May" : "五月",
  148. "June" : "六月",
  149. "July" : "七月",
  150. "August" : "八月",
  151. "September" : "九月",
  152. "October" : "十月",
  153. "November" : "十一月",
  154. "December" : "十二月",
  155. "Jan." : "一月",
  156. "Feb." : "二月",
  157. "Mar." : "三月",
  158. "Apr." : "四月",
  159. "May." : "五月",
  160. "Jun." : "六月",
  161. "Jul." : "七月",
  162. "Aug." : "八月",
  163. "Sep." : "九月",
  164. "Oct." : "十月",
  165. "Nov." : "十一月",
  166. "Dec." : "十二月",
  167. "Only the following characters are allowed in a username: \"a-z\", \"A-Z\", \"0-9\", and \"_.@-'\"" : "使用者名稱當中只能包含下列字元:\"a-z\", \"A-Z\", \"0-9\", 和 \"_.@-'\"",
  168. "A valid username must be provided" : "必須提供一個有效的用戶名",
  169. "Username contains whitespace at the beginning or at the end" : "用戶名的開頭或結尾有空白",
  170. "Username must not consist of dots only" : "使用者名稱不能只包含小數點",
  171. "A valid password must be provided" : "一定要提供一個有效的密碼",
  172. "The username is already being used" : "這個使用者名稱已經有人使用了",
  173. "Could not create user" : "無法建立使用者",
  174. "User disabled" : "使用者已停用",
  175. "Login canceled by app" : "應用程式取消了登入",
  176. "App \"%s\" cannot be installed because the following dependencies are not fulfilled: %s" : "應用程式 \"%s\" 無法被安裝,缺少下列所需元件: %s",
  177. "a safe home for all your data" : "您資料的安全屋",
  178. "File is currently busy, please try again later" : "檔案目前忙碌中,請稍候再試",
  179. "Can't read file" : "無法讀取檔案",
  180. "Application is not enabled" : "應用程式未啟用",
  181. "Authentication error" : "認證錯誤",
  182. "Token expired. Please reload page." : "Token 過期,請重新整理頁面。",
  183. "No database drivers (sqlite, mysql, or postgresql) installed." : "沒有安裝資料庫驅動程式 (sqlite, mysql, 或 postgresql)",
  184. "Cannot write into \"config\" directory" : "無法寫入 config 目錄",
  185. "Cannot write into \"apps\" directory" : "無法寫入 apps 目錄",
  186. "This can usually be fixed by giving the webserver write access to the apps directory or disabling the appstore in the config file. See %s" : "開放網頁伺服器存取 apps 目錄,或是在設定檔中關閉 appstore 功能通常就可以修正這個問題,詳見 %s",
  187. "Cannot create \"data\" directory" : "無法建立 \"data\" 目錄",
  188. "This can usually be fixed by giving the webserver write access to the root directory. See %s" : "開放網頁伺服器存取根目錄通常就可以修正這個問題,詳見 %s",
  189. "Permissions can usually be fixed by giving the webserver write access to the root directory. See %s." : "開放網頁伺服器存取根目錄通常就可以修正權限問題,詳見 %s",
  190. "Setting locale to %s failed" : "設定語系為 %s 失敗",
  191. "Please install one of these locales on your system and restart your webserver." : "請在系統中安裝這些語系的其中一個,然後重啓網頁伺服器",
  192. "Please ask your server administrator to install the module." : "請詢問系統管理員來安裝這些模組",
  193. "PHP module %s not installed." : "未安裝 PHP 模組 %s",
  194. "PHP setting \"%s\" is not set to \"%s\"." : "PHP 設定值 \"%s\" 沒有被設定為 \"%s\"",
  195. "Adjusting this setting in php.ini will make Nextcloud run again" : "調整 php.ini 中的設定,使 Nextcloud 重新運作",
  196. "mbstring.func_overload is set to \"%s\" instead of the expected value \"0\"" : "mbstring.func_overload 應該要被設定成 \"0\" 而不是目前的設定 \"%s\" ",
  197. "To fix this issue set <code>mbstring.func_overload</code> to <code>0</code> in your php.ini" : "為了修正這個問題,請到 php.ini 將 <code>mbstring.func_overload</code> 的值改為 <code>0</code>",
  198. "libxml2 2.7.0 is at least required. Currently %s is installed." : "libxml2 版本最低需求為 2.7.0。目前安裝版本為 %s 。",
  199. "To fix this issue update your libxml2 version and restart your web server." : "修正方式為更新您的 libxml2 為 2.7.0 以上版本,再重啟網頁伺服器。",
  200. "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式,這將會使幾個核心應用程式無法使用",
  201. "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "這大概是由快取或是加速器像是 Zend OPcache, eAccelerator 造成的",
  202. "PHP modules have been installed, but they are still listed as missing?" : "你已經安裝了指定的 PHP 模組,可是還是顯示為找不到嗎?",
  203. "Please ask your server administrator to restart the web server." : "請聯絡您的系統管理員重新啟動網頁伺服器",
  204. "PostgreSQL >= 9 required" : "需要 PostgreSQL 版本 >= 9",
  205. "Please upgrade your database version" : "請升級您的資料庫版本",
  206. "Please change the permissions to 0770 so that the directory cannot be listed by other users." : "請將該目錄權限設定為 0770 ,以免其他使用者讀取目錄列表",
  207. "Your data directory is readable by other users" : "您的資料目錄可以被其他使用者讀取",
  208. "Your data directory must be an absolute path" : "您的資料目錄必須為絕對路徑",
  209. "Check the value of \"datadirectory\" in your configuration" : "請檢查您的設定檔中 \"datadirectory\" 的值",
  210. "Your data directory is invalid" : "您的資料目錄無效",
  211. "Ensure there is a file called \".ocdata\" in the root of the data directory." : "請確保資料目錄最上層有一個 \".ocdata\" 檔案",
  212. "Could not obtain lock type %d on \"%s\"." : "無法取得鎖定:類型 %d ,檔案 %s",
  213. "Storage unauthorized. %s" : "儲存空間未經授權。%s",
  214. "Storage incomplete configuration. %s" : "儲存空間配置尚未完成。%s",
  215. "Storage connection error. %s" : "儲存空間連線錯誤。%s",
  216. "Storage is temporarily not available" : "儲存空間暫時無法使用",
  217. "Storage connection timeout. %s" : "儲存空間連線逾時。%s"
  218. },"pluralForm" :"nplurals=1; plural=0;"
  219. }