Domovská stránka Prehľadávať Pomoc
Prihlásiť sa
RISCI_ATOM
/
reform
zrkadlo https://github.com/mntmn/reform.git
1
0
Fork 0
Súbory Issues 0 Wiki
Branch: reform2
Branche Tagy
reform
/
handbook
/
source
/
case
/
index.rst

index.rst 2.3 KB
Permanentný odkaz História Raw

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667 
  1. The Case
    2. 

  2. ========
    3. 

  3. 

  4. Reform has 9 case parts:
    5. 

  5. 

  6. Main Box
    7. 

  7. --------
    8. 

  8. 

  9. .. image:: ports.pdf
    10. 

  10.            
    11. 

  11. The main box contains most of the electronics:
    12. 

  12. 

  13. - Reform Motherboard, exposing ports through openings on the left
    14. 

  14. - Power switch/cable assembly, connecting to motherboard header J22
    15. 

  15. - LiFePo4 battery, connecting to header J33
    16. 

  16. - Reform Keyboard, connecting to header J12 (internal USB)
    17. 

  17. - Reform Trackball, connecting to header J9 (internal USB)
    18. 

  18. 

  19. Main Box Top
    20. 

  20. ------------
    21. 

  21. 

  22. .. image:: mainbox_top.pdf
    23. 

  23. 

  24. The main box top is pressed onto the main box to close it from the top. It acts as a palm rest and bezel for the keyboard and trackball. The keyboard is slided into this part's keyboard slot from the right.
    25. 

  25. 

  26. Screen Back
    27. 

  27. -----------
    28. 

  28. 

  29. .. image:: screen_back.pdf
    30. 

  30. 

  31. The display is mounted on the screen back with M2x4 screws. The left and right hinges are mounted in the bottom left and right corners with M4x5 screws.
    32. 

  32. 

  33. Screen Front
    34. 

  34. ------------
    35. 

  35. 

  36. .. image:: screen_front.pdf
    37. 

  37.            
    38. 

  38. This part serves as a bezel for the display and holds the case closing strap. It also has a magnet attached to it on the lower left that is sensed by the lid sensor. The screen front is mounted to the back with M3x6 screws.
    39. 

  39. 

  40. Screen Support
    41. 

  41. --------------
    42. 

  42. 

  43. .. image:: screen_support.pdf
    44. 

  44.            
    45. 

  45. The screen support connects the main box to the screen via the hinges. The display's LVDS (motherboard header J14) and power cable (motherboard header J26) is passed through this part, as well as the lid sensor cable (J34).
    46. 

  46. 

  47. Screen Support Lid
    48. 

  48. ------------------
    49. 

  49. 

  50. .. image:: screen_support_lid.pdf
    51. 

  51.            
    52. 

  52. This is a thin part covering the screen support's top. On the left, it contains a pocket for the hall effect sensor that detects the magnet on the screen front. The sensor signals opening and closing of the lid.
    53. 

  53. 

  54. Keyboard Closure
    55. 

  55. ----------------
    56. 

  56. 

  57. This part is inserted into the main box top after the keyboard to secure it in place.
    58. 

  58. 

  59. Grid Plate
    60. 

  60. ----------
    61. 

  61. 

  62. This lasercut acrylic part is sandwiched between the main box' inner top and the motherboard. It has the mounting holes for the motherboard and other internal devices and isolates the motherboard from the keyboard.
    63. 

  63. 

  64. Bottom Plate
    65. 

  65. ------------
    66. 

  66. 

  67. The bottom plate closes the main box from the bottom. It contains mounting holes for the fan and vent holes for the fan's air intake. The fan is connected to motherboard header J15 before screwing in the plate.
    68.