What is Sydent? =============== Sydent is an `identity server `_ for the `Matrix communications protocol `_. It allows Matrix users to prove that they own an email address or phone number, and allows _other_ Matrix users to look them up using that email address or phone number. Do I need to run Sydent to run my own homeserver? ------------------------------------------------- Short answer: **no**. Medium answer: **probably not**. Most homeservers and clients use the Sydent instance run by `matrix.org`, or use no identity server whatsoever. Longer answer: if you want to allow user lookup via emails and phone numbers in a private federation of multiple homeservers, Sydent _might_ be useful for you. If you want your homeserver to be able to verify phone numbers via SMS and you have an API token for the `OpenMarket HTTP SMS API `_, then Sydent might be useful for you. Installation ============ Installing the system dependencies ---------------------------------- To install Sydent's dependencies on a Debian-based system, run:: sudo apt-get install build-essential python3-dev libffi-dev \ sqlite3 libssl-dev python3-virtualenv libxslt1-dev From here, you can either install Sydent by using a PyPI release, or by recreating Sydent's locked runtime environment. Installing the latest Sydent release from PyPI ---------------------------------------------- To create the virtual environment in which Sydent will run:: virtualenv -p python3 ~/.sydent source ~/.sydent/bin/activate pip install --upgrade pip pip install --upgrade setuptools Sydent and its dependencies can be installed using ``pip`` by running:: pip install matrix-sydent With the virtualenv activated, you can run Sydent using:: python -m sydent.sydent Installing from source ~~~~~~~~~~~~~~~~~~~~~~ Alternatively, Sydent can be installed using ``poetry`` from a local git checkout. First install `poetry`. See `poetry's documentation `_ for details; we recommend installing via `pipx`. Once that's done:: git clone https://github.com/matrix-org/sydent.git cd sydent poetry install --no-dev # For development, pull in extra tools with # poetry install To start Sydent:: poetry run sydent Running Sydent ============== When Sydent is first run, it will create a configuration file in ``sydent.conf`` with some defaults. If a setting is defined in both the ``[DEFAULT]`` section and another section in the configuration file, then the value in the other section is used. You'll most likely want to change the server name (``server.name``) and specify an email server (look for the settings starting with ``email.``). By default, Sydent will listen on ``0.0.0.0:8090``. This can be changed by changing the values for the configuration settings ``clientapi.http.bind_address`` and ``clientapi.http.port``. Sydent uses SQLite as its database backend. By default, it will create the database as ``sydent.db`` in its working directory. The name can be overridden by modifying the ``db.file`` configuration option. Sydent is known to be working with SQLite version 3.16.2 and later. Listening for HTTPS connections ------------------------------- Most homeservers and clients will expect identity servers to be reachable using HTTPS. Sydent does not currently support listening for HTTPS connection by itself. Instead, it is recommended to use a reverse proxy to proxy requests from homeservers and clients to Sydent. It is then possible to have this reverse proxy serve Sydent's API over HTTPS. When using a reverse proxy, it is recommended to limit the requests proxied to Sydent to ones which paths start with ``/_matrix/identity`` for security reasons. An exception to this is Sydent's internal replication API, see ``_. SMS originators --------------- Defaults for SMS originators will not be added to the generated config file, these should be added to the ``[sms]`` section of that config file in the form:: originators. = : Where country code is the numeric country code, or ``default`` to specify the originator used for countries not listed. For example, to use a selection of long codes for the US/Canada, a short code for the UK and an alphanumertic originator for everywhere else:: originators.1 = long:12125552368,long:12125552369 originators.44 = short:12345 originators.default = alpha:Matrix Docker ====== A Dockerfile is provided for sydent. To use it, run ``docker build -t sydent .`` in a sydent checkout. To run it, use ``docker run --env=SYDENT_SERVER_NAME=my-sydent-server -p 8090:8090 sydent``. Persistent data --------------- By default, all data is stored in ``/data``. To persist this to disk, bind `/data` to a Docker volume. .. code-block:: shell docker volume create sydent-data docker run ... --mount type=volume,source=sydent-data,destination=/data sydent But you can also bind a local directory to the container. However, you then have to pay attention to the file permissions. .. code-block:: shell mkdir /path/to/sydent-data chown 993:993 /path/to/sydent-data docker run ... --mount type=bind,source=/path/to/sydent-data,destination=/data sydent Environment variables --------------------- .. warning:: These variables are only taken into account at first start and are written to the configuration file. +--------------------+-----------------+-----------------------+ | Variable Name | Sydent default | Dockerfile default | +====================+=================+=======================+ | SYDENT_SERVER_NAME | *empty* | *empty* | +--------------------+-----------------+-----------------------+ | SYDENT_CONF | ``sydent.conf`` | ``/data/sydent.conf`` | +--------------------+-----------------+-----------------------+ | SYDENT_PID_FILE | ``sydent.pid`` | ``/data/sydent.pid`` | +--------------------+-----------------+-----------------------+ | SYDENT_DB_PATH | ``sydent.db`` | ``/data/sydent.db`` | +--------------------+-----------------+-----------------------+ Internal bind and unbind API ============================ It is possible to enable an internal API which allows for binding and unbinding between identifiers and matrix IDs without any validation. This is open to abuse, so is disabled by default, and when it is enabled, is available only on a separate socket which is bound to ``localhost`` by default. To enable it, configure the port in the config file. For example:: [http] internalapi.http.port = 8091 To change the address to which that API is bound, set the ``internalapi.http.bind_address`` configuration setting in the ``[http]`` section, for example:: [http] internalapi.http.port = 8091 internalapi.http.bind_address = 192.168.0.18 As already mentioned above, this is open to abuse, so make sure this address is not publicly accessible. To use bind:: curl -XPOST 'http://localhost:8091/_matrix/identity/internal/bind' -H "Content-Type: application/json" -d '{"address": "matthew@arasphere.net", "medium": "email", "mxid": "@matthew:matrix.org"}' The response has the same format as `/_matrix/identity/api/v1/3pid/bind `_. To use unbind:: curl -XPOST 'http://localhost:8091/_matrix/identity/internal/unbind' -H "Content-Type: application/json" -d '{"address": "matthew@arasphere.net", "medium": "email", "mxid": "@matthew:matrix.org"}' The response has the same format as `/_matrix/identity/api/v1/3pid/unbind `_. Replication =========== It is possible to configure a mesh of Sydent instances which replicate identity bindings between each other. See ``_. Discussion ========== Matrix room: `#sydent:matrix.org `_.