Make systemd-with-workers doc official (#7234)

Simplify and update this documentation, and make it part of the core dist.

changelog.d/7234.doc

@@ -0,0 +1 @@
+Update the contributed documentation on managing synapse workers with systemd, and bring it into the core distribution.

contrib/systemd-with-workers/README.md

@@ -1,150 +1,2 @@
-# Setup Synapse with Workers and Systemd
-
-This is a setup for managing synapse with systemd including support for
-managing workers. It provides a `matrix-synapse`, as well as a
-`matrix-synapse-worker@` service for any workers you require. Additionally to
-group the required services it sets up a `matrix.target`. You can use this to
-automatically start any bot- or bridge-services. More on this in
-[Bots and Bridges](#bots-and-bridges).
-
-See the folder [system](system) for any service and target files.
-
-The folder [workers](workers) contains an example configuration for the
-`federation_reader` worker. Pay special attention to the name of the
-configuration file. In order to work with the `matrix-synapse-worker@.service`
-service, it needs to have the exact same name as the worker app.
-
-This setup expects neither the homeserver nor any workers to fork. Forking is
-handled by systemd.
-
-## Setup
-
-1. Adjust your matrix configs. Make sure that the worker config files have the
-exact same name as the worker app. Compare `matrix-synapse-worker@.service` for
-why. You can find an example worker config in the [workers](workers) folder. See
-below for relevant settings in the `homeserver.yaml`.
-2. Copy the `*.service` and `*.target` files in [system](system) to
-`/etc/systemd/system`.
-3. `systemctl enable matrix-synapse.service` this adds the homeserver
-app to the `matrix.target`
-4. *Optional.* `systemctl enable
-matrix-synapse-worker@federation_reader.service` this adds the federation_reader
-app to the `matrix-synapse.service`
-5. *Optional.* Repeat step 4 for any additional workers you require.
-6. *Optional.* Add any bots or bridges by enabling them.
-7. Start all matrix related services via `systemctl start matrix.target`
-8. *Optional.* Enable autostart of all matrix related services on system boot
-via `systemctl enable matrix.target`
-
-## Usage
-
-After you have setup you can use the following commands to manage your synapse
-installation:
-
-```
-# Start matrix-synapse, all workers and any enabled bots or bridges.
-systemctl start matrix.target
-
-# Restart matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl restart matrix-synapse.service
-
-# Stop matrix-synapse and all workers (not necessarily restarting bots
-# or bridges, see "Bots and Bridges")
-systemctl stop matrix-synapse.service
-
-# Restart a specific worker (i. e. federation_reader), the homeserver is
-# unaffected by this.
-systemctl restart matrix-synapse-worker@federation_reader.service
-
-# Add a new worker (assuming all configs are setup already)
-systemctl enable matrix-synapse-worker@federation_writer.service
-systemctl restart matrix-synapse.service
-```
-
-## The Configs
-
-Make sure the `worker_app` is set in the `homeserver.yaml` and it does not fork.
-
-```
-worker_app: synapse.app.homeserver 
-daemonize: false
-```
-
-None of the workers should fork, as forking is handled by systemd. Hence make
-sure this is present in all worker config files.
-
-```
-worker_daemonize: false
-```
-
-The config files of all workers are expected to be located in
-`/etc/matrix-synapse/workers`. If you want to use a different location you have
-to edit the provided `*.service` files accordingly.  
-
-## Bots and Bridges
-
-Most bots and bridges do not care if the homeserver goes down or is restarted.
-Depending on the implementation this may crash them though. So look up the docs
-or ask the community of the specific bridge or bot you want to run to make sure
-you choose the correct setup.
-
-Whichever configuration you choose, after the setup the following will enable
-automatically starting (and potentially restarting) your bot/bridge with the
-`matrix.target`.
-
-```
-systemctl enable <yourBotOrBridgeName>.service
-```
-
-**Note** that from an inactive synapse the bots/bridges will only be started with
-synapse if you start the `matrix.target`, not if you start the
-`matrix-synapse.service`. This is on purpose. Think of `matrix-synapse.service`
-as *just* synapse, but `matrix.target` being anything matrix related, including
-synapse and any and all enabled bots and bridges.
-
-### Start with synapse but ignore synapse going down
-
-If the bridge can handle shutdowns of the homeserver you'll want to install the
-service in the `matrix.target` and optionally add a
-`After=matrix-synapse.service` dependency to have the bot/bridge start after
-synapse on starting everything.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Optional, this will only ensure that if you start everything, synapse will
-# be started before the bot/bridge will be started.
-After=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```
-
-### Stop/restart when synapse stops/restarts
-
-If the bridge can't handle shutdowns of the homeserver you'll still want to
-install the service in the `matrix.target` but also have to specify the
-`After=matrix-synapse.service` *and* `BindsTo=matrix-synapse.service`
-dependencies to have the bot/bridge stop/restart with synapse.
-
-In this case the service file should look like this.
-
-```
-[Unit]
-# ...
-# Mandatory
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-# ...
-
-[Install]
-WantedBy=matrix.target
-```
+The documentation for using systemd to manage synapse workers is now part of
+the main synapse distribution. See [docs/systemd-with-workers](../../docs/systemd-with-workers).

contrib/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -1,19 +0,0 @@
-[Unit]
-Description=Synapse Matrix Worker
-After=matrix-synapse.service
-BindsTo=matrix-synapse.service
-
-[Service]
-Type=notify
-NotifyAccess=main
-User=matrix-synapse
-WorkingDirectory=/var/lib/matrix-synapse
-EnvironmentFile=/etc/default/matrix-synapse
-ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.%i --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
-ExecReload=/bin/kill -HUP $MAINPID
-Restart=always
-RestartSec=3
-SyslogIdentifier=matrix-synapse-%i
-
-[Install]
-WantedBy=matrix-synapse.service

contrib/systemd-with-workers/system/matrix.target

@@ -1,7 +0,0 @@
-[Unit]
-Description=Contains matrix services like synapse, bridges and bots
-After=network.target
-AllowIsolate=no
-
-[Install]
-WantedBy=multi-user.target

docs/systemd-with-workers/README.md

@@ -0,0 +1,67 @@
+# Setting up Synapse with Workers and Systemd
+
+This is a setup for managing synapse with systemd, including support for
+managing workers. It provides a `matrix-synapse` service for the master, as
+well as a `matrix-synapse-worker@` service template for any workers you
+require. Additionally, to group the required services, it sets up a
+`matrix-synapse.target`.
+
+See the folder [system](system) for the systemd unit files.
+
+The folder [workers](workers) contains an example configuration for the
+`federation_reader` worker.
+
+## Synapse configuration files
+
+See [workers.md](../workers.md) for information on how to set up the
+configuration files and reverse-proxy correctly. You can find an example worker
+config in the [workers](workers) folder.
+
+Systemd manages daemonization itself, so ensure that none of the configuration
+files set either `daemonize` or `worker_daemonize`.
+
+The config files of all workers are expected to be located in
+`/etc/matrix-synapse/workers`. If you want to use a different location, edit
+the provided `*.service` files accordingly.
+
+There is no need for a separate configuration file for the master process.
+
+## Set up
+
+1. Adjust synapse configuration files as above.
+1. Copy the `*.service` and `*.target` files in [system](system) to
+`/etc/systemd/system`.
+1. Run `systemctl deamon-reload` to tell systemd to load the new unit files.
+1. Run `systemctl enable matrix-synapse.service`. This will configure the
+synapse master process to be started as part of the `matrix-synapse.target`
+target.
+1. For each worker process to be enabled, run `systemctl enable
+matrix-synapse-worker@<worker_name>.service`. For each `<worker_name>`, there
+should be a corresponding configuration file
+`/etc/matrix-synapse/workers/<worker_name>.yaml`.
+1. Start all the synapse processes with `systemctl start matrix-synapse.target`.
+1. Tell systemd to start synapse on boot with `systemctl enable matrix-synapse.target`/
+
+## Usage
+
+Once the services are correctly set up, you can use the following commands
+to manage your synapse installation:
+
+```sh
+# Restart Synapse master and all workers
+systemctl restart matrix-synapse.target
+
+# Stop Synapse and all workers
+systemctl stop matrix-synapse.target
+
+# Restart the master alone
+systemctl start matrix-synapse.service
+
+# Restart a specific worker (eg. federation_reader); the master is
+# unaffected by this.
+systemctl restart matrix-synapse-worker@federation_reader.service
+
+# Add a new worker (assuming all configs are set up already)
+systemctl enable matrix-synapse-worker@federation_writer.service
+systemctl restart matrix-synapse.target
+```

docs/systemd-with-workers/system/matrix-synapse-worker@.service

@@ -0,0 +1,20 @@
+[Unit]
+Description=Synapse %i
+
+# This service should be restarted when the synapse target is restarted.
+PartOf=matrix-synapse.target
+
+[Service]
+Type=notify
+NotifyAccess=main
+User=matrix-synapse
+WorkingDirectory=/var/lib/matrix-synapse
+EnvironmentFile=/etc/default/matrix-synapse
+ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.generic_worker --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=always
+RestartSec=3
+SyslogIdentifier=matrix-synapse-%i
+
+[Install]
+WantedBy=matrix-synapse.target

contrib/systemd-with-workers/system/matrix-synapse.service → docs/systemd-with-workers/system/matrix-synapse.service

@@ -1,5 +1,8 @@
 [Unit]
-Description=Synapse Matrix Homeserver
+Description=Synapse master
+
+# This service should be restarted when the synapse target is restarted.
+PartOf=matrix-synapse.target
 
 [Service]
 Type=notify
@@ -15,4 +18,4 @@ RestartSec=3
 SyslogIdentifier=matrix-synapse
 
 [Install]
-WantedBy=matrix.target
+WantedBy=matrix-synapse.target

docs/systemd-with-workers/system/matrix-synapse.target

@@ -0,0 +1,6 @@
+[Unit]
+Description=Synapse parent target
+After=network.target
+
+[Install]
+WantedBy=multi-user.target

contrib/systemd-with-workers/workers/federation_reader.yaml → docs/systemd-with-workers/workers/federation_reader.yaml

@@ -10,5 +10,4 @@ worker_listeners:
       resources:
           - names: [federation]
 
-worker_daemonize: false
 worker_log_config: /etc/matrix-synapse/federation-reader-log.yaml

docs/workers.md

@@ -52,24 +52,20 @@ synapse process.)
 
 You then create a set of configs for the various worker processes.  These
 should be worker configuration files, and should be stored in a dedicated
-subdirectory, to allow synctl to manipulate them. An additional configuration
-for the master synapse process will need to be created because the process will
-not be started automatically. That configuration should look like this:
-
-    worker_app: synapse.app.homeserver
-    daemonize: true
+subdirectory, to allow synctl to manipulate them.
 
 Each worker configuration file inherits the configuration of the main homeserver
 configuration file.  You can then override configuration specific to that worker,
 e.g. the HTTP listener that it provides (if any); logging configuration; etc.
 You should minimise the number of overrides though to maintain a usable config.
 
-You must specify the type of worker application (`worker_app`). The currently
-available worker applications are listed below. You must also specify the
-replication endpoints that it's talking to on the main synapse process.
-`worker_replication_host` should specify the host of the main synapse,
-`worker_replication_port` should point to the TCP replication listener port and
-`worker_replication_http_port` should point to the HTTP replication port.
+In the config file for each worker, you must specify the type of worker
+application (`worker_app`). The currently available worker applications are
+listed below. You must also specify the replication endpoints that it's talking
+to on the main synapse process.  `worker_replication_host` should specify the
+host of the main synapse, `worker_replication_port` should point to the TCP
+replication listener port and `worker_replication_http_port` should point to
+the HTTP replication port.
 
 Currently, the `event_creator` and `federation_reader` workers require specifying
 `worker_replication_http_port`.
@@ -90,8 +86,6 @@ For instance:
          - names:
            - client
 
-    worker_daemonize: True
-    worker_pid_file: /home/matrix/synapse/synchrotron.pid
     worker_log_config: /home/matrix/synapse/config/synchrotron_log_config.yaml
 
 ...is a full configuration for a synchrotron worker instance, which will expose a
@@ -101,7 +95,31 @@ by the main synapse.
 Obviously you should configure your reverse-proxy to route the relevant
 endpoints to the worker (`localhost:8083` in the above example).
 
-Finally, to actually run your worker-based synapse, you must pass synctl the -a
+Finally, you need to start your worker processes. This can be done with either
+`synctl` or your distribution's preferred service manager such as `systemd`. We
+recommend the use of `systemd` where available: for information on setting up
+`systemd` to start synapse workers, see
+[systemd-with-workers](systemd-with-workers). To use `synctl`, see below.
+
+### Using synctl
+
+If you want to use `synctl` to manage your synapse processes, you will need to
+create an an additional configuration file for the master synapse process. That
+configuration should look like this:
+
+```yaml
+worker_app: synapse.app.homeserver
+```
+
+Additionally, each worker app must be configured with the name of a "pid file",
+to which it will write its process ID when it starts. For example, for a
+synchrotron, you might write:
+
+```yaml
+worker_pid_file: /home/matrix/synapse/synchrotron.pid
+```
+
+Finally, to actually run your worker-based synapse, you must pass synctl the `-a`
 commandline option to tell it to operate on all the worker configurations found
 in the given directory, e.g.: