synapse/docs/turn-howto.md

Overview

This document explains how to enable VoIP relaying on your Home Server with TURN.

The synapse Matrix Home Server supports integration with TURN server via the TURN server REST API. This allows the Home Server to generate credentials that are valid for use on the TURN server through the use of a secret shared between the Home Server and the TURN server.

The following sections describe how to install coturn (which implements the TURN REST API) and integrate it with synapse.

Requirements

For TURN relaying with coturn to work, it must be hosted on a server/endpoint with a public IP.

Hosting TURN behind a NAT (even with appropriate port forwarding) is known to cause issues and to often not work.

coturn setup

Initial installation

The TURN daemon coturn is available from a variety of sources such as native package managers, or installation from source.

Debian installation

Just install the debian package:

apt install coturn

This will install and start a systemd service called coturn.

Source installation

1. Download the latest release from github. Unpack it and cd into the directory.

2. Configure it:

   ./configure
   

   You may need to install libevent2: if so, you should do so in the way recommended by your operating system. You can ignore warnings about lack of database support: a database is unnecessary for this purpose.

3. Build and install it:

   make
   make install
   

Configuration

1. Create or edit the config file in /etc/turnserver.conf. The relevant lines, with example values, are:

   use-auth-secret
   static-auth-secret=[your secret key here]
   realm=turn.myserver.org
   

   See turnserver.conf for explanations of the options. One way to generate the static-auth-secret is with pwgen:

   pwgen -s 64 1
   

2. Consider your security settings. TURN lets users request a relay which will connect to arbitrary IP addresses and ports. The following configuration is suggested as a minimum starting point:

   # VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay.
   no-tcp-relay
   
   # don't let the relay ever try to connect to private IP address ranges within your network (if any)
   # given the turn server is likely behind your firewall, remember to include any privileged public IPs too.
   denied-peer-ip=10.0.0.0-10.255.255.255
   denied-peer-ip=192.168.0.0-192.168.255.255
   denied-peer-ip=172.16.0.0-172.31.255.255
   
   # special case the turn server itself so that client->TURN->TURN->client flows work
   allowed-peer-ip=10.0.0.1
   
   # consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS.
   user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user.
   total-quota=1200
   

3. Also consider supporting TLS/DTLS. To do this, add the following settings to turnserver.conf:

   # TLS certificates, including intermediate certs.
   # For Let's Encrypt certificates, use `fullchain.pem` here.
   cert=/path/to/fullchain.pem
   
   # TLS private key file
   pkey=/path/to/privkey.pem
   

4. Ensure your firewall allows traffic into the TURN server on the ports you've configured it to listen on (By default: 3478 and 5349 for the TURN(s) traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535 for the UDP relay.)

5. (Re)start the turn server:

   • If you used the Debian package (or have set up a systemd unit yourself):

     systemctl restart coturn
     

   • If you installed from source:

     bin/turnserver -o
     

Synapse setup

Your home server configuration file needs the following extra keys:

1. "turn_uris": This needs to be a yaml list of public-facing URIs for your TURN server to be given out to your clients. Add separate entries for each transport your TURN server supports.
2. "turn_shared_secret": This is the secret shared between your Home server and your TURN server, so you should set it to the same string you used in turnserver.conf.
3. "turn_user_lifetime": This is the amount of time credentials generated by your Home Server are valid for (in milliseconds). Shorter times offer less potential for abuse at the expense of increased traffic between web clients and your home server to refresh credentials. The TURN REST API specification recommends one day (86400000).
4. "turn_allow_guests": Whether to allow guest users to use the TURN server. This is enabled by default, as otherwise VoIP will not work reliably for guests. However, it does introduce a security risk as it lets guests connect to arbitrary endpoints without having gone through a CAPTCHA or similar to register a real account.

As an example, here is the relevant section of the config file for matrix.org:

turn_uris: [ "turn:turn.matrix.org:3478?transport=udp", "turn:turn.matrix.org:3478?transport=tcp" ]
turn_shared_secret: "n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons"
turn_user_lifetime: 86400000
turn_allow_guests: True

After updating the homeserver configuration, you must restart synapse:

• If you use synctl:

  cd /where/you/run/synapse
  ./synctl restart
  

• If you use systemd:

  systemctl restart synapse.service
  

..and your Home Server now supports VoIP relaying!