wolfssl/scripts/trusted_peer.test

#!/bin/sh

# trusted_peer.test
# copyright wolfSSL 2016

# getting unique port is modeled after resume.test script
# need a unique port since may run the same time as testsuite
# use server port zero hack to get one
port=0
no_pid=-1
server_pid=$no_pid
counter=0
# let's use absolute path to a local dir (make distcheck may be in sub dir)
# also let's add some randomness by adding pid in case multiple 'make check's
# per source tree
ready_file=`pwd`/wolfssl_tp_ready$$

# variables for certs so can use RSA or ECC
client_cert=`pwd`/certs/client-cert.pem
client_ca=`pwd`/certs/ca-cert.pem
client_key=`pwd`/certs/client-key.pem
ca_key=`pwd`/certs/ca-key.pem
server_cert=`pwd`/certs/server-cert.pem
server_key=`pwd`/certs/server-key.pem
combined_cert=`pwd`/certs/client_combined.pem
wrong_ca=`pwd`/certs/wolfssl-website-ca.pem
wrong_cert=`pwd`/certs/server-revoked-cert.pem

echo "ready file $ready_file"

create_port() {
    while [ ! -s $ready_file -a "$counter" -lt 20 ]; do
        echo -e "waiting for ready file..."
        sleep 0.1
        counter=$((counter+ 1))
    done

    if test -e $ready_file; then
        echo -e "found ready file, starting client..."

        # get created port 0 ephemeral port
        port=`cat $ready_file`
    else
        echo -e "NO ready file ending test..."
        do_cleanup
    fi
}

remove_ready_file() {
    if test -e $ready_file; then
        echo -e "removing existing ready file"
    rm $ready_file
    fi
}

do_cleanup() {
    echo "in cleanup"

    if  [ $server_pid != $no_pid ]
    then
        echo "killing server"
        kill -9 $server_pid
    fi
    remove_ready_file
}

do_trap() {
    echo "got trap"
    do_cleanup
    exit -1
}

trap do_trap INT TERM

[ ! -x ./examples/client/client ] && echo -e "\n\nClient doesn't exist" && exit 1

# Look for if RSA and/or ECC is enabled and adjust certs/keys
ciphers=`./examples/client/client -e`
if [[  $ciphers != *"RSA"* ]]; then
    if [[ $ciphers == *"ECDSA"* ]]; then
        client_cert=`pwd`/certs/client-ecc-cert.pem
        client_ca=`pwd`/certs/server-ecc.pem
        client_key=`pwd`/certs/ecc-client-key.pem
        ca_key=`pwd`/certs/ecc-key.pem
        server_cert=`pwd`/certs/server-ecc.pem
        server_key=`pwd`/certs/ecc-key.pem
        wrong_ca=`pwd`/certs/server-ecc-comp.pem
        wrong_cert=`pwd`/certs/server-ecc-comp.pem
    else
        echo "configure options not set up for test. No RSA or ECC"
        exit 0
    fi
fi

# CRL list not set up for tests
crl_test=`./examples/client/client -h`
if [[ $crl_test == *"-C "* ]]; then
    echo "test not set up to run with CRL"
    exit 0
fi

# Test for trusted peer certs build
echo ""
echo "Checking built with trusted peer certs "
echo "-----------------------------------------------------"
port=0
remove_ready_file
./examples/server/server -E $client_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -p $port
RESULT=$?
remove_ready_file
# if fail here then is a settings issue so return 0
if [ $RESULT -ne 0 ]; then
    echo -e "\n\nTrusted peer certs not enabled \"WOLFSSL_TRUST_PEER_CERT\""
    do_cleanup
    exit 0
fi
echo ""

# Test that using no CA's and only trusted peer certs works
echo "Server and Client relying on trusted peer cert loaded"
echo "-----------------------------------------------------"
port=0
./examples/server/server -A $wrong_ca -E $client_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $wrong_ca -E $server_cert -c $client_cert -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -ne 0 ]; then
    echo -e "\nServer and Client trusted peer cert failed!"
    do_cleanup
    exit 1
fi
echo ""

# Test that using server trusted peer certs works
echo "Server relying on trusted peer cert loaded"
echo "-----------------------------------------------------"
port=0
./examples/server/server -A $wrong_ca -E $client_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -c $client_cert -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -ne 0 ]; then
    echo -e "\nServer trusted peer cert test failed!"
    do_cleanup
    exit 1
fi
echo ""

# Test that using client trusted peer certs works
echo "Client relying on trusted peer cert loaded"
echo "-----------------------------------------------------"
port=0
./examples/server/server -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $wrong_ca -E $server_cert -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -ne 0 ]; then
    echo -e "\nClient trusted peer cert test failed!"
    do_cleanup
    exit 1
fi
echo ""

# Test that client fall through to CA works
echo "Client fall through to loaded CAs"
echo "-----------------------------------------------------"
port=0
./examples/server/server -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -E $wrong_cert -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -ne 0 ]; then
    echo -e "\nClient trusted peer cert fall through to CA test failed!"
    do_cleanup
    exit 1
fi
echo ""

# Test that client can fail
# check if using ECC client example is hard coded to load correct ECC ca so skip
if [[ $wrong_ca != *"ecc"* ]]; then
echo "Client wrong CA and wrong trusted peer cert loaded"
echo "-----------------------------------------------------"
port=0
./examples/server/server -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $wrong_ca -E $wrong_cert -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -eq 0 ]; then
    echo -e "\nClient trusted peer cert test failed!"
    do_cleanup
    exit 1
fi
echo ""
fi

# Test that server can fail
echo "Server wrong CA and wrong trusted peer cert loaded"
echo "-----------------------------------------------------"
port=0
./examples/server/server -A $wrong_ca -E $wrong_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -eq 0 ]; then
    echo -e "\nServer trusted peer cert test failed!"
    do_cleanup
    exit 1
fi
echo ""

# Test that server fall through to CA works
echo "Server fall through to loaded CAs"
echo "-----------------------------------------------------"
port=0
./examples/server/server -E $wrong_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -p $port
RESULT=$?
remove_ready_file
if [ $RESULT -ne 0 ]; then
    echo -e "\nServer trusted peer cert fall through to CA test failed!"
    do_cleanup
    exit 1
fi
echo ""

# test loading multiple certs
echo "Server loading multiple trusted peer certs"
echo "Test two success cases and one fail case"
echo "-----------------------------------------------------"
port=0
cat $client_cert $client_ca > $combined_cert
./examples/server/server -i -A $wrong_ca -E $combined_cert -c $server_cert -k $server_key -R $ready_file -p $port &
server_pid=$!
create_port
./examples/client/client -A $client_ca -c $client_cert -k $client_key -p $port
RESULT=$?
if [ $RESULT -ne 0 ]; then
    echo -e "\nServer load multiple trusted peer certs failed!"
    do_cleanup
    exit 1
fi
./examples/client/client -A $client_ca -c $client_ca -k $ca_key  -p $port
RESULT=$?
if [ $RESULT -ne 0 ]; then
    echo -e "\nServer load multiple trusted peer certs failed!"
    do_cleanup
    exit 1
fi
./examples/client/client -A $client_ca -c $wrong_cert -k $client_key -p $port
RESULT=$?
if [ $RESULT -eq 0 ]; then
    echo -e "\nServer load multiple trusted peer certs failed!"
    do_cleanup
    exit 1
fi

do_cleanup # kill PID of server running in infinit loop
rm $combined_cert
remove_ready_file
echo ""

echo "-----------------------------------------------------"
echo "ALL TESTS PASSED"
echo "-----------------------------------------------------"

exit 0