1
0

hostapd-full.config 4.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172
  1. # Example hostapd build time configuration
  2. #
  3. # This file lists the configuration options that are used when building the
  4. # hostapd binary. All lines starting with # are ignored. Configuration option
  5. # lines must be commented out complete, if they are not to be included, i.e.,
  6. # just setting VARIABLE=n is not disabling that variable.
  7. #
  8. # This file is included in Makefile, so variables like CFLAGS and LIBS can also
  9. # be modified from here. In most cass, these lines should use += in order not
  10. # to override previous values of the variables.
  11. # Driver interface for Host AP driver
  12. #CONFIG_DRIVER_HOSTAP=y
  13. # Driver interface for wired authenticator
  14. CONFIG_DRIVER_WIRED=y
  15. # Driver interface for Prism54 driver
  16. #CONFIG_DRIVER_PRISM54=y
  17. # Driver interface for drivers using the nl80211 kernel interface
  18. CONFIG_DRIVER_NL80211=y
  19. # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
  20. # shipped with your distribution yet. If that is the case, you need to build
  21. # newer libnl version and point the hostapd build to use it.
  22. #LIBNL=/usr/src/libnl
  23. #CFLAGS += -I$(LIBNL)/include
  24. #LIBS += -L$(LIBNL)/lib
  25. # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
  26. #CONFIG_DRIVER_BSD=y
  27. #CFLAGS += -I/usr/local/include
  28. #LIBS += -L/usr/local/lib
  29. # Driver interface for no driver (e.g., RADIUS server only)
  30. #CONFIG_DRIVER_NONE=y
  31. # IEEE 802.11F/IAPP
  32. CONFIG_IAPP=y
  33. # WPA2/IEEE 802.11i RSN pre-authentication
  34. CONFIG_RSN_PREAUTH=y
  35. # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
  36. CONFIG_PEERKEY=y
  37. # IEEE 802.11w (management frame protection)
  38. # This version is an experimental implementation based on IEEE 802.11w/D1.0
  39. # draft and is subject to change since the standard has not yet been finalized.
  40. # Driver support is also needed for IEEE 802.11w.
  41. #CONFIG_IEEE80211W=y
  42. # Integrated EAP server
  43. CONFIG_EAP=y
  44. # EAP-FAST for the integrated EAP server
  45. CONFIG_EAP_FAST=y
  46. # EAP-MD5 for the integrated EAP server
  47. CONFIG_EAP_MD5=y
  48. # EAP-TLS for the integrated EAP server
  49. CONFIG_EAP_TLS=y
  50. # EAP-MSCHAPv2 for the integrated EAP server
  51. CONFIG_EAP_MSCHAPV2=y
  52. # EAP-PEAP for the integrated EAP server
  53. CONFIG_EAP_PEAP=y
  54. # EAP-GTC for the integrated EAP server
  55. CONFIG_EAP_GTC=y
  56. # EAP-TTLS for the integrated EAP server
  57. CONFIG_EAP_TTLS=y
  58. # EAP-SIM for the integrated EAP server
  59. #CONFIG_EAP_SIM=y
  60. # EAP-AKA for the integrated EAP server
  61. #CONFIG_EAP_AKA=y
  62. # EAP-AKA' for the integrated EAP server
  63. # This requires CONFIG_EAP_AKA to be enabled, too.
  64. #CONFIG_EAP_AKA_PRIME=y
  65. # EAP-PAX for the integrated EAP server
  66. #CONFIG_EAP_PAX=y
  67. # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
  68. #CONFIG_EAP_PSK=y
  69. # EAP-SAKE for the integrated EAP server
  70. #CONFIG_EAP_SAKE=y
  71. # EAP-GPSK for the integrated EAP server
  72. #CONFIG_EAP_GPSK=y
  73. # Include support for optional SHA256 cipher suite in EAP-GPSK
  74. #CONFIG_EAP_GPSK_SHA256=y
  75. # EAP-FAST for the integrated EAP server
  76. # Note: Default OpenSSL package does not include support for all the
  77. # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
  78. # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
  79. # to add the needed functions.
  80. #CONFIG_EAP_FAST=y
  81. # Wi-Fi Protected Setup (WPS)
  82. CONFIG_WPS=y
  83. CONFIG_WPS2=y
  84. # Enable UPnP support for external WPS Registrars
  85. #CONFIG_WPS_UPNP=y
  86. # EAP-IKEv2
  87. #CONFIG_EAP_IKEV2=y
  88. # Trusted Network Connect (EAP-TNC)
  89. #CONFIG_EAP_TNC=y
  90. # PKCS#12 (PFX) support (used to read private key and certificate file from
  91. # a file that usually has extension .p12 or .pfx)
  92. CONFIG_PKCS12=y
  93. # RADIUS authentication server. This provides access to the integrated EAP
  94. # server from external hosts using RADIUS.
  95. #CONFIG_RADIUS_SERVER=y
  96. # Build IPv6 support for RADIUS operations
  97. CONFIG_IPV6=y
  98. # IEEE Std 802.11r-2008 (Fast BSS Transition)
  99. CONFIG_IEEE80211R=y
  100. # Use the hostapd's IEEE 802.11 authentication (ACL), but without
  101. # the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
  102. #CONFIG_DRIVER_RADIUS_ACL=y
  103. # IEEE 802.11n (High Throughput) support
  104. CONFIG_IEEE80211N=y
  105. # IEEE 802.11ac (Very High Throughput) support
  106. CONFIG_IEEE80211AC=y
  107. # Remove debugging code that is printing out debug messages to stdout.
  108. # This can be used to reduce the size of the hostapd considerably if debugging
  109. # code is not needed.
  110. #CONFIG_NO_STDOUT_DEBUG=y
  111. # Send debug messages to syslog instead of stdout
  112. CONFIG_DEBUG_SYSLOG=y
  113. # Remove support for RADIUS accounting
  114. #CONFIG_NO_ACCOUNTING=y
  115. # Remove support for RADIUS
  116. #CONFIG_NO_RADIUS=y
  117. # Remove support for VLANs
  118. #CONFIG_NO_VLAN=y
  119. CONFIG_TLS=internal
  120. CONFIG_INTERNAL_LIBTOMMATH=y
  121. CONFIG_INTERNAL_AES=y
  122. NEED_AES_DEC=y
  123. CONFIG_NO_RANDOM_POOL=y
  124. CONFIG_NO_DUMP_STATE=y
  125. CONFIG_WPS=y
  126. CONFIG_FULL_DYNAMIC_VLAN=y
  127. CONFIG_UBUS=y