M2M.dts 1.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111
  1. /dts-v1/;
  2. #include "rt5350.dtsi"
  3. #include <dt-bindings/input/input.h>
  4. / {
  5. compatible = "M2M", "ralink,rt5350-soc";
  6. model = "Intenso Memory 2 Move";
  7. chosen {
  8. bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  9. };
  10. gpio-leds {
  11. compatible = "gpio-leds";
  12. wifi {
  13. label = "m2m:blue:wifi";
  14. gpios = <&gpio0 7 1>;
  15. };
  16. wan {
  17. label = "m2m:green:wan";
  18. gpios = <&gpio0 12 1>;
  19. };
  20. };
  21. gpio-keys-polled {
  22. compatible = "gpio-keys-polled";
  23. #address-cells = <1>;
  24. #size-cells = <0>;
  25. poll-interval = <20>;
  26. power {
  27. label = "power";
  28. gpios = <&gpio0 1 1>;
  29. linux,code = <KEY_POWER>;
  30. };
  31. reset {
  32. label = "reset";
  33. gpios = <&gpio0 10 1>;
  34. linux,code = <KEY_RESTART>;
  35. };
  36. };
  37. };
  38. &spi0 {
  39. status = "okay";
  40. m25p80@0 {
  41. #address-cells = <1>;
  42. #size-cells = <1>;
  43. compatible = "jedec,spi-nor";
  44. reg = <0>;
  45. spi-max-frequency = <10000000>;
  46. partition@0 {
  47. label = "Bootloader";
  48. reg = <0x0 0x30000>;
  49. read-only;
  50. };
  51. partition@30000 {
  52. label = "Config";
  53. reg = <0x30000 0x10000>;
  54. read-only;
  55. };
  56. factory: partition@40000 {
  57. label = "Factory";
  58. reg = <0x40000 0x10000>;
  59. read-only;
  60. };
  61. partition@50000 {
  62. label = "firmware";
  63. reg = <0x50000 0x7b0000>;
  64. };
  65. };
  66. };
  67. &pinctrl {
  68. state_default: pinctrl0 {
  69. gpio {
  70. ralink,group = "i2c", "uartf";
  71. ralink,function = "gpio";
  72. };
  73. };
  74. };
  75. &ethernet {
  76. mtd-mac-address = <&factory 0x28>;
  77. };
  78. &esw {
  79. mediatek,portmap = <0x2f>;
  80. };
  81. &ehci {
  82. status = "okay";
  83. };
  84. &ohci {
  85. status = "okay";
  86. };
  87. &wmac {
  88. ralink,mtd-eeprom = <&factory 0x0>;
  89. };