123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360 |
- This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
- Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
- --- a/drivers/watchdog/Kconfig
- +++ b/drivers/watchdog/Kconfig
- @@ -1139,6 +1139,15 @@ config WDT_MTX1
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
- +config GPIO_WDT
- + tristate "GPIO Hardware Watchdog"
- + help
- + Hardware driver for GPIO-controlled watchdogs. GPIO pin and
- + toggle interval settings are platform-specific. The driver
- + will stop toggling the GPIO (i.e. machine reboots) after a
- + 100 second timer expired and no process has written to
- + /dev/watchdog during that time.
- +
- config PNX833X_WDT
- tristate "PNX833x Hardware Watchdog"
- depends on SOC_PNX8335
- --- a/drivers/watchdog/Makefile
- +++ b/drivers/watchdog/Makefile
- @@ -134,6 +134,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- +obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- --- /dev/null
- +++ b/drivers/watchdog/old_gpio_wdt.c
- @@ -0,0 +1,301 @@
- +/*
- + * Driver for GPIO-controlled Hardware Watchdogs.
- + *
- + * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
- + *
- + * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
- + *
- + * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
- + * All Rights Reserved.
- + * http://www.4g-systems.biz
- + *
- + * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- + *
- + * This program is free software; you can redistribute it and/or
- + * modify it under the terms of the GNU General Public License
- + * as published by the Free Software Foundation; either version
- + * 2 of the License, or (at your option) any later version.
- + *
- + * Neither Michael Stickel nor 4G Systems admit liability nor provide
- + * warranty for any of this software. This material is provided
- + * "AS-IS" and at no charge.
- + *
- + * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
- + *
- + * Release 0.01.
- + * Author: Michael Stickel michael.stickel@4g-systems.biz
- + *
- + * Release 0.02.
- + * Author: Florian Fainelli florian@openwrt.org
- + * use the Linux watchdog/timer APIs
- + *
- + * Release 0.03.
- + * Author: Mathias Adam <m.adam--linux@adamis.de>
- + * make it a generic gpio watchdog driver
- + *
- + * The Watchdog is configured to reset the MTX-1
- + * if it is not triggered for 100 seconds.
- + * It should not be triggered more often than 1.6 seconds.
- + *
- + * A timer triggers the watchdog every 5 seconds, until
- + * it is opened for the first time. After the first open
- + * it MUST be triggered every 2..95 seconds.
- + */
- +
- +#include <linux/module.h>
- +#include <linux/moduleparam.h>
- +#include <linux/types.h>
- +#include <linux/errno.h>
- +#include <linux/miscdevice.h>
- +#include <linux/fs.h>
- +#include <linux/init.h>
- +#include <linux/ioport.h>
- +#include <linux/timer.h>
- +#include <linux/completion.h>
- +#include <linux/jiffies.h>
- +#include <linux/watchdog.h>
- +#include <linux/platform_device.h>
- +#include <linux/io.h>
- +#include <linux/uaccess.h>
- +#include <linux/gpio.h>
- +#include <linux/old_gpio_wdt.h>
- +
- +static int ticks = 100 * HZ;
- +
- +static struct {
- + struct completion stop;
- + spinlock_t lock;
- + int running;
- + struct timer_list timer;
- + int queue;
- + int default_ticks;
- + unsigned long inuse;
- + unsigned gpio;
- + unsigned int gstate;
- + int interval;
- + int first_interval;
- +} gpio_wdt_device;
- +
- +static void gpio_wdt_trigger(unsigned long unused)
- +{
- + spin_lock(&gpio_wdt_device.lock);
- + if (gpio_wdt_device.running && ticks > 0)
- + ticks -= gpio_wdt_device.interval;
- +
- + /* toggle wdt gpio */
- + gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
- + gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
- +
- + if (gpio_wdt_device.queue && ticks > 0)
- + mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
- + else
- + complete(&gpio_wdt_device.stop);
- + spin_unlock(&gpio_wdt_device.lock);
- +}
- +
- +static void gpio_wdt_reset(void)
- +{
- + ticks = gpio_wdt_device.default_ticks;
- +}
- +
- +
- +static void gpio_wdt_start(void)
- +{
- + unsigned long flags;
- +
- + spin_lock_irqsave(&gpio_wdt_device.lock, flags);
- + if (!gpio_wdt_device.queue) {
- + gpio_wdt_device.queue = 1;
- + gpio_wdt_device.gstate = 1;
- + gpio_set_value(gpio_wdt_device.gpio, 1);
- + mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
- + }
- + gpio_wdt_device.running++;
- + spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
- +}
- +
- +static int gpio_wdt_stop(void)
- +{
- + unsigned long flags;
- +
- + spin_lock_irqsave(&gpio_wdt_device.lock, flags);
- + if (gpio_wdt_device.queue) {
- + gpio_wdt_device.queue = 0;
- + gpio_wdt_device.gstate = 0;
- + gpio_set_value(gpio_wdt_device.gpio, 0);
- + }
- + ticks = gpio_wdt_device.default_ticks;
- + spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
- + return 0;
- +}
- +
- +/* Filesystem functions */
- +
- +static int gpio_wdt_open(struct inode *inode, struct file *file)
- +{
- + if (test_and_set_bit(0, &gpio_wdt_device.inuse))
- + return -EBUSY;
- + return nonseekable_open(inode, file);
- +}
- +
- +
- +static int gpio_wdt_release(struct inode *inode, struct file *file)
- +{
- + clear_bit(0, &gpio_wdt_device.inuse);
- + return 0;
- +}
- +
- +static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
- + unsigned long arg)
- +{
- + void __user *argp = (void __user *)arg;
- + int __user *p = (int __user *)argp;
- + unsigned int value;
- + static const struct watchdog_info ident = {
- + .options = WDIOF_CARDRESET,
- + .identity = "GPIO WDT",
- + };
- +
- + switch (cmd) {
- + case WDIOC_GETSUPPORT:
- + if (copy_to_user(argp, &ident, sizeof(ident)))
- + return -EFAULT;
- + break;
- + case WDIOC_GETSTATUS:
- + case WDIOC_GETBOOTSTATUS:
- + put_user(0, p);
- + break;
- + case WDIOC_SETOPTIONS:
- + if (get_user(value, p))
- + return -EFAULT;
- + if (value & WDIOS_ENABLECARD)
- + gpio_wdt_start();
- + else if (value & WDIOS_DISABLECARD)
- + gpio_wdt_stop();
- + else
- + return -EINVAL;
- + return 0;
- + case WDIOC_KEEPALIVE:
- + gpio_wdt_reset();
- + break;
- + default:
- + return -ENOTTY;
- + }
- + return 0;
- +}
- +
- +
- +static ssize_t gpio_wdt_write(struct file *file, const char *buf,
- + size_t count, loff_t *ppos)
- +{
- + if (!count)
- + return -EIO;
- + gpio_wdt_reset();
- + return count;
- +}
- +
- +static const struct file_operations gpio_wdt_fops = {
- + .owner = THIS_MODULE,
- + .llseek = no_llseek,
- + .unlocked_ioctl = gpio_wdt_ioctl,
- + .open = gpio_wdt_open,
- + .write = gpio_wdt_write,
- + .release = gpio_wdt_release,
- +};
- +
- +
- +static struct miscdevice gpio_wdt_misc = {
- + .minor = WATCHDOG_MINOR,
- + .name = "watchdog",
- + .fops = &gpio_wdt_fops,
- +};
- +
- +
- +static int gpio_wdt_probe(struct platform_device *pdev)
- +{
- + int ret;
- + struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
- +
- + gpio_wdt_device.gpio = gpio_wdt_data->gpio;
- + gpio_wdt_device.interval = gpio_wdt_data->interval;
- + gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
- + if (gpio_wdt_device.first_interval <= 0) {
- + gpio_wdt_device.first_interval = gpio_wdt_device.interval;
- + }
- +
- + ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
- + if (ret < 0) {
- + dev_err(&pdev->dev, "failed to request gpio");
- + return ret;
- + }
- +
- + spin_lock_init(&gpio_wdt_device.lock);
- + init_completion(&gpio_wdt_device.stop);
- + gpio_wdt_device.queue = 0;
- + clear_bit(0, &gpio_wdt_device.inuse);
- + setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
- + gpio_wdt_device.default_ticks = ticks;
- +
- + gpio_wdt_start();
- + dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
- + gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
- + return 0;
- +}
- +
- +static int gpio_wdt_remove(struct platform_device *pdev)
- +{
- + /* FIXME: do we need to lock this test ? */
- + if (gpio_wdt_device.queue) {
- + gpio_wdt_device.queue = 0;
- + wait_for_completion(&gpio_wdt_device.stop);
- + }
- +
- + gpio_free(gpio_wdt_device.gpio);
- + misc_deregister(&gpio_wdt_misc);
- + return 0;
- +}
- +
- +static struct platform_driver gpio_wdt_driver = {
- + .probe = gpio_wdt_probe,
- + .remove = gpio_wdt_remove,
- + .driver.name = "gpio-wdt",
- + .driver.owner = THIS_MODULE,
- +};
- +
- +static int __init gpio_wdt_init(void)
- +{
- + return platform_driver_register(&gpio_wdt_driver);
- +}
- +arch_initcall(gpio_wdt_init);
- +
- +/*
- + * We do wdt initialization in two steps: arch_initcall probes the wdt
- + * very early to start pinging the watchdog (misc devices are not yet
- + * available), and later module_init() just registers the misc device.
- + */
- +static int gpio_wdt_init_late(void)
- +{
- + int ret;
- +
- + ret = misc_register(&gpio_wdt_misc);
- + if (ret < 0) {
- + pr_err("GPIO_WDT: failed to register misc device\n");
- + return ret;
- + }
- + return 0;
- +}
- +#ifndef MODULE
- +module_init(gpio_wdt_init_late);
- +#endif
- +
- +static void __exit gpio_wdt_exit(void)
- +{
- + platform_driver_unregister(&gpio_wdt_driver);
- +}
- +module_exit(gpio_wdt_exit);
- +
- +MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
- +MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
- +MODULE_LICENSE("GPL");
- +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
- +MODULE_ALIAS("platform:gpio-wdt");
- --- /dev/null
- +++ b/include/linux/old_gpio_wdt.h
- @@ -0,0 +1,21 @@
- +/*
- + * Definitions for the GPIO watchdog driver
- + *
- + * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
- + *
- + * This program is free software; you can redistribute it and/or modify
- + * it under the terms of the GNU General Public License version 2 as
- + * published by the Free Software Foundation.
- + *
- + */
- +
- +#ifndef _GPIO_WDT_H_
- +#define _GPIO_WDT_H_
- +
- +struct gpio_wdt_platform_data {
- + int gpio; /* GPIO line number */
- + int interval; /* watchdog reset interval in system ticks */
- + int first_interval; /* first wd reset interval in system ticks */
- +};
- +
- +#endif /* _GPIO_WDT_H_ */
|