1
0

VR500.dts 1.2 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485
  1. /dts-v1/;
  2. #include "mt7621.dtsi"
  3. #include <dt-bindings/input/input.h>
  4. / {
  5. model = "Planex VR500";
  6. memory@0 {
  7. device_type = "memory";
  8. reg = <0x0 0x10000000>;
  9. };
  10. chosen {
  11. bootargs = "console=ttyS0,57600";
  12. };
  13. gpio-leds {
  14. compatible = "gpio-leds";
  15. power {
  16. label = "vr500:green:power";
  17. gpios = <&gpio1 13 1>;
  18. };
  19. };
  20. gpio-keys-polled {
  21. compatible = "gpio-keys-polled";
  22. #address-cells = <1>;
  23. #size-cells = <0>;
  24. poll-interval = <20>;
  25. reset {
  26. label = "reset";
  27. gpios = <&gpio1 15 1>;
  28. linux,code = <KEY_RESTART>;
  29. };
  30. };
  31. };
  32. &spi0 {
  33. status = "okay";
  34. m25p80@0 {
  35. #address-cells = <1>;
  36. #size-cells = <1>;
  37. compatible = "jedec,spi-nor";
  38. reg = <0>;
  39. spi-max-frequency = <10000000>;
  40. m25p,chunked-io = <32>;
  41. partition@0 {
  42. label = "u-boot";
  43. reg = <0x0 0x30000>;
  44. read-only;
  45. };
  46. partition@30000 {
  47. label = "u-boot-env";
  48. reg = <0x30000 0x10000>;
  49. read-only;
  50. };
  51. factory: partition@40000 {
  52. label = "factory";
  53. reg = <0x40000 0x10000>;
  54. read-only;
  55. };
  56. partition@50000 {
  57. label = "firmware";
  58. reg = <0x50000 0x3fb0000>;
  59. };
  60. };
  61. };
  62. &pinctrl {
  63. state_default: pinctrl0 {
  64. gpio {
  65. ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
  66. ralink,function = "gpio";
  67. };
  68. };
  69. };