123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226 |
- From 3cdd9f5c4953465abb87ec757159cc0576ae6b0a Mon Sep 17 00:00:00 2001
- From: Chen-Yu Tsai <wens@csie.org>
- Date: Sat, 5 Dec 2015 21:16:43 +0800
- Subject: [PATCH] clk: sunxi: Add VE (Video Engine) module clock driver for
- sun[457]i
- The video engine has its own special module clock, consisting of a clock
- gate, configurable dividers, and a reset control.
- On later (sun[68]i) families, the reset control is moved out of this
- piece of hardware and grouped with reset controls of other peripherals.
- Signed-off-by: Chen-Yu Tsai <wens@csie.org>
- Tested-by: Jens Kuske <jenskuske@gmail.com>
- Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
- ---
- Documentation/devicetree/bindings/clock/sunxi.txt | 4 +
- drivers/clk/sunxi/Makefile | 1 +
- drivers/clk/sunxi/clk-a10-ve.c | 171 ++++++++++++++++++++++
- 3 files changed, 176 insertions(+)
- create mode 100644 drivers/clk/sunxi/clk-a10-ve.c
- --- a/Documentation/devicetree/bindings/clock/sunxi.txt
- +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
- @@ -71,6 +71,7 @@ Required properties:
- "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
- "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
- "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
- + "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
-
- Required properties for all clocks:
- - reg : shall be the control register address for the clock.
- @@ -90,6 +91,9 @@ Required properties for all clocks:
- And "allwinner,*-usb-clk" clocks also require:
- - reset-cells : shall be set to 1
-
- +The "allwinner,sun4i-a10-ve-clk" clock also requires:
- +- reset-cells : shall be set to 0
- +
- The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- - #reset-cells : shall be set to 1
- - resets : shall be the reset control phandle for the mmc block.
- --- a/drivers/clk/sunxi/Makefile
- +++ b/drivers/clk/sunxi/Makefile
- @@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o
- obj-y += clk-a10-hosc.o
- obj-y += clk-a10-mod1.o
- obj-y += clk-a10-pll2.o
- +obj-y += clk-a10-ve.o
- obj-y += clk-a20-gmac.o
- obj-y += clk-mod0.o
- obj-y += clk-simple-gates.o
- --- /dev/null
- +++ b/drivers/clk/sunxi/clk-a10-ve.c
- @@ -0,0 +1,171 @@
- +/*
- + * Copyright 2015 Chen-Yu Tsai
- + *
- + * Chen-Yu Tsai <wens@csie.org>
- + *
- + * This program is free software; you can redistribute it and/or modify
- + * it under the terms of the GNU General Public License as published by
- + * the Free Software Foundation; either version 2 of the License, or
- + * (at your option) any later version.
- + *
- + * This program is distributed in the hope that it will be useful,
- + * but WITHOUT ANY WARRANTY; without even the implied warranty of
- + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- + * GNU General Public License for more details.
- + */
- +
- +#include <linux/clk-provider.h>
- +#include <linux/of.h>
- +#include <linux/of_address.h>
- +#include <linux/reset-controller.h>
- +#include <linux/slab.h>
- +#include <linux/spinlock.h>
- +
- +static DEFINE_SPINLOCK(ve_lock);
- +
- +#define SUN4I_VE_ENABLE 31
- +#define SUN4I_VE_DIVIDER_SHIFT 16
- +#define SUN4I_VE_DIVIDER_WIDTH 3
- +#define SUN4I_VE_RESET 0
- +
- +/**
- + * sunxi_ve_reset... - reset bit in ve clk registers handling
- + */
- +
- +struct ve_reset_data {
- + void __iomem *reg;
- + spinlock_t *lock;
- + struct reset_controller_dev rcdev;
- +};
- +
- +static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev,
- + unsigned long id)
- +{
- + struct ve_reset_data *data = container_of(rcdev,
- + struct ve_reset_data,
- + rcdev);
- + unsigned long flags;
- + u32 reg;
- +
- + spin_lock_irqsave(data->lock, flags);
- +
- + reg = readl(data->reg);
- + writel(reg & ~BIT(SUN4I_VE_RESET), data->reg);
- +
- + spin_unlock_irqrestore(data->lock, flags);
- +
- + return 0;
- +}
- +
- +static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev,
- + unsigned long id)
- +{
- + struct ve_reset_data *data = container_of(rcdev,
- + struct ve_reset_data,
- + rcdev);
- + unsigned long flags;
- + u32 reg;
- +
- + spin_lock_irqsave(data->lock, flags);
- +
- + reg = readl(data->reg);
- + writel(reg | BIT(SUN4I_VE_RESET), data->reg);
- +
- + spin_unlock_irqrestore(data->lock, flags);
- +
- + return 0;
- +}
- +
- +static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev,
- + const struct of_phandle_args *reset_spec)
- +{
- + if (WARN_ON(reset_spec->args_count != 0))
- + return -EINVAL;
- +
- + return 0;
- +}
- +
- +static struct reset_control_ops sunxi_ve_reset_ops = {
- + .assert = sunxi_ve_reset_assert,
- + .deassert = sunxi_ve_reset_deassert,
- +};
- +
- +static void __init sun4i_ve_clk_setup(struct device_node *node)
- +{
- + struct clk *clk;
- + struct clk_divider *div;
- + struct clk_gate *gate;
- + struct ve_reset_data *reset_data;
- + const char *parent;
- + const char *clk_name = node->name;
- + void __iomem *reg;
- + int err;
- +
- + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
- + if (IS_ERR(reg))
- + return;
- +
- + div = kzalloc(sizeof(*div), GFP_KERNEL);
- + if (!div)
- + goto err_unmap;
- +
- + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
- + if (!gate)
- + goto err_free_div;
- +
- + of_property_read_string(node, "clock-output-names", &clk_name);
- + parent = of_clk_get_parent_name(node, 0);
- +
- + gate->reg = reg;
- + gate->bit_idx = SUN4I_VE_ENABLE;
- + gate->lock = &ve_lock;
- +
- + div->reg = reg;
- + div->shift = SUN4I_VE_DIVIDER_SHIFT;
- + div->width = SUN4I_VE_DIVIDER_WIDTH;
- + div->lock = &ve_lock;
- +
- + clk = clk_register_composite(NULL, clk_name, &parent, 1,
- + NULL, NULL,
- + &div->hw, &clk_divider_ops,
- + &gate->hw, &clk_gate_ops,
- + CLK_SET_RATE_PARENT);
- + if (IS_ERR(clk))
- + goto err_free_gate;
- +
- + err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
- + if (err)
- + goto err_unregister_clk;
- +
- + reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
- + if (!reset_data)
- + goto err_del_provider;
- +
- + reset_data->reg = reg;
- + reset_data->lock = &ve_lock;
- + reset_data->rcdev.nr_resets = 1;
- + reset_data->rcdev.ops = &sunxi_ve_reset_ops;
- + reset_data->rcdev.of_node = node;
- + reset_data->rcdev.of_xlate = sunxi_ve_of_xlate;
- + reset_data->rcdev.of_reset_n_cells = 0;
- + err = reset_controller_register(&reset_data->rcdev);
- + if (err)
- + goto err_free_reset;
- +
- + return;
- +
- +err_free_reset:
- + kfree(reset_data);
- +err_del_provider:
- + of_clk_del_provider(node);
- +err_unregister_clk:
- + clk_unregister(clk);
- +err_free_gate:
- + kfree(gate);
- +err_free_div:
- + kfree(div);
- +err_unmap:
- + iounmap(reg);
- +}
- +CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk",
- + sun4i_ve_clk_setup);
|