MPRA2.dts 1.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119
  1. /dts-v1/;
  2. #include "rt5350.dtsi"
  3. #include <dt-bindings/input/input.h>
  4. / {
  5. compatible = "MPRA2", "ralink,rt5350-soc";
  6. model = "HAME MPR-A2";
  7. gpio-leds {
  8. compatible = "gpio-leds";
  9. system {
  10. label = "mpr-a2:blue:system";
  11. gpios = <&gpio0 20 1>;
  12. };
  13. power {
  14. label = "mpr-a2:red:power";
  15. gpios = <&gpio0 17 1>;
  16. };
  17. };
  18. gpio-keys-polled {
  19. compatible = "gpio-keys-polled";
  20. #address-cells = <1>;
  21. #size-cells = <0>;
  22. poll-interval = <20>;
  23. wps {
  24. label = "reset";
  25. gpios = <&gpio0 0 1>;
  26. linux,code = <KEY_RESTART>;
  27. };
  28. };
  29. gpio_export {
  30. compatible = "gpio-export";
  31. #size-cells = <0>;
  32. usb {
  33. gpio-export,name = "usb";
  34. gpio-export,output = <1>;
  35. gpios = <&gpio0 7 0>;
  36. };
  37. root_hub {
  38. gpio-export,name = "root_hub";
  39. gpio-export,output = <1>;
  40. gpios = <&gpio0 12 0>;
  41. };
  42. };
  43. };
  44. &spi0 {
  45. status = "okay";
  46. m25p80@0 {
  47. #address-cells = <1>;
  48. #size-cells = <1>;
  49. compatible = "jedec,spi-nor";
  50. reg = <0>;
  51. spi-max-frequency = <10000000>;
  52. partition@0 {
  53. label = "u-boot";
  54. reg = <0x0 0x30000>;
  55. read-only;
  56. };
  57. partition@30000 {
  58. label = "u-boot-env";
  59. reg = <0x30000 0x10000>;
  60. read-only;
  61. };
  62. factory: partition@40000 {
  63. label = "factory";
  64. reg = <0x40000 0x10000>;
  65. read-only;
  66. };
  67. partition@50000 {
  68. label = "firmware";
  69. reg = <0x50000 0x7b0000>;
  70. };
  71. };
  72. };
  73. &pinctrl {
  74. state_default: pinctrl0 {
  75. gpio {
  76. ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  77. ralink,function = "gpio";
  78. };
  79. };
  80. };
  81. &ethernet {
  82. mtd-mac-address = <&factory 0x4>;
  83. };
  84. &esw {
  85. mediatek,portmap = <0x1>;
  86. mediatek,portdisable = <0x3e>;
  87. };
  88. &wmac {
  89. ralink,mtd-eeprom = <&factory 0>;
  90. };
  91. &ehci {
  92. status = "okay";
  93. };
  94. &ohci {
  95. status = "okay";
  96. };