123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178 |
- /*
- * D-Link DIR-869 A1 support
- *
- * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
- * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
- *
- * Derived from: mach-ubnt-unifiac.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
- #include <linux/gpio.h>
- #include <linux/init.h>
- #include <linux/pci.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <linux/platform_data/phy-at803x.h>
- #include <linux/ar8216_platform.h>
- #include "common.h"
- #include "dev-ap9x-pci.h"
- #include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-m25p80.h"
- #include "dev-wmac.h"
- #include "machtypes.h"
- #include "nvram.h"
- #define DIR869A1_GPIO_BTN_RESET 1
- #define DIR869A1_GPIO_BTN_WPS 2
- #define DIR869A1_GPIO_SWITCH_MODE 8
- #define DIR869A1_GPIO_ENABLE_SWITCH 11
- #define DIR869A1_GPIO_LED_POWER 15
- #define DIR869A1_GPIO_LED_ORANGE 16
- #define DIR869A1_KEYS_POLL_INTERVAL 20 /* msecs */
- #define DIR869A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR869A1_KEYS_POLL_INTERVAL)
- #define DIR869A1_DEVDATA_ADDR 0x1f050000
- #define DIR869A1_DEVDATA_SIZE 0x10000
- #define DIR869A1_EEPROM_ADDR 0x1fff0000
- #define DIR869A1_WMAC_CALDATA_OFFSET 0x1000
- #define DIR869A1_PCI_CALDATA_OFFSET 0x5000
- static struct gpio_led dir869a1_leds_gpio[] __initdata = {
- {
- /* Actually, this GPIO controls the LED power,
- * while d-link:orange:status switches it between
- * orange and white */
- .name = "d-link:white:status",
- .gpio = DIR869A1_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:orange:status",
- .gpio = DIR869A1_GPIO_LED_ORANGE,
- .active_low = 0,
- },
- };
- static struct gpio_keys_button dir869a1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "mode",
- .type = EV_SW,
- .code = BTN_0,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_SWITCH_MODE,
- .active_low = 0,
- },
- };
- static struct ar8327_pad_cfg dir869a1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
- };
- static struct ar8327_platform_data dir869a1_ar8327_data = {
- .pad0_cfg = &dir869a1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- };
- static struct mdio_board_info dir869a1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .phy_addr = 0,
- .platform_data = &dir869a1_ar8327_data,
- },
- };
- static void dir869a1_get_mac(const char *name, char *mac)
- {
- u8 *nvram = (u8 *) KSEG1ADDR(DIR869A1_DEVDATA_ADDR);
- int err;
- err = ath79_nvram_parse_mac_addr(nvram, DIR869A1_DEVDATA_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
- }
- static void __init dir869a1_setup(void)
- {
- u8 *eeprom = (u8 *) KSEG1ADDR(DIR869A1_EEPROM_ADDR);
- u8 wlan24mac[ETH_ALEN] = {}, wlan5mac[ETH_ALEN] = {};
- ath79_register_m25p80(NULL);
- gpio_request_one(DIR869A1_GPIO_ENABLE_SWITCH,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "Switch power");
- dir869a1_get_mac("lanmac=", ath79_eth0_data.mac_addr);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(0);
- mdiobus_register_board_info(dir869a1_mdio0_info,
- ARRAY_SIZE(dir869a1_mdio0_info));
- ath79_register_mdio(0, 0);
- ath79_register_eth(0);
- dir869a1_get_mac("wlan24mac=", wlan24mac);
- ath79_register_wmac(eeprom + DIR869A1_WMAC_CALDATA_OFFSET, wlan24mac);
- dir869a1_get_mac("wlan5mac=", wlan5mac);
- ap91_pci_init(eeprom + DIR869A1_PCI_CALDATA_OFFSET, wlan5mac);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir869a1_leds_gpio),
- dir869a1_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DIR869A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir869a1_gpio_keys),
- dir869a1_gpio_keys);
- }
- MIPS_MACHINE(ATH79_MACH_DIR_869_A1, "DIR-869-A1", "D-Link DIR-869 rev. A1",
- dir869a1_setup);
|