|
@@ -0,0 +1,530 @@
|
|
|
|
+From 67f4c228c2bf515386cd54073104dc2e6eae85ea Mon Sep 17 00:00:00 2001
|
|
|
|
+From: David Bauer <mail@david-bauer.net>
|
|
|
|
+Date: Fri, 10 Jul 2020 14:58:30 +0200
|
|
|
|
+Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
|
|
|
|
+
|
|
|
|
+This adds support for the NanoPi R2S from FriendlyArm.
|
|
|
|
+
|
|
|
|
+Rockchip RK3328 SoC
|
|
|
|
+1GB DDR4 RAM
|
|
|
|
+Gigabit Ethernet (WAN)
|
|
|
|
+Gigabit Ethernet (USB3) (LAN)
|
|
|
|
+USB 2.0 Host Port
|
|
|
|
+MicroSD slot
|
|
|
|
+Reset button
|
|
|
|
+WAN - LAN - SYS LED
|
|
|
|
+
|
|
|
|
+Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
+---
|
|
|
|
+ arch/arm/dts/Makefile | 1 +
|
|
|
|
+ arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 34 +++
|
|
|
|
+ arch/arm/dts/rk3328-nanopi-r2s.dts | 334 +++++++++++++++++++++
|
|
|
|
+ board/rockchip/evb_rk3328/MAINTAINERS | 7 +
|
|
|
|
+ configs/nanopi-r2s-rk3328_defconfig | 99 ++++++
|
|
|
|
+ 5 files changed, 475 insertions(+)
|
|
|
|
+ create mode 100644 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
|
|
|
|
+ create mode 100644 arch/arm/dts/rk3328-nanopi-r2s.dts
|
|
|
|
+ create mode 100644 configs/nanopi-r2s-rk3328_defconfig
|
|
|
|
+
|
|
|
|
+--- a/arch/arm/dts/Makefile
|
|
|
|
++++ b/arch/arm/dts/Makefile
|
|
|
|
+@@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
|
|
|
|
+
|
|
|
|
+ dtb-$(CONFIG_ROCKCHIP_RK3328) += \
|
|
|
|
+ rk3328-evb.dtb \
|
|
|
|
++ rk3328-nanopi-r2s.dtb \
|
|
|
|
+ rk3328-roc-cc.dtb \
|
|
|
|
+ rk3328-rock64.dtb \
|
|
|
|
+ rk3328-rock-pi-e.dtb
|
|
|
|
+--- /dev/null
|
|
|
|
++++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
|
|
|
|
+@@ -0,0 +1,34 @@
|
|
|
|
++// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
++/*
|
|
|
|
++ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
|
|
|
|
++ * (C) Copyright 2020 David Bauer
|
|
|
|
++ */
|
|
|
|
++
|
|
|
|
++#include "rk3328-u-boot.dtsi"
|
|
|
|
++#include "rk3328-sdram-ddr4-666.dtsi"
|
|
|
|
++/ {
|
|
|
|
++ chosen {
|
|
|
|
++ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&gpio0 {
|
|
|
|
++ u-boot,dm-spl;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&pinctrl {
|
|
|
|
++ u-boot,dm-spl;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&sdmmc0m1_gpio {
|
|
|
|
++ u-boot,dm-spl;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&pcfg_pull_up_4ma {
|
|
|
|
++ u-boot,dm-spl;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++/* Need this and all the pinctrl/gpio stuff above to set pinmux */
|
|
|
|
++&vcc_sd {
|
|
|
|
++ u-boot,dm-spl;
|
|
|
|
++};
|
|
|
|
+--- /dev/null
|
|
|
|
++++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
|
|
|
|
+@@ -0,0 +1,334 @@
|
|
|
|
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
++/*
|
|
|
|
++ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
|
|
|
|
++ */
|
|
|
|
++
|
|
|
|
++/dts-v1/;
|
|
|
|
++
|
|
|
|
++#include <dt-bindings/input/input.h>
|
|
|
|
++#include <dt-bindings/gpio/gpio.h>
|
|
|
|
++#include "rk3328.dtsi"
|
|
|
|
++
|
|
|
|
++/ {
|
|
|
|
++ model = "FriendlyARM NanoPi R2S";
|
|
|
|
++ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
|
|
|
|
++
|
|
|
|
++ chosen {
|
|
|
|
++ stdout-path = "serial2:1500000n8";
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ gmac_clkin: external-gmac-clock {
|
|
|
|
++ compatible = "fixed-clock";
|
|
|
|
++ clock-frequency = <125000000>;
|
|
|
|
++ clock-output-names = "gmac_clkin";
|
|
|
|
++ #clock-cells = <0>;
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_sd: sdmmc-regulator {
|
|
|
|
++ compatible = "regulator-fixed";
|
|
|
|
++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&sdmmc0m1_gpio>;
|
|
|
|
++ regulator-name = "vcc_sd";
|
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
|
++ vin-supply = <&vcc_io>;
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_sdio: sdmmcio-regulator {
|
|
|
|
++ compatible = "regulator-gpio";
|
|
|
|
++ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
|
|
++ enable-active-high;
|
|
|
|
++ states = <1800000 0x1
|
|
|
|
++ 3300000 0x0>;
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&sdio_vcc_pin>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
|
++ regulator-name = "vcc_sdio";
|
|
|
|
++ regulator-settling-time-us = <5000>;
|
|
|
|
++ regulator-type = "voltage";
|
|
|
|
++ vin-supply = <&vcc_io>;
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_sys: vcc-sys {
|
|
|
|
++ compatible = "regulator-fixed";
|
|
|
|
++ regulator-name = "vcc_sys";
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ leds {
|
|
|
|
++ compatible = "gpio-leds";
|
|
|
|
++
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&led_pins>;
|
|
|
|
++
|
|
|
|
++ sys {
|
|
|
|
++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
|
|
++ label = "nanopi-r2s:red:sys";
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ lan {
|
|
|
|
++ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
|
++ label = "nanopi-r2s:green:lan";
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ wan {
|
|
|
|
++ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
|
|
++ label = "nanopi-r2s:green:wan";
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ gpio_keys {
|
|
|
|
++ compatible = "gpio-keys-polled";
|
|
|
|
++ poll-interval = <100>;
|
|
|
|
++
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&button_pins>;
|
|
|
|
++
|
|
|
|
++ reset {
|
|
|
|
++ label = "Reset Button";
|
|
|
|
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
|
|
|
++ linux,code = <KEY_RESTART>;
|
|
|
|
++ debounce-interval = <50>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&cpu0 {
|
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&cpu1 {
|
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&cpu2 {
|
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&cpu3 {
|
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&gmac2io {
|
|
|
|
++ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
|
|
++ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
|
|
|
++ clock_in_out = "input";
|
|
|
|
++ phy-supply = <&vcc_io>;
|
|
|
|
++ phy-handle = <&rtl8211e>;
|
|
|
|
++ phy-mode = "rgmii";
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&rgmiim1_pins>;
|
|
|
|
++ snps,aal;
|
|
|
|
++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
|
|
++ snps,reset-active-low;
|
|
|
|
++ snps,reset-delays-us = <0 10000 50000>;
|
|
|
|
++ tx_delay = <0x24>;
|
|
|
|
++ rx_delay = <0x18>;
|
|
|
|
++ status = "okay";
|
|
|
|
++
|
|
|
|
++ mdio {
|
|
|
|
++ compatible = "snps,dwmac-mdio";
|
|
|
|
++ #address-cells = <1>;
|
|
|
|
++ #size-cells = <0>;
|
|
|
|
++
|
|
|
|
++ rtl8211e: ethernet-phy@0 {
|
|
|
|
++ reg = <0>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&i2c1 {
|
|
|
|
++ status = "okay";
|
|
|
|
++
|
|
|
|
++ rk805: rk805@18 {
|
|
|
|
++ compatible = "rockchip,rk805";
|
|
|
|
++ reg = <0x18>;
|
|
|
|
++ interrupt-parent = <&gpio2>;
|
|
|
|
++ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
++ #clock-cells = <1>;
|
|
|
|
++ clock-output-names = "xin32k", "rk805-clkout2";
|
|
|
|
++ gpio-controller;
|
|
|
|
++ #gpio-cells = <2>;
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&pmic_int_l>;
|
|
|
|
++ rockchip,system-power-controller;
|
|
|
|
++ wakeup-source;
|
|
|
|
++
|
|
|
|
++ vcc1-supply = <&vcc_sys>;
|
|
|
|
++ vcc2-supply = <&vcc_sys>;
|
|
|
|
++ vcc3-supply = <&vcc_sys>;
|
|
|
|
++ vcc4-supply = <&vcc_sys>;
|
|
|
|
++ vcc5-supply = <&vcc_io>;
|
|
|
|
++ vcc6-supply = <&vcc_sys>;
|
|
|
|
++
|
|
|
|
++ regulators {
|
|
|
|
++ vdd_logic: DCDC_REG1 {
|
|
|
|
++ regulator-name = "vdd_logic";
|
|
|
|
++ regulator-min-microvolt = <712500>;
|
|
|
|
++ regulator-max-microvolt = <1450000>;
|
|
|
|
++ regulator-ramp-delay = <12500>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <1000000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vdd_arm: DCDC_REG2 {
|
|
|
|
++ regulator-name = "vdd_arm";
|
|
|
|
++ regulator-min-microvolt = <712500>;
|
|
|
|
++ regulator-max-microvolt = <1450000>;
|
|
|
|
++ regulator-ramp-delay = <12500>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <950000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_ddr: DCDC_REG3 {
|
|
|
|
++ regulator-name = "vcc_ddr";
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_io: DCDC_REG4 {
|
|
|
|
++ regulator-name = "vcc_io";
|
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <3300000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc_18: LDO_REG1 {
|
|
|
|
++ regulator-name = "vcc_18";
|
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <1800000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vcc18_emmc: LDO_REG2 {
|
|
|
|
++ regulator-name = "vcc18_emmc";
|
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <1800000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ vdd_10: LDO_REG3 {
|
|
|
|
++ regulator-name = "vdd_10";
|
|
|
|
++ regulator-min-microvolt = <1000000>;
|
|
|
|
++ regulator-max-microvolt = <1000000>;
|
|
|
|
++ regulator-always-on;
|
|
|
|
++ regulator-boot-on;
|
|
|
|
++ regulator-state-mem {
|
|
|
|
++ regulator-on-in-suspend;
|
|
|
|
++ regulator-suspend-microvolt = <1000000>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&io_domains {
|
|
|
|
++ status = "okay";
|
|
|
|
++
|
|
|
|
++ vccio1-supply = <&vcc_io>;
|
|
|
|
++ vccio2-supply = <&vcc18_emmc>;
|
|
|
|
++ vccio3-supply = <&vcc_sdio>;
|
|
|
|
++ vccio4-supply = <&vcc_18>;
|
|
|
|
++ vccio5-supply = <&vcc_io>;
|
|
|
|
++ vccio6-supply = <&vcc_io>;
|
|
|
|
++ pmuio-supply = <&vcc_io>;
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&pinctrl {
|
|
|
|
++ leds {
|
|
|
|
++ led_pins: led-pins {
|
|
|
|
++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
|
|
++ <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
|
|
++ <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ button {
|
|
|
|
++ button_pins: button-pins {
|
|
|
|
++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ pmic {
|
|
|
|
++ pmic_int_l: pmic-int-l {
|
|
|
|
++ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++
|
|
|
|
++ sd {
|
|
|
|
++ sdio_vcc_pin: sdio-vcc-pin {
|
|
|
|
++ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
++ };
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&sdmmc {
|
|
|
|
++ bus-width = <4>;
|
|
|
|
++ cap-mmc-highspeed;
|
|
|
|
++ cap-sd-highspeed;
|
|
|
|
++ disable-wp;
|
|
|
|
++ max-frequency = <150000000>;
|
|
|
|
++ pinctrl-names = "default";
|
|
|
|
++ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
|
|
|
++ vmmc-supply = <&vcc_sd>;
|
|
|
|
++ vqmmc-supply = <&vcc_sdio>;
|
|
|
|
++ status = "okay";
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&tsadc {
|
|
|
|
++ rockchip,hw-tshut-mode = <0>;
|
|
|
|
++ rockchip,hw-tshut-polarity = <0>;
|
|
|
|
++ status = "okay";
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&uart2 {
|
|
|
|
++ status = "okay";
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&u2phy {
|
|
|
|
++ status = "okay";
|
|
|
|
++
|
|
|
|
++ u2phy_host: host-port {
|
|
|
|
++ status = "okay";
|
|
|
|
++ };
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&usb_host0_ehci {
|
|
|
|
++ status = "okay";
|
|
|
|
++};
|
|
|
|
++
|
|
|
|
++&usb_host0_ohci {
|
|
|
|
++ status = "okay";
|
|
|
|
++};
|
|
|
|
+--- a/board/rockchip/evb_rk3328/MAINTAINERS
|
|
|
|
++++ b/board/rockchip/evb_rk3328/MAINTAINERS
|
|
|
|
+@@ -5,6 +5,13 @@ F: board/rockchip/evb_rk3328
|
|
|
|
+ F: include/configs/evb_rk3328.h
|
|
|
|
+ F: configs/evb-rk3328_defconfig
|
|
|
|
+
|
|
|
|
++NANOPI-R2S-RK3328
|
|
|
|
++M: David Bauer <mail@david-bauer.net>
|
|
|
|
++S: Maintained
|
|
|
|
++F: configs/nanopi-r2s-rk3328_defconfig
|
|
|
|
++F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
|
|
|
|
++F: arch/arm/dts/rk3328-nanopi-r2s.dts
|
|
|
|
++
|
|
|
|
+ ROC-RK3328-CC
|
|
|
|
+ M: Loic Devulder <ldevulder@suse.com>
|
|
|
|
+ M: Chen-Yu Tsai <wens@csie.org>
|
|
|
|
+--- /dev/null
|
|
|
|
++++ b/configs/nanopi-r2s-rk3328_defconfig
|
|
|
|
+@@ -0,0 +1,99 @@
|
|
|
|
++CONFIG_ARM=y
|
|
|
|
++CONFIG_ARCH_ROCKCHIP=y
|
|
|
|
++CONFIG_SYS_TEXT_BASE=0x00200000
|
|
|
|
++CONFIG_SPL_GPIO_SUPPORT=y
|
|
|
|
++CONFIG_ENV_OFFSET=0x3F8000
|
|
|
|
++CONFIG_ROCKCHIP_RK3328=y
|
|
|
|
++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
|
|
|
|
++CONFIG_TPL_LIBCOMMON_SUPPORT=y
|
|
|
|
++CONFIG_TPL_LIBGENERIC_SUPPORT=y
|
|
|
|
++CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
|
|
|
|
++CONFIG_SPL_STACK_R_ADDR=0x600000
|
|
|
|
++CONFIG_NR_DRAM_BANKS=1
|
|
|
|
++CONFIG_DEBUG_UART_BASE=0xFF130000
|
|
|
|
++CONFIG_DEBUG_UART_CLOCK=24000000
|
|
|
|
++CONFIG_SMBIOS_PRODUCT_NAME="nanopi_r2s_rk3328"
|
|
|
|
++CONFIG_DEBUG_UART=y
|
|
|
|
++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
|
|
|
|
++# CONFIG_ANDROID_BOOT_IMAGE is not set
|
|
|
|
++CONFIG_FIT=y
|
|
|
|
++CONFIG_FIT_VERBOSE=y
|
|
|
|
++CONFIG_SPL_LOAD_FIT=y
|
|
|
|
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
|
|
|
|
++CONFIG_MISC_INIT_R=y
|
|
|
|
++# CONFIG_DISPLAY_CPUINFO is not set
|
|
|
|
++CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
|
|
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
|
|
++CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
|
|
|
++CONFIG_SPL_STACK_R=y
|
|
|
|
++CONFIG_SPL_I2C_SUPPORT=y
|
|
|
|
++CONFIG_SPL_POWER_SUPPORT=y
|
|
|
|
++CONFIG_SPL_ATF=y
|
|
|
|
++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
|
|
|
|
++CONFIG_CMD_BOOTZ=y
|
|
|
|
++CONFIG_CMD_GPT=y
|
|
|
|
++CONFIG_CMD_MMC=y
|
|
|
|
++CONFIG_CMD_USB=y
|
|
|
|
++# CONFIG_CMD_SETEXPR is not set
|
|
|
|
++CONFIG_CMD_TIME=y
|
|
|
|
++CONFIG_SPL_OF_CONTROL=y
|
|
|
|
++CONFIG_TPL_OF_CONTROL=y
|
|
|
|
++CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
|
|
|
|
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
|
|
++CONFIG_TPL_OF_PLATDATA=y
|
|
|
|
++CONFIG_ENV_IS_IN_MMC=y
|
|
|
|
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
|
|
++CONFIG_NET_RANDOM_ETHADDR=y
|
|
|
|
++CONFIG_TPL_DM=y
|
|
|
|
++CONFIG_REGMAP=y
|
|
|
|
++CONFIG_SPL_REGMAP=y
|
|
|
|
++CONFIG_TPL_REGMAP=y
|
|
|
|
++CONFIG_SYSCON=y
|
|
|
|
++CONFIG_SPL_SYSCON=y
|
|
|
|
++CONFIG_TPL_SYSCON=y
|
|
|
|
++CONFIG_CLK=y
|
|
|
|
++CONFIG_SPL_CLK=y
|
|
|
|
++CONFIG_FASTBOOT_BUF_ADDR=0x800800
|
|
|
|
++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
|
|
|
++CONFIG_ROCKCHIP_GPIO=y
|
|
|
|
++CONFIG_SYS_I2C_ROCKCHIP=y
|
|
|
|
++CONFIG_MMC_DW=y
|
|
|
|
++CONFIG_MMC_DW_ROCKCHIP=y
|
|
|
|
++CONFIG_SF_DEFAULT_SPEED=20000000
|
|
|
|
++CONFIG_DM_ETH=y
|
|
|
|
++CONFIG_ETH_DESIGNWARE=y
|
|
|
|
++CONFIG_GMAC_ROCKCHIP=y
|
|
|
|
++CONFIG_PINCTRL=y
|
|
|
|
++CONFIG_SPL_PINCTRL=y
|
|
|
|
++CONFIG_DM_PMIC=y
|
|
|
|
++CONFIG_PMIC_RK8XX=y
|
|
|
|
++CONFIG_SPL_DM_REGULATOR=y
|
|
|
|
++CONFIG_REGULATOR_PWM=y
|
|
|
|
++CONFIG_DM_REGULATOR_FIXED=y
|
|
|
|
++CONFIG_SPL_DM_REGULATOR_FIXED=y
|
|
|
|
++CONFIG_REGULATOR_RK8XX=y
|
|
|
|
++CONFIG_PWM_ROCKCHIP=y
|
|
|
|
++CONFIG_RAM=y
|
|
|
|
++CONFIG_SPL_RAM=y
|
|
|
|
++CONFIG_TPL_RAM=y
|
|
|
|
++CONFIG_DM_RESET=y
|
|
|
|
++CONFIG_BAUDRATE=1500000
|
|
|
|
++CONFIG_DEBUG_UART_SHIFT=2
|
|
|
|
++CONFIG_SYSRESET=y
|
|
|
|
++# CONFIG_TPL_SYSRESET is not set
|
|
|
|
++CONFIG_USB=y
|
|
|
|
++CONFIG_USB_XHCI_HCD=y
|
|
|
|
++CONFIG_USB_XHCI_DWC3=y
|
|
|
|
++CONFIG_USB_EHCI_HCD=y
|
|
|
|
++CONFIG_USB_EHCI_GENERIC=y
|
|
|
|
++CONFIG_USB_OHCI_HCD=y
|
|
|
|
++CONFIG_USB_OHCI_GENERIC=y
|
|
|
|
++CONFIG_USB_DWC2=y
|
|
|
|
++CONFIG_USB_DWC3=y
|
|
|
|
++# CONFIG_USB_DWC3_GADGET is not set
|
|
|
|
++CONFIG_USB_GADGET=y
|
|
|
|
++CONFIG_USB_GADGET_DWC2_OTG=y
|
|
|
|
++CONFIG_SPL_TINY_MEMSET=y
|
|
|
|
++CONFIG_TPL_TINY_MEMSET=y
|
|
|
|
++CONFIG_ERRNO_STR=y
|
|
|
|
++CONFIG_SMBIOS_MANUFACTURER="pine64"
|