123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241 |
- #!/bin/sh
- [ -z "$2" ] && echo "Error: should be run by odhcpc6c" && exit 1
- . /lib/functions.sh
- . /lib/netifd/netifd-proto.sh
- setup_interface () {
- local device="$1"
- local prefsig=""
- local addrsig=""
- # Apply IPv6 / ND configuration
- HOPLIMIT=$(cat /proc/sys/net/ipv6/conf/$device/hop_limit)
- [ -n "$RA_HOPLIMIT" -a -n "$HOPLIMIT" ] && [ "$RA_HOPLIMIT" -gt "$HOPLIMIT" ] && echo "$RA_HOPLIMIT" > /proc/sys/net/ipv6/conf/$device/hop_limit
- [ -n "$RA_MTU" ] && [ "$RA_MTU" -ge 1280 ] && echo "$RA_MTU" > /proc/sys/net/ipv6/conf/$device/mtu 2>/dev/null
- [ -n "$RA_REACHABLE" ] && [ "$RA_REACHABLE" -gt 0 ] && echo "$RA_REACHABLE" > /proc/sys/net/ipv6/neigh/$device/base_reachable_time_ms
- [ -n "$RA_RETRANSMIT" ] && [ "$RA_RETRANSMIT" -gt 0 ] && echo "$RA_RETRANSMIT" > /proc/sys/net/ipv6/neigh/$device/retrans_time_ms
- proto_init_update "*" 1
- # Merge RA-DNS
- for radns in $RA_DNS; do
- local duplicate=0
- for dns in $RDNSS; do
- [ "$radns" = "$dns" ] && duplicate=1
- done
- [ "$duplicate" = 0 ] && RDNSS="$RDNSS $radns"
- done
- for dns in $RDNSS; do
- proto_add_dns_server "$dns"
- done
- for radomain in $RA_DOMAINS; do
- local duplicate=0
- for domain in $DOMAINS; do
- [ "$radomain" = "$domain" ] && duplicate=1
- done
- [ "$duplicate" = 0 ] && DOMAINS="$DOMAINS $radomain"
- done
- for domain in $DOMAINS; do
- proto_add_dns_search "$domain"
- done
- for prefix in $PREFIXES; do
- proto_add_ipv6_prefix "$prefix"
- prefsig="$prefsig ${prefix%%,*}"
- local entry="${prefix#*/}"
- entry="${entry#*,}"
- entry="${entry#*,}"
- local valid="${entry%%,*}"
- if [ -z "$RA_ADDRESSES" -a -z "$RA_ROUTES" -a \
- -z "$RA_DNS" -a "$FAKE_ROUTES" = 1 ]; then
- RA_ROUTES="::/0,$SERVER,$valid,4096"
- fi
- done
- for prefix in $USERPREFIX; do
- proto_add_ipv6_prefix "$prefix"
- done
- # Merge addresses
- for entry in $RA_ADDRESSES; do
- local duplicate=0
- local addr="${entry%%/*}"
- for dentry in $ADDRESSES; do
- local daddr="${dentry%%/*}"
- [ "$addr" = "$daddr" ] && duplicate=1
- done
- [ "$duplicate" = "0" ] && ADDRESSES="$ADDRESSES $entry"
- done
- for entry in $ADDRESSES; do
- local addr="${entry%%/*}"
- entry="${entry#*/}"
- local mask="${entry%%,*}"
- entry="${entry#*,}"
- local preferred="${entry%%,*}"
- entry="${entry#*,}"
- local valid="${entry%%,*}"
- proto_add_ipv6_address "$addr" "$mask" "$preferred" "$valid" 1
- addrsig="$addrsig $addr/$mask"
- if [ -z "$RA_ADDRESSES" -a -z "$RA_ROUTES" -a \
- -z "$RA_DNS" -a "$FAKE_ROUTES" = 1 ]; then
- RA_ROUTES="::/0,$SERVER,$valid,4096"
- fi
- # RFC 7278
- if [ "$mask" -eq 64 -a -z "$PREFIXES" -a -n "$EXTENDPREFIX" ]; then
- proto_add_ipv6_prefix "$addr/$mask,$preferred,$valid"
- local raroutes=""
- for route in $RA_ROUTES; do
- local prefix="${route%%/*}"
- local entry="${route#*/}"
- local pmask="${entry%%,*}"
- entry="${entry#*,}"
- local gw="${entry%%,*}"
- [ -z "$gw" -a "$mask" = "$pmask" ] && {
- case "$addr" in
- "${prefix%*::}"*) continue;;
- esac
- }
- raroutes="$raroutes $route"
- done
- RA_ROUTES="$raroutes"
- fi
- done
- for entry in $RA_ROUTES; do
- local duplicate=$NOSOURCEFILTER
- local addr="${entry%%/*}"
- entry="${entry#*/}"
- local mask="${entry%%,*}"
- entry="${entry#*,}"
- local gw="${entry%%,*}"
- entry="${entry#*,}"
- local valid="${entry%%,*}"
- entry="${entry#*,}"
- local metric="${entry%%,*}"
- for xentry in $RA_ROUTES; do
- local xprefix="${xentry%%,*}"
- xentry="${xentry#*,}"
- local xgw="${xentry%%,*}"
- [ -n "$gw" -a -z "$xgw" -a "$addr/$mask" = "$xprefix" ] && duplicate=1
- done
- if [ -z "$gw" -o "$duplicate" = 1 ]; then
- proto_add_ipv6_route "$addr" "$mask" "$gw" "$metric" "$valid"
- else
- for prefix in $PREFIXES $ADDRESSES; do
- local paddr="${prefix%%,*}"
- proto_add_ipv6_route "$addr" "$mask" "$gw" "$metric" "$valid" "$paddr"
- done
- fi
- done
- proto_add_data
- [ -n "$CER" ] && json_add_string cer "$CER"
- [ -n "$PASSTHRU" ] && json_add_string passthru "$PASSTHRU"
- [ -n "$ZONE" ] && json_add_string zone "$ZONE"
- proto_close_data
- proto_send_update "$INTERFACE"
- MAPTYPE=""
- MAPRULE=""
- if [ -n "$MAPE" -a -f /lib/netifd/proto/map.sh ]; then
- MAPTYPE="map-e"
- MAPRULE="$MAPE"
- elif [ -n "$MAPT" -a -f /lib/netifd/proto/map.sh -a -f /proc/net/nat46/control ]; then
- MAPTYPE="map-t"
- MAPRULE="$MAPT"
- elif [ -n "$LW4O6" -a -f /lib/netifd/proto/map.sh ]; then
- MAPTYPE="lw4o6"
- MAPRULE="$LW4O6"
- fi
- [ -n "$ZONE" ] || ZONE=$(fw3 -q network $INTERFACE 2>/dev/null)
- if [ "$IFACE_MAP" != 0 -a -n "$MAPTYPE" -a -n "$MAPRULE" ]; then
- [ -z "$IFACE_MAP" -o "$IFACE_MAP" = 1 ] && IFACE_MAP=${INTERFACE}_4
- json_init
- json_add_string name "$IFACE_MAP"
- json_add_string ifname "@$INTERFACE"
- json_add_string proto map
- json_add_string type "$MAPTYPE"
- json_add_string _prefsig "$prefsig"
- [ "$MAPTYPE" = lw4o6 ] && json_add_string _addrsig "$addrsig"
- json_add_string rule "$MAPRULE"
- json_add_string tunlink "$INTERFACE"
- [ -n "$ZONE_MAP" ] || ZONE_MAP=$ZONE
- [ -n "$ZONE_MAP" ] && json_add_string zone "$ZONE_MAP"
- [ -n "$ENCAPLIMIT_MAP" ] && json_add_string encaplimit "$ENCAPLIMIT_MAP"
- [ -n "$IFACE_MAP_DELEGATE" ] && json_add_boolean delegate "$IFACE_MAP_DELEGATE"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
- elif [ -n "$AFTR" -a "$IFACE_DSLITE" != 0 -a -f /lib/netifd/proto/dslite.sh ]; then
- [ -z "$IFACE_DSLITE" -o "$IFACE_DSLITE" = 1 ] && IFACE_DSLITE=${INTERFACE}_4
- json_init
- json_add_string name "$IFACE_DSLITE"
- json_add_string ifname "@$INTERFACE"
- json_add_string proto "dslite"
- json_add_string peeraddr "$AFTR"
- json_add_string tunlink "$INTERFACE"
- [ -n "$ZONE_DSLITE" ] || ZONE_DSLITE=$ZONE
- [ -n "$ZONE_DSLITE" ] && json_add_string zone "$ZONE_DSLITE"
- [ -n "$ENCAPLIMIT_DSLITE" ] && json_add_string encaplimit "$ENCAPLIMIT_DSLITE"
- [ -n "$IFACE_DSLITE_DELEGATE" ] && json_add_boolean delegate "$IFACE_DSLITE_DELEGATE"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
- elif [ "$IFACE_464XLAT" != 0 -a -f /lib/netifd/proto/464xlat.sh ]; then
- [ -z "$IFACE_464XLAT" -o "$IFACE_464XLAT" = 1 ] && IFACE_464XLAT=${INTERFACE}_4
- json_init
- json_add_string name "$IFACE_464XLAT"
- json_add_string ifname "@$INTERFACE"
- json_add_string proto "464xlat"
- json_add_string tunlink "$INTERFACE"
- json_add_string _addrsig "$addrsig"
- [ -n "$ZONE_464XLAT" ] || ZONE_464XLAT=$ZONE
- [ -n "$ZONE_464XLAT" ] && json_add_string zone "$ZONE_464XLAT"
- [ -n "$IFACE_464XLAT_DELEGATE" ] && json_add_boolean delegate "$IFACE_464XLAT_DELEGATE"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
- fi
- # TODO: $SNTP_IP $SIP_IP $SNTP_FQDN $SIP_DOMAIN
- }
- teardown_interface() {
- proto_init_update "*" 0
- proto_send_update "$INTERFACE"
- }
- case "$2" in
- bound)
- teardown_interface "$1"
- setup_interface "$1"
- ;;
- informed|updated|rebound)
- setup_interface "$1"
- ;;
- ra-updated)
- [ -n "$ADDRESSES$RA_ADDRESSES$PREFIXES$USERPREFIX" ] && setup_interface "$1"
- ;;
- started|stopped|unbound)
- teardown_interface "$1"
- ;;
- esac
- # user rules
- [ -f /etc/odhcp6c.user ] && . /etc/odhcp6c.user "$@"
- exit 0
|