123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- Revert "mtd: pxa3xx-nand: handle PIO in threaded interrupt"
- This reverts commit 24542257a3b987025d4b998ec2d15e556c98ad3f
- This upstream change has been causing spurious timeouts on accesses
- to the NAND flash if something else on the system is causing
- significant latency.
- Nothing guarantees that the thread will run in time, so the
- usual timeout is unreliable.
- Signed-off-by: Felix Fietkau <nbd@nbd.name>
- --- a/drivers/mtd/nand/pxa3xx_nand.c
- +++ b/drivers/mtd/nand/pxa3xx_nand.c
- @@ -791,24 +791,11 @@ static void start_data_dma(struct pxa3xx
- __func__, direction, info->dma_cookie, info->sg.length);
- }
-
- -static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
- -{
- - struct pxa3xx_nand_info *info = data;
- -
- - handle_data_pio(info);
- -
- - info->state = STATE_CMD_DONE;
- - nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
- -
- - return IRQ_HANDLED;
- -}
- -
- static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
- {
- struct pxa3xx_nand_info *info = devid;
- unsigned int status, is_completed = 0, is_ready = 0;
- unsigned int ready, cmd_done;
- - irqreturn_t ret = IRQ_HANDLED;
-
- if (info->cs == 0) {
- ready = NDSR_FLASH_RDY;
- @@ -850,8 +837,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
- } else {
- info->state = (status & NDSR_RDDREQ) ?
- STATE_PIO_READING : STATE_PIO_WRITING;
- - ret = IRQ_WAKE_THREAD;
- - goto NORMAL_IRQ_EXIT;
- + handle_data_pio(info);
- }
- }
- if (status & cmd_done) {
- @@ -896,7 +882,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
- if (is_ready)
- complete(&info->dev_ready);
- NORMAL_IRQ_EXIT:
- - return ret;
- + return IRQ_HANDLED;
- }
-
- static inline int is_buf_blank(uint8_t *buf, size_t len)
- @@ -1865,9 +1851,7 @@ static int alloc_nand_resource(struct pl
- /* initialize all interrupts to be disabled */
- disable_int(info, NDSR_MASK);
-
- - ret = request_threaded_irq(irq, pxa3xx_nand_irq,
- - pxa3xx_nand_irq_thread, IRQF_ONESHOT,
- - pdev->name, info);
- + ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
- goto fail_free_buf;
|