12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849 |
- From b100722a777f6455d913666a376f81342b2cb995 Mon Sep 17 00:00:00 2001
- From: Muna Sinada <quic_msinada@quicinc.com>
- Date: Mon, 17 Apr 2023 13:22:27 -0700
- Subject: [PATCH] wifi: ath11k: Remove disabling of 80+80 and 160 MHz
- This is a regression fix for 80+80 and 160 MHz support bits being
- cleared, therefore not adverised. Remove disable of 80+80 and 160 MHz
- capability flags and assign valid center frequency 2 similar to
- VHT80_80.
- Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware")
- Reported-by: Robert Marko <robert.marko@sartura.hr>
- Tested-by: Robert Marko <robert.marko@sartura.hr> # IPQ8074 WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
- Link: https://bugzilla.kernel.org/show_bug.cgi?id=217299
- Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
- Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
- Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
- Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
- Link: https://lore.kernel.org/r/1681762947-13882-1-git-send-email-quic_msinada@quicinc.com
- ---
- drivers/net/wireless/ath/ath11k/mac.c | 4 ----
- drivers/net/wireless/ath/ath11k/wmi.c | 3 ++-
- 2 files changed, 2 insertions(+), 5 deletions(-)
- --- a/drivers/net/wireless/ath/ath11k/mac.c
- +++ b/drivers/net/wireless/ath/ath11k/mac.c
- @@ -5585,10 +5585,6 @@ static int ath11k_mac_copy_he_cap(struct
-
- he_cap_elem->mac_cap_info[1] &=
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
- - he_cap_elem->phy_cap_info[0] &=
- - ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
- - he_cap_elem->phy_cap_info[0] &=
- - ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
-
- he_cap_elem->phy_cap_info[5] &=
- ~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
- --- a/drivers/net/wireless/ath/ath11k/wmi.c
- +++ b/drivers/net/wireless/ath/ath11k/wmi.c
- @@ -871,7 +871,8 @@ static void ath11k_wmi_put_wmi_channel(s
-
- chan->band_center_freq2 = arg->channel.band_center_freq1;
-
- - } else if (arg->channel.mode == MODE_11AC_VHT80_80) {
- + } else if ((arg->channel.mode == MODE_11AC_VHT80_80) ||
- + (arg->channel.mode == MODE_11AX_HE80_80)) {
- chan->band_center_freq2 = arg->channel.band_center_freq2;
- } else {
- chan->band_center_freq2 = 0;
|