| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- # Kismet drone config file
- version=newcore.1
- # Name of drone server (informational)
- servername=Kismet-Drone
- # Drone configuration
- # Protocol, interface, and port to listen on
- dronelisten=tcp://127.0.0.1:2502
- # Hosts allowed to connect, comma separated. May include netmasks.
- # allowedhosts=127.0.0.1,10.10.10.0/255.255.255.0
- droneallowedhosts=127.0.0.1
- # Maximum number of drone clients
- dronemaxclients=10
- droneringlen=65535
- # Do we have a GPS?
- gps=true
- # Do we use a locally serial attached GPS, or use a gpsd server?
- # (Pick only one)
- gpstype=gpsd
- # gpstype=serial
- # What serial device do we look for the GPS on?
- gpsdevice=/dev/rfcomm0
- # Host:port that GPSD is running on. This can be localhost OR remote!
- gpshost=localhost:2947
- # Do we lock the mode? This overrides coordinates of lock "0", which will
- # generate some bad information until you get a GPS lock, but it will
- # fix problems with GPS units with broken NMEA that report lock 0
- gpsmodelock=false
- # Do we try to reconnect if we lose our link to the GPS, or do we just
- # let it die and be disabled?
- gpsreconnect=true
- # See the README for full information on the new source format
- # ncsource=interface:options
- ncsource=null
- # for example:
- # ncsource=wlan0
- # ncsource=wifi0:type=madwifi
- # ncsource=wlan0:name=intel,hop=false,channel=11
- # Special per-source options
- # sourceopts=[sourcename|*]:opt1,opt2
- # sourceopts=*:fuzzycrypt,weakvalidate
- # Comma-separated list of sources to enable, if you don't want to enable all
- # the sources you defined.
- # enablesource=source1,source2
- # How many channels per second do we hop? (1-10)
- channelvelocity=5
- # By setting the dwell time for channel hopping we override the channelvelocity
- # setting above and dwell on each channel for the given number of seconds.
- #channeldwell=10
- # Users outside the US might want to use this list:
- # channellist=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
- channellist=IEEE80211b:1:3,6:3,11:3,2,7,3,8,4,9,5,10
- # US IEEE 80211a
- channellist=IEEE80211a:36,40,44,48,52,56,60,64,149,153,157,161,165
- # Combo
- channellist=IEEE80211ab:1:3,6:3,11:3,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64,149,153,157,161,165
|
