GnuBee-libreCMC/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch

From bd36739e77669e8df45c38f6acfe2cea511534d9 Mon Sep 17 00:00:00 2001
From: Xiangfu <xiangfu@openmobilefree.net>
Date: Wed, 10 Oct 2012 18:19:41 +0800
Subject: [PATCH 3/6] add mmc support

---
 arch/mips/include/asm/jz4740.h |  166 ++++++
 board/qi/qi_lb60/qi_lb60.c     |    9 +-
 drivers/mmc/Makefile           |    1 +
 drivers/mmc/jz_mmc.c           | 1179 ++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/jz_mmc.h           |  176 ++++++
 include/configs/qi_lb60.h      |    9 +
 include/mmc.h                  |   40 ++
 7 files changed, 1578 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mmc/jz_mmc.c
 create mode 100644 drivers/mmc/jz_mmc.h

diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h
index 7a7cfff..68287fb 100644
--- a/arch/mips/include/asm/jz4740.h
+++ b/arch/mips/include/asm/jz4740.h
@@ -1146,5 +1146,171 @@ extern void sdram_init(void);
 extern void calc_clocks(void);
 extern void rtc_init(void);
 
+/*************************************************************************
+ * MSC
+ *************************************************************************/
+#define REG8(addr)	*((volatile u8 *)(addr))
+#define REG16(addr)	*((volatile u16 *)(addr))
+#define REG32(addr)	*((volatile u32 *)(addr))
+
+#define	CPM_BASE	0xB0000000
+#define CPM_CPCCR	(CPM_BASE+0x00)
+#define CPM_MSCCDR	(CPM_BASE+0x68)
+#define REG_CPM_MSCCDR	REG32(CPM_MSCCDR)
+#define REG_CPM_CPCCR	REG32(CPM_CPCCR)
+
+#define	MSC_BASE	0xB0021000
+
+#define	MSC_STRPCL		(MSC_BASE + 0x000)
+#define	MSC_STAT		(MSC_BASE + 0x004)
+#define	MSC_CLKRT		(MSC_BASE + 0x008)
+#define	MSC_CMDAT		(MSC_BASE + 0x00C)
+#define	MSC_RESTO		(MSC_BASE + 0x010)
+#define	MSC_RDTO		(MSC_BASE + 0x014)
+#define	MSC_BLKLEN		(MSC_BASE + 0x018)
+#define	MSC_NOB			(MSC_BASE + 0x01C)
+#define	MSC_SNOB		(MSC_BASE + 0x020)
+#define	MSC_IMASK		(MSC_BASE + 0x024)
+#define	MSC_IREG		(MSC_BASE + 0x028)
+#define	MSC_CMD			(MSC_BASE + 0x02C)
+#define	MSC_ARG			(MSC_BASE + 0x030)
+#define	MSC_RES			(MSC_BASE + 0x034)
+#define	MSC_RXFIFO		(MSC_BASE + 0x038)
+#define	MSC_TXFIFO		(MSC_BASE + 0x03C)
+
+#define	REG_MSC_STRPCL		REG16(MSC_STRPCL)
+#define	REG_MSC_STAT		REG32(MSC_STAT)
+#define	REG_MSC_CLKRT		REG16(MSC_CLKRT)
+#define	REG_MSC_CMDAT		REG32(MSC_CMDAT)
+#define	REG_MSC_RESTO		REG16(MSC_RESTO)
+#define	REG_MSC_RDTO		REG16(MSC_RDTO)
+#define	REG_MSC_BLKLEN		REG16(MSC_BLKLEN)
+#define	REG_MSC_NOB		REG16(MSC_NOB)
+#define	REG_MSC_SNOB		REG16(MSC_SNOB)
+#define	REG_MSC_IMASK		REG16(MSC_IMASK)
+#define	REG_MSC_IREG		REG16(MSC_IREG)
+#define	REG_MSC_CMD		REG8(MSC_CMD)
+#define	REG_MSC_ARG		REG32(MSC_ARG)
+#define	REG_MSC_RES		REG16(MSC_RES)
+#define	REG_MSC_RXFIFO		REG32(MSC_RXFIFO)
+#define	REG_MSC_TXFIFO		REG32(MSC_TXFIFO)
+
+/* MSC Clock and Control Register (MSC_STRPCL) */
+
+#define MSC_STRPCL_EXIT_MULTIPLE	(1 << 7)
+#define MSC_STRPCL_EXIT_TRANSFER	(1 << 6)
+#define MSC_STRPCL_START_READWAIT	(1 << 5)
+#define MSC_STRPCL_STOP_READWAIT	(1 << 4)
+#define MSC_STRPCL_RESET		(1 << 3)
+#define MSC_STRPCL_START_OP		(1 << 2)
+#define MSC_STRPCL_CLOCK_CONTROL_BIT	0
+#define MSC_STRPCL_CLOCK_CONTROL_MASK	(0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT)
+  #define MSC_STRPCL_CLOCK_CONTROL_STOP	  (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */
+  #define MSC_STRPCL_CLOCK_CONTROL_START  (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */
+
+/* MSC Status Register (MSC_STAT) */
+
+#define MSC_STAT_IS_RESETTING		(1 << 15)
+#define MSC_STAT_SDIO_INT_ACTIVE	(1 << 14)
+#define MSC_STAT_PRG_DONE		(1 << 13)
+#define MSC_STAT_DATA_TRAN_DONE		(1 << 12)
+#define MSC_STAT_END_CMD_RES		(1 << 11)
+#define MSC_STAT_DATA_FIFO_AFULL	(1 << 10)
+#define MSC_STAT_IS_READWAIT		(1 << 9)
+#define MSC_STAT_CLK_EN			(1 << 8)
+#define MSC_STAT_DATA_FIFO_FULL		(1 << 7)
+#define MSC_STAT_DATA_FIFO_EMPTY	(1 << 6)
+#define MSC_STAT_CRC_RES_ERR		(1 << 5)
+#define MSC_STAT_CRC_READ_ERROR		(1 << 4)
+#define MSC_STAT_CRC_WRITE_ERROR_BIT	2
+#define MSC_STAT_CRC_WRITE_ERROR_MASK	(0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT)
+  #define MSC_STAT_CRC_WRITE_ERROR_NO		(0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */
+  #define MSC_STAT_CRC_WRITE_ERROR		(1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */
+  #define MSC_STAT_CRC_WRITE_ERROR_NOSTS	(2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */
+#define MSC_STAT_TIME_OUT_RES		(1 << 1)
+#define MSC_STAT_TIME_OUT_READ		(1 << 0)
+
+/* MSC Bus Clock Control Register (MSC_CLKRT) */
+
+#define	MSC_CLKRT_CLK_RATE_BIT		0
+#define	MSC_CLKRT_CLK_RATE_MASK		(0x7 << MSC_CLKRT_CLK_RATE_BIT)
+  #define MSC_CLKRT_CLK_RATE_DIV_1	  (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_2	  (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_4	  (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_8	  (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_16	  (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_32	  (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_64	  (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */
+  #define MSC_CLKRT_CLK_RATE_DIV_128	  (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */
+
+/* MSC Command Sequence Control Register (MSC_CMDAT) */
+
+#define	MSC_CMDAT_IO_ABORT	(1 << 11)
+#define	MSC_CMDAT_BUS_WIDTH_BIT	9
+#define	MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT)
+#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT)
+#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT)
+#define	MSC_CMDAT_DMA_EN	(1 << 8)
+#define	MSC_CMDAT_INIT		(1 << 7)
+#define	MSC_CMDAT_BUSY		(1 << 6)
+#define	MSC_CMDAT_STREAM_BLOCK	(1 << 5)
+#define	MSC_CMDAT_WRITE		(1 << 4)
+#define	MSC_CMDAT_READ		(0 << 4)
+#define	MSC_CMDAT_DATA_EN	(1 << 3)
+#define	MSC_CMDAT_RESPONSE_BIT	0
+#define	MSC_CMDAT_RESPONSE_MASK	(0x7 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_NONE	(0x0 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R1	(0x1 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R2	(0x2 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R3	(0x3 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R4	(0x4 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R5	(0x5 << MSC_CMDAT_RESPONSE_BIT)
+#define MSC_CMDAT_RESPONSE_R6	(0x6 << MSC_CMDAT_RESPONSE_BIT)
+
+/* MSC Interrupts Mask Register (MSC_IMASK) */
+#define	MSC_IMASK_SDIO			(1 << 7)
+#define	MSC_IMASK_TXFIFO_WR_REQ		(1 << 6)
+#define	MSC_IMASK_RXFIFO_RD_REQ		(1 << 5)
+#define	MSC_IMASK_END_CMD_RES		(1 << 2)
+#define	MSC_IMASK_PRG_DONE		(1 << 1)
+#define	MSC_IMASK_DATA_TRAN_DONE	(1 << 0)
+
+
+/* MSC Interrupts Status Register (MSC_IREG) */
+#define	MSC_IREG_SDIO			(1 << 7)
+#define	MSC_IREG_TXFIFO_WR_REQ		(1 << 6)
+#define	MSC_IREG_RXFIFO_RD_REQ		(1 << 5)
+#define	MSC_IREG_END_CMD_RES		(1 << 2)
+#define	MSC_IREG_PRG_DONE		(1 << 1)
+#define	MSC_IREG_DATA_TRAN_DONE		(1 << 0)
+
+static __inline__ unsigned int __cpm_get_pllout2(void)
+{
+	if (REG_CPM_CPCCR & CPM_CPCCR_PCS)
+		return __cpm_get_pllout();
+	else
+		return __cpm_get_pllout()/2;
+}
+
+static inline void __cpm_select_msc_clk(int sd)
+{
+	unsigned int pllout2 = __cpm_get_pllout2();
+	unsigned int div = 0;
+
+	if (sd) {
+		div = pllout2 / 24000000;
+	}
+	else {
+		div = pllout2 / 16000000;
+	}
+
+	REG_CPM_MSCCDR = div - 1;
+}
+#define __msc_reset() 						\
+do { 								\
+	REG_MSC_STRPCL = MSC_STRPCL_RESET;			\
+ 	while (REG_MSC_STAT & MSC_STAT_IS_RESETTING);		\
+} while (0)
+
 #endif	/* !__ASSEMBLY__ */
 #endif	/* __JZ4740_H__ */
diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
index 3bd4e2f..a2ba648 100644
--- a/board/qi/qi_lb60/qi_lb60.c
+++ b/board/qi/qi_lb60/qi_lb60.c
@@ -40,8 +40,13 @@ static void gpio_init(void)
 		__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
 	}
 
-	__gpio_as_input(GPIO_KEYIN_8);
-	__gpio_enable_pull(GPIO_KEYIN_8);
+	if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
+		printf("[S] pressed, enable UART0\n");
+		__gpio_as_uart0();
+	} else {
+		__gpio_as_input(GPIO_KEYIN_8);
+		__gpio_enable_pull(GPIO_KEYIN_8);
+	}
 
 	/* enable the TP4, TP5 as UART0 */
 	__gpio_jtag_to_uart0();
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 565ba6a..3c717b1 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -47,6 +47,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o
 COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
+COBJS-$(CONFIG_JZ4740_MMC) += jz_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c
new file mode 100644
index 0000000..642cecc
--- /dev/null
+++ b/drivers/mmc/jz_mmc.c
@@ -0,0 +1,1179 @@
+/*
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/jz4740.h>
+#include "jz_mmc.h"
+
+static int sd2_0 = 0;
+static int mmc_ready = 0;
+static int use_4bit;		/* Use 4-bit data bus */
+/*
+ *  MMC Events
+ */
+#define MMC_EVENT_NONE	        0x00	/* No events */
+#define MMC_EVENT_RX_DATA_DONE	0x01	/* Rx data done */
+#define MMC_EVENT_TX_DATA_DONE	0x02	/* Tx data done */
+#define MMC_EVENT_PROG_DONE	0x04	/* Programming is done */
+
+
+#define MMC_IRQ_MASK()				\
+do {						\
+      	REG_MSC_IMASK = 0xffff;			\
+      	REG_MSC_IREG = 0xffff;			\
+} while (0)
+
+/*
+ * GPIO definition
+ */
+#if defined(CONFIG_SAKC)
+
+#define __msc_init_io()				\
+do {						\
+	__gpio_as_input(GPIO_SD_CD_N);		\
+} while (0)
+
+#else
+#define __msc_init_io()				\
+do {						\
+	__gpio_as_output(GPIO_SD_VCC_EN_N);	\
+	__gpio_as_input(GPIO_SD_CD_N);		\
+} while (0)
+
+#define __msc_enable_power()			\
+do {						\
+	__gpio_clear_pin(GPIO_SD_VCC_EN_N);	\
+} while (0)
+
+#define __msc_disable_power()			\
+do {						\
+	__gpio_set_pin(GPIO_SD_VCC_EN_N);	\
+} while (0)
+	
+#endif /* CONFIG_SAKE */
+
+#define __msc_card_detected()			\
+({						\
+	int detected = 1;			\
+	__gpio_as_input(GPIO_SD_CD_N);		\
+	__gpio_disable_pull(GPIO_SD_CD_N);	\
+	if (!__gpio_get_pin(GPIO_SD_CD_N))	\
+		detected = 0;			\
+	detected;				\
+})
+
+/*
+ * Local functions
+ */
+
+extern int
+fat_register_device(block_dev_desc_t *dev_desc, int part_no);
+
+static block_dev_desc_t mmc_dev;
+
+block_dev_desc_t * mmc_get_dev(int dev)
+{
+	return ((block_dev_desc_t *)&mmc_dev);
+}
+
+/* Stop the MMC clock and wait while it happens */
+static inline int jz_mmc_stop_clock(void)
+{
+	int timeout = 1000;
+
+	REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
+
+	while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
+		timeout--;
+		if (timeout == 0)
+			return MMC_ERROR_TIMEOUT;
+		udelay(1);
+	}
+        return MMC_NO_ERROR;
+}
+
+/* Start the MMC clock and operation */
+static inline int jz_mmc_start_clock(void)
+{
+	REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
+	return MMC_NO_ERROR;
+}
+
+static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
+{
+	u32 clkrt = 0;
+	u32 clk_src = is_sd ? 24000000 : 16000000;
+
+  	while (rate < clk_src) {
+      		clkrt ++;
+      		clk_src >>= 1;
+    	}
+
+	return clkrt;
+}
+
+/* Set the MMC clock frequency */
+void jz_mmc_set_clock(int sd, u32 rate)
+{
+	jz_mmc_stop_clock();
+
+	/* Select clock source of MSC */
+	__cpm_select_msc_clk(sd);
+
+	/* Set clock dividor of MSC */
+	REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
+}
+
+static int jz_mmc_check_status(struct mmc_request *request)
+{
+	u32 status = REG_MSC_STAT;
+
+	/* Checking for response or data timeout */
+	if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
+		printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
+		return MMC_ERROR_TIMEOUT;
+	}
+
+	/* Checking for CRC error */
+	if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
+		printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
+		return MMC_ERROR_CRC;
+	}
+
+	return MMC_NO_ERROR;
+}
+
+/* Obtain response to the command and store it to response buffer */
+static void jz_mmc_get_response(struct mmc_request *request)
+{
+	int i;
+	u8 *buf;
+	u32 data;
+
+	debug("fetch response for request %d, cmd %d\n", 
+	      request->rtype, request->cmd);
+
+	buf = request->response;
+	request->result = MMC_NO_ERROR;
+
+	switch (request->rtype) {
+	case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
+	case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
+	{
+		data = REG_MSC_RES;
+		buf[0] = (data >> 8) & 0xff;
+		buf[1] = data & 0xff;
+		data = REG_MSC_RES;
+		buf[2] = (data >> 8) & 0xff;
+		buf[3] = data & 0xff;
+		data = REG_MSC_RES;
+		buf[4] = data & 0xff;
+
+		debug("request %d, response [%02x %02x %02x %02x %02x]\n",
+		      request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
+		break;
+	}
+	case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
+	{
+		for (i = 0; i < 16; i += 2) {
+			data = REG_MSC_RES;
+			buf[i] = (data >> 8) & 0xff;
+			buf[i+1] = data & 0xff;
+		}
+		debug("request %d, response [", request->rtype);
+#if CONFIG_MMC_DEBUG_VERBOSE > 2
+		if (g_mmc_debug >= 3) {
+			int n;
+			for (n = 0; n < 17; n++)
+				printk("%02x ", buf[n]);
+			printk("]\n");
+		}
+#endif
+		break;
+	}
+	case RESPONSE_NONE:
+		debug("No response\n");
+		break;
+
+	default:
+		debug("unhandled response type for request %d\n", request->rtype);
+		break;
+	}
+}
+
+static int jz_mmc_receive_data(struct mmc_request *req)
+{
+	u32  stat, timeout, data, cnt;
+	u8 *buf = req->buffer;
+	u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+
+	timeout = 0x3ffffff;
+
+	while (timeout) {
+		timeout--;
+		stat = REG_MSC_STAT;
+
+		if (stat & MSC_STAT_TIME_OUT_READ)
+			return MMC_ERROR_TIMEOUT;
+		else if (stat & MSC_STAT_CRC_READ_ERROR)
+			return MMC_ERROR_CRC;
+		else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
+			 || (stat & MSC_STAT_DATA_FIFO_AFULL)) {
+			/* Ready to read data */
+			break;
+		}
+		udelay(1);
+	}
+	if (!timeout)
+		return MMC_ERROR_TIMEOUT;
+
+	/* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
+	cnt = wblocklen;
+	while (cnt) {
+		data = REG_MSC_RXFIFO;
+		{
+			*buf++ = (u8)(data >> 0);
+			*buf++ = (u8)(data >> 8);
+			*buf++ = (u8)(data >> 16);
+			*buf++ = (u8)(data >> 24);
+		}
+		cnt --;
+		while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
+			;
+	}
+	return MMC_NO_ERROR;
+}
+
+static int jz_mmc_transmit_data(struct mmc_request *req)
+{
+#if 0
+	u32 nob = req->nob;
+	u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+	u8 *buf = req->buffer;
+	u32 *wbuf = (u32 *)buf;
+	u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
+	u32 stat, timeout, data, cnt;
+
+	for (nob; nob >= 1; nob--) {
+		timeout = 0x3FFFFFF;
+
+		while (timeout) {
+			timeout--;
+			stat = REG_MSC_STAT;
+
+			if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
+				return MMC_ERROR_CRC;
+			else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
+				/* Ready to write data */
+				break;
+			}
+
+			udelay(1);
+		}
+
+		if (!timeout)
+			return MMC_ERROR_TIMEOUT;
+
+		/* Write data to TXFIFO */
+		cnt = wblocklen;
+		while (cnt) {
+			while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
+				;
+
+			if (waligned) {
+				REG_MSC_TXFIFO = *wbuf++;
+			}
+			else {
+				data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
+				REG_MSC_TXFIFO = data;
+			}
+
+			cnt--;
+		}
+	}
+#endif
+	return MMC_NO_ERROR;
+}
+
+
+/*
+ * Name:	  int jz_mmc_exec_cmd()
+ * Function:      send command to the card, and get a response
+ * Input:	  struct mmc_request *req	: MMC/SD request
+ * Output:	  0:  right		>0:  error code
+ */
+int jz_mmc_exec_cmd(struct mmc_request *request)
+{
+	u32 cmdat = 0, events = 0;
+	int retval, timeout = 0x3fffff;
+
+	/* Indicate we have no result yet */
+	request->result = MMC_NO_RESPONSE;
+	if (request->cmd == MMC_CIM_RESET) {
+		/* On reset, 1-bit bus width */
+		use_4bit = 0;
+
+		/* Reset MMC/SD controller */
+		__msc_reset();
+
+		/* On reset, drop MMC clock down */
+		jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
+
+		/* On reset, stop MMC clock */
+		jz_mmc_stop_clock();
+	}
+	if (request->cmd == MMC_CMD_SEND_OP_COND) {
+		debug("Have an MMC card\n");
+		/* always use 1bit for MMC */
+		use_4bit = 0;
+	}
+	if (request->cmd == SET_BUS_WIDTH) {
+		if (request->arg == 0x2) {
+			printf("Use 4-bit bus width\n");
+			use_4bit = 1;
+		} else {
+			printf("Use 1-bit bus width\n");
+			use_4bit = 0;
+		}
+	}
+
+	/* stop clock */
+	jz_mmc_stop_clock();
+
+	/* mask all interrupts */
+	REG_MSC_IMASK = 0xffff;
+
+	/* clear status */
+	REG_MSC_IREG = 0xffff;
+
+	/* use 4-bit bus width when possible */
+	if (use_4bit)
+		cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
+
+        /* Set command type and events */
+	switch (request->cmd) {
+	/* MMC core extra command */
+	case MMC_CIM_RESET:
+		cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
+		break;
+
+	/* bc - broadcast - no response */
+	case MMC_CMD_GO_IDLE_STATE:
+	case MMC_CMD_SET_DSR:
+		break;
+
+	/* bcr - broadcast with response */
+	case MMC_CMD_SEND_OP_COND:
+	case MMC_CMD_ALL_SEND_CID:
+	case MMC_GO_IRQ_STATE:
+		break;
+
+	/* adtc - addressed with data transfer */
+	case MMC_READ_DAT_UNTIL_STOP:
+	case MMC_CMD_READ_SINGLE_BLOCK:
+	case MMC_CMD_READ_MULTIPLE_BLOCK:
+	case SD_CMD_APP_SEND_SCR:
+		cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
+		events = MMC_EVENT_RX_DATA_DONE;
+		break;
+
+	case MMC_WRITE_DAT_UNTIL_STOP:
+	case MMC_CMD_WRITE_SINGLE_BLOCK:
+	case MMC_CMD_WRITE_MULTIPLE_BLOCK:
+	case MMC_PROGRAM_CID:
+	case MMC_PROGRAM_CSD:
+	case MMC_SEND_WRITE_PROT:
+	case MMC_GEN_CMD:
+	case MMC_LOCK_UNLOCK:
+		cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
+		events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
+
+		break;
+
+	case MMC_CMD_STOP_TRANSMISSION:
+		events = MMC_EVENT_PROG_DONE;
+		break;
+
+	/* ac - no data transfer */
+	default:
+		break;
+	}
+
+	/* Set response type */
+	switch (request->rtype) {
+	case RESPONSE_NONE:
+		break;
+
+	case RESPONSE_R1B:
+		cmdat |= MSC_CMDAT_BUSY;
+		/*FALLTHRU*/
+	case RESPONSE_R1:
+		cmdat |= MSC_CMDAT_RESPONSE_R1;
+		break;
+	case RESPONSE_R2_CID:
+	case RESPONSE_R2_CSD:
+		cmdat |= MSC_CMDAT_RESPONSE_R2;
+		break;
+	case RESPONSE_R3:
+		cmdat |= MSC_CMDAT_RESPONSE_R3;
+		break;
+	case RESPONSE_R4:
+		cmdat |= MSC_CMDAT_RESPONSE_R4;
+		break;
+	case RESPONSE_R5:
+		cmdat |= MSC_CMDAT_RESPONSE_R5;
+		break;
+	case RESPONSE_R6:
+		cmdat |= MSC_CMDAT_RESPONSE_R6;
+		break;
+	default:
+		break;
+	}
+
+	/* Set command index */
+	if (request->cmd == MMC_CIM_RESET) {
+		REG_MSC_CMD = MMC_CMD_GO_IDLE_STATE;
+	} else {
+		REG_MSC_CMD = request->cmd;
+	}
+
+        /* Set argument */
+	REG_MSC_ARG = request->arg;
+
+	/* Set block length and nob */
+	if (request->cmd == SD_CMD_APP_SEND_SCR) { /* get SCR from DataFIFO */
+		REG_MSC_BLKLEN = 8;
+		REG_MSC_NOB = 1;
+	} else {
+		REG_MSC_BLKLEN = request->block_len;
+		REG_MSC_NOB = request->nob;
+	}
+
+	/* Set command */
+	REG_MSC_CMDAT = cmdat;
+
+	debug("Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
+	      cmdat, request->arg, request->rtype);
+
+        /* Start MMC/SD clock and send command to card */
+	jz_mmc_start_clock();
+
+	/* Wait for command completion */
+	while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
+		;
+
+	if (timeout == 0)
+		return MMC_ERROR_TIMEOUT;
+
+	REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
+
+	/* Check for status */
+	retval = jz_mmc_check_status(request);
+	if (retval) {
+		return retval;
+	}
+
+	/* Complete command with no response */
+	if (request->rtype == RESPONSE_NONE) {
+		return MMC_NO_ERROR;
+	}
+
+	/* Get response */
+	jz_mmc_get_response(request);
+
+	/* Start data operation */
+	if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
+		if (events & MMC_EVENT_RX_DATA_DONE) {
+			if (request->cmd == SD_CMD_APP_SEND_SCR) {
+				/* SD card returns SCR register as data.
+				   MMC core expect it in the response buffer,
+				   after normal response. */
+				request->buffer = (u8 *)((u32)request->response + 5);
+			}
+			jz_mmc_receive_data(request);
+		}
+
+		if (events & MMC_EVENT_TX_DATA_DONE) {
+			jz_mmc_transmit_data(request);
+		}
+
+		/* Wait for Data Done */
+		while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
+			;
+		REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
+	}
+
+	/* Wait for Prog Done event */
+	if (events & MMC_EVENT_PROG_DONE) {
+		while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
+			;
+		REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
+	}
+
+	/* Command completed */
+
+	return MMC_NO_ERROR;			 /* return successfully */
+}
+
+int mmc_block_read(u8 *dst, ulong src, ulong len)
+{
+
+	struct mmc_request request;
+	struct mmc_response_r1 r1;
+	int retval = 0;
+
+	if (len == 0)
+		goto exit;
+
+	mmc_simple_cmd(&request, MMC_CMD_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
+	retval = mmc_unpack_r1(&request, &r1, 0);
+	if (retval && (retval != MMC_ERROR_STATE_MISMATCH))
+		goto exit;
+
+	mmc_simple_cmd(&request, MMC_CMD_SET_BLOCKLEN, len, RESPONSE_R1);
+	if (retval = mmc_unpack_r1(&request, &r1, 0))
+		goto exit;
+
+	if (!sd2_0)
+		src *= mmcinfo.block_len;
+
+	mmc_send_cmd(&request, MMC_CMD_READ_SINGLE_BLOCK, src, 1, len, RESPONSE_R1, dst);
+	if (retval = mmc_unpack_r1(&request, &r1, 0))
+		goto exit;
+
+exit:
+	return retval;
+}
+
+ulong mmc_bread(int dev_num, ulong blkstart, ulong blkcnt, ulong *dst)
+{
+	if (!mmc_ready) {
+		printf("Please initial the MMC first\n");
+		return -1;
+	}
+
+	int i = 0;
+	ulong dst_tmp = dst;
+ 
+	for (i = 0; i < blkcnt; i++) {
+		if ((mmc_block_read((uchar *)(dst_tmp), blkstart, mmcinfo.block_len)) < 0)
+			return -1;
+
+		dst_tmp += mmcinfo.block_len;
+		blkstart++;
+	}
+ 
+	return i;
+}
+
+int mmc_select_card(void)
+{
+	struct mmc_request request;
+	struct mmc_response_r1 r1;
+	int retval;
+
+	mmc_simple_cmd(&request, MMC_CMD_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
+	retval = mmc_unpack_r1(&request, &r1, 0);
+	if (retval) {
+		return retval;
+	}
+
+	if (mmcinfo.sd) {
+		mmc_simple_cmd(&request, MMC_CMD_APP_CMD,  mmcinfo.rca, RESPONSE_R1);
+		retval = mmc_unpack_r1(&request,&r1,0);
+		if (retval) {
+			return retval;
+		}
+#if defined(MMC_BUS_WIDTH_1BIT)		
+		mmc_simple_cmd(&request, SET_BUS_WIDTH, 1, RESPONSE_R1);
+#else
+		mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
+#endif
+                retval = mmc_unpack_r1(&request,&r1,0);
+                if (retval) {
+			return retval;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Configure card
+ */
+static void mmc_configure_card(void)
+{
+	u32 rate;
+
+	/* Get card info */
+	if (sd2_0)
+		mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
+	else
+		mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
+
+	mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
+
+	mmc_dev.if_type = IF_TYPE_SD;
+	mmc_dev.part_type = PART_TYPE_DOS;
+	mmc_dev.dev = 0;
+	mmc_dev.lun = 0;
+	mmc_dev.type = 0;
+	mmc_dev.blksz = mmcinfo.block_len;
+	mmc_dev.lba = mmcinfo.block_num;
+	mmc_dev.removable = 0;
+
+	printf("%s Detected: %lu blocks of %lu bytes\n",
+	       sd2_0 == 1 ? "SDHC" : "SD",
+	       mmc_dev.lba,
+	       mmc_dev.blksz);
+
+	/* Fix the clock rate */
+	rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
+	if (rate < MMC_CLOCK_SLOW)
+		rate = MMC_CLOCK_SLOW;
+	if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
+		rate = MMC_CLOCK_FAST;
+        if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
+		rate = SD_CLOCK_FAST;
+
+	debug("%s: block_len=%d block_num=%d rate=%d\n", 
+	      __func__, mmcinfo.block_len, mmcinfo.block_num, rate);
+
+	jz_mmc_set_clock(mmcinfo.sd, rate);
+}
+
+/*
+ * State machine routines to initialize card(s)
+ */
+
+/*
+  CIM_SINGLE_CARD_ACQ  (frequency at 400 kHz)
+  --- Must enter from GO_IDLE_STATE ---
+  1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
+  2. SEND_OP_COND (Full Range) [CMD1]   {optional}
+  3. SEND_OP_COND (Set Range ) [CMD1]
+     If busy, delay and repeat step 2
+  4. ALL_SEND_CID              [CMD2]
+     If timeout, set an error (no cards found)
+  5. SET_RELATIVE_ADDR         [CMD3]
+  6. SEND_CSD                  [CMD9]
+  7. SET_DSR                   [CMD4]    Only call this if (csd.dsr_imp).
+  8. Set clock frequency (check available in csd.tran_speed)
+ */
+
+#define MMC_INIT_DOING   0
+#define MMC_INIT_PASSED  1
+#define MMC_INIT_FAILED  2
+
+static int mmc_init_card_state(struct mmc_request *request)
+{
+	struct mmc_response_r1 r1;
+	struct mmc_response_r3 r3;
+	int retval;
+	int ocr = 0x40300000;
+	int limit_41 = 0;
+
+	switch (request->cmd) {
+	case MMC_CMD_GO_IDLE_STATE: /* No response to parse */
+		if (mmcinfo.sd)
+			mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
+		else
+			mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+		break;
+
+	case 8:
+        	retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+		mmc_simple_cmd(request, MMC_CMD_APP_CMD,  0, RESPONSE_R1);
+		break;
+
+        case MMC_CMD_APP_CMD:
+        	retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+		if (retval & (limit_41 < 100)) {
+			debug("%s: unable to MMC_APP_CMD error=%d (%s)\n", 
+			      __func__, retval, mmc_result_to_string(retval));
+			limit_41++;
+			mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3);
+		} else if (limit_41 < 100) {
+			limit_41++;
+			mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3);
+		} else{
+			/* reset the card to idle*/
+			mmc_simple_cmd(request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE);
+			mmcinfo.sd = 0;
+		}
+		break;
+
+        case SD_CMD_APP_SEND_OP_COND:
+                retval = mmc_unpack_r3(request, &r3);
+                if (retval) {
+			debug("%s: try MMC card\n", __func__);
+			mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+			break;
+		}
+
+                debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr);
+
+		if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
+			udelay(50000);
+			mmc_simple_cmd(request, MMC_CMD_APP_CMD, 0, RESPONSE_R1);
+		} else {
+			mmcinfo.sd = 1; /* SD Card ready */
+			mmcinfo.state = CARD_STATE_READY;
+			mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+		}
+		break;
+
+	case MMC_CMD_SEND_OP_COND:
+		retval = mmc_unpack_r3(request, &r3);
+		if (retval) {
+			debug("%s: failed SEND_OP_COND error=%d (%s)\n", 
+			      __func__, retval, mmc_result_to_string(retval));
+			return MMC_INIT_FAILED;
+		}
+
+		debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr);
+		if (!(r3.ocr & MMC_CARD_BUSY)) {
+	                mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+		} else {
+		        mmcinfo.sd = 0; /* MMC Card ready */
+			mmcinfo.state = CARD_STATE_READY;
+			mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+		}
+		break;
+
+	case MMC_CMD_ALL_SEND_CID: 
+		retval = mmc_unpack_cid( request, &mmcinfo.cid );
+		/*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+		if ( retval && (retval != MMC_ERROR_CRC)) {
+			debug("mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n", 
+			      retval, mmc_result_to_string(retval));
+			return MMC_INIT_FAILED;
+		}
+		mmcinfo.state = CARD_STATE_IDENT;
+		if(mmcinfo.sd)
+			mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
+                else
+			mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
+		break;
+
+        case MMC_CMD_SET_RELATIVE_ADDR:
+	        if (mmcinfo.sd)	{
+			retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
+			mmcinfo.rca = mmcinfo.rca << 16; 
+			debug("%s: Get RCA from SD: 0x%04x Status: %x\n",
+			      __func__, mmcinfo.rca, r1.status);
+                } else {
+			retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+			mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
+	        }
+		if (retval) {
+			debug("%s: unable to SET_RELATIVE_ADDR error=%d (%s)\n", 
+			      __func__, retval, mmc_result_to_string(retval));
+			return MMC_INIT_FAILED;
+		}
+
+		mmcinfo.state = CARD_STATE_STBY;
+                mmc_simple_cmd(request, MMC_CMD_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
+
+		break;
+
+	case MMC_CMD_SEND_CSD:
+		retval = mmc_unpack_csd(request, &mmcinfo.csd);
+		mmc_ready = 1;
+		/*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+	        if (retval && (retval != MMC_ERROR_CRC)) {
+			debug("%s: unable to SEND_CSD error=%d (%s)\n", 
+			      __func__, retval, mmc_result_to_string(retval));
+			return MMC_INIT_FAILED;
+		}
+		if (mmcinfo.csd.dsr_imp) {
+			debug("%s: driver doesn't support setting DSR\n", __func__);
+		}
+		mmc_configure_card();
+		return MMC_INIT_PASSED;
+
+	default:
+		debug("%s: error!  Illegal last cmd %d\n", __func__, request->cmd);
+		return MMC_INIT_FAILED;
+	}
+
+	return MMC_INIT_DOING;
+}
+
+int mmc_init_card(void)
+{
+	struct mmc_request request;
+	int retval;
+
+	mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
+	mmc_simple_cmd(&request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE);
+	mmcinfo.sd = 1;  /* assuming a SD card */
+
+	while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
+		;
+
+	if (retval == MMC_INIT_PASSED)
+		return MMC_NO_ERROR;
+	else
+		return MMC_NO_RESPONSE;
+}
+
+int mmc_legacy_init(int verbose)
+{
+	if (!__msc_card_detected())
+		return 1;
+
+	/* Step-1: init GPIO */
+	__gpio_as_msc();
+	__msc_init_io();
+
+	/* Step-2: turn on power of card */
+#if !defined(CONFIG_SAKC)
+	__msc_enable_power();
+#endif
+
+	/* Step-3: Reset MSC Controller. */
+	__msc_reset();
+
+	/* Step-3: mask all IRQs. */
+	MMC_IRQ_MASK();
+
+	/* Step-4: stop MMC/SD clock */
+	jz_mmc_stop_clock();
+	mmc_init_card();
+	mmc_select_card();
+
+	mmc_dev.block_read = mmc_bread;
+	fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
+
+	return 0;
+}
+
+/*
+ * Debugging functions
+ */
+static char * mmc_result_strings[] = {
+	"NO_RESPONSE",
+	"NO_ERROR",
+	"ERROR_OUT_OF_RANGE",
+	"ERROR_ADDRESS",
+	"ERROR_BLOCK_LEN",
+	"ERROR_ERASE_SEQ",
+	"ERROR_ERASE_PARAM",
+	"ERROR_WP_VIOLATION",
+	"ERROR_CARD_IS_LOCKED",
+	"ERROR_LOCK_UNLOCK_FAILED",
+	"ERROR_COM_CRC",
+	"ERROR_ILLEGAL_COMMAND",
+	"ERROR_CARD_ECC_FAILED",
+	"ERROR_CC",
+	"ERROR_GENERAL",
+	"ERROR_UNDERRUN",
+	"ERROR_OVERRUN",
+	"ERROR_CID_CSD_OVERWRITE",
+	"ERROR_STATE_MISMATCH",
+	"ERROR_HEADER_MISMATCH",
+	"ERROR_TIMEOUT",
+	"ERROR_CRC",
+	"ERROR_DRIVER_FAILURE",
+};
+
+char * mmc_result_to_string(int i)
+{
+	return mmc_result_strings[i+1];
+}
+
+static char * card_state_strings[] = {
+	"empty",
+	"idle",
+	"ready",
+	"ident",
+	"stby",
+	"tran",
+	"data",
+	"rcv",
+	"prg",
+	"dis",
+};
+
+static inline char * card_state_to_string(int i)
+{
+	return card_state_strings[i+1];
+}
+
+/*
+ * Utility functions
+ */
+
+#define PARSE_U32(_buf,_index) \
+	(((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
+        (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
+
+#define PARSE_U16(_buf,_index) \
+	(((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
+
+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
+{
+	u8 *buf = request->response;
+	int num = 0;
+
+	if (request->result)
+		return request->result;
+
+	if (buf[0] != 0x3f)
+		return MMC_ERROR_HEADER_MISMATCH;
+
+	csd->csd_structure = (buf[1] & 0xc0) >> 6;
+	if (csd->csd_structure)
+		sd2_0 = 1;
+	else
+		sd2_0 = 0;
+
+	switch (csd->csd_structure) {
+	case 0 :/* Version 1.01-1.10
+		 * Version 2.00/Standard Capacity */
+		csd->taac               = buf[2];
+		csd->nsac               = buf[3];
+		csd->tran_speed         = buf[4];
+		csd->ccc                = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+		csd->read_bl_len        = buf[6] & 0x0f;
+		/* for support 2GB card*/
+		if (csd->read_bl_len >= 10)
+		{
+			num = csd->read_bl_len - 9;
+			csd->read_bl_len = 9;
+		}
+
+		csd->read_bl_partial    = (buf[7] & 0x80) ? 1 : 0;
+		csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
+		csd->read_blk_misalign  = (buf[7] & 0x20) ? 1 : 0;
+		csd->dsr_imp            = (buf[7] & 0x10) ? 1 : 0;
+		csd->c_size             = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
+
+		if (num)
+			csd->c_size = csd->c_size << num;
+
+
+		csd->vdd_r_curr_min     = (buf[9] & 0x38) >> 3;
+		csd->vdd_r_curr_max     = buf[9] & 0x07;
+		csd->vdd_w_curr_min     = (buf[10] & 0xe0) >> 5;
+		csd->vdd_w_curr_max     = (buf[10] & 0x1c) >> 2;
+		csd->c_size_mult        = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
+		csd->sector_size    = (buf[11] & 0x7c) >> 2;
+		csd->erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
+		csd->wp_grp_size        = buf[12] & 0x1f;
+		csd->wp_grp_enable      = (buf[13] & 0x80) ? 1 : 0;
+		csd->default_ecc        = (buf[13] & 0x60) >> 5;
+		csd->r2w_factor         = (buf[13] & 0x1c) >> 2;
+		csd->write_bl_len       = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
+		if (csd->write_bl_len >= 10)
+			csd->write_bl_len = 9;
+
+		csd->write_bl_partial   = (buf[14] & 0x20) ? 1 : 0;
+		csd->file_format_grp    = (buf[15] & 0x80) ? 1 : 0;
+		csd->copy               = (buf[15] & 0x40) ? 1 : 0;
+		csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+		csd->tmp_write_protect  = (buf[15] & 0x10) ? 1 : 0;
+		csd->file_format        = (buf[15] & 0x0c) >> 2;
+		csd->ecc                = buf[15] & 0x03;
+		break;
+	case 1 :	/* Version 2.00/High Capacity */
+		csd->taac               = 0;
+		csd->nsac               = 0;
+		csd->tran_speed         = buf[4];
+		csd->ccc                = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+
+		csd->read_bl_len        = 9;
+		csd->read_bl_partial    = 0;
+		csd->write_blk_misalign = 0;
+		csd->read_blk_misalign  = 0;
+		csd->dsr_imp            = (buf[7] & 0x10) ? 1 : 0;
+		csd->c_size             = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
+		csd->sector_size	= 0x7f;
+		csd->erase_grp_size	= 0;
+		csd->wp_grp_size        = 0;
+		csd->wp_grp_enable      = 0;
+		csd->default_ecc        = (buf[13] & 0x60) >> 5;
+		csd->r2w_factor         = 4;/* Unused */
+		csd->write_bl_len       = 9;
+
+		csd->write_bl_partial   = 0;
+		csd->file_format_grp    = 0;
+		csd->copy               = (buf[15] & 0x40) ? 1 : 0;
+		csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+		csd->tmp_write_protect  = (buf[15] & 0x10) ? 1 : 0;
+		csd->file_format        = 0;
+		csd->ecc                = buf[15] & 0x03;
+	}
+
+	return 0;
+}
+
+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
+{
+	u8 *buf = request->response;
+
+	if (request->result)
+		return request->result;
+
+	r1->cmd    = buf[0];
+	r1->status = PARSE_U32(buf,1);
+
+	debug("mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
+
+	if (R1_STATUS(r1->status)) {
+		if (r1->status & R1_OUT_OF_RANGE)       return MMC_ERROR_OUT_OF_RANGE;
+		if (r1->status & R1_ADDRESS_ERROR)      return MMC_ERROR_ADDRESS;
+		if (r1->status & R1_BLOCK_LEN_ERROR)    return MMC_ERROR_BLOCK_LEN;
+		if (r1->status & R1_ERASE_SEQ_ERROR)    return MMC_ERROR_ERASE_SEQ;
+		if (r1->status & R1_ERASE_PARAM)        return MMC_ERROR_ERASE_PARAM;
+		if (r1->status & R1_WP_VIOLATION)       return MMC_ERROR_WP_VIOLATION;
+		/*if (r1->status & R1_CARD_IS_LOCKED)     return MMC_ERROR_CARD_IS_LOCKED; */
+		if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
+		if (r1->status & R1_COM_CRC_ERROR)      return MMC_ERROR_COM_CRC;
+		if (r1->status & R1_ILLEGAL_COMMAND)    return MMC_ERROR_ILLEGAL_COMMAND;
+		if (r1->status & R1_CARD_ECC_FAILED)    return MMC_ERROR_CARD_ECC_FAILED;
+		if (r1->status & R1_CC_ERROR)           return MMC_ERROR_CC;
+		if (r1->status & R1_ERROR)              return MMC_ERROR_GENERAL;
+		if (r1->status & R1_UNDERRUN)           return MMC_ERROR_UNDERRUN;
+		if (r1->status & R1_OVERRUN)            return MMC_ERROR_OVERRUN;
+		if (r1->status & R1_CID_CSD_OVERWRITE)  return MMC_ERROR_CID_CSD_OVERWRITE;
+	}
+
+	if (buf[0] != request->cmd) 
+		return MMC_ERROR_HEADER_MISMATCH;
+
+	/* This should be last - it's the least dangerous error */
+
+	return 0;
+}
+
+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
+{
+        u8 *buf = request->response;
+	if (request->result)
+		return request->result;
+
+        *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
+        return mmc_unpack_r1(request, r1, state);
+
+}
+
+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
+{
+	u8 *buf = request->response;
+
+	if (request->result)
+		return request->result;
+
+        *rca = PARSE_U16(buf,1);  /* Save RCA returned by the SD Card */
+
+        *(buf+1) = 0;
+        *(buf+2) = 0;
+
+        return mmc_unpack_r1(request, r1, state);
+}
+
+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
+{
+	int i;
+	u8 *buf = request->response;
+
+	if (request->result) 
+		return request->result;
+
+	cid->mid = buf[1];
+	cid->oid = PARSE_U16(buf,2);
+	for (i = 0 ; i < 5 ; i++)
+		cid->pnm[i] = buf[4+i];
+	cid->pnm[6] = 0;
+	cid->prv = buf[10];
+	cid->psn = PARSE_U32(buf,10);
+	cid->mdt = buf[15];
+
+	printf("Man %02x OEM 0x%04x \"%s\" %d.%d 0x%08x "
+	       "Date %02u/%04u\n",
+	       cid->mid,
+	       cid->oid,
+	       cid->pnm, 
+	       cid->prv >> 4,
+	       cid->prv & 0xf, 
+	       cid->psn,
+	       cid->mdt & 0xf,
+	       (cid->mdt >> 4) + 2000);
+
+	if (buf[0] != 0x3f)
+		return MMC_ERROR_HEADER_MISMATCH;
+      	return 0;
+}
+
+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
+{
+	u8 *buf = request->response;
+
+	if (request->result)
+		return request->result;
+
+	r3->ocr = PARSE_U32(buf,1);
+	debug("mmc_unpack_r3: ocr=%08x\n", r3->ocr);
+
+	if (buf[0] != 0x3f)  return MMC_ERROR_HEADER_MISMATCH;
+	return 0;
+}
+
+#define KBPS 1
+#define MBPS 1000
+
+static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
+static u32 ts_mul[] = { 0,    1000, 1200, 1300, 1500, 2000, 2500, 3000, 
+			3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
+
+u32 mmc_tran_speed(u8 ts)
+{
+	u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
+
+	if (rate <= 0) {
+		debug("%s: error - unrecognized speed 0x%02x\n", __func__, ts);
+		return 1;
+	}
+
+	return rate;
+}
+
+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg, 
+		  u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
+{
+	request->cmd       = cmd;
+	request->arg       = arg;
+	request->rtype     = rtype;
+	request->nob       = nob;
+	request->block_len = block_len;
+	request->buffer    = buffer;
+	request->cnt       = nob * block_len;
+
+	jz_mmc_exec_cmd(request);
+}
diff --git a/drivers/mmc/jz_mmc.h b/drivers/mmc/jz_mmc.h
new file mode 100644
index 0000000..936c514
--- /dev/null
+++ b/drivers/mmc/jz_mmc.h
@@ -0,0 +1,176 @@
+/*
+ *  linux/drivers/mmc/jz_mmc.h
+ *
+ *  Author: Vladimir Shebordaev, Igor Oblakov
+ *  Copyright:  MontaVista Software Inc.
+ *
+ *  $Id: jz_mmc.h,v 1.3 2007-06-15 08:04:20 jlwei Exp $
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#ifndef __MMC_JZMMC_H__
+#define __MMC_JZMMC_H__
+
+#define ID_TO_RCA(x) ((x)+1)
+#define MMC_OCR_ARG		0x00ff8000	/* Argument of OCR */
+
+/* Standard MMC/SD clock speeds */
+#define MMC_CLOCK_SLOW    400000      /* 400 kHz for initial setup */
+#define MMC_CLOCK_FAST  20000000      /* 20 MHz for maximum for normal operation */
+#define SD_CLOCK_FAST   24000000      /* 24 MHz for SD Cards */
+
+/* Use negative numbers to disambiguate */
+#define MMC_CIM_RESET            -1
+#define SET_BUS_WIDTH            6    /* ac   [1:0] bus width    R1  */    
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1b */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+
+enum mmc_result_t {
+	MMC_NO_RESPONSE        = -1,
+	MMC_NO_ERROR           = 0,
+	MMC_ERROR_OUT_OF_RANGE,
+	MMC_ERROR_ADDRESS,
+	MMC_ERROR_BLOCK_LEN,
+	MMC_ERROR_ERASE_SEQ,
+	MMC_ERROR_ERASE_PARAM,
+	MMC_ERROR_WP_VIOLATION,
+	MMC_ERROR_CARD_IS_LOCKED,
+	MMC_ERROR_LOCK_UNLOCK_FAILED,
+	MMC_ERROR_COM_CRC,
+	MMC_ERROR_ILLEGAL_COMMAND,
+	MMC_ERROR_CARD_ECC_FAILED,
+	MMC_ERROR_CC,
+	MMC_ERROR_GENERAL,
+	MMC_ERROR_UNDERRUN,
+	MMC_ERROR_OVERRUN,
+	MMC_ERROR_CID_CSD_OVERWRITE,
+	MMC_ERROR_STATE_MISMATCH,
+	MMC_ERROR_HEADER_MISMATCH,
+	MMC_ERROR_TIMEOUT,
+	MMC_ERROR_CRC,
+	MMC_ERROR_DRIVER_FAILURE,
+};
+
+enum card_state {
+	CARD_STATE_EMPTY = -1,
+	CARD_STATE_IDLE	 = 0,
+	CARD_STATE_READY = 1,
+	CARD_STATE_IDENT = 2,
+	CARD_STATE_STBY	 = 3,
+	CARD_STATE_TRAN	 = 4,
+	CARD_STATE_DATA	 = 5,
+	CARD_STATE_RCV	 = 6,
+	CARD_STATE_PRG	 = 7,
+	CARD_STATE_DIS	 = 8,
+};
+
+enum mmc_rsp_t {
+	RESPONSE_NONE   = 0,
+	RESPONSE_R1     = 1,
+	RESPONSE_R1B    = 2,
+	RESPONSE_R2_CID = 3,
+	RESPONSE_R2_CSD  = 4,
+	RESPONSE_R3      = 5,
+	RESPONSE_R4      = 6,
+	RESPONSE_R5      = 7,
+        RESPONSE_R6      = 8,
+};
+
+struct mmc_response_r1 {
+	u8  cmd;
+	u32 status;
+};
+
+struct mmc_response_r3 {  
+	u32 ocr;
+}; 
+
+/* the information structure of MMC/SD Card */
+struct  mmc_info {
+	int             id;     /* Card index */
+        int             sd;     /* MMC or SD card */
+        int             rca;    /* RCA */
+        u32             scr;    /* SCR 63:32*/
+	int             flags;  /* Ejected, inserted */
+	enum card_state state;  /* empty, ident, ready, whatever */
+
+	/* Card specific information */
+	struct mmc_cid  cid;
+	struct mmc_csd  csd;
+	u32             block_num;
+	u32             block_len;
+	u32             erase_unit;
+};
+
+struct mmc_info mmcinfo;
+
+struct mmc_request {
+	int               index;      /* Slot index - used for CS lines */
+	int               cmd;        /* Command to send */
+	u32               arg;        /* Argument to send */
+	enum mmc_rsp_t    rtype;      /* Response type expected */
+
+	/* Data transfer (these may be modified at the low level) */
+	u16               nob;        /* Number of blocks to transfer*/
+	u16               block_len;  /* Block length */
+	u8               *buffer;     /* Data buffer */
+	u32               cnt;        /* Data length, for PIO */
+
+	/* Results */
+	u8                response[18]; /* Buffer to store response - CRC is optional */
+	enum mmc_result_t result;
+};
+
+char * mmc_result_to_string(int);
+int    mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd);
+int    mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state);
+int    mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca);
+int    mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr);
+int    mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid);
+int    mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3);
+
+void   mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg, 
+		     u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer);
+u32    mmc_tran_speed(u8 ts);
+void   jz_mmc_set_clock(int sd, u32 rate);
+
+static inline void mmc_simple_cmd(struct mmc_request *request, int cmd, u32 arg, enum mmc_rsp_t rtype)
+{
+	mmc_send_cmd( request, cmd, arg, 0, 0, rtype, 0);
+}
+
+#endif /* __MMC_JZMMC_H__ */
diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
index 7bff444..7b33be0 100644
--- a/include/configs/qi_lb60.h
+++ b/include/configs/qi_lb60.h
@@ -31,6 +31,15 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_JZ4740_MMC
+#define CONFIG_MMC      	1
+#define CONFIG_FAT      	1
+#define CONFIG_DOS_PARTITION	1
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+
 #define CONFIG_SYS_SDRAM_BASE		0x80000000	/* Cached addr */
 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 #define CONFIG_SYS_LOAD_ADDR		0x80600000
diff --git a/include/mmc.h b/include/mmc.h
index a13e2bd..3c4761c 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -283,4 +283,44 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
 int mmc_legacy_init(int verbose);
 #endif
 
+struct mmc_csd
+{
+	u8	csd_structure:2,
+		spec_vers:4,
+		rsvd1:2;
+	u8	taac;
+	u8	nsac;
+	u8	tran_speed;
+	u16	ccc:12,
+		read_bl_len:4;
+	u32	c_size:22;
+	u64	read_bl_partial:1,
+		write_blk_misalign:1,
+		read_blk_misalign:1,
+		dsr_imp:1,
+		rsvd2:2,
+		vdd_r_curr_min:3,
+		vdd_r_curr_max:3,
+		vdd_w_curr_min:3,
+		vdd_w_curr_max:3,
+		c_size_mult:3,
+		sector_size:5,
+		erase_grp_size:5,
+		wp_grp_size:5,
+		wp_grp_enable:1,
+		default_ecc:2,
+		r2w_factor:3,
+		write_bl_len:4,
+		write_bl_partial:1,
+		rsvd3:5;
+	u8	file_format_grp:1,
+		copy:1,
+		perm_write_protect:1,
+		tmp_write_protect:1,
+		file_format:2,
+		ecc:2;
+	u8	crc:7;
+	u8	one:1;
+};
+
 #endif /* _MMC_H_ */
-- 
1.7.9.5