123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830 |
- menu "Linux System Utilities"
- config BUSYBOX_CONFIG_BLKDISCARD
- bool "blkdiscard"
- default BUSYBOX_DEFAULT_BLKDISCARD
- help
- blkdiscard discards sectors on a given device.
- config BUSYBOX_CONFIG_BLOCKDEV
- bool "blockdev"
- default BUSYBOX_DEFAULT_BLOCKDEV
- help
- Performs some ioctls with block devices.
- config BUSYBOX_CONFIG_FATATTR
- bool "fatattr"
- default BUSYBOX_DEFAULT_FATATTR
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- fatattr lists or changes the file attributes on a fat file system.
- config BUSYBOX_CONFIG_FSTRIM
- bool "fstrim"
- default BUSYBOX_DEFAULT_FSTRIM
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Discard unused blocks on a mounted filesystem.
- config BUSYBOX_CONFIG_MDEV
- bool "mdev"
- default BUSYBOX_DEFAULT_MDEV
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- mdev is a mini-udev implementation for dynamically creating device
- nodes in the /dev directory.
- For more information, please see docs/mdev.txt
- config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
- bool "Support /etc/mdev.conf"
- default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
- depends on BUSYBOX_CONFIG_MDEV
- help
- Add support for the mdev config file to control ownership and
- permissions of the device nodes.
- For more information, please see docs/mdev.txt
- config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
- bool "Support subdirs/symlinks"
- default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
- depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
- help
- Add support for renaming devices and creating symlinks.
- For more information, please see docs/mdev.txt
- config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
- bool "Support regular expressions substitutions when renaming device"
- default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
- depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
- help
- Add support for regular expressions substitutions when renaming
- device.
- config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
- bool "Support command execution at device addition/removal"
- default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
- depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
- help
- This adds support for an optional field to /etc/mdev.conf for
- executing commands when devices are created/removed.
- For more information, please see docs/mdev.txt
- config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
- bool "Support loading of firmwares"
- default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
- depends on BUSYBOX_CONFIG_MDEV
- help
- Some devices need to load firmware before they can be usable.
- These devices will request userspace look up the files in
- /lib/firmware/ and if it exists, send it to the kernel for
- loading into the hardware.
- config BUSYBOX_CONFIG_MOUNT
- bool "mount"
- default BUSYBOX_DEFAULT_MOUNT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- All files and filesystems in Unix are arranged into one big directory
- tree. The 'mount' utility is used to graft a filesystem onto a
- particular part of the tree. A filesystem can either live on a block
- device, or it can be accessible over the network, as is the case with
- NFS filesystems. Most people using BusyBox will also want to enable
- the 'mount' utility.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
- bool "Support option -f"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
- depends on BUSYBOX_CONFIG_MOUNT
- help
- Enable support for faking a file system mount.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
- bool "Support option -v"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
- depends on BUSYBOX_CONFIG_MOUNT
- help
- Enable multi-level -v[vv...] verbose messages. Useful if you
- debug mount problems and want to see what is exactly passed
- to the kernel.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
- bool "Support mount helpers"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
- depends on BUSYBOX_CONFIG_MOUNT
- help
- Enable mounting of virtual file systems via external helpers.
- E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
- "obexfs -b00.11.22.33.44.55 /mnt"
- Also "mount -t sometype [-o opts] fs /mnt" will try
- "sometype [-o opts] fs /mnt" if simple mount syscall fails.
- The idea is to use such virtual filesystems in /etc/fstab.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
- bool "Support specifying devices by label or UUID"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
- depends on BUSYBOX_CONFIG_MOUNT
- select BUSYBOX_CONFIG_VOLUMEID
- help
- This allows for specifying a device by label or uuid, rather than by
- name. This feature utilizes the same functionality as blkid/findfs.
- This also enables label or uuid support for swapon.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
- bool "Support mounting NFS file systems on Linux < 2.6.23"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
- depends on BUSYBOX_CONFIG_MOUNT
- select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- Enable mounting of NFS file systems on Linux kernels prior
- to version 2.6.23. Note that in this case mounting of NFS
- over IPv6 will not be possible.
- Note that this option links in RPC support from libc,
- which is rather large (~10 kbytes on uclibc).
- config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
- bool "Support mounting CIFS/SMB file systems"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
- depends on BUSYBOX_CONFIG_MOUNT
- help
- Enable support for samba mounts.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
- depends on BUSYBOX_CONFIG_MOUNT
- bool "Support lots of -o flags in mount"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
- help
- Without this, mount only supports ro/rw/remount. With this, it
- supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
- noatime, diratime, nodiratime, loud, bind, move, shared, slave,
- private, unbindable, rshared, rslave, rprivate, and runbindable.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
- depends on BUSYBOX_CONFIG_MOUNT
- bool "Support /etc/fstab and -a"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
- help
- Support mount all and looking for files in /etc/fstab.
- config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
- depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
- bool "Support -T <alt_fstab>"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
- help
- Support mount -T (specifying an alternate fstab)
- config BUSYBOX_CONFIG_NSENTER
- bool "nsenter"
- default BUSYBOX_DEFAULT_NSENTER
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Run program with namespaces of other processes.
- config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
- depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the nsenter applet. This makes
- the busybox implementation more compatible with upstream.
- config BUSYBOX_CONFIG_REV
- bool "rev"
- default BUSYBOX_DEFAULT_REV
- help
- Reverse lines of a file or files.
- config BUSYBOX_CONFIG_SETARCH
- bool "setarch"
- default BUSYBOX_DEFAULT_SETARCH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The linux32 utility is used to create a 32bit environment for the
- specified program (usually a shell). It only makes sense to have
- this util on a system that supports both 64bit and 32bit userland
- (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
- config BUSYBOX_CONFIG_UEVENT
- bool "uevent"
- default BUSYBOX_DEFAULT_UEVENT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- uevent is a netlink listener for kernel uevent notifications
- sent via netlink. It is usually used for dynamic device creation.
- config BUSYBOX_CONFIG_UNSHARE
- bool "unshare"
- default BUSYBOX_DEFAULT_UNSHARE
- depends on BUSYBOX_CONFIG_LONG_OPTS && !BUSYBOX_CONFIG_NOMMU
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Run program with some namespaces unshared from parent.
- config BUSYBOX_CONFIG_ACPID
- bool "acpid"
- default BUSYBOX_DEFAULT_ACPID
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- acpid listens to ACPI events coming either in textual form from
- /proc/acpi/event (though it is marked deprecated it is still widely
- used and _is_ a standard) or in binary form from specified evdevs
- (just use /dev/input/event*).
- It parses the event to retrieve ACTION and a possible PARAMETER.
- It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
- (if the resulting path is a directory) or directly as an executable.
- N.B. acpid relies on run-parts so have the latter installed.
- config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
- bool "Accept and ignore redundant options"
- default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
- depends on BUSYBOX_CONFIG_ACPID
- help
- Accept and ignore compatibility options -g -m -s -S -v.
- config BUSYBOX_CONFIG_BLKID
- bool "blkid"
- default BUSYBOX_DEFAULT_BLKID
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- select BUSYBOX_CONFIG_VOLUMEID
- help
- Lists labels and UUIDs of all filesystems.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
- config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
- bool "Print filesystem type"
- default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
- depends on BUSYBOX_CONFIG_BLKID
- help
- Show TYPE="filesystem type"
- config BUSYBOX_CONFIG_DMESG
- bool "dmesg"
- default BUSYBOX_DEFAULT_DMESG
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- dmesg is used to examine or control the kernel ring buffer. When the
- Linux kernel prints messages to the system log, they are stored in
- the kernel ring buffer. You can use dmesg to print the kernel's ring
- buffer, clear the kernel ring buffer, change the size of the kernel
- ring buffer, and change the priority level at which kernel messages
- are also logged to the system console. Enable this option if you
- wish to enable the 'dmesg' utility.
- config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
- bool "Pretty dmesg output"
- default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
- depends on BUSYBOX_CONFIG_DMESG
- help
- If you wish to scrub the syslog level from the output, say 'Y' here.
- The syslog level is a string prefixed to every line with the form
- "<#>".
- With this option you will see:
- # dmesg
- Linux version 2.6.17.4 .....
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- Without this option you will see:
- # dmesg
- <5>Linux version 2.6.17.4 .....
- <6>BIOS-provided physical RAM map:
- <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- config BUSYBOX_CONFIG_FBSET
- bool "fbset"
- default BUSYBOX_DEFAULT_FBSET
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- fbset is used to show or change the settings of a Linux frame buffer
- device. The frame buffer device provides a simple and unique
- interface to access a graphics display. Enable this option
- if you wish to enable the 'fbset' utility.
- config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
- bool "Turn on extra fbset options"
- default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
- depends on BUSYBOX_CONFIG_FBSET
- help
- This option enables extended fbset options, allowing one to set the
- framebuffer size, color depth, etc. interface to access a graphics
- display. Enable this option if you wish to enable extended fbset
- options.
- config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
- bool "Turn on fbset readmode support"
- default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
- depends on BUSYBOX_CONFIG_FBSET
- help
- This option allows fbset to read the video mode database stored by
- default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
- device to pre-defined video modes.
- config BUSYBOX_CONFIG_FDFLUSH
- bool "fdflush"
- default BUSYBOX_DEFAULT_FDFLUSH
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- fdflush is only needed when changing media on slightly-broken
- removable media drives. It is used to make Linux believe that a
- hardware disk-change switch has been actuated, which causes Linux to
- forget anything it has cached from the previous media. If you have
- such a slightly-broken drive, you will need to run fdflush every time
- you change a disk. Most people have working hardware and can safely
- leave this disabled.
- config BUSYBOX_CONFIG_FDFORMAT
- bool "fdformat"
- default BUSYBOX_DEFAULT_FDFORMAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- fdformat is used to low-level format a floppy disk.
- config BUSYBOX_CONFIG_FDISK
- bool "fdisk"
- default BUSYBOX_DEFAULT_FDISK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The fdisk utility is used to divide hard disks into one or more
- logical disks, which are generally called partitions. This utility
- can be used to list and edit the set of partitions or BSD style
- 'disk slices' that are defined on a hard drive.
- config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
- bool "Support over 4GB disks"
- default BUSYBOX_DEFAULT_FDISK_SUPPORT_LARGE_DISKS
- depends on BUSYBOX_CONFIG_FDISK
- depends on !BUSYBOX_CONFIG_LFS # with LFS no special code is needed
- help
- Enable this option to support large disks > 4GB.
- config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- bool "Write support"
- default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
- depends on BUSYBOX_CONFIG_FDISK
- help
- Enabling this option allows you to create or change a partition table
- and write those changes out to disk. If you leave this option
- disabled, you will only be able to view the partition table.
- config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
- bool "Support AIX disklabels"
- default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to create or change AIX disklabels.
- Most people can safely leave this option disabled.
- config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
- bool "Support SGI disklabels"
- default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to create or change SGI disklabels.
- Most people can safely leave this option disabled.
- config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
- bool "Support SUN disklabels"
- default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to create or change SUN disklabels.
- Most people can safely leave this option disabled.
- config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
- bool "Support BSD disklabels"
- default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to create or change BSD disklabels
- and define and edit BSD disk slices.
- config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
- bool "Support GPT disklabels"
- default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to view GUID Partition Table
- disklabels.
- config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
- bool "Support expert mode"
- default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- help
- Enabling this option allows you to do terribly unsafe things like
- define arbitrary drive geometry, move the beginning of data in a
- partition, and similarly evil things. Unless you have a very good
- reason you would be wise to leave this disabled.
- config BUSYBOX_CONFIG_FINDFS
- bool "findfs"
- default BUSYBOX_DEFAULT_FINDFS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- select BUSYBOX_CONFIG_VOLUMEID
- help
- Prints the name of a filesystem with given label or UUID.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
- config BUSYBOX_CONFIG_FLOCK
- bool "flock"
- default BUSYBOX_DEFAULT_FLOCK
- help
- Manage locks from shell scripts
- config BUSYBOX_CONFIG_FREERAMDISK
- bool "freeramdisk"
- default BUSYBOX_DEFAULT_FREERAMDISK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Linux allows you to create ramdisks. This utility allows you to
- delete them and completely free all memory that was used for the
- ramdisk. For example, if you boot Linux into a ramdisk and later
- pivot_root, you may want to free the memory that is allocated to the
- ramdisk. If you have no use for freeing memory from a ramdisk, leave
- this disabled.
- config BUSYBOX_CONFIG_FSCK_MINIX
- bool "fsck_minix"
- default BUSYBOX_DEFAULT_FSCK_MINIX
- help
- The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. It is not a journaling filesystem however and
- can experience corruption if it is not properly unmounted or if the
- power goes off in the middle of a write. This utility allows you to
- check for and attempt to repair any corruption that occurs to a minix
- filesystem.
- config BUSYBOX_CONFIG_MKFS_EXT2
- bool "mkfs_ext2"
- default BUSYBOX_DEFAULT_MKFS_EXT2
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Utility to create EXT2 filesystems.
- config BUSYBOX_CONFIG_MKFS_MINIX
- bool "mkfs_minix"
- default BUSYBOX_DEFAULT_MKFS_MINIX
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. If you wish to be able to create minix
- filesystems this utility will do the job for you.
- config BUSYBOX_CONFIG_FEATURE_MINIX2
- bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
- default BUSYBOX_DEFAULT_FEATURE_MINIX2
- depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
- help
- If you wish to be able to create version 2 minix filesystems, enable
- this. If you enabled 'mkfs_minix' then you almost certainly want to
- be using the version 2 filesystem support.
- config BUSYBOX_CONFIG_MKFS_REISER
- bool "mkfs_reiser"
- default BUSYBOX_DEFAULT_MKFS_REISER
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Utility to create ReiserFS filesystems.
- Note: this applet needs a lot of testing and polishing.
- config BUSYBOX_CONFIG_MKFS_VFAT
- bool "mkfs_vfat"
- default BUSYBOX_DEFAULT_MKFS_VFAT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Utility to create FAT32 filesystems.
- config BUSYBOX_CONFIG_GETOPT
- bool "getopt"
- default BUSYBOX_DEFAULT_GETOPT
- help
- The getopt utility is used to break up (parse) options in command
- lines to make it easy to write complex shell scripts that also check
- for legal (and illegal) options. If you want to write horribly
- complex shell scripts, or use some horribly complex shell script
- written by others, this utility may be for you. Most people will
- wisely leave this disabled.
- config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
- bool "Support option -l"
- default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
- depends on BUSYBOX_CONFIG_GETOPT
- help
- Enable support for long options (option -l).
- config BUSYBOX_CONFIG_HEXDUMP
- bool "hexdump"
- default BUSYBOX_DEFAULT_HEXDUMP
- help
- The hexdump utility is used to display binary data in a readable
- way that is comparable to the output from most hex editors.
- config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
- bool "Support -R, reverse of 'hexdump -Cv'"
- default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
- depends on BUSYBOX_CONFIG_HEXDUMP
- help
- The hexdump utility is used to display binary data in an ascii
- readable way. This option creates binary data from an ascii input.
- NB: this option is non-standard. It's unwise to use it in scripts
- aimed to be portable.
- config BUSYBOX_CONFIG_HD
- bool "hd"
- default BUSYBOX_DEFAULT_HD
- depends on BUSYBOX_CONFIG_HEXDUMP
- help
- hd is an alias to hexdump -C.
- config BUSYBOX_CONFIG_HWCLOCK
- bool "hwclock"
- default BUSYBOX_DEFAULT_HWCLOCK
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The hwclock utility is used to read and set the hardware clock
- on a system. This is primarily used to set the current time on
- shutdown in the hardware clock, so the hardware will keep the
- correct time when Linux is _not_ running.
- config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
- bool "Support long options (--hctosys,...)"
- default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
- help
- By default, the hwclock utility only uses short options. If you
- are overly fond of its long options, such as --hctosys, --utc, etc)
- then enable this option.
- config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
- bool "Use FHS /var/lib/hwclock/adjtime"
- default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS # util-linux-ng in Fedora 13 still uses /etc/adjtime
- depends on BUSYBOX_CONFIG_HWCLOCK
- help
- Starting with FHS 2.3, the adjtime state file is supposed to exist
- at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
- to use the FHS behavior, answer Y here, otherwise answer N for the
- classic /etc/adjtime path.
- pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
- config BUSYBOX_CONFIG_IPCRM
- bool "ipcrm"
- default BUSYBOX_DEFAULT_IPCRM
- help
- The ipcrm utility allows the removal of System V interprocess
- communication (IPC) objects and the associated data structures
- from the system.
- config BUSYBOX_CONFIG_IPCS
- bool "ipcs"
- default BUSYBOX_DEFAULT_IPCS
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The ipcs utility is used to provide information on the currently
- allocated System V interprocess (IPC) objects in the system.
- config BUSYBOX_CONFIG_LOSETUP
- bool "losetup"
- default BUSYBOX_DEFAULT_LOSETUP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- losetup is used to associate or detach a loop device with a regular
- file or block device, and to query the status of a loop device. This
- version does not currently support enabling data encryption.
- config BUSYBOX_CONFIG_LSPCI
- bool "lspci"
- default BUSYBOX_DEFAULT_LSPCI
- #select PLATFORM_LINUX
- help
- lspci is a utility for displaying information about PCI buses in the
- system and devices connected to them.
- This version uses sysfs (/sys/bus/pci/devices) only.
- config BUSYBOX_CONFIG_LSUSB
- bool "lsusb"
- default BUSYBOX_DEFAULT_LSUSB
- #select PLATFORM_LINUX
- help
- lsusb is a utility for displaying information about USB buses in the
- system and devices connected to them.
- This version uses sysfs (/sys/bus/usb/devices) only.
- config BUSYBOX_CONFIG_MKSWAP
- bool "mkswap"
- default BUSYBOX_DEFAULT_MKSWAP
- help
- The mkswap utility is used to configure a file or disk partition as
- Linux swap space. This allows Linux to use the entire file or
- partition as if it were additional RAM, which can greatly increase
- the capability of low-memory machines. This additional memory is
- much slower than real RAM, but can be very helpful at preventing your
- applications being killed by the Linux out of memory (OOM) killer.
- Once you have created swap space using 'mkswap' you need to enable
- the swap space using the 'swapon' utility.
- config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
- bool "UUID support"
- default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
- depends on BUSYBOX_CONFIG_MKSWAP
- help
- Generate swap spaces with universally unique identifiers.
- config BUSYBOX_CONFIG_MORE
- bool "more"
- default BUSYBOX_DEFAULT_MORE
- help
- more is a simple utility which allows you to read text one screen
- sized page at a time. If you want to read text that is larger than
- the screen, and you are using anything faster than a 300 baud modem,
- you will probably find this utility very helpful. If you don't have
- any need to reading text files, you can leave this disabled.
- config BUSYBOX_CONFIG_PIVOT_ROOT
- bool "pivot_root"
- default BUSYBOX_DEFAULT_PIVOT_ROOT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The pivot_root utility swaps the mount points for the root filesystem
- with some other mounted filesystem. This allows you to do all sorts
- of wild and crazy things with your Linux system and is far more
- powerful than 'chroot'.
- Note: This is for initrd in linux 2.4. Under initramfs (introduced
- in linux 2.6) use switch_root instead.
- config BUSYBOX_CONFIG_RDATE
- bool "rdate"
- default BUSYBOX_DEFAULT_RDATE
- help
- The rdate utility allows you to synchronize the date and time of your
- system clock with the date and time of a remote networked system using
- the RFC868 protocol, which is built into the inetd daemon on most
- systems.
- config BUSYBOX_CONFIG_RDEV
- bool "rdev"
- default BUSYBOX_DEFAULT_RDEV
- help
- Print the device node associated with the filesystem mounted at '/'.
- config BUSYBOX_CONFIG_READPROFILE
- bool "readprofile"
- default BUSYBOX_DEFAULT_READPROFILE
- #select PLATFORM_LINUX
- help
- This allows you to parse /proc/profile for basic profiling.
- config BUSYBOX_CONFIG_RTCWAKE
- bool "rtcwake"
- default BUSYBOX_DEFAULT_RTCWAKE
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Enter a system sleep state until specified wakeup time.
- config BUSYBOX_CONFIG_SCRIPT
- bool "script"
- default BUSYBOX_DEFAULT_SCRIPT
- help
- The script makes typescript of terminal session.
- config BUSYBOX_CONFIG_SCRIPTREPLAY
- bool "scriptreplay"
- default BUSYBOX_DEFAULT_SCRIPTREPLAY
- help
- This program replays a typescript, using timing information
- given by script -t.
- config BUSYBOX_CONFIG_SWAPONOFF
- bool "swaponoff"
- default BUSYBOX_DEFAULT_SWAPONOFF
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- This option enables both the 'swapon' and the 'swapoff' utilities.
- Once you have created some swap space using 'mkswap', you also need
- to enable your swap space with the 'swapon' utility. The 'swapoff'
- utility is used, typically at system shutdown, to disable any swap
- space. If you are not using any swap space, you can leave this
- option disabled.
- config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
- bool "Support discard option -d"
- default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
- depends on BUSYBOX_CONFIG_SWAPONOFF
- help
- Enable support for discarding swap area blocks at swapon and/or as
- the kernel frees them. This option enables both the -d option on
- 'swapon' and the 'discard' option for swap entries in /etc/fstab.
- config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
- bool "Support priority option -p"
- default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
- depends on BUSYBOX_CONFIG_SWAPONOFF
- help
- Enable support for setting swap device priority in swapon.
- config BUSYBOX_CONFIG_SWITCH_ROOT
- bool "switch_root"
- default BUSYBOX_DEFAULT_SWITCH_ROOT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The switch_root utility is used from initramfs to select a new
- root device. Under initramfs, you have to use this instead of
- pivot_root. (Stop reading here if you don't care why.)
- Booting with initramfs extracts a gzipped cpio archive into rootfs
- (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
- or unmounted*, pivot_root will not work from initramfs. Instead,
- switch_root deletes everything out of rootfs (including itself),
- does a mount --move that overmounts rootfs with the new root, and
- then execs the specified init program.
- * Because the Linux kernel uses rootfs internally as the starting
- and ending point for searching through the kernel's doubly linked
- list of active mount points. That's why.
- config BUSYBOX_CONFIG_UMOUNT
- bool "umount"
- default BUSYBOX_DEFAULT_UMOUNT
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- When you want to remove a mounted filesystem from its current mount
- point, for example when you are shutting down the system, the
- 'umount' utility is the tool to use. If you enabled the 'mount'
- utility, you almost certainly also want to enable 'umount'.
- config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
- bool "Support option -a"
- default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
- depends on BUSYBOX_CONFIG_UMOUNT
- help
- Support -a option to unmount all currently mounted filesystems.
- comment "Common options for mount/umount"
- depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
- config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
- bool "Support loopback mounts"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP
- depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
- help
- Enabling this feature allows automatic mounting of files (containing
- filesystem images) via the linux kernel's loopback devices.
- The mount command will detect you are trying to mount a file instead
- of a block device, and transparently associate the file with a
- loopback device. The umount command will also free that loopback
- device.
- You can still use the 'losetup' utility (to manually associate files
- with loop devices) if you need to do something advanced, such as
- specify an offset or cryptographic options to the loopback device.
- (If you don't want umount to free the loop device, use "umount -D".)
- config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
- bool "Create new loopback devices if needed"
- default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE
- depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
- help
- Linux kernels >= 2.6.24 support unlimited loopback devices. They are
- allocated for use when trying to use a loop device. The loop device
- must however exist.
- This feature lets mount to try to create next /dev/loopN device
- if it does not find a free one.
- config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
- bool "Support for the old /etc/mtab file"
- default BUSYBOX_DEFAULT_FEATURE_MTAB_SUPPORT
- depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
- select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
- help
- Historically, Unix systems kept track of the currently mounted
- partitions in the file "/etc/mtab". These days, the kernel exports
- the list of currently mounted partitions in "/proc/mounts", rendering
- the old mtab file obsolete. (In modern systems, /etc/mtab should be
- a symlink to /proc/mounts.)
- The only reason to have mount maintain an /etc/mtab file itself is if
- your stripped-down embedded system does not have a /proc directory.
- If you must use this, keep in mind it's inherently brittle (for
- example a mount under chroot won't update it), can't handle modern
- features like separate per-process filesystem namespaces, requires
- that your /etc directory be writable, tends to get easily confused
- by --bind or --move mounts, won't update if you rename a directory
- that contains a mount point, and so on. (In brief: avoid.)
- About the only reason to use this is if you've removed /proc from
- your kernel.
- source volume_id/Config.in
- endmenu
|