GnuBee-libreCMC/package/kernel/linux/modules/other.mk

#
# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

OTHER_MENU:=Other modules

WATCHDOG_DIR:=watchdog


define KernelPackage/6lowpan
  SUBMENU:=$(OTHER_MENU)
  TITLE:=6LoWPAN shared code
  KCONFIG:= \
	CONFIG_6LOWPAN \
	CONFIG_6LOWPAN_NHC=n
  FILES:=$(LINUX_DIR)/net/6lowpan/6lowpan.ko
  AUTOLOAD:=$(call AutoProbe,6lowpan)
endef

define KernelPackage/6lowpan/description
  Shared 6lowpan code for IEEE 802.15.4 and Bluetooth.
endef

$(eval $(call KernelPackage,6lowpan))


define KernelPackage/bluetooth
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Bluetooth support
  DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +LINUX_4_4:kmod-regmap
  KCONFIG:= \
	CONFIG_BLUEZ \
	CONFIG_BLUEZ_L2CAP \
	CONFIG_BLUEZ_SCO \
	CONFIG_BLUEZ_RFCOMM \
	CONFIG_BLUEZ_BNEP \
	CONFIG_BLUEZ_HCIUART \
	CONFIG_BLUEZ_HCIUSB \
	CONFIG_BLUEZ_HIDP \
	CONFIG_BT \
	CONFIG_BT_BREDR=y \
	CONFIG_BT_DEBUGFS=n \
	CONFIG_BT_L2CAP=y \
	CONFIG_BT_LE=y \
	CONFIG_BT_SCO=y \
	CONFIG_BT_RFCOMM \
	CONFIG_BT_BNEP \
	CONFIG_BT_HCIBTUSB \
	CONFIG_BT_HCIBTUSB_BCM=n \
	CONFIG_BT_HCIUSB \
	CONFIG_BT_HCIUART \
	CONFIG_BT_HCIUART_BCM=n \
	CONFIG_BT_HCIUART_INTEL=n \
	CONFIG_BT_HCIUART_H4 \
	CONFIG_BT_HIDP \
	CONFIG_HID_SUPPORT=y
  $(call AddDepends/rfkill)
  FILES:= \
	$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
	$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
	$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
	$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
	$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
	$(LINUX_DIR)/drivers/bluetooth/btusb.ko
ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
  FILES+= \
	$(LINUX_DIR)/drivers/bluetooth/btintel.ko
endif
  AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef

define KernelPackage/bluetooth/description
 Kernel support for Bluetooth devices
endef

$(eval $(call KernelPackage,bluetooth))

define KernelPackage/ath3k
  SUBMENU:=$(OTHER_MENU)
  TITLE:=ATH3K Kernel Module support
  DEPENDS:=+kmod-bluetooth +ar3k-firmware
  KCONFIG:= \
	CONFIG_BT_ATH3K \
	CONFIG_BT_HCIUART_ATH3K=y
  $(call AddDepends/bluetooth)
  FILES:= \
	$(LINUX_DIR)/drivers/bluetooth/ath3k.ko
  AUTOLOAD:=$(call AutoProbe,ath3k)
endef

define KernelPackage/ath3k/description
 Kernel support for ATH3K Module
endef

$(eval $(call KernelPackage,ath3k))


define KernelPackage/bluetooth_6lowpan
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Bluetooth 6LoWPAN support
  DEPENDS:=+kmod-6lowpan +kmod-bluetooth
  KCONFIG:=CONFIG_BT_6LOWPAN
  FILES:=$(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko
  AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef

define KernelPackage/bluetooth_6lowpan/description
 Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef

$(eval $(call KernelPackage,bluetooth_6lowpan))


define KernelPackage/dma-buf
  SUBMENU:=$(OTHER_MENU)
  TITLE:=DMA shared buffer support
  HIDDEN:=1
  KCONFIG:=CONFIG_DMA_SHARED_BUFFER
  FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
  AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
endef
$(eval $(call KernelPackage,dma-buf))


define KernelPackage/eeprom-93cx6
  SUBMENU:=$(OTHER_MENU)
  TITLE:=EEPROM 93CX6 support
  KCONFIG:=CONFIG_EEPROM_93CX6
  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
  AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef

define KernelPackage/eeprom-93cx6/description
 Kernel module for EEPROM 93CX6 support
endef

$(eval $(call KernelPackage,eeprom-93cx6))


define KernelPackage/eeprom-at24
  SUBMENU:=$(OTHER_MENU)
  TITLE:=EEPROM AT24 support
  KCONFIG:=CONFIG_EEPROM_AT24
  DEPENDS:=+kmod-i2c-core
  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
  AUTOLOAD:=$(call AutoProbe,at24)
endef

define KernelPackage/eeprom-at24/description
 Kernel module for most I2C EEPROMs
endef

$(eval $(call KernelPackage,eeprom-at24))


define KernelPackage/eeprom-at25
  SUBMENU:=$(OTHER_MENU)
  TITLE:=EEPROM AT25 support
  KCONFIG:=CONFIG_EEPROM_AT25
  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
  AUTOLOAD:=$(call AutoProbe,at25)
endef

define KernelPackage/eeprom-at25/description
 Kernel module for most SPI EEPROMs
endef

$(eval $(call KernelPackage,eeprom-at25))


define KernelPackage/gpio-dev
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Generic GPIO char device support
  DEPENDS:=@GPIO_SUPPORT
  KCONFIG:=CONFIG_GPIO_DEVICE
  FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
  AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
endef

define KernelPackage/gpio-dev/description
 Kernel module to allows control of GPIO pins using a character device.
endef

$(eval $(call KernelPackage,gpio-dev))


define KernelPackage/gpio-mcp23s08
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Microchip MCP23xxx I/O expander
  DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
  KCONFIG:=CONFIG_GPIO_MCP23S08
  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
  AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
endef

define KernelPackage/gpio-mcp23s08/description
 Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
endef

$(eval $(call KernelPackage,gpio-mcp23s08))


define KernelPackage/gpio-nxp-74hc164
  SUBMENU:=$(OTHER_MENU)
  TITLE:=NXP 74HC164 GPIO expander support
  KCONFIG:=CONFIG_GPIO_NXP_74HC164
  FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
  AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
endef

define KernelPackage/gpio-nxp-74hc164/description
 Kernel module for NXP 74HC164 GPIO expander
endef

$(eval $(call KernelPackage,gpio-nxp-74hc164))

define KernelPackage/gpio-pca953x
  SUBMENU:=$(OTHER_MENU)
  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
  TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
  KCONFIG:=CONFIG_GPIO_PCA953X
  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
  AUTOLOAD:=$(call AutoLoad,55,gpio-pca953x)
endef

define KernelPackage/gpio-pca953x/description
 Kernel module for MAX731{0,2,3,5}, PCA6107, PCA953{4-9}, PCA955{4-7},
 PCA957{4,5} and TCA64{08,16} I2C GPIO expanders
endef

$(eval $(call KernelPackage,gpio-pca953x))

define KernelPackage/gpio-pcf857x
  SUBMENU:=$(OTHER_MENU)
  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
  TITLE:=PCX857x, PCA967x and MAX732X I2C GPIO expanders
  KCONFIG:=CONFIG_GPIO_PCF857X
  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pcf857x.ko
  AUTOLOAD:=$(call AutoLoad,55,gpio-pcf857x)
endef

define KernelPackage/gpio-pcf857x/description
 Kernel module for PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders
endef

$(eval $(call KernelPackage,gpio-pcf857x))

define KernelPackage/iio-core
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Industrial IO core
  KCONFIG:= \
	CONFIG_IIO \
	CONFIG_IIO_BUFFER=y \
	CONFIG_IIO_KFIFO_BUF \
	CONFIG_IIO_TRIGGER=y \
	CONFIG_IIO_TRIGGERED_BUFFER
  FILES:= \
	$(LINUX_DIR)/drivers/iio/industrialio.ko \
	$(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
	$(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
	$(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
	$(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
  AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
endef

define KernelPackage/iio-core/description
 The industrial I/O subsystem provides a unified framework for
 drivers for many different types of embedded sensors using a
 number of different physical interfaces (i2c, spi, etc)
endef

$(eval $(call KernelPackage,iio-core))


define KernelPackage/iio-ad799x
  SUBMENU:=$(OTHER_MENU)
  DEPENDS:=kmod-i2c-core kmod-iio-core
  TITLE:=Analog Devices AD799x ADC driver
  KCONFIG:= \
	CONFIG_AD799X_RING_BUFFER=y \
	CONFIG_AD799X
  FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
  AUTOLOAD:=$(call AutoLoad,56,ad799x)
endef

define KernelPackage/iio-ad799x/description
 support for Analog Devices:
 ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
 i2c analog to digital converters (ADC).
endef

$(eval $(call KernelPackage,iio-ad799x))


define KernelPackage/iio-dht11
  SUBMENU:=$(OTHER_MENU)
  DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
  TITLE:=DHT11 (and compatible) humidity and temperature sensors
  KCONFIG:= \
	CONFIG_DHT11
  FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
  AUTOLOAD:=$(call AutoLoad,56,dht11)
endef

define KernelPackage/iio-dht11/description
 support for DHT11 and DHT22 digitial humidity and temperature sensors
 attached at GPIO lines. You will need a custom device tree file to
 specify the GPIO line to use.
endef

$(eval $(call KernelPackage,iio-dht11))


define KernelPackage/lp
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Parallel port and line printer support
  KCONFIG:= \
	CONFIG_PARPORT \
	CONFIG_PRINTER \
	CONFIG_PPDEV
  FILES:= \
	$(LINUX_DIR)/drivers/parport/parport.ko \
	$(LINUX_DIR)/drivers/char/lp.ko \
	$(LINUX_DIR)/drivers/char/ppdev.ko
  AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
endef

$(eval $(call KernelPackage,lp))


define KernelPackage/mmc
  SUBMENU:=$(OTHER_MENU)
  TITLE:=MMC/SD Card Support
  KCONFIG:= \
	CONFIG_MMC \
	CONFIG_MMC_BLOCK \
	CONFIG_MMC_DEBUG=n \
	CONFIG_MMC_UNSAFE_RESUME=n \
	CONFIG_MMC_BLOCK_BOUNCE=y \
	CONFIG_MMC_TIFM_SD=n \
	CONFIG_MMC_WBSD=n \
	CONFIG_SDIO_UART=n
  FILES:= \
	$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
	$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
  AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef

define KernelPackage/mmc/description
 Kernel support for MMC/SD cards
endef

$(eval $(call KernelPackage,mmc))


define KernelPackage/sdhci
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Secure Digital Host Controller Interface support
  DEPENDS:=+kmod-mmc
  KCONFIG:= \
	CONFIG_MMC_SDHCI \
	CONFIG_MMC_SDHCI_PLTFM \
	CONFIG_MMC_SDHCI_PCI=n
  FILES:= \
	$(LINUX_DIR)/drivers/mmc/host/sdhci.ko \
	$(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko

  AUTOLOAD:=$(call AutoProbe,sdhci-pltfm,1)
endef

define KernelPackage/sdhci/description
 Kernel support for SDHCI Hosts
endef

$(eval $(call KernelPackage,sdhci))


define KernelPackage/rfkill
  SUBMENU:=$(OTHER_MENU)
  TITLE:=RF switch subsystem support
  DEPENDS:=@USE_RFKILL +kmod-input-core
  KCONFIG:= \
    CONFIG_RFKILL_FULL \
    CONFIG_RFKILL_INPUT=y \
    CONFIG_RFKILL_LEDS=y
  FILES:= \
    $(LINUX_DIR)/net/rfkill/rfkill.ko
  AUTOLOAD:=$(call AutoLoad,20,rfkill)
endef

define KernelPackage/rfkill/description
 Say Y here if you want to have control over RF switches
 found on many WiFi and Bluetooth cards
endef

$(eval $(call KernelPackage,rfkill))


define KernelPackage/softdog
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Software watchdog driver
  KCONFIG:=CONFIG_SOFT_WATCHDOG
  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
  AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef

define KernelPackage/softdog/description
 Software watchdog driver
endef

$(eval $(call KernelPackage,softdog))


define KernelPackage/ssb
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Silicon Sonics Backplane glue code
  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
  KCONFIG:=\
	CONFIG_SSB \
	CONFIG_SSB_B43_PCI_BRIDGE=y \
	CONFIG_SSB_DRIVER_MIPS=n \
	CONFIG_SSB_DRIVER_PCICORE=y \
	CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
	CONFIG_SSB_PCIHOST=y \
	CONFIG_SSB_PCIHOST_POSSIBLE=y \
	CONFIG_SSB_POSSIBLE=y \
	CONFIG_SSB_SPROM=y \
	CONFIG_SSB_SILENT=y
  FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
  AUTOLOAD:=$(call AutoLoad,18,ssb,1)
endef

define KernelPackage/ssb/description
 Silicon Sonics Backplane glue code.
endef

$(eval $(call KernelPackage,ssb))


define KernelPackage/bcma
  SUBMENU:=$(OTHER_MENU)
  TITLE:=BCMA support
  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
  KCONFIG:=\
	CONFIG_BCMA \
	CONFIG_BCMA_POSSIBLE=y \
	CONFIG_BCMA_BLOCKIO=y \
	CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
	CONFIG_BCMA_HOST_PCI=y \
	CONFIG_BCMA_HOST_SOC=n \
	CONFIG_BCMA_DRIVER_MIPS=n \
	CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
	CONFIG_BCMA_DRIVER_GMAC_CMN=n \
	CONFIG_BCMA_DEBUG=n
  FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
  AUTOLOAD:=$(call AutoLoad,29,bcma)
endef

define KernelPackage/bcma/description
 Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture
endef

$(eval $(call KernelPackage,bcma))


define KernelPackage/rtc-ds1307
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_DS1307 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
  AUTOLOAD:=$(call AutoProbe,rtc-ds1307)
endef

define KernelPackage/rtc-ds1307/description
 Kernel module for Dallas/Maxim DS1307/DS1337/DS1338/DS1340/DS1388/DS3231,
 Epson RX-8025 and various other compatible RTC chips connected via I2C.
endef

$(eval $(call KernelPackage,rtc-ds1307))


define KernelPackage/rtc-ds1374
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Dallas/Maxim DS1374 RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_DS1374 \
	CONFIG_RTC_DRV_DS1374_WDT=n \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1374.ko
  AUTOLOAD:=$(call AutoProbe,rtc-ds1374)
endef

define KernelPackage/rtc-ds1374/description
 Kernel module for Dallas/Maxim DS1374.
endef

$(eval $(call KernelPackage,rtc-ds1374))


define KernelPackage/rtc-ds1672
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Dallas/Maxim DS1672 RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_DS1672 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
  AUTOLOAD:=$(call AutoProbe,rtc-ds1672)
endef

define KernelPackage/rtc-ds1672/description
 Kernel module for Dallas/Maxim DS1672 RTC.
endef

$(eval $(call KernelPackage,rtc-ds1672))


define KernelPackage/rtc-isl1208
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Intersil ISL1208 RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
  AUTOLOAD:=$(call AutoProbe,rtc-isl1208)
endef

define KernelPackage/rtc-isl1208/description
 Kernel module for Intersil ISL1208 RTC.
endef

$(eval $(call KernelPackage,rtc-isl1208))


define KernelPackage/rtc-pcf8563
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Philips PCF8563/Epson RTC8564 RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
  AUTOLOAD:=$(call AutoProbe,rtc-pcf8563)
endef

define KernelPackage/rtc-pcf8563/description
 Kernel module for Philips PCF8563 RTC chip.
 The Epson RTC8564 should work as well.
endef

$(eval $(call KernelPackage,rtc-pcf8563))


define KernelPackage/rtc-pcf2123
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Philips PCF2123 RTC support
  DEPENDS:=@RTC_SUPPORT
  KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
  AUTOLOAD:=$(call AutoProbe,rtc-pcf2123)
endef

define KernelPackage/rtc-pcf2123/description
 Kernel module for Philips PCF2123 RTC chip
endef

$(eval $(call KernelPackage,rtc-pcf2123))

define KernelPackage/rtc-pt7c4338
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Pericom PT7C4338 RTC support
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
  AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
endef

define KernelPackage/rtc-pt7c4338/description
 Kernel module for Pericom PT7C4338 i2c RTC chip
endef

$(eval $(call KernelPackage,rtc-pt7c4338))

define KernelPackage/rtc-rs5c372a
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
  DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
  KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
	CONFIG_RTC_CLASS=y
  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
  AUTOLOAD:=$(call AutoLoad,50,rtc-rs5c372,1)
endef

define KernelPackage/rtc-rs5c372a/description
 Kernel module for Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A RTC on chip module
endef

$(eval $(call KernelPackage,rtc-rs5c372a))


define KernelPackage/mtdtests
  SUBMENU:=$(OTHER_MENU)
  TITLE:=MTD subsystem tests
  KCONFIG:=CONFIG_MTD_TESTS
  FILES:=\
	$(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
	$(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
endef

define KernelPackage/mtdtests/description
 Kernel modules for MTD subsystem/driver testing
endef

$(eval $(call KernelPackage,mtdtests))


define KernelPackage/serial-8250
  SUBMENU:=$(OTHER_MENU)
  TITLE:=8250 UARTs
  KCONFIG:= CONFIG_SERIAL_8250 \
	CONFIG_SERIAL_8250_NR_UARTS=16 \
  	CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
  	CONFIG_SERIAL_8250_EXTENDED=y \
  	CONFIG_SERIAL_8250_MANY_PORTS=y \
	CONFIG_SERIAL_8250_SHARE_IRQ=y \
	CONFIG_SERIAL_8250_DETECT_IRQ=n \
	CONFIG_SERIAL_8250_RSA=n
  FILES:= \
	$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
	$(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4
endef

define KernelPackage/serial-8250/description
 Kernel module for 8250 UART based serial ports
endef

$(eval $(call KernelPackage,serial-8250))


define KernelPackage/regmap
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Generic register map support
  DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
  KCONFIG:=CONFIG_REGMAP \
	   CONFIG_REGMAP_MMIO \
	   CONFIG_REGMAP_SPI \
	   CONFIG_REGMAP_I2C \
	   CONFIG_SPI=y
  FILES:= \
	$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
	$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
	$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
	$(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
  AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
endef

define KernelPackage/regmap/description
 Generic register map support
endef

$(eval $(call KernelPackage,regmap))

define KernelPackage/ikconfig
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Kernel configuration via /proc/config.gz
  KCONFIG:=CONFIG_IKCONFIG \
	   CONFIG_IKCONFIG_PROC=y
  FILES:=$(LINUX_DIR)/kernel/configs.ko
  AUTOLOAD:=$(call AutoLoad,70,configs)
endef

define KernelPackage/ikconfig/description
 Kernel configuration via /proc/config.gz
endef

$(eval $(call KernelPackage,ikconfig))


define KernelPackage/zram
  SUBMENU:=$(OTHER_MENU)
  TITLE:=ZRAM
  DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
  KCONFIG:= \
	CONFIG_ZSMALLOC \
	CONFIG_ZRAM \
	CONFIG_ZRAM_DEBUG=n \
	CONFIG_PGTABLE_MAPPING=n \
	CONFIG_ZSMALLOC_STAT=n \
	CONFIG_ZRAM_LZ4_COMPRESS=y
  FILES:= \
	$(LINUX_DIR)/mm/zsmalloc.ko \
	$(LINUX_DIR)/drivers/block/zram/zram.ko
  AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram)
endef

define KernelPackage/zram/description
 Compressed RAM block device support
endef

$(eval $(call KernelPackage,zram))


define KernelPackage/pps
  SUBMENU:=$(OTHER_MENU)
  TITLE:=PPS support
  KCONFIG:=CONFIG_PPS
  FILES:=$(LINUX_DIR)/drivers/pps/pps_core.ko
  AUTOLOAD:=$(call AutoLoad,17,pps_core,1)
endef

define KernelPackage/pps/description
 PPS (Pulse Per Second) is a special pulse provided by some GPS
 antennae. Userland can use it to get a high-precision time
 reference.
endef

$(eval $(call KernelPackage,pps))


define KernelPackage/pps-gpio
  SUBMENU:=$(OTHER_MENU)
  TITLE:=PPS client using GPIO
  DEPENDS:=+kmod-pps
  KCONFIG:=CONFIG_PPS_CLIENT_GPIO
  FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-gpio.ko
  AUTOLOAD:=$(call AutoLoad,18,pps-gpio,1)
endef

define KernelPackage/pps-gpio/description
 Support for a PPS source using GPIO. To be useful you must
 also register a platform device specifying the GPIO pin and
 other options, usually in your board setup.
endef

$(eval $(call KernelPackage,pps-gpio))


define KernelPackage/pps-ldisc
  SUBMENU:=$(OTHER_MENU)
  TITLE:=PPS line discipline
  DEPENDS:=+kmod-pps
  KCONFIG:=CONFIG_PPS_CLIENT_LDISC
  FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-ldisc.ko
  AUTOLOAD:=$(call AutoLoad,18,pps-ldisc,1)
endef

define KernelPackage/pps-ldisc/description
 Support for a PPS source connected with the CD (Carrier
 Detect) pin of your serial port.
endef

$(eval $(call KernelPackage,pps-ldisc))


define KernelPackage/ptp
  SUBMENU:=$(OTHER_MENU)
  TITLE:=PTP clock support
  DEPENDS:=+kmod-pps
  KCONFIG:= \
	CONFIG_PTP_1588_CLOCK \
	CONFIG_NET_PTP_CLASSIFY=y
  FILES:=$(LINUX_DIR)/drivers/ptp/ptp.ko
  AUTOLOAD:=$(call AutoLoad,18,ptp,1)
endef

define KernelPackage/ptp/description
 The IEEE 1588 standard defines a method to precisely
 synchronize distributed clocks over Ethernet networks.
endef

$(eval $(call KernelPackage,ptp))


define KernelPackage/ptp-gianfar
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Freescale Gianfar PTP support
  DEPENDS:=@TARGET_mpc85xx +kmod-ptp
  KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
  FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
  AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
endef

define KernelPackage/ptp-gianfar/description
 Kernel module for IEEE 1588 support for Freescale
 Gianfar Ethernet drivers
endef

$(eval $(call KernelPackage,ptp-gianfar))


define KernelPackage/random-core
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Hardware Random Number Generator Core support
  KCONFIG:=CONFIG_HW_RANDOM
  FILES:=$(LINUX_DIR)/drivers/char/hw_random/rng-core.ko
endef

define KernelPackage/random-core/description
 Kernel module for the HW random number generator core infrastructure
endef

$(eval $(call KernelPackage,random-core))

define KernelPackage/random-omap
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Hardware Random Number Generator OMAP support
  KCONFIG:=CONFIG_HW_RANDOM_OMAP
  FILES:=$(LINUX_DIR)/drivers/char/hw_random/omap-rng.ko
  DEPENDS:=@TARGET_omap24xx +kmod-random-core
  AUTOLOAD:=$(call AutoProbe,random-omap)
endef

define KernelPackage/random-omap/description
 Kernel module for the OMAP Random Number Generator
 found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx multimedia processors.
endef

$(eval $(call KernelPackage,random-omap))

define KernelPackage/thermal
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Generic Thermal sysfs driver
  DEPENDS:=+kmod-hwmon-core
  HIDDEN:=1
  KCONFIG:= \
	CONFIG_THERMAL \
	CONFIG_THERMAL_OF=y \
	CONFIG_CPU_THERMAL=y \
	CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
	CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
	CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
	CONFIG_THERMAL_GOV_FAIR_SHARE=n \
	CONFIG_THERMAL_GOV_STEP_WISE=y \
	CONFIG_THERMAL_GOV_USER_SPACE=n \
	CONFIG_THERMAL_HWMON=y \
	CONFIG_THERMAL_EMULATION=n
  FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
  AUTOLOAD:=$(call AutoProbe,thermal_sys)
endef

define KernelPackage/thermal/description
 Generic Thermal Sysfs driver offers a generic mechanism for thermal
 management. Usually it's made up of one or more thermal zone and cooling
 device.
endef

$(eval $(call KernelPackage,thermal))


define KernelPackage/gpio-beeper
  SUBMENU:=$(OTHER_MENU)
  TITLE:=GPIO beeper support
  DEPENDS:=+kmod-input-core
  KCONFIG:= \
	CONFIG_INPUT_MISC=y \
	CONFIG_INPUT_GPIO_BEEPER
  FILES:= \
	$(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
  AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
endef

define KernelPackage/gpio-beeper/description
 This enables playing beeps through an GPIO-connected buzzer
endef

$(eval $(call KernelPackage,gpio-beeper))


define KernelPackage/echo
  SUBMENU:=$(OTHER_MENU)
  TITLE:=Line Echo Canceller
  KCONFIG:=CONFIG_ECHO
  FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
  AUTOLOAD:=$(call AutoLoad,50,echo)
endef

define KernelPackage/echo/description
 This driver provides line echo cancelling support for mISDN and
 DAHDI drivers
endef

$(eval $(call KernelPackage,echo))


define KernelPackage/bmp085
  SUBMENU:=$(OTHER_MENU)
  TITLE:=BMP085/BMP18x pressure sensor
  DEPENDS:= +kmod-regmap @!LINUX_3_18 @!LINUX_4_1
  KCONFIG:= CONFIG_BMP085
  FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
endef

define KernelPackage/bmp085/description
 This driver adds support for Bosch Sensortec's digital pressure
 sensors BMP085 and BMP18x.
endef

$(eval $(call KernelPackage,bmp085))


define KernelPackage/bmp085-i2c
  SUBMENU:=$(OTHER_MENU)
  TITLE:=BMP085/BMP18x pressure sensor I2C
  DEPENDS:= +kmod-bmp085
  KCONFIG:= CONFIG_BMP085_I2C
  FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
  AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
endef
define KernelPackage/bmp085-i2c/description
 This driver adds support for Bosch Sensortec's digital pressure
 sensor connected via I2C.
endef

$(eval $(call KernelPackage,bmp085-i2c))


define KernelPackage/bmp085-spi
  SUBMENU:=$(OTHER_MENU)
  TITLE:=BMP085/BMP18x pressure sensor SPI
  DEPENDS:= +kmod-bmp085
  KCONFIG:= CONFIG_BMP085_SPI
  FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
  AUTOLOAD:=$(call AutoProbe,bmp085-spi)
endef
define KernelPackage/bmp085-spi/description
 This driver adds support for Bosch Sensortec's digital pressure
 sensor connected via SPI.
endef

$(eval $(call KernelPackage,bmp085-spi))