|
@@ -1,4 +1,6 @@
|
|
|
-# TP-WR841ND
|
|
|
+# TP-WR841N[D]
|
|
|
+
|
|
|
+TP-WR841N and TP-WR841ND is one and the same model, except TP-WR841ND has detachable antennas.
|
|
|
|
|
|
## Specs
|
|
|
|
|
@@ -20,6 +22,20 @@ DO NOT BUY v13!!! V13 contains a mediatek
|
|
|
chipset, which requires a non-free firmware
|
|
|
blob.
|
|
|
|
|
|
-## Reset instructions
|
|
|
+## Flashing from Web GUI
|
|
|
+
|
|
|
+Flashing instructions listed below were tested with TP-WR841N ver 8, with original firmware version 3.13.33.
|
|
|
+
|
|
|
+1. Reset to factory default state (don't really know if it's required, but definitely won't do any harm).
|
|
|
+2. Go to 192.168.0.1 and login with default credentials (admin/admin)
|
|
|
+3. Navigate to _System Tools -> Firmware Upgrade_ and provide factory bin file. Press Upgrade to perform flash.
|
|
|
+4. After router is flashed and restarted make sure to stop NetworkManager service (might not be required, but I couldn't access libreCMC web interface without stopping it).
|
|
|
+5. Go to 192.168.10.1 and login with default credentials (root/root).
|
|
|
+6. Navigate to _System-> Backup/Flash Firmware_ and in "Flash new firmware image" section provide sysupgrade bin file. Press Flash image to perform flash.
|
|
|
+7. After successfull flash NetworkManager can be started again.
|
|
|
+
|
|
|
+## Hard reset instructions
|
|
|
|
|
|
-???
|
|
|
+1. Press and hold RESET button for several seconds.
|
|
|
+2. Release the button when SYS (gear) led starts blinking.
|
|
|
+3. Wait for router to boot.
|