Add support for the GnuBee Personal Cloud One from master

target/linux/ramips/Makefile

@@ -10,7 +10,7 @@ ARCH:=mipsel
 BOARD:=ramips
 BOARDNAME:=MediaTek Ralink MIPS
 SUBTARGETS:=rt305x mt7620 mt7621 mt7628 mt7688 rt3883 rt288x
-FEATURES:=squashfs gpio
+FEATURES:=squashfs gpio mips16
 MAINTAINER:=John Crispin <john@phrozen.org>
 
 KERNEL_PATCHVER:=4.4

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -171,6 +171,9 @@ fonera20n)
 	set_usb_led "$board:orange:usb"
 	set_wifi_led "$board:orange:wifi"
 	;;
+gb-pc1|\
+	ucidef_set_led_default "$board:green:status"
+	;;
 gl-mt300a|\
 gl-mt300n|\
 gl-mt750)
@@ -311,9 +314,6 @@ vocore)
 	ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
 	set_wifi_led "$board:green:status"
 	;;
-vocore2)
-	set_wifi_led "$board:fuchsia:status"
-	;;
 w502u)
 	set_usb_led "$board:blue:usb"
 	set_wifi_led "rt2800pci-phy0::radio"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -53,8 +53,6 @@ ramips_setup_interfaces()
 	microwrt|\
 	mpr-a2|\
 	ncs601w|\
-	omega2 | \
-	omega2p | \
 	timecloud|\
 	w150m|\
 	widora-neo|\
@@ -77,6 +75,7 @@ ramips_setup_interfaces()
 	dir-320-b1|\
 	dir-610-a1|\
 	dir-615-h1|\
+	gb-pc1|\
 	firewrt|\
 	hlk-rm04|\
 	mac1200rv2|\
@@ -124,6 +123,7 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
 		;;
 	asl26555|\
+	re6500|\
 	rp-n53)
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
@@ -234,12 +234,11 @@ ramips_setup_interfaces()
 			"0:lan" "4:lan" "6t@eth0"
 		;;
 	newifi-d1)
+		ucidef_set_interface_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" \
-		"1:lan:2" "2:lan:1" "4:wan" "6@eth0"
-		;;
-	re6500)
-		ucidef_add_switch "switch0" \
-			"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
+			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6t@eth0" "7t@eth0"
+		ucidef_add_switch "switch1" \
+			"4:lan" "6t@eth0" "7t@eth0"
 		;;
 	rt-n56u)
 		ucidef_add_switch "switch0" \
@@ -251,10 +250,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
-	vocore2)
-		ucidef_add_switch "switch0" \
-			"0:lan" "2:lan" "6t@eth0"
-		;;
 	f5d8235-v1|\
 	tew-714tru|\
 	v11st-fe|\
@@ -368,11 +363,6 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$lan_mac" 2)
 		;;
-	omega2|\
-	omega2p)
-		wan_mac=$(mtd_get_mac_binary factory 4)
-		lan_mac=$(mtd_get_mac_binary factory 46)
-		;;
 	oy-0001)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)

target/linux/ramips/base-files/etc/diag.sh

@@ -69,6 +69,7 @@ get_status_led() {
 	dir-620-a1|\
 	dir-620-d1|\
 	dwr-512-b|\
+	gb-pc1|\
 	hpm|\
 	hw550-3g|\
 	mac1200rv2|\
@@ -172,10 +173,6 @@ get_status_led() {
 	newifi-d1)
 		status_led="$board:blue:status"
 		;;
-	omega2| \
-	omega2p)
-		status_led="$board:amber:system"
-		;;
 	oy-0001|\
 	sl-r7205|\
 	zbt-we826)
@@ -210,9 +207,6 @@ get_status_led() {
 	v22rw-2x2)
 		status_led="$board:green:security"
 		;;
-	vocore2)
-		status_led="$board:fuchsia:status"
-		;;
 	w306r-v20|\
 	witi|\
 	zbt-wr8305rt)

target/linux/ramips/base-files/lib/ramips.sh

@@ -202,6 +202,9 @@ ramips_board_detect() {
 	*"FreeStation5")
 		name="freestation5"
 		;;
+	*"GB-PC1")
+		name="gb-pc1"
+		;;
 	*"GL-MT300A")
 		name="gl-mt300a"
 		;;
@@ -364,12 +367,6 @@ ramips_board_detect() {
 	*"NW718")
 		name="nw718"
 		;;
-	*"Onion Omega2")
-		name="omega2"
-		;;
-	*"Onion Omega2+")
-		name="omega2p"
-		;;
 	*"OY-0001")
 		name="oy-0001"
 		;;
@@ -481,9 +478,6 @@ ramips_board_detect() {
 	*"VoCore (16M)")
 		name="vocore-16M"
 		;;
-	*"VoCore2")
-		name="vocore2"
-		;;
 	*"VR500")
 		name="vr500"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -57,6 +57,7 @@ platform_check_image() {
 	firewrt|\
 	fonera20n|\
 	freestation5|\
+	gb-pc1|\
 	gl-mt300a|\
 	gl-mt300n|\
 	gl-mt750|\
@@ -102,8 +103,6 @@ platform_check_image() {
 	newifi-d1|\
 	nixcore|\
 	nw718|\
-	omega2|\
-	omega2p|\
 	oy-0001|\
 	pbr-d1|\
 	pbr-m1|\
@@ -135,7 +134,6 @@ platform_check_image() {
 	ur-336un|\
 	v22rw-2x2|\
 	vocore|\
-	vocore2|\
 	vr500|\
 	w150m|\
 	w2914nsv2|\

target/linux/ramips/dts/GB-PC1.dts

@@ -0,0 +1,135 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "GB-PC1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	palmbus@1E000000 {
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "jedec,spi-nor";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+				m25p,chunked-io = <32>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+				};
+
+				partition@40000 {
+					label = "firmware";
+					reg = <0x50000 0x1fb0000>;
+				};
+
+			};
+		};
+
+		i2c@900 {
+			compatible = "ralink,i2c-mt7621";
+			reg = <0x900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+			status = "okay";
+		};
+	};
+
+	pcie@1e140000 {
+		status = "okay";
+	};
+
+	ethernet@1e100000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "gnubee:green:status";
+			gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		system {
+			label = "gnubee:green:system";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-power {
+		compatible = "gpio-power";
+
+		26 {
+			label = "gnubee:power:gpio26";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		28 {
+			label = "gnubee:power:gpio28";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		29 {
+			label = "gnubee:power:gpio29";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+
+		30 {
+			label = "gnubee:power:gpio30";
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wdt", "rgmii2", "mdio";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};

target/linux/ramips/dts/OMEGA2.dts

@@ -1,20 +0,0 @@
-/dts-v1/;
-
-#include "OMEGA2.dtsi"
-
-/ {
-	model = "Onion Omega2";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-};
-
-&firmware {
-	reg = <0x50000 0xfb0000>;
-};
-
-&system_led {
-	label = "omega2:amber:system";
-};

target/linux/ramips/dts/OMEGA2.dtsi

@@ -1,170 +0,0 @@
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "onion,omega", "mediatek,mt7628an-soc";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		system_led: system {
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "gpio";
-			ralink,function = "gpio";
-		};
-
-		perst {
-			ralink,group = "perst";
-			ralink,function = "gpio";
-		};
-
-		refclk {
-			ralink,group = "refclk";
-			ralink,function = "gpio";
-		};
-
-		i2s {
-			ralink,group = "i2s";
-			ralink,function = "gpio";
-		};
-
-		spis {
-			ralink,group = "spis";
-			ralink,function = "gpio";
-		};
-
-		wled_kn {
-			ralink,group = "wled_kn";
-			ralink,function = "gpio";
-		};
-
-		wled_an {
-			ralink,group = "wled_an";
-			ralink,function = "gpio";
-		};
-
-		wdt {
-			ralink,group = "wdt";
-			ralink,function = "gpio";
-		};
-
-		pwm0 {
-			ralink,group = "pwm0";
-			ralink,function = "gpio";
-		};
-
-		pwm1 {
-			ralink,group = "pwm1";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&wmac {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		m25p,chunked-io = <31>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		firmware: partition@50000 {
-			label = "firmware";
-		};
-	};
-
-	spidev@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "linux,spidev";
-		reg = <1>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&i2c {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
-	status = "okay";
-	mediatek,cd-low;
-};
-
-&wmac {
-	status = "okay";
-};

target/linux/ramips/dts/OMEGA2P.dts

@@ -1,20 +0,0 @@
-/dts-v1/;
-
-#include "OMEGA2.dtsi"
-
-/ {
-	model = "Onion Omega2+";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-};
-
-&firmware {
-	reg = <0x50000 0x1fb0000>;
-};
-
-&system_led {
-	label = "omega2p:amber:system";
-};

target/linux/ramips/dts/VOCORE2.dts

@@ -1,123 +0,0 @@
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "vocore,VoCore2", "mediatek,mt7628an-soc";
-	model = "VoCore2";
-
-	chosen {
-		bootargs = "console=ttyS2,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "vocore2:fuchsia:status";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "refclk", "gpio";
-			ralink,function = "gpio";
-		};
-
-		agpio {
-			ralink,group = "agpio";
-			ralink,function = "uart2";
-		};
-	};
-
-	uart1_pins: uart1 {
-		uart1 {
-			ralink,group = "uart1";
-			ralink,function = "uart1";
-		};
-	};
-
-	uart2_pins: uart2 {
-		uart2 {
-			ralink,group = "spis";
-			ralink,function = "pwm";
-		};
-	};
-};
-
-&wmac {
-	status = "okay";
-	ralink,mtd-eeprom = <&factory 0x4>;
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		m25p,chunked-io = <32>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0xfb0000>;
-		};
-	};
-};
-
-&esw {
-	mediatek,portmap = <0x7>;
-	mediatek,portdisable = <0x3a>;
-};
-
-&i2s {
-	status = "okay";
-};
-
-&gdma {
-	status = "okay";
-};
-
-&pwm {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};

target/linux/ramips/dts/WLI-TX4-AG300N.dts

@@ -37,7 +37,7 @@
 		};
 
 		partition@50000 {
-			label = "firmware";
+			label = "linux";
 			reg = <0x50000 0x3b0000>;
 		};
 	};
@@ -96,16 +96,7 @@
 	mtd-mac-address = <&factory 0x4>;
 
 	port@0 {
-		mediatek,fixed-link = <100 1 1 1>;
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy0: ethernet-phy@0 {
-			phy-mode = "mii";
-			reg = <0>;
-		};
+		mediatek,fixed-link = <1000 1 1 1>;
 	};
 };
 

target/linux/ramips/dts/WSR-600.dts

@@ -157,27 +157,6 @@
 	};
 };
 
-&pcie {
-	status = "okay";
-
-	pcie0 {
-		rt5592@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			ralink,mtd-eeprom = <&factory 0x8000>;
-		};
-	};
-
-	pcie1 {
-		mt76@1,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x0000>;
-			mediatek,5ghz = <0>;
-		};
-	};
-};
-
 &xhci {
 	status = "disabled";
 };

target/linux/ramips/image/mt7620.mk

@@ -1,464 +0,0 @@
-#
-# MT7620A Profiles
-#
-
-define Build/tplink-header
-	$(STAGING_DIR_HOST)/bin/mktplinkfw2 -a 0x4 -V "ver. 2.0" -B $(1) \
-		-o $@.new -k $@ -r $(IMAGE_ROOTFS) && mv $@.new $@
-endef
-
-define Build/pad-kernel-ex2700
-	cp $@ $@.tmp && dd if=/dev/zero bs=64 count=1 >> $@.tmp \
-		&& dd if=$@.tmp of=$@.new bs=64k conv=sync && truncate -s -64 $@.new \
-		&& cat ex2700-fakeroot.uImage >> $@.new && rm $@.tmp && mv $@.new $@
-endef
-
-define Build/netgear-header
-	$(STAGING_DIR_HOST)/bin/mkdniimg \
-		$(1) -v OpenWrt -i $@ \
-		-o $@.new && mv $@.new $@
-endef
-
-define Build/elecom-header
-	cp $@ $(KDIR)/v_0.0.0.bin
-	( \
-		mkhash md5 $(KDIR)/v_0.0.0.bin && \
-		echo 458 \
-	) | mkhash md5 > $(KDIR)/v_0.0.0.md5
-	$(STAGING_DIR_HOST)/bin/tar -cf $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
-endef
-
-define Build/zyimage
-	$(STAGING_DIR_HOST)/bin/zyimage $(1) $@
-endef
-
-define Device/ArcherC20i
-  DTS := ArcherC20i
-  SUPPORTED_DEVICES := c20i
-  KERNEL := $(KERNEL_DTB)
-  KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherC20i -c
-  IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC20i -j | append-metadata
-  DEVICE_TITLE := TP-Link ArcherC20i
-endef
-TARGET_DEVICES += ArcherC20i
-
-define Device/ArcherC50
-  DTS := ArcherC50
-  SUPPORTED_DEVICES := c50
-  KERNEL := $(KERNEL_DTB)
-  KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherC50 -c
-  IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC50 -j | append-metadata
-  DEVICE_TITLE := TP-Link ArcherC50
-endef
-TARGET_DEVICES += ArcherC50
-
-define Device/ArcherMR200
-  DTS := ArcherMR200
-  SUPPORTED_DEVICES := mr200
-  KERNEL := $(KERNEL_DTB)
-  KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherMR200 -c
-  IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherMR200 -j | append-metadata
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
-  DEVICE_TITLE := TP-Link ArcherMR200
-endef
-TARGET_DEVICES += ArcherMR200
-
-define Device/ex2700
-  DTS := EX2700
-  BLOCKSIZE := 4k
-  IMAGE_SIZE := $(ralink_default_fw_size_4M)
-  IMAGES += factory.bin
-  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	netgear-header -B EX2700 -H 29764623+4+0+32+2x2+0
-  DEVICE_TITLE := Netgear EX2700
-endef
-TARGET_DEVICES += ex2700
-
-define Device/wt3020-4M
-  DTS := WT3020-4M
-  BLOCKSIZE := 4k
-  IMAGE_SIZE := $(ralink_default_fw_size_4M)
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	poray-header -B WT3020 -F 4M
-  DEVICE_TITLE := Nexx WT3020 (4MB)
-endef
-TARGET_DEVICES += wt3020-4M
-
-define Device/wt3020-8M
-  DTS := WT3020-8M
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	poray-header -B WT3020 -F 8M
-  DEVICE_TITLE := Nexx WT3020 (8MB)
-endef
-TARGET_DEVICES += wt3020-8M
-
-define Device/wrh-300cr
-  DTS := WRH-300CR
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	elecom-header
-  DEVICE_TITLE := Elecom WRH-300CR 
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
-endef
-TARGET_DEVICES += wrh-300cr
-
-define Device/e1700
-  DTS := E1700
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	umedia-header 0x013326
-  DEVICE_TITLE := Linksys E1700
-endef
-TARGET_DEVICES += e1700
-
-define Device/ai-br100
-  DTS := AI-BR100
-  IMAGE_SIZE := 7936k
-  DEVICE_TITLE := Aigale Ai-BR100
-  DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci
-endef
-TARGET_DEVICES += ai-br100
-
-define Device/whr-300hp2
-  DTS := WHR-300HP2
-  IMAGE_SIZE := 6848k
-  DEVICE_TITLE := Buffalo WHR-300HP2
-endef
-TARGET_DEVICES += whr-300hp2
-
-define Device/whr-600d
-  DTS := WHR-600D
-  IMAGE_SIZE := 6848k
-  DEVICE_TITLE := Buffalo WHR-600D
-endef
-TARGET_DEVICES += whr-600d
-
-define Device/whr-1166d
-  DTS := WHR-1166D
-  IMAGE_SIZE := 15040k
-  DEVICE_TITLE := Buffalo WHR-1166D
-endef
-TARGET_DEVICES += whr-1166d
-
-define Device/dir-810l
-  DTS := DIR-810L
-  IMAGE_SIZE := 6720k
-  DEVICE_TITLE := D-Link DIR-810L
-endef
-TARGET_DEVICES += dir-810l
-
-define Device/na930
-  DTS := NA930
-  IMAGE_SIZE := 20m
-  DEVICE_TITLE := Sercomm NA930
-endef
-TARGET_DEVICES += na930
-
-define Device/microwrt
-  DTS := MicroWRT
-  IMAGE_SIZE := 16128k
-  DEVICE_TITLE := Microduino MicroWRT
-endef
-TARGET_DEVICES += microwrt
-
-define Device/mt7620a
-  DTS := MT7620a
-  DEVICE_TITLE := MediaTek MT7620a EVB
-endef
-TARGET_DEVICES += mt7620a
-
-define Device/mt7620a_mt7610e
-  DTS := MT7620a_MT7610e
-  DEVICE_TITLE := MediaTek MT7620a + MT7610e EVB
-endef
-TARGET_DEVICES += mt7620a_mt7610e
-
-define Device/mt7620a_mt7530
-  DTS := MT7620a_MT7530
-  DEVICE_TITLE := MediaTek MT7620a + MT7530 EVB
-endef
-TARGET_DEVICES += mt7620a_mt7530
-
-define Device/mt7620a_v22sg
-  DTS := MT7620a_V22SG
-  DEVICE_TITLE := MediaTek MT7620a V22SG
-endef
-TARGET_DEVICES += mt7620a_v22sg
-
-define Device/rp-n53
-  DTS := RP-N53
-  DEVICE_TITLE := Asus RP-N53
-endef
-TARGET_DEVICES += rp-n53
-
-define Device/cf-wr800n
-  DTS := CF-WR800N
-  DEVICE_TITLE := Comfast CF-WR800N
-endef
-TARGET_DEVICES += cf-wr800n
-
-define Device/cs-qr10
-  DTS := CS-QR10
-  DEVICE_TITLE := Planex CS-QR10
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-i2c-core kmod-i2c-ralink kmod-sound-core kmod-sound-mtk kmod-sdhci-mt7620
-endef
-TARGET_DEVICES += cs-qr10
-
-define Device/db-wrt01
-  DTS := DB-WRT01
-  DEVICE_TITLE := Planex DB-WRT01
-endef
-TARGET_DEVICES += db-wrt01
-
-define Device/mzk-750dhp
-  DTS := MZK-750DHP
-  DEVICE_TITLE := Planex MZK-750DHP
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += mzk-750dhp
-
-define Device/mzk-ex300np
-  DTS := MZK-EX300NP
-  DEVICE_TITLE := Planex MZK-EX300NP
-endef
-TARGET_DEVICES += mzk-ex300np
-
-define Device/mzk-ex750np
-  DTS := MZK-EX750NP
-  DEVICE_TITLE := Planex MZK-EX750NP
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += mzk-ex750np
-
-define Device/hc5661
-  DTS := HC5661
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := HiWiFi HC5661
-  DEVICE_PACKAGES := kmod-usb2 kmod-sdhci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += hc5661
-
-define Device/hc5761
-  DTS := HC5761
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := HiWiFi HC5761 
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += hc5761
-
-define Device/hc5861
-  DTS := HC5861
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := HiWiFi HC5861
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += hc5861
-
-define Device/oy-0001
-  DTS := OY-0001
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Oh Yeah OY-0001
-endef
-TARGET_DEVICES += oy-0001
-
-define Device/psg1208
-  DTS := PSG1208
-  DEVICE_TITLE := Phicomm PSG1208
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += psg1208
-
-define Device/psg1218
-  DTS := PSG1218
-  DEVICE_TITLE := Phicomm PSG1218
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += psg1218
-
-define Device/y1
-  DTS := Y1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Lenovo Y1
-endef
-TARGET_DEVICES += y1
-
-define Device/y1s
-  DTS := Y1S
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Lenovo Y1S
-endef
-TARGET_DEVICES += y1s
-
-define Device/mlw221
-  DTS := MLW221
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Kingston MLW221
-endef
-TARGET_DEVICES += mlw221
-
-define Device/mlwg2
-  DTS := MLWG2
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Kingston MLWG2
-endef
-TARGET_DEVICES += mlwg2
-
-define Device/wmr-300
-  DTS := WMR-300
-  DEVICE_TITLE := Buffalo WMR-300
-endef
-TARGET_DEVICES += wmr-300
-
-define Device/rt-n14u
-  DTS := RT-N14U
-  DEVICE_TITLE := Asus RT-N14u
-endef
-TARGET_DEVICES += rt-n14u
-
-define Device/wrtnode
-  DTS := WRTNODE
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := WRTNode
-endef
-TARGET_DEVICES += wrtnode
-
-define Device/miwifi-mini
-  DTS := MIWIFI-MINI
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Xiaomi MiWiFi Mini
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
-endef
-TARGET_DEVICES += miwifi-mini
-
-define Device/gl-mt300a
-  DTS := GL-MT300A
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := GL-Inet GL-MT300A
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
-endef
-TARGET_DEVICES += gl-mt300a
-
-define Device/gl-mt300n
-  DTS := GL-MT300N
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := GL-Inet GL-MT300N
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
-endef
-TARGET_DEVICES += gl-mt300n
-
-define Device/gl-mt750
-  DTS := GL-MT750
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := GL-Inet GL-MT750
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
-endef
-TARGET_DEVICES += gl-mt750
-
-define Device/zte-q7
-  DTS := ZTE-Q7
-  DEVICE_TITLE := ZTE Q7
-endef
-TARGET_DEVICES += zte-q7
-
-define Device/youku-yk1
-  DTS := YOUKU-YK1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := YOUKU YK1
-endef
-TARGET_DEVICES += youku-yk1
-
-define Device/zbt-ape522ii
-  DTS := ZBT-APE522II
-  DEVICE_TITLE := Zbtlink ZBT-APE522II
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += zbt-ape522ii
-
-define Device/zbt-cpe102
-  DTS := ZBT-CPE102
-  DEVICE_TITLE := Zbtlink ZBT-CPE102
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
-endef
-TARGET_DEVICES += zbt-cpe102
-
-define Device/zbt-wa05
-  DTS := ZBT-WA05
-  DEVICE_TITLE := Zbtlink ZBT-WA05
-endef
-TARGET_DEVICES += zbt-wa05
-
-define Device/zbt-we826
-  DTS := ZBT-WE826
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Zbtlink ZBT-WE826
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 
-endef
-TARGET_DEVICES += zbt-we826
-
-define Device/zbt-wr8305rt
-  DTS := ZBT-WR8305RT
-  DEVICE_TITLE := Zbtlink ZBT-WR8305RT
-endef
-TARGET_DEVICES += zbt-wr8305rt
-
-define Device/tiny-ac
-  DTS := TINY-AC
-  DEVICE_TITLE := Dovado Tiny AC
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
-endef
-TARGET_DEVICES += tiny-ac
-
-define Device/dch-m225
-  DTS := DCH-M225
-  BLOCKSIZE := 4k
-  IMAGES += factory.bin
-  IMAGE_SIZE := 6848k
-  IMAGE/sysupgrade.bin := \
-	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.bin := \
-	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
-	append-rootfs | pad-rootfs -x 64 | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	seama-seal -m "signature=wapn22_dlink.2013gui_dap1320b" | \
-	check-size $$$$(IMAGE_SIZE)
-  DEVICE_TITLE := D-Link DCH-M225
-  DEVICE_PACKAGES := kmod-mt76
-endef
-TARGET_DEVICES += dch-m225
-
-define Device/kn_rc
-  DTS := kn_rc
-  DEVICE_TITLE := ZyXEL Keenetic Omni
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
-	zyimage -d 4882 -v "ZyXEL Keenetic Omni"
-endef
-TARGET_DEVICES += kn_rc
-
-define Device/kn_rf
-  DTS := kn_rf
-  DEVICE_TITLE := ZyXEL Keenetic Omni II
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
-	zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
-endef
-TARGET_DEVICES += kn_rf
-
-define Device/kng_rc
-  DTS := kng_rc
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := ZyXEL Keenetic Viva
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
-  IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-	zyimage -d 8997 -v "ZyXEL Keenetic Viva"
-endef
-TARGET_DEVICES += kng_rc

target/linux/ramips/image/mt7621.mk

@@ -2,74 +2,14 @@
 # MT7621 Profiles
 #
 
-define Build/ubnt-erx-factory-image
-	if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
-		echo '21001:6' > $(1).compat; \
-		$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
-		\
-		$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
-		mkhash md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
-		$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
-		\
-		echo "dummy" > $(1).rootfs; \
-		$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
-		\
-		mkhash md5 $(1).rootfs > $(1).md5; \
-		$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
-		\
-		echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
-		$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
-		\
-		$(CP) $(1) $(BIN_DIR)/; \
-	else \
-		echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
-	fi
-endef
-
-define Device/11acnas
-  DTS := 11ACNAS
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := WeVO 11AC NAS Router
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-mt76
-endef
-TARGET_DEVICES += 11acnas
-
-define Device/ac1200pro
-  DTS := AC1200pro
+define Device/gb-pc1
+  DTS := GB-PC1
+  DEVICE_TITLE := GnuBee Personal Cloud One
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci
   IMAGE_SIZE := $(ralink_default_fw_size_32M)
-  DEVICE_TITLE := Digineo AC1200 Pro
-  DEVICE_PACKAGES := kmod-usb3 kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += ac1200pro
-
-define Device/dir-860l-b1
-  DTS := DIR-860L-B1
-  BLOCKSIZE := 64k
-  IMAGES += factory.bin
-  KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  IMAGE/sysupgrade.bin := \
-	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.bin := \
-	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
-	append-rootfs | pad-rootfs -x 64 | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
-	check-size $$$$(IMAGE_SIZE)
-  DEVICE_TITLE := D-Link DIR-860L B1
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport
 endef
-TARGET_DEVICES += dir-860l-b1
 
-define Device/firewrt
-  DTS := FIREWRT
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Firefly FireWRT
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += firewrt
+TARGET_DEVICES += gb-pc1
 
 define Device/mt7621
   DTS := MT7621
@@ -79,148 +19,19 @@ define Device/mt7621
 endef
 TARGET_DEVICES += mt7621
 
-define Device/newifi-d1
-  DTS := Newifi-D1
-  IMAGE_SIZE := $(ralink_default_fw_size_32M)
-  DEVICE_TITLE := Newifi D1
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += newifi-d1
-
-define Device/pbr-m1
-  DTS := PBR-M1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := PBR-M1
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += pbr-m1
-
-define Device/rb750gr3
-  DTS := RB750Gr3
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := MikroTik RB750Gr3
-  DEVICE_PACKAGES := kmod-usb3 uboot-envtools -kmod-mt76 -kmod-rt2x00-lib -kmod-mac80211 -kmod-cfg80211 -wpad-mini -iwinfo
-endef
-TARGET_DEVICES += rb750gr3
-
-define Device/re6500
-  DTS := RE6500
-  DEVICE_TITLE := Linksys RE6500
-endef
-TARGET_DEVICES += re6500
-
-define Device/sap-g3200u3
-  DTS := SAP-G3200U3
-  DEVICE_TITLE := STORYLiNK SAP-G3200U3
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += sap-g3200u3
-
-define Device/sk-wb8
-  DTS := SK-WB8
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := SamKnows Whitebox 8
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport uboot-envtools
-endef
-TARGET_DEVICES += sk-wb8
-
 define Device/timecloud
   DTS := Timecloud
   DEVICE_TITLE := Thunder Timecloud
-  DEVICE_PACKAGES := kmod-usb3
 endef
 TARGET_DEVICES += timecloud
 
-define Device/ubnt-erx
-  DTS := UBNT-ERX
-  FILESYSTEMS := squashfs
-  KERNEL_SIZE := 3145728
-  KERNEL := $(KERNEL_DTB) | uImage lzma
-  IMAGES := sysupgrade.tar
-  KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  DEVICE_TITLE := Ubiquiti EdgeRouter X
-  DEVICE_PACKAGES := -kmod-mt76 -kmod-rt2x00-lib -kmod-mac80211 -kmod-cfg80211 -wpad-mini -iwinfo
-endef
-TARGET_DEVICES += ubnt-erx
-
 define Device/vr500
   DTS := VR500
   IMAGE_SIZE := 66453504
   DEVICE_TITLE := Planex VR500
-  DEVICE_PACKAGES := kmod-usb3
 endef
 TARGET_DEVICES += vr500
 
-define Device/w2914nsv2
-  DTS := W2914NSV2
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := WeVO W2914NS v2
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-mt76
-endef
-TARGET_DEVICES += w2914nsv2
-
-define Device/wf-2881
-  DTS := WF-2881
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  FILESYSTEMS := squashfs
-  IMAGE_SIZE := 129280k
-  KERNEL := $(KERNEL_DTB) | pad-offset $$(BLOCKSIZE) 64 | uImage lzma
-  UBINIZE_OPTS := -E 5
-  IMAGE/sysupgrade.bin := append-kernel | append-ubi | append-metadata | check-size $$$$(IMAGE_SIZE)
-  DEVICE_TITLE := NETIS WF-2881
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += wf-2881
-
-define Device/witi
-  DTS := WITI
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := MQmaker WiTi
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += witi
-
-define Device/wndr3700v5
-  DTS := WNDR3700V5
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Netgear WNDR3700v5
-  DEVICE_PACKAGES := kmod-usb3
-endef
-TARGET_DEVICES += wndr3700v5
-
-define Device/wsr-1166
-  DTS := WSR-1166
-  IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Buffalo WSR-1166
-endef
-TARGET_DEVICES += wsr-1166
-
-define Device/wsr-600
-  DTS := WSR-600
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Buffalo WSR-600
-endef
-TARGET_DEVICES += wsr-600
-
-define Device/zbt-wg2626
-  DTS := ZBT-WG2626
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := ZBT WG2626
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += zbt-wg2626
-
-define Device/zbt-wg3526
-  DTS := ZBT-WG3526
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := ZBT WG3526
-  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += zbt-wg3526
-
 # FIXME: is this still needed?
 define Image/Prepare
 #define Build/Compile

target/linux/ramips/image/mt7628.mk

@@ -19,15 +19,6 @@ define Device/miwifi-nano
 endef
 TARGET_DEVICES += miwifi-nano
 
-define Device/vocore2
-  DTS := VOCORE2
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := VoCore VoCore2
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
-    kmod-sdhci kmod-sdhci-mt7620
-endef
-TARGET_DEVICES += vocore2
-
 define Device/wl-wn575a3
   DTS := WL-WN575A3
   IMAGE_SIZE := $(ralink_default_fw_size_8M)

target/linux/ramips/image/mt7688.mk

@@ -34,19 +34,3 @@ define Device/widora-neo
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
 endef
 TARGET_DEVICES += widora-neo
-
-define Device/omega2
-  DTS := OMEGA2
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := Onion Omega2
-  DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
-endef
-TARGET_DEVICES += omega2
-
-define Device/omega2p
-  DTS := OMEGA2P
-  IMAGE_SIZE := $(ralink_default_fw_size_32M)
-  DEVICE_TITLE := Onion Omega2+
-  DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
-endef
-TARGET_DEVICES += omega2p

target/linux/ramips/image/rt288x.mk

@@ -3,10 +3,7 @@
 #
 
 define Build/gemtek-header
-	if [ -f $@ ]; then \
-		mkheader_gemtek $@ $@.new $(1) && \
-		mv $@.new $@; \
-	fi
+	mkheader_gemtek $@ $@.new $(1) && mv $@.new $@
 endef
 
 define Device/ar670w
@@ -14,7 +11,7 @@ define Device/ar670w
   BLOCKSIZE := 64k
   DEVICE_TITLE := Airlink AR670W
   IMAGE_SIZE := $(ralink_default_fw_size_4M)
-  KERNEL := $(KERNEL_DTB) | pad-to $$(BLOCKSIZE)
+  KERNEL := $(KERNEL_DTB)
   IMAGES += factory.bin
   IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
 	wrg-header wrgn16a_airlink_ar670w
@@ -23,9 +20,9 @@ TARGET_DEVICES += ar670w
 
 define Device/ar725w
   DTS := AR725W
-  DEVICE_TITLE := Airlink AR725W
+  DEVICE_TITLE := Gemtek AR725W
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size 3328k | \
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
 	gemtek-header ar725w
 endef
 TARGET_DEVICES += ar725w

target/linux/ramips/image/rt305x.mk

@@ -296,7 +296,6 @@ TARGET_DEVICES += dir-620-d1
 
 define Device/dwr-512-b
   DTS := DWR-512-B
-  IMAGE_SIZE := 7700k
   DEVICE_TITLE := D-Link DWR-512 B
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-i2c-core kmod-i2c-ralink kmod-spi-dev \
 			kmod-usb-serial kmod-usb-serial-option kmod-usb-serial-wwan comgt

target/linux/ramips/modules.mk

@@ -61,18 +61,18 @@ $(eval $(call KernelPackage,i2c-ralink))
 I2C_MT7621_MODULES:= \
   CONFIG_I2C_MT7621:drivers/i2c/busses/i2c-mt7621
 
-define KernelPackage/i2c-mt7628
+define KernelPackage/i2c-mt7621
   $(call i2c_defaults,$(I2C_MT7621_MODULES),59)
-  TITLE:=MT7628/88 I2C Controller
+  TITLE:=MT7621 I2C Controller
   DEPENDS:=kmod-i2c-core \
-	@(TARGET_ramips_mt7628||TARGET_ramips_mt7688)
+	@(TARGET_ramips_mt7621||TARGET_ramips_mt7628||TARGET_ramips_mt7688)
 endef
 
-define KernelPackage/i2c-mt7628/description
+define KernelPackage/i2c-mt7621/description
  Kernel modules for enable mt7621 i2c controller.
 endef
 
-$(eval $(call KernelPackage,i2c-mt7628))
+$(eval $(call KernelPackage,i2c-mt7621))
 
 define KernelPackage/dma-ralink
   SUBMENU:=Other modules

target/linux/ramips/mt7620/config-4.4

@@ -1,211 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_NO_APPENDED_DTB=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MT7621_WDT is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND_MT7620=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_GSW_MT7620=y
-CONFIG_NET_MEDIATEK_MDIO=y
-CONFIG_NET_MEDIATEK_MDIO_MT7620=y
-CONFIG_NET_MEDIATEK_MT7620=y
-# CONFIG_NET_MEDIATEK_RT3050 is not set
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_MT7621 is not set
-CONFIG_SPI_RT2880=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/ramips/mt7620/profiles/00-default.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-	NAME:=Default Profile
-	PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-	PRIORITY:=1
-endef
-
-define Profile/Default/Description
-	Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))

target/linux/ramips/mt7620/target.mk

@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-SUBTARGET:=mt7620
-BOARDNAME:=MT7620 based boards
-FEATURES+=usb
-CPU_TYPE:=24kc
-
-DEFAULT_PACKAGES += kmod-rt2800-pci kmod-rt2800-soc kmod-mt76
-
-define Target/Description
-	Build firmware images for Ralink MT7620 based boards.
-endef
-

target/linux/ramips/mt7621/target.mk

@@ -7,7 +7,7 @@ BOARDNAME:=MT7621 based boards
 FEATURES+=usb rtc nand
 CPU_TYPE:=24kc
 
-DEFAULT_PACKAGES += kmod-mt76
+DEFAULT_PACKAGES += kmod-usb3
 
 KERNEL_PATCHVER:=4.4
 

target/linux/ramips/mt7628/config-4.4

@@ -1,206 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_NO_APPENDED_DTB=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND_MT7620=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_ESW_RT3050=y
-# CONFIG_NET_MEDIATEK_MT7620 is not set
-CONFIG_NET_MEDIATEK_RT3050=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/ramips/mt7628/profiles/00-default.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-	NAME:=Default Profile
-	PRIORITY:=1
-	PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-endef
-
-define Profile/Default/Description
-	Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))

target/linux/ramips/mt7628/target.mk

@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-SUBTARGET:=mt7628
-BOARDNAME:=MT7628 based boards
-FEATURES+=usb
-CPU_TYPE:=24kc
-
-DEFAULT_PACKAGES += kmod-mt76
-
-define Target/Description
-	Build firmware images for Ralink MT7628 based boards.
-endef
-

target/linux/ramips/mt7688/config-4.4

@@ -1,211 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_SYSTICK_QUIRK=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_RT3352=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MT7621=y
-# CONFIG_GPIO_RALINK is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_FPU_EMULATOR=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_NO_APPENDED_DTB=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_WDT=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND_MT7620=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_MEDIATEK_ESW_RT3050=y
-# CONFIG_NET_MEDIATEK_MT7620 is not set
-CONFIG_NET_MEDIATEK_RT3050=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_RALINK_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RALINK=y
-# CONFIG_RALINK_WDT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MT7621=y
-# CONFIG_SPI_RT2880 is not set
-# CONFIG_SPI_SPIDEV is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/ramips/mt7688/profiles/00-default.mk

@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-	NAME:=Default Profile
-	PRIORITY:=1
-	PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-endef
-
-define Profile/Default/Description
-	Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))

target/linux/ramips/mt7688/target.mk

@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-SUBTARGET:=mt7688
-BOARDNAME:=MT7688 based boards
-FEATURES+=usb
-CPU_TYPE:=24kc
-
-DEFAULT_PACKAGES += kmod-mt76
-
-define Target/Description
-	Build firmware images for Ralink MT7688 based boards.
-endef
-

target/linux/ramips/patches-4.4/0902-mediatek-4-byte-spi-reset.patch

@@ -0,0 +1,43 @@
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index fe9ceb7..2151975 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -27,6 +27,9 @@
+ #include <linux/spi/flash.h>
+ #include <linux/mtd/spi-nor.h>
+ 
++#define OPCODE_RESET_ENABLE	0x66
++#define OPCODE_RESET		0x99
++
+ #define	MAX_CMD_SIZE		6
+ struct m25p {
+ 	struct spi_device	*spi;
+@@ -168,6 +171,17 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
+ 	return 0;
+ }
+ 
++void m25p80_reboot(struct mtd_info *mtd)
++{
++	struct spi_nor *nor = container_of(mtd, struct spi_nor, mtd);
++	struct m25p *flash = nor->priv;
++
++	flash->command[0] = OPCODE_RESET_ENABLE;
++	spi_write(flash->spi, flash->command, 1);
++	flash->command[0] = OPCODE_RESET;
++	spi_write(flash->spi, flash->command, 1);
++}
++
+ /*
+  * board specific setup should have ensured the SPI clock used here
+  * matches what the READ command supports, at least until this driver
+@@ -197,6 +211,7 @@ static int m25p_probe(struct spi_device *spi)
+ 	nor->erase = m25p80_erase;
+ 	nor->write_reg = m25p80_write_reg;
+ 	nor->read_reg = m25p80_read_reg;
++	nor->mtd._reboot = m25p80_reboot;
+ 
+ 	nor->dev = &spi->dev;
+ 	nor->flash_node = spi->dev.of_node;
+-- 
+2.9.3
+

target/linux/ramips/rt288x/target.mk

@@ -4,7 +4,7 @@
 
 SUBTARGET:=rt288x
 BOARDNAME:=RT288x based boards
-CPU_TYPE:=24kc
+CPU_TYPE:=mips32r2
 
 DEFAULT_PACKAGES += kmod-rt2800-soc