You can't mix and match kernel modules from different kernel versions. The released RC3 images are using 4.14.151, not 4.14.152. If you are building libreCMC from the latest source, you need to select the desired modules in make menuconfig when configuring your image.
If you are looking at building images that are compatible with the package feed, you need to start with a configuration seed and checkout the appropriate tag'ed source. Building such images would look like:
1) Checkout correct sources
git checkout v1.5.0-rc3
or
download the correct version from the release page.
2) Get the correct configuration seed, in the case of v1.5.0-rc3, it is config.buildinfo
3) Move config.buildinfo to $SRC_ROOT/.config
4) Run make menuconfig to generate the rest of the configuration and add additional packages which are not dependent on additional kernel modules.
5) Build like normal : make
You can't mix and match kernel modules from different kernel versions. The released RC3 images are using 4.14.151, not 4.14.152. If you are building libreCMC from the latest source, you need to select the desired modules in `make menuconfig` when configuring your image.
If you are looking at building images that are compatible with the package feed, you need to start with a configuration seed and checkout the appropriate tag'ed source. Building such images would look like:
1) Checkout correct sources
`git checkout v1.5.0-rc3`
or
download the correct version from the release page.
2) Get the correct configuration seed, in the case of `v1.5.0-rc3`, it is [config.buildinfo](https://librecmc.org/librecmc/downloads/snapshots/v1.5.0-rc3/targets/ath79/generic/config.buildinfo)
3) Move `config.buildinfo` to `$SRC_ROOT/.config`
4) Run `make menuconfig` to generate the rest of the configuration and add additional packages which are not dependent on additional kernel modules.
5) Build like normal : `make`
I build the Image from source it had kernel 4.14.152 then flashed to my WZR-600DHP. I checked some kmod, but I forgot check kmod-scsi-core and kmod-mass-storage so I tryed to check in menuconfig then make, so the packages was build but when I try to install it mark error on vermagic like this:
opkg install kmod-scsi-core_4.14.152-1_mips_24kc.ipk Installing kmod-scsi-core (4.14.152-1) to root... Collected errors:
satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-scsi-core:
kernel (= 4.14.152-1-490392a6e1)
So I want to build that packages are missing with the same vermagic-hash: 4.14.152-1-490392a6e1)
I build the Image from source it had kernel 4.14.152 then flashed to my WZR-600DHP. I checked some kmod, but I forgot check kmod-scsi-core and kmod-mass-storage so I tryed to check in menuconfig then make, so the packages was build but when I try to install it mark error on vermagic like this:
opkg install kmod-scsi-core_4.14.152-1_mips_24kc.ipk Installing kmod-scsi-core (4.14.152-1) to root... Collected errors:
satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-scsi-core:
kernel (= 4.14.152-1-490392a6e1)
So I want to build that packages are missing with the same vermagic-hash: 4.14.152-1-490392a6e1)
I guess I can not install the missing packages: kmod-scsi-core and kmod-mass-storage because when I rebuild the packages it come with diferent vermagic-hash like: 5465465416 this not match with the first build of kernel vermagic-hash. Only same kernel version 4.14.152-1 but with this I still can not install it...
I guess I can not install the missing packages: kmod-scsi-core and kmod-mass-storage because when I rebuild the packages it come with diferent vermagic-hash like: 546546541654e546554 this not match with the first build of kernel vermagic-hash. Only same kernel version 4.14.152-1 but with this I still can not install it...
HI I am trying to fix this issues, but still not found a solution, I started build librecmc from source then I am learning how this work at all. so the main issues is related on linux-kenel-hash.
HI I am trying to fix this issues, but still not found a solution, I started build librecmc from source then I am learning how this work at all. so the main issues is related on linux-kenel-hash.
make defconfig // will work but not worked in my case for some reason not knowing.
opkg --force-checksum install // kmod-scsi-core_4.14.152-1_mips_24kc.ipk kmod-usb-storage_4.14.152-1_mips_24kc.ipk FIXED to install the modules BUT the system it not load the modules
kmodloader: 4 modules could not be probed
[ 19.161407] kmodloader: - scsi_mod - 0
[ 19.165213] kmodloader: dependency not loaded scsi_mod
[ 19.202078] kmodloader: - sd_mod - 1
[ 19.207906] kmodloader: dependency not loaded usb-storage
[ 19.213384] kmodloader: dependency not loaded scsi_mod
[ 19.236085] kmodloader: - uas - 2
[ 19.239477] kmodloader: dependency not loaded scsi_mod
[ 19.244716] kmodloader: - usb-storage - 1
make defconfig // will work but not worked in my case for some reason not knowing.
opkg --force-checksum install // kmod-scsi-core_4.14.152-1_mips_24kc.ipk kmod-usb-storage_4.14.152-1_mips_24kc.ipk FIXED to install the modules BUT the system it not load the modules
kmodloader: 4 modules could not be probed
[ 19.161407] kmodloader: - scsi_mod - 0
[ 19.165213] kmodloader: dependency not loaded scsi_mod
[ 19.202078] kmodloader: - sd_mod - 1
[ 19.207906] kmodloader: dependency not loaded usb-storage
[ 19.213384] kmodloader: dependency not loaded scsi_mod
[ 19.236085] kmodloader: - uas - 2
[ 19.239477] kmodloader: dependency not loaded scsi_mod
[ 19.244716] kmodloader: - usb-storage - 1
root@libreCMC:/mnt# opkg list-installed kernel kernel - 4.14.152-1-
64b01f0077
root@libreCMC:/mnt# ls kmod-scsi-core_4.14.152-1_mips_24kc.ipk kmod-usb-storage_4.14.152-1_mips_24kc.ipk root@libreCMC:/mnt# rm * root@libreCMC:/mnt# ls kmod-scsi-core_4.14.152-1_mips_24kc.ipk kmod-usb-storage_4.14.152-1_mips_24kc.ipk root@libreCMC:/mnt# opkg install kmod-scsi-core_4.14.152-1_mips_24kc.ipk Installing kmod-scsi-core (4.14.152-1) to root... Collected errors:490392a6e1
)490392a6e1
)You can't mix and match kernel modules from different kernel versions. The released RC3 images are using 4.14.151, not 4.14.152. If you are building libreCMC from the latest source, you need to select the desired modules in
make menuconfig
when configuring your image.If you are looking at building images that are compatible with the package feed, you need to start with a configuration seed and checkout the appropriate tag'ed source. Building such images would look like:
1) Checkout correct sources
git checkout v1.5.0-rc3
or
download the correct version from the release page.
2) Get the correct configuration seed, in the case of
v1.5.0-rc3
, it is config.buildinfo3) Move
config.buildinfo
to$SRC_ROOT/.config
4) Run
make menuconfig
to generate the rest of the configuration and add additional packages which are not dependent on additional kernel modules.5) Build like normal :
make
I build the Image from source it had kernel 4.14.152 then flashed to my WZR-600DHP. I checked some kmod, but I forgot check kmod-scsi-core and kmod-mass-storage so I tryed to check in menuconfig then make, so the packages was build but when I try to install it mark error on vermagic like this: opkg install kmod-scsi-core_4.14.152-1_mips_24kc.ipk Installing kmod-scsi-core (4.14.152-1) to root... Collected errors: satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-scsi-core: kernel (= 4.14.152-1-
490392a6e1
)So I want to build that packages are missing with the same vermagic-hash: 4.14.152-1-
490392a6e1
)I do not know how to call this numbers from kernel:
490392a6e1
? I called vermagic numbers.I guess I can not install the missing packages: kmod-scsi-core and kmod-mass-storage because when I rebuild the packages it come with diferent vermagic-hash like:
5465465416
this not match with the first build of kernel vermagic-hash. Only same kernel version 4.14.152-1 but with this I still can not install it...HI I am trying to fix this issues, but still not found a solution, I started build librecmc from source then I am learning how this work at all. so the main issues is related on linux-kenel-hash.
make defconfig // will work but not worked in my case for some reason not knowing.
opkg --force-checksum install // kmod-scsi-core_4.14.152-1_mips_24kc.ipk kmod-usb-storage_4.14.152-1_mips_24kc.ipk FIXED to install the modules BUT the system it not load the modules
kmodloader: 4 modules could not be probed [ 19.161407] kmodloader: - scsi_mod - 0 [ 19.165213] kmodloader: dependency not loaded scsi_mod [ 19.202078] kmodloader: - sd_mod - 1 [ 19.207906] kmodloader: dependency not loaded usb-storage [ 19.213384] kmodloader: dependency not loaded scsi_mod [ 19.236085] kmodloader: - uas - 2 [ 19.239477] kmodloader: dependency not loaded scsi_mod [ 19.244716] kmodloader: - usb-storage - 1